KZhead
Автокөліктер мен көлік құралдары

Chemical dipping a 1967 Ford Mustang Fastback!

minute_of_dangle
2024 ж. 13 Мам.
803 454 Рет қаралды
Жүктеу

We have another mustang in the shop, but this time it’s a 1967 Fastback. I’m going to show you how we remove all of the paint and rust to get this classic down to bare metal prior to its restoration. This greatly Helps extend the life of these awesome classics.
#mustang #ford #fastback #restoration #classic #cars #fast #musclecars #paintremoval #rustremoval #paint #rust #clean #pressurewashing #powerwashing #satisfying #transformation

Пікірлер

  • Those brass welded spots are factory and were done by Ford to hold the panels in place when the car was being built in 1967. Those quarter panels on that car were never replaced and every vintage Mustang has a little brazing like that especially around the tail light panel area.

    @inspectadrift8478@inspectadrift84789 ай бұрын

  • In my opinion this is the only way to begin a serious restoration. The result is a piece that is rust free and all its sins and faults are exposed so they can be addressed correctly.

    @gordonhancock6030@gordonhancock603011 ай бұрын

    • I agree! Most of our customers get their cars Ecoated after this and that just ensures they last forever

      @minute_of_dangle@minute_of_dangle11 ай бұрын

    • @@minute_of_dangle So, I was wondering what your customer do to prevent oxidation immediately after this process? Not familiar with ECoating.... But, seems you would not have a lot of time to protect it. Thanks in advance for your response.

      @sea_turtle_adventures@sea_turtle_adventures11 ай бұрын

    • @@sea_turtle_adventures the last dip Inhibits rust even after the rinse. It takes days for it to flash up. But we dip the car in a rust inhibitor after everything’s said and done. It lasts up to 30 days

      @minute_of_dangle@minute_of_dangle11 ай бұрын

    • @@minute_of_dangle Thank you! Much appreciated. Fascinating to watch the process.

      @sea_turtle_adventures@sea_turtle_adventures11 ай бұрын

    • Having done restoration work for decades, there’s one constant, lots of sins

      @11THEFEZMAN11@11THEFEZMAN1111 ай бұрын

  • I like the work you been doing so far . Thank you for sharing your experience and work on projects and paint stripping projects. :)😊

    @richardjimenez7394@richardjimenez739411 ай бұрын

  • That was so cool !!! Thanks for sharing these videos. Loved the walk around to see the customer has to work with afterwards. 😉

    @TheJoefussGarage@TheJoefussGarage10 ай бұрын

  • Great to see some underside shots of the chassis. Keep 'em coming, these are more fun than you can imagine!!! Sub from Michigan where we KNOW rust!!

    @The78vikings@The78vikings11 ай бұрын

    • I got a shorter pressure washer wand just to get better videos of the undercarriage. I’m glad you enjoyed it! I appreciate the sub!

      @minute_of_dangle@minute_of_dangle11 ай бұрын

    • Сколько на это? Ржавое корыто было потрачено воды ролик дерьмо. Могли бы и не показывать 😢😢

      @user-dt3sf2lq4j@user-dt3sf2lq4j10 ай бұрын

    • Que metió. Ácido. Para. Sacar. La vpintura

      @EduardoEduardoAlbertoMunoz@EduardoEduardoAlbertoMunoz9 ай бұрын

  • very nice job guys! respect!

    @emigrant4life@emigrant4life9 ай бұрын

  • No worries, dont worry about us... the faithful will be here. Shes got a lot that needs to be fixed, but there is LOTS of potential. Thank you for another awesome video, keep up the amazing work.🙏💜

    @mayhemsmaster5050@mayhemsmaster505011 ай бұрын

    • ❤❤❤ thank you that means a lot

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • I've been considering different options on my 1929 model A tudor and started to watch your videos to learn, needless to say I'm definitely going this route, yes it's more expensive initially but in the long run I'm sure I will make that back in savings on time and going over hidden repairs, now just to find someone in South Australia lol

    @chrismcgowan3520@chrismcgowan352011 ай бұрын

    • shame ford does not do this method for rust proofing their vehicles would make them much more robust

      @raven4k998@raven4k99811 ай бұрын

    • Diy mate

      @bustr4063@bustr40639 ай бұрын

    • Have you checked Snowtown?

      @hoilst265@hoilst2659 ай бұрын

  • Great way to start a full restoration with a clean pallette. I worked in local full service shop and I ran the radiator shop when I was there along with regular repair work. We had a hot tank where I soaked the radiator for an hour or so it removed all the paint and all of the corrosion the solder work was much easier this way. Dirty work but satisfying

    @michaelvarble4392@michaelvarble439210 ай бұрын

  • I watch these every morning. That takes care of most of my OCD for the day :)

    @samohtw1@samohtw110 ай бұрын

  • Very beautiful work you did on this mustang you cleaned it very professional

    @edwinheredia4305@edwinheredia430510 ай бұрын

  • Cutting Corners to save a Penny, was, and still is a Cornerstone of every Businessman ever born

    @pjimmbojimmbo1990@pjimmbojimmbo19909 ай бұрын

  • Amazing work, amazing results! New sub and eager to see more of your First Rate Work!! Take care, be safe. RL Buffalo, NY

    @rlewis1946@rlewis194611 ай бұрын

  • Amazing 👏 😊

    @johnjwedrall4290@johnjwedrall42909 ай бұрын

  • Incredible video! learned plenty so cool

    @Adam-wr7uc@Adam-wr7uc9 ай бұрын

    • Thank you! I’m glad to hear that

      @minute_of_dangle@minute_of_dangle9 ай бұрын

  • Great job. If it is possible, I would like you to show the state after the restoration of the base treatment here.

    @fwhd1966@fwhd196611 ай бұрын

  • We need more long-form content like this!

    @DailyFactsCar@DailyFactsCar10 ай бұрын

  • Very nice video. Very informative. Appreciate your time doing these.

    @glennk1931@glennk193111 ай бұрын

    • I appreciate you taking the time to watch it. Thank you!

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • I've been driving my 67 fb for 38 years daily. It doesn't matter, just fix it better and save it. Looks good.

    @randalltravis29@randalltravis298 ай бұрын

  • Thank you for the videos it's fun to watch

    @michaelvarble4392@michaelvarble439210 ай бұрын

  • How do you keep the steel from flash rusting? Any time I've ever cleaned metal that bare it rusts within minutes of being cleaned up, especially if pressure washed clean.

    @BuzntFrog@BuzntFrog9 ай бұрын

  • How do you keep it from flash rusting after?

    @ckmoore101@ckmoore1019 ай бұрын

  • I don’t imagine this process is cheap, but the results are worth every cent IM CERTAIN!!!

    @theloudamerican2193@theloudamerican21939 ай бұрын

  • great work pal

    @Katosnakes@Katosnakes9 ай бұрын

    • Thank you!

      @minute_of_dangle@minute_of_dangle9 ай бұрын

  • Great video.

    @brentking-gmailking2570@brentking-gmailking257011 ай бұрын

  • I’ve never seen this done before really cool thanks for posting this

    @s550mustang5@s550mustang511 ай бұрын

    • Thanks for watching. I’m glad you enjoyed it

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • I liked when you showed the underside of the car being cleaned off, I believe it's a first time 👍.

    @boblalonde5164@boblalonde516411 ай бұрын

    • Glad you liked it! I’ll keep doing it if that’s what people like to see!

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • Good work ❤looking forward to more video

    @davidbarnsley8486@davidbarnsley848611 ай бұрын

    • Thank you! I’m glad you enjoyed it

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • How do you or are you able to coat the metals of interior channels after this?

    @sloppydoggy9257@sloppydoggy92579 ай бұрын

  • Truly an amazing video. I learned a lot. You are a master of the trade.

    @Taras-Nabad@Taras-Nabad11 ай бұрын

    • Thank you! That really means a lot. I appreciate you watching

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • Another great video ... Always look forward to seeing them 😊 see you on the next 👍👍

    @jeffd3660@jeffd366011 ай бұрын

    • Thank you! I really appreciate that. Ill keep them coming! See you at the next one!

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • The brazing on your car was probably done at Ford as this was how they did it in the day. The best way you can tell if a panel has been replaced is if the factory spot welds are still intact. Most shops do not have the ability to do this.

    @user-zx4hv6ip8e@user-zx4hv6ip8e9 ай бұрын

  • Amazing work and super! For some reason it reminded me of the breaking bad movie :D lol

    @abdolreza82@abdolreza829 ай бұрын

  • How do you clean the inner cowl? And how can you get paint in there?

    @zztopjhonsson2484@zztopjhonsson24849 ай бұрын

  • Your posts are very relaxing.

    @onlyweknow2@onlyweknow211 ай бұрын

  • It's in great shape

    @Samsgarden@Samsgarden9 ай бұрын

  • Good work 👏🏻

    @gdfggggg@gdfggggg11 ай бұрын

  • Lol that roger rabbit figurine had me laughing.😂

    @whosaidthat5236@whosaidthat52369 ай бұрын

  • How much does this process typically cost?

    @c.m.7037@c.m.70379 ай бұрын

  • I love your videos. You uncover all of the past metalworking sins by prior owners. As the saying goes: good work not cheap, cheap work not good.

    @mini2nut67@mini2nut6710 ай бұрын

  • How does the rust not come back through the finished paint on the seams.

    @wyattwade7140@wyattwade71409 ай бұрын

  • Great video ..

    @nevadawest411@nevadawest41110 ай бұрын

  • Great and informative video. In general can you give us an aproximate cost for a car like this? Thank you!!

    @sipzter@sipzter9 ай бұрын

  • What kind of reclamation or filtration system is on your drains?

    @thereefaholic@thereefaholic9 ай бұрын

  • How do you dry out all the enclosed cavities? I know it is dipped in rust inhibitor but I am guessing that can't protect forever against trapped or pooled water in cavities? Or does the coating it gets later on displace any trapped water?

    @TheRZBM@TheRZBM11 ай бұрын

  • I wish your shop was near me.. I've got a really rough '74 camaro that I'd love to dip so I can do it right

    @grey1wa@grey1wa9 ай бұрын

  • Pretty cool!

    @MainlakeFishguides@MainlakeFishguides11 ай бұрын

  • I had a two-year old ‘67 Mustang in high school (yeh, I’m old), and the car had rust within a year. Florida car, not a northern car. Shiny paint and rust bubbles at all chrome attachment points.

    @MrHiBeta@MrHiBeta9 ай бұрын

  • Back to a clean blank canvas to wrk with brilliant way to do it

    @derryjones1029@derryjones10299 ай бұрын

  • Body's in fantastic shape for a car that old! Unicorn.

    @robharper2078@robharper20784 ай бұрын

  • So the quarter panels were replaced, and then those rusted through and were patched?

    @oldrustycars@oldrustycars9 ай бұрын

  • you did a fine job on that mustang getting all that old layers of body work off. It looked to me to have been early 1980's spot welding/tig/mig work.

    @siliconvalleyengineer5875@siliconvalleyengineer58756 ай бұрын

  • About on average how much does a process like this cost i find what you do very interesting

    @jamesgilliam6615@jamesgilliam66159 ай бұрын

  • landscape yeahh!

    @joaquinsalvia@joaquinsalvia8 ай бұрын

  • The brazing on the panel joints is original. Cheap repairs were done 30+ years ago, when these cars where nothing else than cheap beaters. The crazy price increases that warrant extensive & expensive repairs is a relatively recent phenomenon.

    @michaelbruns473@michaelbruns47311 ай бұрын

  • Is there a certain “work time” you have after it comes out of the bath to pressure wash all of the paint off? For example, if you don’t get the paint off within 2 hrs it has to go back in the bath?

    @spatulaman2753@spatulaman275311 ай бұрын

  • How do you keep the EPA of your back?

    @maplemanz@maplemanz9 ай бұрын

  • It just doesn't feel right without a hand giving the thumbs up.

    @mitch3384@mitch33849 ай бұрын

  • This is a silly question but after the acid bath and alkaline dip, when you wash the bare metal with water, does that exposure to the water put it at potential risk for rust again, or the exposure is so short its negligible? (Sorry I'm just paranoid about rust)

    @aj_art8058@aj_art805810 ай бұрын

  • Отличная работа, Вы большой молодец.

    @markcrew6179@markcrew61798 ай бұрын

  • Оч крутая задумка , респект !🤙👍

    @SektoR-18@SektoR-189 ай бұрын

  • That mustang is like grandpa's axe! Lol. I was going to say how good it was, until you did the close-ups! 😂

    @onedayiwillmakesomecontent@onedayiwillmakesomecontent11 ай бұрын

    • Hahahah from afar it does look amazing.

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • What keeps it from flash rusting after you rinse?

    @atm1513@atm151310 ай бұрын

  • Nice job

    @kimber1958@kimber195811 ай бұрын

  • Are there ever concerns of trapped air not allowing the bath to contact all of the surfaces? Inside the car, roof top, for example. Or perhaps inside some of the frame? Just curious. This is a very cool process and one I hope to have done some day for my car. What a great starting point for a rebuild.

    @rustyshackleford6092@rustyshackleford609211 ай бұрын

    • Maybe that’s why the car is put in in an angle

      @PinkPanther1402@PinkPanther14029 ай бұрын

    • @@PinkPanther1402 Good point. I'd imagine most of the air could escape in that way.

      @rustyshackleford6092@rustyshackleford60929 ай бұрын

    • I think I remember hearing a small hole is drilled in the roof before dipping I don't know if that has to do with anything you're talking about. But maybe my infos bad

      @worrier@worrier6 ай бұрын

  • What your karcher model, sir?

    @HuyThanhLe112@HuyThanhLe1129 ай бұрын

  • I like how you have roger rabbit and joker figures, curious what type of acid is it dipped in?

    @conceptdesigns4100@conceptdesigns41009 ай бұрын

  • Welcome back

    @chrisplace3024@chrisplace302411 ай бұрын

  • Great body condition

    @Ai-si8vq@Ai-si8vq9 ай бұрын

  • Hi MoD. If I can give an advice on high pressure washer: avoid Karcher. there are now pure shiet, even on their professional "grey line" (I don't even talk about the plastic yellow crap you can find at homedepot etc etc). If you want something that last, I highly suggest Kränzle, another German brand, but being in a serious other level in terms of quality.

    @philipejeuceoututkache@philipejeuceoututkache11 ай бұрын

    • A good Italian pump makes for a great unit

      @davestark2015@davestark20157 ай бұрын

  • 2:29 "car-cher" lol

    @szeddezs@szeddezs9 ай бұрын

  • Would love to see a full restore from acid bath to final ❤

    @muttBunch@muttBunch11 ай бұрын

  • Question- after the final acid bath and rinse off, how is the body treated to prevent rust where there is no access to spray primer on it? The factory dips the bodies in primer. What do folks do in this situation where they have the body dipped in acid? Enjoy your content!

    @warbirdwf@warbirdwf11 ай бұрын

    • We dip it in a rust inhibitor then 75% of our customers have the whole body primer dipped or Ecoated after the process. Graber enterprises in elkhart Indiana has Ecoated some cars after we dipped them. They said our cars are the cleanest he’s ever seen. The owners names Doug and he told me to give his number out if anyone had any questions about ecoating after dipping. Give him a call (574) 202-4636

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • Question ? do you also have a tank for dipping it in some kind of anti rusting chemicals like Zink chromate or other rust proofing coatings. Better to do it now if possible.

    @hydroy1@hydroy111 ай бұрын

  • Very cool process to watch! Where are you located?

    @weekendgarage3299@weekendgarage329911 ай бұрын

  • Location?

    @danzdan7116@danzdan71169 ай бұрын

  • what does a process like this cost to get done ?

    @mikeande1509@mikeande150910 ай бұрын

  • That had to have been another DuPont IMRON POLYURETHANE ENAMEL paint job on that thing...

    @Imnotyourdoormat@Imnotyourdoormat11 ай бұрын

  • A lot of chemistry, big problems to recycle them. Take the price of this scrap vehicle and opposite acid bath, derusting, welding, colors and working and so on. Is it worthwhile?

    @charly-s@charly-s9 ай бұрын

  • How do you stop flash rusting??

    @agorpb5871@agorpb587111 ай бұрын

  • What chemicals are you using for neutralizing and striping.

    @badbug911@badbug91110 ай бұрын

  • The acid bath means business. What % is the acid bath? Don’t feel like you have to apologize for not getting vids out. Life happens. Really enjoy

    @bruceyoung1343@bruceyoung134311 ай бұрын

  • Where are the black balls? I'm surprised you guys aren't using them. Keeps evap low and prevents splashing

    @lilkittygirl@lilkittygirl9 ай бұрын

  • Excelente.

    @gabrielkwiatkowski645@gabrielkwiatkowski64511 ай бұрын

  • Классный форд 👍

    @DenchikS44@DenchikS449 ай бұрын

  • Bang On Boy's❤😊

    @gerrywood3584@gerrywood35848 ай бұрын

  • body man went ape **** with the Bondo 👀👀😁

    @there_is_nothing_here@there_is_nothing_here11 ай бұрын

  • Know anyone who does this service in mid FL?

    @41dhos@41dhos9 ай бұрын

  • Did they put a new front clip on that thing and THEN decide to have it stripped?

    @johnkelly6942@johnkelly694211 ай бұрын

  • This is what I'd like to have done with my 94 GT. it's been painted over the original color and has had body damaged repaired in the past by previous owners / sellers. It's always a question of when! lol!

    @michaelfoster1453@michaelfoster145311 ай бұрын

  • I wonder what cost us to body swap a 1972 Tbird. I am good mechanically but a big forklift, for example, needed in lieu of hoists.

    @grandcrappy@grandcrappy11 ай бұрын

  • Where are you located? I have a project coming up and the last place around my are the use to do this shut down a while back.

    @deadmanracing7392@deadmanracing739210 ай бұрын

  • Great video, I definitely think the chemical dipping is the way to go if possible. .

    @anthonysantiago1999@anthonysantiago199911 ай бұрын

    • Thank you I’m glad you enjoyed it

      @minute_of_dangle@minute_of_dangle11 ай бұрын

  • Could you say what chemical is used in this tank? Is it heated?. Thanks

    @victormagno1520@victormagno152011 ай бұрын

  • Of all the American brands which do you find typically has more rust and rot?

    @michelmendoza1769@michelmendoza17694 ай бұрын

  • Weird how you always mistakenly miss the second alkaline dip, every single time.. and seeing the second alkaline dip pressure washed is the MOST satisfying to watch.. because we get to see the remaining stuck bits, get blasted off. That sucks 😢😢

    @IntegraDIY@IntegraDIY11 ай бұрын

  • I need to do this to my old car dolly, how can I contact you??

    @azarellediaz4892@azarellediaz48929 ай бұрын

  • With all the fake 'restoration' videos on youtube, this is so nice to watch. What's the black rubberized coating in the engine bay?

    @youtubeaccount9058@youtubeaccount90589 ай бұрын

  • Looks 👍 good, can you dip chrome bumpers??

    @gregwelch2459@gregwelch245911 ай бұрын

    • We can but it won’t remove the chrome.

      @minute_of_dangle@minute_of_dangle11 ай бұрын

    • Ok thank you 👍

      @gregwelch2459@gregwelch245911 ай бұрын

  • Always heard horror stories about acid dripping out from cracks/crevices later and ruining the paint/primer. Does this not happen?

    @ZombiePanda1776@ZombiePanda17769 ай бұрын
KZhead