Here are seven accessories to 3D Printing that I find myself using all the time. What are some of your favorites?
#daybetter #led #lightstrips #3dprinting
► SPONSOR ◀︎
Be sure to check out the Daybetter Smart LED Light Strips at geni.us/flYSeK4 and apply the coupon code H5XKZABP to save over $20 on your purchase!
📦 PRODUCTS IN THIS VIDEO 📦
• Isopropyl Alcohol (Paid Amazon Link): geni.us/Ae6EZ
• Scott’s Shop Rags (Paid Amazon Link): geni.us/2SIOw
• 6”/150mm Digital Calipers (Paid Amazon Link): geni.us/yS4YZs
• 12”/300mm Digital Calipers (Paid Amazon Link): geni.us/b8uD
• Raspberry Pi 3 B+ (Paid Amazon Link): geni.us/nerzs
• Raspberry Pi 4 1GB (direct fro Adafruit - least expensive, doesn’t include shipping): geni.us/BleBdW
• Raspberry Pi 4 2GB (Paid Amazon Link - least expensive one I found on Amazon): geni.us/bZnxa
• Daybetter Smart LED Light Strips (Paid Amazon Link): geni.us/flYSeK4 - Coupon Code: H5XKZABP
• Light Bars on Thingiverse: www.thingiverse.com/thing:311...
• Snips for 3D Printing (Paid Amazon Link): geni.us/M3syh1
• 7-Piece Plier Set (Paid Amazon Link): geni.us/PFt1hZN
• Leather Gloves (Paid Amazon Link): geni.us/WVtAo
• Variety Pack of Nozzles, 0.2 - 1.0mm (Paid Amazon Link): geni.us/DqKw3
• Full Size Hot Glue Gun (Paid Amazon Link): geni.us/CbT4
• Cordless Glue Gun [I need to get one of these!] (Paid Amazon Link): geni.us/CbT4
Links above are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
🔗 OTHER LINKS FROM THIS VIDEO 🔗
• OctoPrint: octoprint.org/
👍 SUPPORT THE 3D PRINTING ZONE 👍
You can supports us by joining the Channel Membership: / the3dprintingzone
or on Patreon: / the3dprintingzone
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• 3D Printed Bulletproof Stormtrooper: • 3D Printed Wearable St...
• OctoPrint for 3D Printing - A Simple Set Up Tutorial: • OctoPrint for 3D Print...
• 13 Things I Wish I Knew About 3D Printing: • Revised: 3D Printing -...
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / the3dprintingzone
Instagram: / the3dprintingzone
Twitter: / the3dprintingzone
TikTok: / the3dprintingzone
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
www.the3dprintingzone.com
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 Intro
00:20 Isopropyl Alcohol
00:55 Digital Calipers
02:52 OctoPrint
04:23 Smart LED Lights
07:17 Pliers & Snips
08:09 Hot Ends
09:36 Hot Glue Gun
The most important accessory is a backup 3D printer so I can repair my main printer
With some reasonably good 3D printers for $69 - that's not actually such a terrible idea!
@@SteveBakerIsHere homemade?
That's why I have two adding a 3rd. Once one fails I have more. It always seems to happen.
@@Cosanplayprops Yeah - I have two, I'm not planning on adding a 3rd - but that's only because I don't use them as a part of a job or a business.
Shit thinking outside the box
isopropyl is my favorite chemical ever since i got into airbrushing miniatures, soldering pcb's, cleaning my pc, cleaning 3d printer/machine/tool part. its such a versatile cleaning tool
Something that might be confusing for new people: What he calls "hotends" in this video are actually nozzles, they are something that goes into the hotend. Otherwise, great video!
Funny seeing you here! :3
@@tylerthefolf1856 I swear people from the server fine me everywhere...
@@squirrelrobotics who do we have here
LOL! Something that might be confusing for new people: What he calls "hotends" in this video are actually nozzles, they are something that goes into the hotend. Otherwise, great video! LMAO! Something that might be confusing for new people: What you call "the hotend" is the section that melts the plastic filament in the head of the 3D printer. The head is the part that sweeps across the surface to drop the hot melted plastic filament thru the nozzle installed at the bottom tip of the hotend. The actual mechanical name for the head is the 'extruder'.
@@DormantIdeasNIQ Many printers these days have external extruders so not all print heads are also extruders, many just consist of a hotend, nozzle, and cooling fan. The Ender series of printers, for example, use a bowden extruder that feeds filament through a PTFE tube into the hotend.
WHAT?! I've just been throwing away my failed prints -- and I have a pair of calipers already. Thanks for the tip!
i dont have the patience....i see failed print....get pissed....rip it off the bed and toss it.....then afterwards when logic comes back, im like dam.....i probably couldve saved that......o well happy printing broski!!
First 3d printer tool video ive seen that shows you actual useful stuff instead of dumb prints like little drawers to put on your printer. Good video!
I learned the hard way how important IPA (not the beer, though equally important) cleaning the print bed makes all the difference. When I first started out with 3D printing I started noticing poor bed adhesion, and quickly realized that nothing would stick to the exact spot where I would place my thumb to break my prints off the bed. When this finally dawned on me I decided to de-grease the print bed with IPA using a coffee filter. Coffee filters are lint free and therefore a perfect solution.
I can't believe I never thought of the hot glue gun trick! So simple yet so useful! When I think of the filament lost over the years because of poor bed adhesion... Also, turning your closet into a print center inspired me as well. Thanks!
Great video! One thing that I got recently was a 3D printing pen. Helps to fill in or fix tiny portions of a print without having to reprint the entire item. But, it does take some skill to do it neatly and it's hard to fill in a spot 100% (no holes) without a couple of layers.
Yeah it's about impossible to lay out plastic like a printer can right. I was pretty hesitant to buy a printer after playing with a 3dpen for a couple years, thinking the quality would be about the same.🤔 Glad I finally made the plunge and just bought one, awesome machines.
How expensive was the pen and was it worth it?
The pen was about $30. Worth it? That's very subjective. Took me a while to get my printer fine-tuned, but now that it is I haven't needed the pen as much.
@@BrianY well I was expecting it to be expensive in which case it’d be easier to objectively say if it’s worth it but I appreciate it. Ordered the anycubic kobra go and assume imma need the pen lol
I just got one, haven't used it yet, still about a month into 3D printing and figuring things out, but the purpose was to glue two printed objects together with the same PLA they were created with. Have you tried that yet?
That’s a great list. It’s also good for CNC’s and Laser cutters. I even use a lot of those in woodworking.
Great video! I use ALL these tools too. I actually use my hot glue gun to help with supports sometimes. I like to print statues and bust. The supports can be thin or sometimes ive had a support break off 6 hours into a 16 hour print. I hot glued a trash piece of PLA in place and it worked perfect. Nice thing about hot glue is it peels right off the prints without leaving any marks.
Great tips pointing out the print saving technique! it would be nice to see the trick in several slicers to cover more bases.
your videos have been so helpful, thank you!! I got a Crealty Ender 3 Pro from my husband for Christmas and he wanted to set it up the next day and start using it. I decided it was a better idea, since neither of us had even used a 3-D printer, to look for videos to get tips on the entire printing process. I watched videos from a few different channels and wasn't getting actuels tips and advice for someone with no real knowledge of 3-D printing. I finally found your channel and am so glad I did. Your videos are actually helping me understand how the software and printer communicate and how the printer uses the data to create an object. I can't tell you how much more confident in my ability to print I am. Thank you Nils!!
That’s so cool to hear! Best of luck to both of you - it sounds like you’re in for years of happy printing!
Dang he even muted himself when he said Alexa!!🤯
So considerate right
He did that so someone can't use a recording to trigger his devices and do malicious things.
@@chuckthetekkie it doesn’t work like that Alexa does not only listen to your voice. It does not only listen to its owner. I can say Alexa and his will go off you can say Alexa and mine will go off. Just the word Alexa will trigger it.
@@chuckthetekkie That's not true at all, and even if it was he literally said "Alexa" right before the clip so him muting himself in one instance and not the other would make no sense
A soldering iron for fusing prints together 👍
A lot of 3D printer tools can be 3D printed. I made a "radius gauge" - basically a set of flat pieces of plastic with a quarter-circular bump and a quarter circular-cutout in every size from 1mm up to 20mm. When you're trying to design something for 3D printing that has to mate up against some real-world object that has curved corners or whatever - these are PHENOMENALLY useful. I threaded all 20 of them onto a key-ring...super-handy!
Excellent tips, man! Thank you!
Cool shirt. Thank you for the good collection of tips. Cheers 👍😎🇦🇺
Thank you for these tips! . Upon your invitation to share: I myself use a 19" server cabinet.. this allows to buy 19: rack lights with 2 foldable arms, readily available and mounted with 2 screws. Also I use an internal 19"powerstrip. The printer is on an extendable drawer plate (standard available in server cabinets) I lined the server cabinet with acoustic foam (adhesive/mass/foam- three layer material). The filament goes through a hole in the 'roof', and is suspended on a loose alu stand with rubber feet for easy acces. The cabinet has 2 fans that can be ducted to the outside air (for non-pla printing). Most features are available in patch cabinet configurations, apart from the foam I suppose (akoustic shop) .
Too good! So much to take away from this.thanks!
Love your caliper trick to save the print, thats a great tip. And the hot glue gun thats a great idea i'll have to try that one.
Callipers are also vital for calibrating flow rate and first layer height.
@@iAmTheSquidThing And if you live in the USA - don't forget that you need METRIC calipers. I think most digital ones will switch modes - but I actually prefer the old-school dial calipers and I have four of them - imperial and metric - and in two different sizes.
I use a guitar pick quite regularly. It’s good as a scraper to remove thin bits from the builtplate, when flexing it wont do.
You are doing a really great job with this channel Nils! Thanks so much for the info!
Very kind of you, Frank! I really appreciate you watching :)
It's worth noting that PLA held near the glass point for extended periods may leave behind an extremely small amount of oils which build up overtime, often resulting in eventual but sudden complete refusal for first layer adhesion. It took me forever to figure it out the first time this happened as I never touch the bed. But, of course, a bit of iso cleared the issue right up.
Dang... Great Video! Definitely going to look into the Raspberry PI option.
9:47 you are a genius mate, i've been printing for like 4 years how have i never thought of this
I found a video last weekend where someone set up octoprint for an android phone. I got bored and tried to set it up, and it's been amazing so far.
I would also add diagonal nail clippers, you can use it to trim small unnecessary print or blobs specifically on tight spots.
Calipers for failed prints is a great idea! Thanks
thank you so much man !!!! made it easy for me :D great videos
Excellent tips! Some other useful tools I use: tweezers and deburring tool.
Textured steel build plate, PEI-coated, with matching magnetic surface. FR4 build plate with ferromagnetic foil, z-stop adjuster with micrometric screw, unwarped and insulated heat bed, good linear bearings, copper/titanium heat break (or some more modern one without a teflon liner), power cutoff box for powering down entire rig once octoprint shuts off.
Thank you! Great tips!
Hey Nils I am in a holding pattern waiting for my very first printer to arrive and have been devouring all your power user tips. I didn't realize how unprepared I am. I was too focused on selecting the right printer and not all the vast peripherals that is the next step. Thanks heaps.
youll be ok....most of us had no clue what the heck we were doing. I had no clue, but dove head first......If you apply yourself to learning the hobby its not that hard and quite rewarding actually!!! Good Luck broski!!!!
First thing I printed after my initial testing was printer tools and replacement parts before something went horribly wrong. Example of I don't have these tools yet, a rulers, hole gauges, torture tests, printer printable parts. These could help compare to diagnose and repair a problem.
kzhead.info/sun/lZylk92Sb4RpaIU/bejne.html&ab_channel=THEWAY
I saved a print once by rolling up a ball of tape and placing it where I forgot to add supports :) So Painters tape is always a good thing to have on hand
Great video, I need to stop putting off setting up my octoprint. It looks so useful.
I went on to use Mainsailos with Klipper firmware and never looked back.
@@pizzablender Sweet, I'm going to look into that.
6/7! But I just ordered those LED lights, so I'll give them a shot. Good tips.
That gluegun! I never would have thought it worked. Thanks. I've been struggling with my PET-G sticking to my bed.
Awesome pointers... Here's what I often use that are not already mentioned... - Q-tips to clean the ooze off the nozzle... (remove as much of the cotton as possible, only use the paper stick) - Razor blades to clean prints... - Razor scraper to clean glass print bed with glue stick - Painter's scraper to help pry off large prints - Round tip, LONG Allen wrench - Flashlight, to see parts, moving parts in dark areas such as under the moving bed plate - Small flat head screw driver... clean support located in closed tight areas of prints... - Small crescent wrench to hold the extruder block - Curved 6mm/7mm wrench to remove nozzle
I've never heard of the glue gun trick. Thank you
the hot glue gun trick I never thought of... great!
i remember snapping a knife on supports once, that was fun
8th must have accessory: this video.
The last tip sounds very interesting!
I find fret cutting pliers can be quite useful as they are meant to make flush cuts perpendicular to the handles.
A caliper can also be used for initial setup to make sure a benchmark print is accurate like "Chep's Cube" so you know quickly if your printer is properly trammed on all axis an all belts are properly tensioned.
This entire video was worth it for the glue gun suggestion. It'll pay for itself soon enough between the time and filament saved. Awesome work.
Digital calipers are also needed to calibrate your X, Y, and Z axis by printing a calibration cube. Most printers come set up pretty close, but you can adjust them to be dead on perfect in each axis. Good video.
Please don't do that. This is such a common misconception I stumble upon quite frequently.
@@ericvauwee4923 alright, then I guess I should just go die, then.
@@shaneofthehillpeople What
@@ericvauwee4923 Well, you told me not to do something, but gave me no alternative or reason. What's that alternative procedure? Is doing this harmful to the printer? Will it kill a panda if I continue to do it in the future? You claim it's wrong, but it seems to be a standard procedure in several places. Provide at least a minimum rationale. If you're an expert with their own series of how - tos, link the appropriate one. "I prefer to cook bacon in the oven." "That's incorrect and stupid."
OMG! This is the first time I don't have to shut my Alexa up after some youtuber talks about it. Thanks for taking care muting on 6:19, you've got my subscription for this gesture
The glue gun is an awesome idea I would never have thought of that thanks. Love the videos keep up the great work. 👌
I hadn't thought of the hot glue gun for tall prints. cool idea.
Also a Mosquito hotend is nice when changing the nozzles a lot, because its a one handed change and often can be done cold.
I have a cheap spatula I found at a thrift store that's thinner than any other print separator I've used. If you don't use a flexible bed, I would highly recommend finding the thinnest metal spatula you can.
2:15 the tiny little island killed me
If you print a lot in ABS, Acetone is a great thing to have. You can break down larger prints into pieces, mix some acetone and filament or scraps, and use the mix to glue the pieces together into a larger item. If you have a smaller print bed or just trouble with certain prints, it really helps out. It also helps if you have a large print that separates; you can patch the holes.
Now THIS was a great trick! Thanks a lot, I will go do CTRL-Z on the waste filament scraps that are now stuffed into the trashbin, and use it for exactly this purpose. Great tip!
Acetone is also highly carcinogenic and in some people can cause extreme dermatitis issues. Many workplaces have totally banned it because of these two issues alone. Just remember to have good ventilation with this stuff, gloves and face-mask. I'm speaking from personal experience here.
acetone carcinogenic, you must be kidding. The body makes it naturally and is sometimes in the bloodstream.
Great advice, thanks!!
I use a scraper from the kitchen to clean my glass plate!
The glue gun used on a print is a first I have heard of. Novel idea.
Yeah - I didn't quite get that one..."when it looks like it might slip" ??!? Either it slipped or it didn't - and if it slipped, there is no way you can glue it back down without causing a slayer shift. That said - gluing together bits of multi-part prints can benefit from hot glue - although cyanoacrylate (superglue) and an accelerator spray are generally a better choice.
Glue gun trick FTW!!!
I found that a pair of forceps are extremely handy to have.
wow. Great video. I am new to 3D printing.and a huge fan of star wars. Great tips man
Thanks for watching! Star Wars nerds unite!
Great video. I am using a filler gauge to check the distance of the nozzle to the bed. I like to have the ability to just grab it instead of looking for a piece of paper. The timelapse you show are beautiful. Can you share the way you set the camera, which camera you use, does the camera move along the z axis, how far from the bed it is placed...? Maybe a video on this topic?
Thanks so much. Yes, I’ll be working on an Octolapse tutorial before long. In the mean time, watch some videos on Octolapse - it’s an amazing plugin for the OctoPi.
I have some small brass wire brushes I use to routinely clean the residual filament off nozzles, and silicone socks to cover the rest of the hotend so it doesn't get dirty too. Acetone is useful to smooth or fuse together ABS or ASA parts, and sometimes to recondition certain printing surfaces (take care as it will also destroy certain other surfaces, so only use in accordance with the printer's instructions). Other plastics can be smoothed with very careful application of a hot air gun (note there is a very fine line between smoothing and warping or outright melting). Finally, an enclosure is useful for printing materials prone to warping, especially if the printer is somewhere with a low ambient temperature. It is possible to make one quite inexpensively; Prusa have instructions for enclosures you can make with two IKEA Lack tables, some acrylic sheet, a few screws, and 3D printed PARTS. The enclosures fit their MK3 and MINI printers, but will work with any printer that has an operating movement range that fits inside.
Glue stick. Works great to improve bed adhesion for glass beds. Easy to clean afterwards.
Might i add that calipers are great for leveling the gantry as well :) most lowcost printers tend to loose their "synch" in the z axis upong power cycles. I found that using my calipers to measure three times, take the average and disable the stepper motors from the control panel. Then i use my fingers to manually slowly turn the leadscrew to match the left and right sides. takes two or three attempts as adjusting one rod just 0.05mm WILL shift the gantry on the other side if you have a proper fastend and tight gantry that is :) . been doing this for while now and after doing so i always get a perfect first layer. no elephant foot at all.
The hot glue gun is a great idea, I've tried and failed to save prints using other methods before so that one is definitely getting added to the arsenal. Cheers!
I use masking tape for holding down corners that are starting to lift, works a treat. Just put a strip just in from the corner and it will print right over it no issues and that baby ain't going nowhere. Then you can cut the tape flush once it's done or even pull it out if you're careful. Got to make sure there's plenty of material either side of the tape but otherwise it's saved many a large print that was starting to warp on the corners
Great list; I actually have everything expect OctoPrint.
same here and im not in much of a rush to get one. I got mine dialed in pretty good and so I trust it a lot. Failed prints are going to happen whether youre there to monitor it or not. With that said, I still have more success than failures. But FAILURES WILL HAPPEN regardless of your level of knowledge on the subject at hand.
I've been using epoxy resin on prints that need to withstand abuse. I mix a small batch and apply a thin layer using a gloved finger/hand. For small prints, I'll use the 10min epoxy "glue" you can find at a hardware store.
Thanks for your video! The hot glue gun tip saved a print for me less than an hour after watching this! I used it to attach a loose tree support that was almost certainly going to break off and ruin a 16 hour print.
Nice!
Great tips! I think you just saved me 61% of a 26 hour print! My printer just stopped inexplicably and now, with the measuring and re-slicing method you explained, I've set it off to print the other 39%. Thank you sooo much! You earned a sub and like!! Just a quick question, what glue would you use for PLA?
Hey Bill, glad to hear it! I've heard lots of different types of glues being used, including using acetone, but I usually just super glue it.
I use plumbers plastic water pipe glue. It also gap fills really well.
You did something in this video that I can't appreciate enough. It is absolutely UNREAL how many people don't think to do this, don't give a shit, or just don't bother. The fact that you muted yourself saying "Alexa", is unbelievably considerate. Thank you for giving a shit.
I hate it when my echos respond to KZhead or TV uses of the word "Alexa" so I didn't want to be guilty of it myself :) Thanks for commenting, man.
Every time I use my calipers for 3d printing stuff I laugh, as my calipers cost almost the same a my 3d printer. Just find it funny!
I've got a pocketknife I sometimes use to help free prints. X-Acto knives dig into the bed surface too easily, and more flat edged objects can't get between the print and the bed. But a reasonably sharp knife gets to a nice middle ground.
nice
Do you really use a cutting pad as your print bed?! GENIUS!!
I love that you show your expensive calipers as you suggest a $10 pair that the mouth doesn't even set flush on
splurge and spend the extra $10 LOL
@@tehKap0w I've got some mitutoyo from my old machining job and it's hard for my to suggest anything less even though they're $120. Theyll definitely last longer than 12 of the cheap plastic ones and I can actually trust them
@@billallen6109 I hear you but kids gotta start somewhere. I think I actually have a set of plastic ones around here somewhere.
@@tehKap0w I didn't hate on them till I got a pair in my hand from the filament Friday kit thing chep sells. They just feel off. I couldn't justify calibrating a machine with a tool less accurate than the machine lol
@@tehKap0w I do get that everyone has to start somewhere though
A filament dryer should be on the list.
fishing line. For pesky prints that won't let go and you can find anywhere to slip a scraper underneath- use fishing line.
I’ve never heard that - great tip!
I wonder how many times someone has said (were glad to see you have come out of the closset) :) My super tip for Led strip lights that are the same lights as yours. is on the Creality Enders and others is that I slide them in either side of the V slots at the top bar and cut off the remaining length So I take out two of the top black plastic bungs/caps that is in the V slot ends at the top of the extruded aluminium ( the top cross bar) and feed the led strip though it, as fits perfect , the cabels/ controller can sit or tie up on the left side of the machine, Nice and tidy and looks like they were meant for the printer, you do get to see your print and bed very clearly.
Might I make a suggestion for tools, a deburring tool is really handy. Also a mini torch for cleaning up those spider web strings.
Elmer's Glue stick on bed were your printing, no rafts or skirts, or alcohol needed, glue washes off with hot water, comes off print and bed. I use a glass bed. I also do not wash it after every print and have waited a day or so between prints, just scrape it down as it builds and blow off the dust then reapply. The heated bed re-melts existing glue for a day or so then its time to clean.
“Getting the specs right” very good sir.
I use a 3mm mirror tile for a bed. Hairspray coated. PLA. 0.1mm first layer. 0.2 thereafter, 0.4mm nozzle. Great adhesion at 50c bed temp. After cooldown just lift the job off the bed. If still adhering, put in fridge a few minutes. Very consistent.
kzhead.info/sun/lZylk92Sb4RpaIU/bejne.html&ab_channel=THEWAY
Aren't those properly called "nozzles"? 😁 Thanks for this video, the Octoprint part was really eye opening. I was wondering how people made those animations. I've been using IPA in a different way, I print on glass (an old WanHao i3), I use a glue stick. After each print, I use a spray bottle with IPA and spray the surface. It dissolves the glue that's there and I smooth it out with a spatula. When it dries it's ready for the next print, no need to add more glue - when the bed heats up it drives off the remaining IPA.
great tips!
You should check out bondik UV glue pens. The pen style holder makes the glue much easier to apply, especially in small detailed areas. Flip the pen over and turn the UV light on and dries in seconds. Will come off the bed cleanly
That sounds awesome - gonna have to check that out!
I have been using Bondik around the house anmd for DIY projects for a few years now. In fact that's what sparked my interest in 3-D printing. I just got my first printer as a Christmas gift from my husband and so glad I found Nils channel before I set it up.
great video! you should make one explaining resolution prints as most printers says layer heigh...very confusing some times.
great tips... thanks
Thank you for muting the "Alexa" part :D great stuff!
Alternative to isopropyl: Spirit, very cheap and works as well - you also get it normally in a sprayer, making application easy
was making a keychain and the whole time i was cursing wishing i had some calipers because i kept printing too small. eventually i just scaled everything in blender and that worked but it did make it hard to go back and edit things that needed adjusting. but luckily orthographic view exists.
9:50 Using hair spray for better adhesion works wonderful for me, with stock bed
Fluidd/Mainsail + Moonraker + Klipper instead of Octoprint + Marlin. I'm pretty damn satisfied with these.
Great video Nills
Awesome tips
I always have a one or two heat blocks, heat breaks, heat block socks, and a spare heater cartridge and thermistor on hand. These things occasionally go bad and I like to be up and running immediately after a failure. Of course, they come in many flavors so be sure to get something compatible with your existing hardware. Nozzles are a consumable item as far as I'm concerned. I NEVER clean a nozzle. At the first hint of a quality issue I toss the old nozzle and put in a new one. If you buy them in bulk, say 30 at a time, you can get them for 25 cents each or less. I always have a set of cheap surgical forceps (hemostat) next to my printer. It's handy for grabbing that long string of ooze which seems to form just before starting a print. They come in handy for fishing out nuts and bolts which always seem to land in an inaccessible place. Four or five bucks on Amazon. The other thing I wish I had done sooner is learn how to compile a Marlin build. Once you break free of propitiatory firmware you can take advantage of inexpensive mother boards from a wide array of vendors which most likely have features your inexpensive factory board lacks. And you can add/swap a Z axis probe, add fancy firmware controlled fans, and control just about every aspect of 3d printing using the latest and greatest version of Marlin. Want to try a new extruder or add linear rails? No problem if you can work with Marlin. The latest version of Visual Studio Code gives you the ability to make custom Marlin builds much easier than a few years ago and there are many great KZhead videos to show you how. Want Linear Advance but the maker of your printer doesn't offer that as an option? Make your own Marlin build. It's really not difficult.
Hi the 3d printing zone name is cool. What software did you use to design it please??. Great channel. I'm new to 3d printing. And have leant alot from your videos.. cheers and keep up the good work.
Calipers in micrometers are also very useful when calibrating a new filament or a new printer. I think all of those tips and tricks were good besides one that pertain to the clippers I myself would not advise anyone to use a clippers to cut ooze out of a nozzle especially beginners because they have a higher chance of clipping a portion of the nozzle and even a fine layer or dent will cause extrusion issues. Just my quick two cents. I do think a lot of the video was pertained to lighting and videos but I think a good thing to add would be like Auto bed leveling sensors 3D printed modifications like Purge buckets, other spare parts that might wear such as belts and bearing Wheels, some other tools like a brass wire brush and a nozzle clogged kit, I think another thing for me when I was beginning I think getting a 4 hardened steel nozzle in the beginning would have saved me a lot of trouble with clogged brass nozzles, when it comes to the bed if you have a removable bed it's always nice to have a spare that's in good quality, having some other equipment to help better adhesions such as aquanet hairspray and possibly glue sticks.
the glue gun and re-slicing to a new height to save the print are things I havent even thought of before!
Thank you.