Rare Double Cleaver [Black Blade With Kingwood Handle]

2023 ж. 22 Жел.
2 658 007 Рет қаралды

Anyone who likes old, rare things will love this restoration. I'm restoring an rare antique double cleaver! I have to work a lot on the lathe, grinding, drilling, thread cutting, working with chemicals and a lot more... I had to replace the old handle with a new one, this time made of kingwood. But I also worked with steel and brass. In the end, the antique cleaver will somehow look old and new! Stay tuned, and have fun watching!
▶ What did I do?! ◀
After dismantling the old, very rare hatchet, I placed the blade in a bath of rust remover. To prevent the blade from rusting, I treated it with iron(III)chloride. I made the new wooden handle out of kingwood and also made new caps out of brass. I made the entire handle on the lathe, so if you like working on the lathe, this is the project for you! Because I deliberately left the pitting, the double cleaver has a unique look, somehow new and old at the same time. With the knowledge that the wooden handle is made of “kingwood”, the unique cleaver immediately takes on a mystical character. I love it!
▶ Good to know ◀
I used the following tools: hammer, pin punch, box, rust remover, wire brush, belt sander, saw, center punch, cordless screwdriver, drill, tap, cutting oil spray, orbital sander, iron(III) chloride, steel wool, lathe, lathe chisel, center drill, boring bar, 1mm milling cutter, milling machine, sandpaper, tweezers, ruler, pencil, file, glue, isopropanol, cotton buds
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do this here:
/ @forgottenshinerestora...
Do you like what you saw and want to help the channel develop further? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material to work with:
Metabo bench grinder: amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV
Metabo bit set: amzn.to/3pzwV4n
Rust remover: amzn.to/3vdQ52f
Pin punch: amzn.to/3NEn1qX
Iron(III) chloride: amzn.to/3GXSb93
Boring rods: amzn.to/3TFFOWD
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links cost you nothing, I only receive a small share from the seller, you have no disadvantage.
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share, please!
Thank you!

Пікірлер
  • I'm a traditionalist, so I'm glad that this wasn't titled as a restoration since many of the original parts were replaced with modified components.

    @jeffburnham6611@jeffburnham66114 ай бұрын
  • The screw not sitting flush would bother my OCD but the handle is beautiful and I love how you got the blade darkened. Greeat job.

    @jdean3305@jdean33054 ай бұрын
    • I don't know if you've ever done any metal work, but him dipping it in the acid was the easiest thing he did on that build. It looks nice, but also it helps keep the steel from rusting. You don't even need the acid, because some people just use boiling vinegar, and it does the same thing after a few dips. I do it all the time.

      @Danielson1818@Danielson18184 ай бұрын
  • That turtle always lends support and makes me smile 🐢

    @38kari@38kari3 ай бұрын
    • Thank you very much, I'm very happy if you like my videos!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын
  • Блин, взять дюймовый пруток латуни и сделать винт М5... Я отстал от понимания всего этого. Твой "Потому что могу" родил этот коммент. Продолжай дальше.

    @lunarfarmer2716@lunarfarmer27164 ай бұрын
    • Творчество 🚀

      @ZhurkoSander@ZhurkoSander2 ай бұрын
    • WOW 😮 This man Turns an Wooden Stick into an Amazing Tool for Nose Piercing a CALF : kzhead.info/sun/hq-DmLl5oad7rGw/bejne.html

      @AkshayKumar-rz1uc@AkshayKumar-rz1ucАй бұрын
  • Nice restoration but I think the screwhead looks a little brutal, maybe better to have been a dome shape?

    @harrygatto@harrygatto4 ай бұрын
    • Nah

      @meganek0597@meganek05974 ай бұрын
    • I agree and I also feel the brass parts should be flush with the wood of the handle.

      @jeffbaranowski6695@jeffbaranowski66954 ай бұрын
    • I would have loved to see so.e glue in the hole and then filed it flush with the end so it looks like nothings there

      @omarkennedy7056@omarkennedy70564 ай бұрын
    • That's right, I admit that I actually had a completely different plan, I wanted to do away with the screw completely. But I liked it so much here that I left it.🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Veselé Vánoce tobě i želvičce. Pavel 🇨🇿

    @pavelkoudele5526@pavelkoudele55264 ай бұрын
    • Зі святом Чехія!!

      @user-dy2xu7vj5g@user-dy2xu7vj5g4 ай бұрын
    • ​@@user-dy2xu7vj5gспокійні свята 🇺🇦

      @pavelkoudele5526@pavelkoudele55264 ай бұрын
    • Děkujeme! Veselé Vánoce a zdravý nový rok i vám! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • this is what i needed to see today; lets get this restoration party started xD

    @mundea@mundea4 ай бұрын
    • Same 😂

      @rulitogg@rulitogg4 ай бұрын
    • have a lot of fun 😁👍🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Beautiful work. The original brass rings would have been heated and then shrunk onto the wood, causing interference fit. This could have been a stronger fastening than machining a solid billet and bonding the wood to the axe. Beautiful turning work though.

    @Devlington87@Devlington872 ай бұрын
  • You have recovered wonderfully. They look much nicer. Well done. That's always a great thing.👍👍👍👍

    @RestorationVideo@RestorationVideo4 ай бұрын
    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Nice restoration, thank you.

    @bernardmcmahon7434@bernardmcmahon74344 ай бұрын
  • That was great, thanks! You put a lot of effort into creating this wonderful work ❤

    @MRTEKNIQ-jq8vn@MRTEKNIQ-jq8vn4 ай бұрын
  • Cleaver be lookin' hella dope, Forgotten Shine Restoration!

    @geraldstamour1312@geraldstamour13124 ай бұрын
    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • That was awesome, thanks! I love the colour of the wood you chose for the handle ❤️

    @melszymanski17261@melszymanski172614 ай бұрын
    • Thank you, nice that you like it🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I loved the small details of removing excess glue

    @insanerator651@insanerator6514 ай бұрын
    • Thanks! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • You got to respect both the modern and the older workmanship... Modern is beautiful, older is rustic... But older times they didn't have any power tools... It was all hand made... literally blood and sweat went into it.

    @kapeel2008@kapeel20084 ай бұрын
  • Absolutely stunning

    @strawz007@strawz0072 ай бұрын
    • Thanks a lot! 🐢

      @ForgottenShineRestoration@ForgottenShineRestorationАй бұрын
  • Looks like the melee weapon in Quake lol

    @hummakavula8062@hummakavula80624 ай бұрын
  • I love you and ur my favorite KZheadr ever!!!!!! Post more please❤❤❤❤❤❤❤❤❤I look forward to you’re videos every day!!

    @sophiaboone6850@sophiaboone68503 ай бұрын
    • Thank you very much, I'm very happy if you like my videos and projects! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын
  • Loved it!

    @Babimariac@Babimariac4 ай бұрын
  • A vous tous et à Tortue : je vous souhaite de très bonnes fêtes de fin d'année !🎉🎉🎉🎉

    @Ichka-nq1ct@Ichka-nq1ct4 ай бұрын
    • Merci beaucoup, nous te souhaitons également un joyeux Noël et une bonne année !🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I loved the result and truly admire your video 'style'; it's both clear/informative and, somehow, comforting to watch. I had never heard of kingwood and looked it up; it's a type of rosewood. Excellent grain.

    @condar419@condar4194 ай бұрын
    • Thank you very much, it's great if you like it! The wood is really great and goes really well with brass...🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Awsome job! I was wondering about the handle. Was there any reason why the handle wasn't epoxied on, along with the fastener? It didn't look like a very close tolerance fit when you slid the handle on. Just wondering...Thanks great video!

    @deerslayer6419@deerslayer64194 ай бұрын
  • Magnifico resultado. 😅🖐🏻.

    @cepecepe5379@cepecepe53798 күн бұрын
  • Przepięknie jest odrestaurowany ten stary zabytkowy nietypowy toporek pozdrawiam serdecznie 👍👍👍👍

    @andrzejporeda7281@andrzejporeda72814 ай бұрын
    • Dziękuję bardzo, cieszę się, że ci się podoba🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
    • ​@@ForgottenShineRestorationbo jest to bardzo fachowo odrestaurowane pozdrawiam serdecznie 👍👍👍👍

      @andrzejporeda7281@andrzejporeda72814 ай бұрын
  • The complexion of the wood for the handle is quite fetching. Especially up against the shiny brass end caps.

    @vanpenguin22@vanpenguin224 ай бұрын
  • Mr Turtle is always employee of the month

    @granthawtree4669@granthawtree46693 ай бұрын
    • 🤣🤣🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын
  • Wieder mal eine erstklassige Arbeit ! Ich wünsche Dir und Deiner Familie einen guten Rutsch und ein erfolgreiches 2024 !

    @andreasm481@andreasm4814 ай бұрын
    • Vielen Dank! Dir und deiner Familie wünsche ich auch ein gesundes neues Jahr! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I just found your videos. You do lovely work. I love your turtle friend! ❤

    @nickize3146@nickize31464 ай бұрын
    • Thank you and welcome! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I had to look up king wood, it made a beautiful handle.

    @darilynkrupp6309@darilynkrupp63094 ай бұрын
  • Tolle Arbeit ! Frohe Weihnachten 😊🐢🎄

    @jlindskog5141@jlindskog51414 ай бұрын
    • Vielen Dank! Frohe Weihnachten! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • There was a reason why the original handle wasn’t round. An oval cross section in the handle allows the user to index it it their hand and know the direction of the blades without having to look at it. This blade is obviously to hang on a wall and will probably never see any practical use, but you should still understand a tool before “restoring” it. You also significantly weakened the handle by removing all that metal at the top, but again…wall hanging.

    @jeffreynerdin3522@jeffreynerdin35224 ай бұрын
    • Amazing Jeff

      @micgreenson7308@micgreenson73084 ай бұрын
    • Exactly my thoughts, nice skills but that clever will never be used as a tool again. His hollow handle is kept together only by that little screw. I have never seen a handle made like this honestly. But again, nice looking

      @kemaldzinic-meyer9647@kemaldzinic-meyer96474 ай бұрын
    • Bet you're fun at parties.

      @itstricky73@itstricky734 ай бұрын
    • @@itstricky73 at least my boy Jeff is interesting, you sound like one of them at a party everyone walks away from 🙃😉

      @micgreenson7308@micgreenson73084 ай бұрын
    • It's incredibly easy to know the direction of the blades without looking at it. All you have to do is hold it and you can feel the direction the weight is pulling you. Weight distribution is how your brain knows how to orient your own body. Your brain is designed more for that than for touching.

      @Kyle-nm1kh@Kyle-nm1kh4 ай бұрын
  • Video quality is so good. Nice to see small details

    @user-nn2ej5ow1h@user-nn2ej5ow1h4 ай бұрын
    • Thank you for your great feedback! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Absolutely beautiful 😊😊

    @MASI_forging@MASI_forging4 ай бұрын
    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Thankyou for the video, nice work.

    @willynthepoorboys2@willynthepoorboys24 ай бұрын
    • Thank you, too! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Why i am watching this at 3am?

    @satyambaranwal8101@satyambaranwal81013 ай бұрын
    • Cus ist cool :)

      @AmericaPrime711@AmericaPrime711Ай бұрын
    • Because you are stoned

      @greendijk5117@greendijk5117Ай бұрын
  • Beautiful restoration mister good job well done

    @vinceianni4026@vinceianni40264 ай бұрын
    • Thanks! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Gorgeous work 🥇 thank you for leaving the patina, time marks of the steel and also perfect color of wood 👏🏻👏🏻

    @byOldHand@byOldHand4 ай бұрын
    • Thanks too! Nice that you like it 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • looks like the main body is wrought iron. the edges are probably high carbon steel forge welded on.

    @mulepowerforge@mulepowerforge4 ай бұрын
    • Definitely. You can see the difference in sparks while he's grinding the top contour. I let out a "Nooo!" when he took an orbital sander to the grain of the wrought iron. Still turned out great.

      @walnutt22@walnutt224 ай бұрын
    • WOW 😮 This man Turns an Wooden Stick into an Amazing Tool for Nose Piercing a CALF : kzhead.info/sun/hq-DmLl5oad7rGw/bejne.html

      @AkshayKumar-rz1uc@AkshayKumar-rz1ucАй бұрын
  • Besides how incredibly awesome this video is, you made me realize I need a smoking oven incense burner in my life.

    @Peepo_Toes@Peepo_Toes4 ай бұрын
    • Thank you! 🤣🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Я получил удовольствие наблюдая за работой профессионала😊

    @user-lz7rv4so8p@user-lz7rv4so8p2 ай бұрын
  • Outstanding!

    @lloydoliphant4965@lloydoliphant49654 ай бұрын
    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Looked like the harden steel was almost all gone on one side It looks great and you did a wonderful job restoring it as well!!!! I enjoyed your video so I gave it a Thumbs Up

    @oneshotme@oneshotme4 ай бұрын
    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
    • I think cleavers and other kitchen knives have hardened steel only on one side

      @msharp6887@msharp68874 ай бұрын
  • That handle is gorgeous!!! I've never seen wood like that, it's amazing! I also especially loved that shot of your hand reflected in the rust remover, very ominous and dramatic! And thank you again for all the informative captions 😊 Happy holidays to you and turtle! 🐢🐢🐢

    @-c3202@-c32024 ай бұрын
    • Thank you, Nice that you like it🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Really fun Greetings, my friend

    @TOMMYRestoration@TOMMYRestoration4 ай бұрын
  • I’m curious as to how you recycle/repurpose all the metal filings.

    @user-nk6if2pi3x@user-nk6if2pi3x4 ай бұрын
  • Love the color of the handle. And as always loved seeing Turtle. Where was Turtles are 🐢 friend?❤

    @lucieleimbach@lucieleimbach4 ай бұрын
    • Thanks, glad you liked it... turtle's friend was kind of upset, maybe they had an argument... 😱😅🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • e Arzgebaarcher uhne Drachselbank , wos es alles gibt! Trotzdam gut geworn! ❤

    @randymarsh4733@randymarsh47334 ай бұрын
    • 🤣 Ich komme nicht aus dem Erzgebirge aber bin ziemlich nah dran... Aber natürlich habe ich eine Drechselbank, nur diesmal wollte ich es eben auf der Drehmaschine machen😅🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Another gorgeous restoration! Merry Christmas!

    @stephenjohnson6841@stephenjohnson68414 ай бұрын
    • Thank you very much! Merry Christmas!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • ¡Qué preciosidad! La madera del mango es muy bonita. Un saludo desde España para ti y para 🐢. ☺️

    @user-ju9nd4ds2q@user-ju9nd4ds2q4 ай бұрын
    • ¡Gracias! Me alegro si te gusta 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • ther reason it looks like wood is because that piece of metal was the result of folding and forge welding and stretching and repeating bunches of time, likely incorporating many recycled chips and maybe old nails or whatever. that looks a hell of a lot like pre industrial revolution forging to me. what a beauty. thanks for giving it that old shine back. definitely deserves it. as a hunter of elk and mule deer i would find this beastie incredibly useful.

    @joshschneider9766@joshschneider97664 ай бұрын
    • Thank you for your feedback, do you really think it's that old? 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
    • If it’s old enough, it’s more likely that is a wrought iron body with hardenable steel forge welded onto the cutting edges. Wrought iron looks like wood grain, just as this one does.

      @CaptainTwitchy@CaptainTwitchy4 ай бұрын
  • Блестящая реставрация, очень рад что оставили не тронутой фурнитуру лезвия. А рукоятка бесподобная красота. Спасибо за видео и перевод, лайк однозначно🙏

    @user-dz8dg6ey8g@user-dz8dg6ey8g4 ай бұрын
    • Спасибо, я рада, что вам понравилось! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Well done❤️❤️❤️❤️❤️👍🏻👍🏻👍🏻

    @Famous_restoration@Famous_restoration4 ай бұрын
    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • You never said liquid use for derusteent

    @deedlehill7896@deedlehill78964 ай бұрын
  • Restaurada machadinha dupla 😉

    @jailsondasilva223@jailsondasilva2234 ай бұрын
  • Very nice work F.S.. I love that wood, it almost looks to expensive for the clever... Thx for bringing us along.. Here's wishing you a very Merry Christmas and Happy New Year.. Take care my friend...

    @garyjones2582@garyjones25824 ай бұрын
    • Thank you so much for your feedback! I also wish you a Merry Christmas and a Happy New Year!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • You are very artistic ❤❤❤

    @DrewJacobson61@DrewJacobson614 ай бұрын
    • Thanks! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Brawo coś pęknego poprostu SUPER dziękuję M.J

    @justa1265@justa12653 ай бұрын
    • Dziękuję bardzo!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын
  • Привет! Я из России! Ты очень хороший Мастер! Честно, я восхищаюсь твоей работой! Ты настоящий профессионал своего дела! Желаю тебе успехов!

    @user-tk5eq7nm9e@user-tk5eq7nm9e20 күн бұрын
    • Большое спасибо!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 күн бұрын
  • Very interesting, thank you

    @DavidHarperAntiquesTV@DavidHarperAntiquesTV4 ай бұрын
    • Thank you, too! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Подскажите,что за химия для очистки металла использовалась?

    @sergynok@sergynok4 ай бұрын
  • What do you do with all the metal shavings?

    @jpmzo@jpmzo3 ай бұрын
  • Nice Restoration 🐢

    @SpartanONegative@SpartanONegative4 ай бұрын
    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Nice restoration

    @bobbymeadows9373@bobbymeadows93734 ай бұрын
    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Quando tem vídeo novo seu é uma alegria. Você é muito bom. Sua organização é um diferencial incrível. Feliz Natal e feliz ano novo pra você e sua família. E poste mais vídeos pra gente🤩🐢

    @janainafernanda32@janainafernanda324 ай бұрын
    • Obrigado! Desejo também a você e sua família um Feliz Natal e um Próspero Ano Novo! É sempre bom ler de você! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I need it!!

    @drasiella@drasiella3 ай бұрын
  • Incredible restoration sir, thanks for sharing this video. Instead of using the FeCl, could you have electroplated nickel to avoid future rust? Wishing you and your family a blessed holiday season. Peace

    @catgynt9148@catgynt91484 ай бұрын
    • Thanks for the tip! I also wish you a Merry Christmas and a Happy New Year!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Very good! I'm from Americana SP - Brasil.

    @user-if6tx3iy1p@user-if6tx3iy1p4 ай бұрын
    • Thank you, I'm from Germany. 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Wife: Whats for dinner. Husband *busy cleaning the cleaver: Not sure yet

    @craigmiesterable@craigmiesterable4 ай бұрын
    • 😱😱😱🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • All I can say is well!!!. Michael Herrell

    @nadineherrell5426@nadineherrell5426Ай бұрын
  • Very good restoration results 👍👍

    @tukangumpruk4546@tukangumpruk45464 ай бұрын
    • thanks a lot! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Я погляжу черепахи в вашем регионе любят ароматерапию в зимний период! 😂 Рукоять топора мне очень понравилась. В отличие от самого топора! Форма у него неказистая 🤷‍♂️

    @user-brobdingneg@user-brobdingneg4 ай бұрын
  • А какой химией пользуетесь?

    @olqaabrosimova3535@olqaabrosimova35352 ай бұрын
  • That handle is so beautiful! Happy Holidays to you and Turtle. I hope you are both safe, warm, and surrounded by loved ones!

    @TheGelasiaBlythe@TheGelasiaBlythe4 ай бұрын
    • Thank you very much, we wish you exactly the same!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Trabalho com o cabo de madeira foi lindo, mas não combinou com a lâmina. Parabéns

    @Wanderleyws@Wanderleyws3 ай бұрын
  • Turtleeeeeeee!!!

    @mundea@mundea4 ай бұрын
    • 👑🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • I believe you're from Germany, right? My cousin lives in Münster and she told me about how incense burning and candle lighting are a huge thing there. ❤ Oh, and happy holidays from Brazil!

    @kelcesar@kelcesar4 ай бұрын
    • That's right, I'm from Germany! Smoking men are really popular here. Happy holidays and a happy new year to you too!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • TURTLE

    @6_nikki_9@6_nikki_94 ай бұрын
    • 🐢👑

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • What rust remover did u use????

    @David-tk2kh@David-tk2kh16 күн бұрын
  • Fascinating watching you turn wood on a metal lathe.

    @johnkingery403@johnkingery4034 ай бұрын
  • Your work gives me peace❤️❤️👍🏻

    @Famous_restoration@Famous_restoration4 ай бұрын
    • I am very pleased! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • It's ideal. Thank you for this)

    @user-wo7uk8uo1j@user-wo7uk8uo1j2 ай бұрын
  • Very nice…Merry Christmas

    @charlescorris3469@charlescorris34694 ай бұрын
    • Thank you, Merry Christmas!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Would have been cool to make the screw a loop for hanging. Otherwise looks great.

    @SilverMKI@SilverMKI4 ай бұрын
    • Cool idea! My plan was actually to file away the screw, but I liked it better this way...🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • nice, you can cut 2blocks, simultaneous stroke, One on the down stroke.. One on the up stroke 😅..

    @-wotiu_77@-wotiu_774 ай бұрын
  • I have never seen those types of cutters. Also.....do you save your brass shavings?

    @JoSmotherman@JoSmotherman4 ай бұрын
    • Yes, I'll collect the brass and give it away later 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Kapak Naga Geni 212 milik Wiro Sableng 🤣

    @macbulrustam1664@macbulrustam16642 ай бұрын
  • Erste Sahne! ❤ Für was würde so eine Axt benutzt? Nie gesehen vorher.

    @alexanderalbach468@alexanderalbach4684 ай бұрын
    • Vielen Dank, ich gehe davon aus, das es in der Küche benutzt wurde.. 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • А где купить такую печку ?

    @user-pu5gp4zv6k@user-pu5gp4zv6k2 ай бұрын
  • Complimenti, ottimo risultato...! Qual è la tua regione???

    @robertogrieco9554@robertogrieco95544 ай бұрын
    • Grazie! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Gorgeous restoration, as always! Thank you for the small peek into the holiday traditions in your part of the world. i hope you, Turtle, and your family have a lovely holiday and a Happy New Year!

    @piparalegal2019@piparalegal20194 ай бұрын
    • Thank you very much, I'm glad you enjoyed it! Merry Christmas and a happy new year to you too🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • wow, it looks like it was made by a perfectional!

    @jacktheredd7735@jacktheredd77354 ай бұрын
    • Thank you for your great feedback! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Krásná práce 👍👍👍👍👍👍👍👍

    @miloslavtomek-cp3fh@miloslavtomek-cp3fh4 ай бұрын
    • Moc vám děkuji! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Good job buddy Merry Christmas 😇🙏👍🏻🇻🇪🎁🎅

    @TheJcochrane@TheJcochrane4 ай бұрын
    • Thank you very much, Merry Christmas!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • 👏👏👏👏👏👏

    @juanjaviersamanojimenez1739@juanjaviersamanojimenez17392 ай бұрын
  • Round axe handles are prone to slipping in the hand during use.

    @lianbozhang1260@lianbozhang12604 ай бұрын
  • Wrought iron?

    @bloodgout@bloodgout4 ай бұрын
    • Yes... 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • No bras polish? Sad. But result is still awesome!

    @gexproof3222@gexproof32224 ай бұрын
  • You are so wonderful, I want to ask you something, can I know the name of the rust remover water you poured on the axe at the beginning?

    @hayatdevam.ediyor@hayatdevam.ediyor4 ай бұрын
    • Thanks! I used this one, it works very well! amzn.to/3vdQ52f 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Awesome Work...I love the wood, where did it grow up?

    @NaicoMC@NaicoMC4 ай бұрын
    • Thank you, it most likely comes from Brazil🐢

      @ForgottenShineRestoration@ForgottenShineRestoration4 ай бұрын
  • Why you not test it?

    @raihanfarrelofficial@raihanfarrelofficial4 ай бұрын
KZhead