WINNER: How 100 Slices of Plywood Won Me the Battle
Disclaimer: Mister Patina and I are friends...! :-)
In this "Restoration Battle" Mister Patina and Me are challenging each other by restoring the same Metal Shear! Hit the like, comment, and share...BOTH VIDEOS! 🙂
Make sure to watch, like and comment Mister Patinas Video: • Worn Metal Shear Resto...
Please vote for a winner: forms.gle/UCY6HNmnjwqoRHYH6
Make sure to subscribe to Mister Patina: / @misterpatina
And...please stay respectful and friendly😉
My Pages
Patreon: / notterriblerestorations
Instagram: / ntrprojects
Facebook: / ntrprojects
Once upon a time I was invited by Mr. Patina to grab a cold one, and as a friend I of course brought a gift. I came by with two mostly identical metal shears in pretty bad condition. So obviously I asked him to do a competition, an offer he couldn’t refuse?
So I took this metal shear apart, cleaned off the dirt from the past 300 years and gave it a good clean. Some of the old grease just came off by scraping. After that I put every part in my sandblasting cabinet and did a lot of metal works afterwards: filing, shaping, sanding, and so on. When the metal work was done, I powder coated the main part in a mix of “antique hammer effects silver” and "RAL 5012 Lichtblau".
The blades were reshaped with a belt grinder, while sanding, I cooled down the blades in water to keep the hardness.
I zinc plated every screw after truning the heads and cutting the thread.
Parts that are moving against each other where cold blued. I also took care of the Mubea Brand Logo and recreated the sticker, which is providing information on cutting limits.
The final test shows, that this shear works perfectly again. I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible! If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-) Thanks for watching!
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via Paypal: paypal.me/NTRBeer Patreon: / notterriblere. . and follow me on Instagram and Facebook / ntrprojects / ntrprojects
Here are the links to the tools and equipment I use:
IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
Powder Coating Gun: ➡️amzn.to/3XEnXhk
Laser Engraver https: ➡️amzn.to/3EhzLza
Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh
Sandblasting Cabinet 420 Liter: ➡️amzn.to/3S62o89
350 Liter ➡️amzn.to/3IyPj3V
220 Liter ➡️ amzn.to/3IzYMYE
Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
Stay healthy Dr Beer
Music: Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
Result Scene:
Timeless - Lauren Duski from KZhead audio library
Your Lullaby - Per-Olov Kindgren & The Gaugolon Orchestra
with friendly permission by: Per-Olov Kindgren kzhead.info/tools/DDq.html... Jimmy Quango kzhead.info/tools/DTh.html... and The Gaugolon Orchestra / gaugolon .
00:00 - Intro
00:50 - Chapter 1: Mubea Disassembly
04:03 - Chapter 2: Powder Coating
07:43 - Chapter 3: Zinc Plating
11:23 - Chapter 4: Cold Bluing
12:43 - Chapter 5: Sharpening
14:15 - Chapter 6: The Logo
15:28 - Chapter 7: Mounting Plates
19:50 - Chapter 8: The Handle
20:27 - Chapter 9: Timeout/ Beer Tasting
21:29 - Chapter 10: Mubea Assembly
26:21 - Chapter 11: Testing
what did you restore??? you just clean and paint
Would sure love to see your cleaning of a tool look that good 😁
@@ziggy2652 tools are for work , not decoration
@nik xohs true but the tool was not working properly before he "cleaned it"
@@ziggy2652 yes clean it
😊 😊😊
The real winner is the viewer.
There are no winners among people who watch youtube all the time
Exactly! Mister Patina and Dr. Beer has awesome skills and beautiful videos so we viewers are blessed with their work. And true winners!
Both were very impressive video to watch. I agree.
Well stated!!!
Deep, profound and accurate 👌
sweet!
Thank you. that was really a lot of fun and your result is of exceptional quality. I think its so awesome how different both turned out
@@NTRprojects I'm glad you both agree. Wt's whhat makes your two channels special to me is how you both propose quality craftsmanship, respect for the piece you are restoring,, a friendly environment and your two distinct ways though do show through every time. That was why I had suggested ending you both an identical item to restore. You could use your creativity and preferred future uses to show two different, yet equally worthwhile results. So many channels are plain in that respect. Your channels aren't devoid of personality in the background, without you harassing your viewers with 3 quarters of the video about your digestive system or your nail polish.
Mister P! You let yourself down and you let me down. You need to go away and have a long hard think! I mean, leaving the horrible letters on the cheap new bolts! Shame! However Dr. B, whilst it blew Mr P. out of the water, that pinstriping was shockingly shoddy. Conclusion: Room for improvement but Dr B slam dunks it. Rematch. Best of three! 🧡
I mean im all for constructive criticism, but thats a bit harsh doncha think?
@@Watchin_the_world_burn Just teasing the guys 😁🧡
I watched Mr Patina's first and thought "no way will Dr Beer beat that". Was I wrong! Yours was on another level 🏆
I love that you two are having this friendly competition. Excellent job, I love the 'herringbone' effect of the wooden pieces. I've watched both videos, so I'm off to vote now.
This is a really hard choice. Both of you are true masters with a lot of love for detail and a great craftsmanship. Thank you for your videos.
Liked the Bob Ross reference with the, ' happy little accident', line. That base is phenomenal. Seen from the right angle it has a 3-D look, like a huge stairway. Greatly pronounced during the oiling. Very well done.
This has to be the best restoration you've ever done on this channel! This shear was revived from the dead! The mounting table had your own style in design. It gives the finished project its own individuality. This was outstanding!
Well done, without words, for such precise work and craftsmanship, the great German quality, one can only bow down, respect from old BG.
Absolutely gorgeous. That woodworking especially. The handle was the perfect, finishing touch. And the machine will work for decades more now.
Love the way you restored that old wooden shipping crate! It look better than it was originally! Two restoration projects, one for the cutter, and one for the shipping crate!!
I love the look and especially the base you made. You took the time to make it versatile and UN-complicated. Your work is very good and I enjoyed the video. What you did made it go over the top compared to Mr. Patina. Although Mr. Patina made it simple yet elegant in doing. Loved both. For showmanship, you win. For being competitive and simple, he does. thanks to you both.
Beautiful - absolutely perfect.
I totally agree the viewers won here. You both put your own twist on the details. Well done.
It’s all fantastic but that wood looks amazing. Off to watch Mr P now.
Great base design too.
I really like the use of the restored circular saw
😊 very nice, love the addition of the wood grip, so much more comfortable for the user. Bonus points for the wood joining. Loved both videos, but I vote for you on the win. 👍
Yeah, you won for sure. The woodwork is beautiful. But even without that you still won. You're both really good at this, but I think you wanted it more.
The way you constructed the base was unbelievable. WOW!!!!! It had such a dimensional appearance. Again, all I can say is....WOW!!!!
You both have done excellent work. Your genius move in repurposing old packing crates into that stunning wooden base wins my vote. 😍
Excellent work!! I'm a big fan of the cold blueing- that tipped my vote to your side on the battle :) The yellow pinstripe paint needed to be a bit thicker for a better coating but I appreciated the style! Double points for repurposing the ply for the handle and secondary base, very resourceful! MORE BATTLES!
Wow!! That wooden base is so trippy!! Lovely stuff as usual
The work here is beyond gorgeous. You did everything required for a great showdown, plus you included a delicious beer review! Next up, you guys should get together and do a collaboration on a single BIG project together! I salute you, Dr. Beer!
Congratulations, you won the battle
The zinc plating of the hardware was sublime and mesmerizing. Nice work. I choose your work because of your skill and editing skill.
Dr B., this was fun to watch and that you were in 'competition with Mr P made it even more so. Nicely restored and very well filmed. Thanks for sharing.
i watched both the two videos, and for me you are the winner.
Of course it would turn out great. But sorry the part that I really loved from this video is actually the wood base 😂😂 Great work nonetheless! How long did it take you two to complete the project? I bet the sanding alone is really time consuming 😂 Heading to watch Mister Patina now!
Hej Anisa. I think it took us both around 3 weeks. I hope you are getting better soon and everything will come together again
So close. But I like the wood work you did. One vote for you!
I believe you just took the honours, sir! Lovely job.
Now thats what I call a restoration. Wonderful job.
This project / competition deserves more than one beer!
Stunning restoration. Brilliant editing! Stop motion animation is always appreciated. Cool addition with the wood reclamation. 😃👍🏼
You both did a great job but, there can only be one winner and, I think it is you
You nailed it. Great job!
You've outdone yourself! Beautiful restoration!
You win...that wood handle is beautiful...nice work dude
Great work! The basis is excellent work. You can see that it has been a considerable amount of work. Now, time to watch the Mister Patina's video.
This is the winner 100% ! .... Superb attention to detail with outstanding touches added.
Watched both. You win as far as I'm concerned! Nice job.
Отличная реставрация! Привет из Беларуси! 🇧🇾
Since it's a contest and we are the judges, I have created categories by which each restoration is to be judged. The categories are Disassembly, Cleaning and Rust Removal, Hardware and Casting Improvement, Paint Preparation, Painting, Originality, Re-assembly, and Operation. Each category has a scale of 1-5 (1 is lowest score, 5 is highest score) for a possible total of 40 points. Disassembly - 5 Cleaning and Rust Removal - 5 Hardware and Casting Improvement - 5 Paint Preparation - 5 Painting - 3 (The pin striping was thin and uneven) Originality - 5 (does not include the new mounting base) Re-assembly - 5 Operation - 5 TOTAL = 38 Your restoration turned out beautifully! You went above and beyond by paying careful attention to the details. I feel that the paint you chose to use was as close to the original as possible. Very nicely done.
Haha what a nice idea of you. You yourself went above and beyond with this Feedback. Much appreciated how much thought you put into this
@@NTRprojects I sort of patterned the idea the same way you rate the beers that you try. 😁
Tough decision. You both are very good. But that wooden base made my mind! I have enjoyed the battle enormously, anyway. Please do more like this one! Thank you very much.
Mr Patina's restoration was good but you win 🙂 Especially liked the scrapwood mosaic base you made. Beautiful and a little bit of 3d effect too.
Nice work - I can’t imagine you aren’t pleased with the result.
You´re both winners.
Mr. P ran into a buzz saw in this challenge. You took each and every step to the next level. The handle was the best example, the herringbone pattern was centered on the handle, the holes were right down the centerline and the screw slots aligned with the centerline. Masterful work sir, makes me -round to be a patron. Thanks, Ed
Excellent work, a real pleasure to contemplate these restorations. 👏👏👏👏👏👏Greetings from Argentina.
Epic job my brother from across the pond, I wont reveal my vote but the stundent has learned well!!!!
Excellent renovation! 💪
wow, stunningly beautiful and amazingly functional!
Both excellent restorations but this one gets my vote for creativity and the mounting block
Looks perfect. I am going to watch the second competitor's work. Great idea.
Beautiful work.
Both of you did quite well. I agree with others that the true winner is the viewer.
Beautiful restore, as always. It is so soothing watching your videos. The attention to detail, the craftsmanship, the care for the project itself.
Having watched both videos I'm giving my vote to you, Dr. Beer. The shears were similar but not identical. I feel you got the more difficult shear to restore. You both did good restorations of the shears. However you made two mounts, one for mounting on a work table and the wooden mount, which was excellent. You also made a very nice wooden handle. Mr. Patina didn't make mounts or a handle. You did pin striping on the body, which matched the pin striping on the original. Plus, of course, you evaluated a beer.
I liked this. Future restorations need to be on identical pieces so we can provide fair critiques.
Excellent Restoration Bro. Fit for another 50years great job Bro.👌➕
Ihr Wettbewerb mit Mr. Patina verbessert Ihre Videobearbeitungsfähigkeiten!
Enjoyed both restorations. This is the winner for me. More variety in processes. Great work guys.
I have seen both of the videos. Both of you made an excelent work but you decided to raise de bar one level more adding the mounting surface and the enhanced grip with the recycled wood plates. Over all hats off to both of you. You made a great work
Ihre Restaurierungsarbeiten sind in jeglicher Hinsicht außergewöhnlich. Die Videos sind von toller Qualität. Es macht Freude diese Arbeiten online verfolgen zu können
For me you are the winner. The metallic paint and stripe matched the original, the base and handle were an incredible addition to what would be expected as a standard. Superb.
My son and I are huge fan of restoration videos and this event was great. We've voted for you because of your attention to detail and the extra mile you went. Fantastic work !
Clearly the winner....
That is a work of art, no wonder you won. That wooden base looks 3d, amazing effect. Great effort well done sir...😊 👍
Ach, einfach immer wieder schön jemanden zuzusehen, der ne Ahnung von dem hat, was er tut ❤
Now THAT was a beautiful restoration. Well done!
OMG that 'snick' sound while snipping the tin at the end of the video.👌
Thanks so much. I enjoyed both restorations. It’s interesting to see how differently you both approach the same task. Lovely result at the end. The base and handle are quite special and add a finesse to the over all finish.
Entry: 4/6 - tasty on first look but not sensational Aftertaste: 6/6 - enjoyed the iron filings Body: 6/6 - loved the body work and woodworking Colour: 8/6 - perfect pinstripping Bitterness: 4/6 - pleasant sand blasting Acidity: 5/6 - loved the zinc plating and cold blueing Fizz: 8/6 - after so many hours of work on the craftsman part ... it was very refreshing to watch 41/42 .... Rank # 1 / 2 ... Definitely would watch again
What a fizzy and refreshing Feedback. Thanks a lot
This was a great idea! Friend amongst friend having fun doing what they love. This has to be one the toughest decisions I've had to make in a while. Mr. Patina was definitely up to challenge though with his magic tricks (snapping fingers and prep work magically being done!)... But beer... And wood workery was an equally impressive touch! I have voted, but my hat is tipped to the both of you! Well played, fellas! 🥂
That wood base is amazing. Hard to believe that its made from the shipping box.
Now we need the trifecta. Mister Patina, Not Terrible Restorations, and my mechanics
Okay, you ask him 😜
Congratulations. You are the winner. And you got me as a new subscriber. ✌️
Welcome to the channel Tobias and thank you
I like the wooden work was awesome 😊
You win. Both were dope but yours was above and beyond. No bias, i came here as a mister patina fan
I enjoyed watching both restorations.
I enjoyed both videos a lot👍👏👍👏👍👏👍👏👍👏
Both video are excellent, Dear Sirs thank you a lot for your art! Nevertheless in my opinion, Dr Beer's project was more structured and more technologies have been applied. Hope we will have the opportunity to enjoy your new projects.
Magnificent job you did restoring the metal cutting shears to working order. It looks much better and it works like a charm too. Excellent work.
Off to watch Mr Patina's video, but you've set a high bar with your one! One of things I love about these kinds of restorations is the reuse of things in a "disposable" age, and the upcycling of the wood was an excellent example of this.
great work, a wonderful restoration
Mr. Beer wins Congratz. But they both did a very Good Job.
Awesome restoration!. Your videos are also going from strength to strength. And although I haven't watched MrPatina's video yet, I already don't want to have to choose!!! 😁
J'ai attendu la bière pendant 20 minutes 😊, j'ai mangé le pan-bagnat de la base sans boire, heureusement il y avait de la bonne huile d'olive 😂 ! J'ai un peu regretté de ne pas voir le détail de fabrication de l'étiquette 😢 . J'ai terminé le visionnage en me disant "décidément ce gars est un champion de la restauration, on le savait déjà mais il s'améliore toujours" Merci encore et bravo pour ce splendide résultat fonctionnel. Patrick
Oh Patrick, merci beaucoup pour cette histoire et ce feed-back :)
The Doctor wins on finess but Mister Patina better resurrected the spirit of the device.
I watched both restorations....both Mr Patina and yourself did incredible work....but your wood working puts yours over the top. It's an incredible detail to add.
Very enjoyable to watch! And the end product is excellent!
What a competition, both are as good as other, superb sir. What a restoration beauty.
I can't split you boys. I said it before the challenge videos were released. But I've at last had the chance to watch both and I've cast my votes. May the best man win ⚔🛠
Ooh, and I forgot to say that my OCD once again says "Hi and much respect!!" to yours 👌👋xx
Ha, I was about to comment on the gauge of the metal but sure enough you snipped the thicker one at the end - well played! That woodwork is amazing and the restoration is beautiful, thanks for sharing!
Amazing job my friend congratulations 👏👏👏👏🎉👏
you took the crown with the paint job and the selective blueing. plus actually giving the shears a cutting angle was perfect.
I really enjoyed the editing of this video, keep up the good work
Beautifull. Really really beautifull 👍🏻 good job
Magnifique travail , la base en bois collé est une idée géniale . BRAVO .🖕🖕
Hello Mister Patina beautiful restoration beautifully restored well done