KZhead
Ғылым және технология

Biggest Cleaver In The World Restoration

Forgotten Shine Restoration
2024 ж. 2 Ақп.
193 999 Рет қаралды
Жүктеу

This is by far the biggest cleaver I've ever seen, I'd almost say it's the biggest in the world. We are going to restore this giant in this video. I will hardly use any new materials in the restoration, only what is no longer talkable. Just see for yourself...
▶ What did I do?! ◀
After removing the old wooden handle from the blade of this huge cleaver, I worked the metal on the belt sander and sanded off the rust. I then sanded the surface with the random orbital sander before polishing the blade on the polishing stand. I made the pins and the corresponding nuts on the lathe and the milling machine. Furthermore, I had to replace one end of the handle with brass, as the wood was broken at this point. Finally, I glued and screwed everything together and adjusted it with files and sandpaper. The handle was treated with linseed oil varnish.
▶ Good to know ◀
I used the following tools: Multi-function tool, scriber, screwdriver, drill, pliers, milling cutter, pin punch, hammer, belt sander, random orbital sander, polishing block, polishing paste, lathe, lathe chisel, thread cutter, saw, files, sandpaper, two-component adhesive, cotton buds, isopropanol, linseed oil varnish
▶ Special thanks to my channel members! ◀
-
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do this here:
/ @forgottenshinerestora...
Do you like what you saw and want to help the channel develop further? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material to work with:
Metabo bench grinder: amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV
Metabo bit set: amzn.to/3pzwV4n
Rust remover: amzn.to/3vdQ52f
Pin punch: amzn.to/3NEn1qX
Two Part Adhesive: amzn.to/482k6Q0
Polierpaste: amzn.to/481hxhk
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links cost you nothing, I only receive a small share from the seller, you have no disadvantage.
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share, please!
Thank you!

Пікірлер

  • "That's not a knife. This is a knife." - Crocodile Dundee 😂

    @xtender5@xtender53 ай бұрын

  • Can't describe the pleasure I get after watching such restorations ❤

    @kajaljha52@kajaljha523 ай бұрын

    • I'm glad if you like it!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Nice to see you turtle. I’m glad you didn’t have haters. You are my favorite restorer. ❤🐢

    @lucieleimbach@lucieleimbach2 ай бұрын

    • 🐢❤👑

      @ForgottenShineRestoration@ForgottenShineRestorationАй бұрын

  • One of the greatest knife restoration I've watched in KZhead！You used most of the old parts including the original handle but make it brand new and keep the original shape. Well done！

    @LouisLeeKH@LouisLeeKH3 ай бұрын

    • Thank you for the wonderful praise! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • These videos are amazing!! I've always had trouble falling asleep but they videos are so tingly. I think i've found my favorite channel

    @Teeny_Tiny_Tuber@Teeny_Tiny_Tuber3 ай бұрын

    • Thank you, I'm glad if you like it! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • I'm trying to imagine using that cleaver. It's probably longer than my arm! It looks stunning at the end!

    @TheGelasiaBlythe@TheGelasiaBlythe3 ай бұрын

    • Yes, that's really long, over 80cm. I don't think you need this at home😅🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

    • @ForgottenShineRestoration It's over half my body length! It's almost a spear! Still, I would love to see that hanging on the wall in someone's kitchen.

      @TheGelasiaBlythe@TheGelasiaBlythe3 ай бұрын

    • Bone cleaver I'd imagine, if it didn't cut it it would smash it

      @stumagoo5433@stumagoo54332 ай бұрын

    • @stumagoo5433 Hulk smashing bones sounds messy but fascinating. I've only ever seen bone saws (manual and electric).

      @TheGelasiaBlythe@TheGelasiaBlythe2 ай бұрын

  • It tickled an itch in my brain 😅❤

    @kajaljha52@kajaljha523 ай бұрын

  • Beautiful result! And I'm such a sucker for reflection shots, they were gorgeous! I also must say that I love the new camera angles on the lathe. My brain really struggles to figure out which way is down when looking at the other angle 🐢

    @-c3202@-c32023 ай бұрын

    • Thank you for the praise and feedback, I'm glad you like it! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Stumbled upon your channel this evening and just couldn't stop watching. You sir are an artist theres no other word for it... great job and great videos.

    @norman9076@norman9076Ай бұрын

  • thank you for the wonderful restoration sir ❤👍

    @tigran1087@tigran10873 ай бұрын

  • The brushed accent pieces on the ends are a gorgeous touch!

    @prettiep@prettiep3 ай бұрын

    • Thank you very much, I'm glad you like it!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Dope AF results, @ForgottenShineRestoration!

    @geraldstamour1312@geraldstamour13123 ай бұрын

  • It’s “almost” too beautiful to use, but it was built for a purpose and I hope you get to use it!

    @SynicalDan@SynicalDan3 ай бұрын

  • That knife clearly dreams of being a naginata! It's so big with such a long handle! What was it made to cleave!?

    @TheAsvarduilProject@TheAsvarduilProject3 ай бұрын

    • A pig, it's called a hog splitter

      @nexusvalintines1503@nexusvalintines15032 ай бұрын

  • Loved this, absolutely love the transformation 🙏🙏🙏🙏

    @Jako-fh8zg@Jako-fh8zg3 ай бұрын

    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Oh, I'm happy to see turtle is having a good time with her date 😊

    @kelcesar@kelcesar3 ай бұрын

    • 🤣😅🥰❤🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • 17:52 Wow! that was a perfect slice!

    @Lil_princess962@Lil_princess9623 ай бұрын

    • 🤣🤣👍🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

    • @@ForgottenShineRestoration Great video by the way. 🤣🤣🤣

      @Lil_princess962@Lil_princess9623 ай бұрын

    • @@ForgottenShineRestoration Also scares me

      @raihanfarrelofficial@raihanfarrelofficial3 ай бұрын

    • @@raihanfarrelofficial What scares you? 🤔🤔🤔

      @Lil_princess962@Lil_princess9623 ай бұрын

    • @@Lil_princess962 That slice smash it

      @raihanfarrelofficial@raihanfarrelofficial3 ай бұрын

  • Video mt bom

    @EliasSilva-ds3ce@EliasSilva-ds3ce3 ай бұрын

  • Very nice, nice sandpaper transition and brass work👍

    @CrustyRestorations@CrustyRestorations3 ай бұрын

    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • 🤯🤯👍👍👏🏻👏🏻 now that cleaver looks amazing 👍 your skills are amazing 👏🏻 👏🏻👏🏻👏🏻👍🍻🍻🇺🇸

    @jamesniess2485@jamesniess24853 ай бұрын

    • Thank you very much! 🐢🤩

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Apparently that thing is the answer to life, the universe, and everything 🤷‍♀️

    @HannahMattox@HannahMattox3 ай бұрын

  • That is a very nice hog splitter. But other than making a mess in the shop with a watermelon, or hanging it on a wall, what would someone use it for? Just about anything that you would cut with it, including watermelon, would discolor the blade, and it would need polishing again. Conversation piece maybe?

    @brandynpetersen8017@brandynpetersen80173 ай бұрын

  • This reminds me of White Beard from ONE PIECE ^^ Great Job ^^ This was an awesome restoration

    @ammarzakariya9379@ammarzakariya93793 ай бұрын

    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • the result was really stunning, and it was really cool to see you reuse the handle wood. one question though - did you consider just cleaning up the handle rather than rebuilding it? the handle looked beat up but serviceable. was there something wrong with it that couldn't be repaired?

    @cgautreau1@cgautreau13 ай бұрын

    • Thanks for the praise, no I just wanted to clean it because there was still enough material available🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Looks like a weapon from the game kenshi. Also love your filming skills, very good camera effects and setups!

    @sugarsammy7209@sugarsammy72093 ай бұрын

    • Thank you for the praise and feedback, I'm glad you like it!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Really like your lathe and milling skills. While many would just go to Harbor Freight or Home Depot for replacement parts, you made your own. It's now better then new. Well done Sir 👏

    @user-gp2px8kr5d@user-gp2px8kr5d2 ай бұрын

    • Thanks! 🐢

      @ForgottenShineRestoration@ForgottenShineRestorationАй бұрын

  • 0:57 wait is that a blue turtle?! Why don’t they get any screen time like red? 😢

    @TheVanillaWolf@TheVanillaWolf3 ай бұрын

    • Maybe the time for the blue turtle will come... 🐢❤

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Good evening Indonesian time, keep up the enthusiasm to continue your work..

    @Zaki-kz8hn@Zaki-kz8hn3 ай бұрын

  • Great restoration 😍😍

    @MASI_forging@MASI_forging3 ай бұрын

    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • All your videos are amazing. The transitions have become so good and smooth. You make a tremendous and beautiful work. It is art. Love what you do. Keep going 👍

    @germaniereva2466@germaniereva24663 ай бұрын

    • Thank you so much for your great comment! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • Klasse gemacht. 👍👍👍

    @naebeltistgallant776@naebeltistgallant7763 ай бұрын

    • Danke für das Lob!🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • YESSSSS I LOVE WATCHING YOUR VIDEOS!!! AMAZING WORK :)

    @Neo_Chord@Neo_Chord3 ай бұрын

    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Beautiful job!

    @TapscottJ@TapscottJ3 ай бұрын

    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • WoW very nice linda video ❤❤❤

    @hotfacts786@hotfacts7863 ай бұрын

  • Es ist so entspannend deine Videos anzuschauen! Saubere Arbeit wie immer und Turtel hat auch Spaß daran zuzuschauen 😅🐢...spiegelt sich gerne, nicht wahr? 😂😂😂 Wirklich ein tolles Hackmesser hast Du da hervorgezaubert 🎉. Ciao

    @jlindskog5141@jlindskog51413 ай бұрын

    • Vielen Dank! Schön immer wieder von dir zu lesen! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • I, no joke have a larger cleaver than that. Grabbed it from an antique place about 10 years ago. All I can read is west Germany.

    @mikeb2374@mikeb237419 күн бұрын

  • Блестящая работа, бро! 👌👍👏👏👏 Кстати, нужно было ещё гоблинов порубить этим тесаком! 😂😂😂

    @user-brobdingneg@user-brobdingneg3 ай бұрын

  • What up these videos are amazing and I’m stopping cringe people from saying anything

    @xavierprice5274@xavierprice52743 ай бұрын

    • Thank you! 🐢👑

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • nice job

    @carrestore@carrestore3 ай бұрын

  • Good job on this giant knife😉

    @lucblin1435@lucblin14353 ай бұрын

    • Thank you very much! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • çok güzel bir video ve artık kaplumbağa yalnız değil (0:55) onun bir kız arkadaşı var

    @FAITH_1967@FAITH_19673 ай бұрын

    • Çok teşekkür ederim, beğendiğinize sevindim! 🐢❤🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • That watermelon cut was very satisfying. Another awesome vid, dude. Keep it up =]

    @sssnakeeater124@sssnakeeater1243 ай бұрын

    • I wouldn't have thought that so much would be broken with this cut 😅🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Very good! I'm from Americana SP Brasil.

    @user-if6tx3iy1p@user-if6tx3iy1p3 ай бұрын

    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Do you remember me?

    @MahadHamad2710@MahadHamad27102 ай бұрын

  • Talk about a full tang. 😅

    @same1eka@same1eka2 ай бұрын

  • Yikes! Is that a cleaver, or a polearm?

    @Mujaki@Mujaki2 ай бұрын

  • Kompliment 👍👍👍

    @modellbahnagenda@modellbahnagenda3 ай бұрын

    • Danke 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Получилось произведение искусства. Повесить на стенку и творить на него намаз по пять раз в день. А дрова рубить топором.

    @user-ty9ot8eg1r@user-ty9ot8eg1r3 ай бұрын

  • Why are the time stamps elden ring bosses 😂

    @Soulreaper011798@Soulreaper0117983 ай бұрын

  • Red and Blue Turtle together... plotting together

    @Pantallideth@Pantallideth3 ай бұрын

    • 🤣👍🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • 👍🏻🤩👍🏻

    @netashio@netashio3 ай бұрын

  • ❤❤❤❤

    @HoseineneTajikeke-yt5sq@HoseineneTajikeke-yt5sqАй бұрын

  • 17:52 I think you got it

    @seiryukanninja@seiryukanninja2 ай бұрын

  • 0:56 what da turtle doing...

    @alone2478@alone24783 ай бұрын

  • Good job mister beautiful restoration beautifully restored well done

    @vinceianni4026@vinceianni40263 ай бұрын

    • Thanks! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • More like the longest cleaver 😂

    @The_Meme_Fox@The_Meme_Fox3 ай бұрын

  • When are you gonna make a knife out of rust

    @The_Meme_Fox@The_Meme_Fox3 ай бұрын

  • 1:26 MY EARSSSSSSS

    @jayT-T@jayT-T2 ай бұрын

  • 😍

    @yazban41@yazban413 ай бұрын

  • I think the screwdriver didn’t work in the beginning because the groove wasn’t deep enough

    @jomesleveque6834@jomesleveque68343 ай бұрын

    • That's what I thought at first, but the whole screw turned and I couldn't hold it on the other side... 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • Nice hogsplitter.

    @MarrockV@MarrockVАй бұрын

  • This reminds me of a cleaver/knife I saw that was used for butchering whale carcasses. I wonder what this was originally intended for?

    @Deuce_Luminox.@Deuce_Luminox.3 ай бұрын

  • Блин , я аж подпрыгнул на стуле в конце . 😢😢

    @toongoos87@toongoos873 ай бұрын

    • 😱😱❤🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • 17:51 What the ..

    @JYB-mf2st@JYB-mf2st2 ай бұрын

  • 101 like

    @Penguinvr614@Penguinvr6143 ай бұрын

  • Gotta say that turtle guy is pretty creepy.....

    @sarahr.trenchard8287@sarahr.trenchard82872 ай бұрын

    • 😱😱🐢❤

      @ForgottenShineRestoration@ForgottenShineRestorationАй бұрын

  • Bruh that‘s not a cleaver that‘s an instrument for committing war crimes

    @bobbysmith6967@bobbysmith69673 ай бұрын

    • 😱😱🙈🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • In the next episode there will be a cutting board

    @pockwaski@pockwaski3 ай бұрын

    • 🤣🤣 good idea! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • Малость поясничаешь.

    @rosenro585@rosenro5853 ай бұрын

  • Had hoped to get the weight and measurements , but no .

    @stick9648@stick96483 ай бұрын

    • The complete cleaver is 82cm long 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration2 ай бұрын

  • I'm just a curious, why all of you restoration fellows wasting so much liquids, oil... WD40... etc?

    @zlaya771@zlaya771Ай бұрын

  • You do have a big cleaver there how ever a hog splitter is considerably larger.

    @jaysanders7472@jaysanders74723 ай бұрын

  • That thing was built like a brick shit house. If it's that hard to take apart, maybe it doesn't need a complete restoration? (Just the blade?)

    @stan4d1969@stan4d19692 ай бұрын

  • THANKS FOR 0 HATERS

    @cleanrepair-vc1ih@cleanrepair-vc1ih2 ай бұрын

  • You don’t see two handed cleavers very often

    @Quayd_McMahon@Quayd_McMahon3 ай бұрын

  • Плохо это смотреть без озвучки, чем со вуком.😊

    @user-we7gg3jd6n@user-we7gg3jd6n2 ай бұрын

  • Oh no our handle! It's broken.

    @kormitthegod6177@kormitthegod61773 ай бұрын

  • Bro restored this 3 minutes in.

    @jasonvengersammy8392@jasonvengersammy83923 ай бұрын

  • Too sexy!

    @ahmedbelly1926@ahmedbelly19263 ай бұрын

  • I’ve seen bigger cleavers… 🤷🏼‍♂️…. Damn good job, bro.

    @OriginalMomo@OriginalMomo3 ай бұрын

  • You need to pin the brass bolsters. Glue is not good enough to hold them to the blade in real life use. And... making it into a wall hanger defeats the entire purpose of restoration.

    @j.l.emerson592@j.l.emerson5923 ай бұрын

    • Art for art's sake is purpose enough. It's not for you to judge what the "purpose" of restoration is for someone else.

      @ynysafalon@ynysafalon3 ай бұрын

    • Art has nothing to do with propper restoration. Techniques of restoration are well defined all over the world.

      @Janez-@Janez-3 ай бұрын

  • Если есть гриндер, зачем точить напильником ?!?

    @ivanivan8944@ivanivan89443 ай бұрын

  • You forgot to put the initials back at the end of the handle. Everything is nicely restored, but you shouldn't erase the mark a creator put into their work And even if you throw the excuse of "Well, _I_ wouldn't mind if someone else put their mark here if it's restored restored again in the future" that's because you weren't the one who drew up the design of that tool, you weren't the one who cut out the piece of wood to make that handle, you weren't the one who cut, or even worse, forged out that entire blade, and you weren't the one who heat treated it neither. If you wanted to put your mark on it so bad, put it somewhere else. But at the fucking least leave the original initials there And even if those initials weren't from the maker of the tool, although not as scummy, it's still pretty unthoughtful of you to erase history quite literally carved into that cleaver. But if you don't know if this was a manufactured piece or not, the initials are as good as a maker mark

    @sorayaya3080@sorayaya308023 күн бұрын

  • You sanded and milled all the history and character off of that handle. KO is forever gone, no one will think about them again, no one will look at the measuring marks on the handle and wonder what they were used for.

    @MikeVal1369@MikeVal13693 ай бұрын

    • Or gave it a new lease of life to create more history

      @fezington@fezington3 ай бұрын

    • My initials are KO! Sad

      @Kevinsyel@Kevinsyel3 ай бұрын

    • You do realize he kept the handle right... most people would have gotten rid of it and made a new handle but he kept it... stop throwing a fit and enjoy the video

      @amberhendrickson5204@amberhendrickson52043 ай бұрын

    • Good riddance to KO

      @voods@voods2 ай бұрын

    • bro no one cares its a fuckin restoration

      @ghoulishffx@ghoulishffx2 ай бұрын

  • clutz.

    @harrywagner3877@harrywagner38772 ай бұрын

  • Pretty simple work, normal finishing, ugly handle, no laser engraving or anything special. 5/10

    @ramztrl@ramztrl26 күн бұрын

  • That's a solid "NO". Totally ruined. Those handle 'channels' on the edges are indicative of a certain period of time and are now lost.

    @ericfg806@ericfg8063 ай бұрын

    • Then do better yourself. 🤷🏻

      @ynysafalon@ynysafalon3 ай бұрын

    • @@ynysafalon stop defending destructive techniques.

      @Janez-@Janez-3 ай бұрын

  • First thing I do, is ruin the heat treatment immediately by sanding it.

    @davesmith5656@davesmith56563 ай бұрын

  • Great job on biggest cleaver in the world restoration forgotten shine restoration 🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩

    @julienghanadan8311@julienghanadan83113 ай бұрын

    • Thank you! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • 👍👍👍👍👍браво👍

    @alex.ryazan8376@alex.ryazan83763 ай бұрын

    • Благодаря ти! 🐢

      @ForgottenShineRestoration@ForgottenShineRestoration3 ай бұрын

  • О да.... Каким нужно быть гением чтоб пытаться выкрутить заклёпки 😂😂😂

    @denisq937@denisq9373 ай бұрын
KZhead