KZhead

The process of making marine propellers. A manufacturing factory for marine propellers in Japan.

Process X
2024 ж. 10 Мам.
484 322 Рет қаралды
Жүктеу

The process of making marine propellers. A manufacturing factory for marine propellers in Japan.
👁 Mikawa Propeller Co., Ltd. 三河プロペラ株式会社
☎️ TEL：0533（57）4121
🏠www.mikawapropeller.co.jp/inde...
🚩maps.app.goo.gl/VhxwSsnwaEsm8...
💌 Contact : processx2@gmail.com
📸 Copyright(C) 2022. Processx. all rights reserved.

Пікірлер

  • 取材ありがとうございました。動画内でプロペラを掃除して、サンダーやハンマーでセキと呼ばれる湯道の部分を切り落としていた者です。動画撮影時、新人なので至らない点がたくさんありますが、今現在も優しくて熱い先輩方に手厚い指導を受け日々精進しております。職人業なので難しいところだらけですが、とても面白くて素晴らしい仕事です。私はそこにやりがいを感じております。 この動画を見て興味がお有りの方は是非一度弊社にお越しくださいませ。

    @karkun625@karkun62513 күн бұрын

    • 夏場は大変暑い職場かと想像しますが熱中症には十分に注意してこれからもお仕事頑張ってください。日本の物流を支える素晴らしい仕事で尊敬します。

      @user-jq5iq9dt2j@user-jq5iq9dt2j13 күн бұрын

    • Amazing ! My deepest respect for your work to all of you 👏🏻

      @trollenz@trollenz13 күн бұрын

    • @@user-jq5iq9dt2j ありがとうございます。一刻も早く、先輩方に追いつけるよう頑張ります。

      @karkun625@karkun62512 күн бұрын

    • @@trollenz thank you for the kindness!

      @karkun625@karkun62512 күн бұрын

    • 안녕하세요. 한국에서 어선을 하는 어부입니다. 저에게도 기회를 준다면 제작하고 싶습니다. 연락처좀 알려주세요

      @user-xj6oh2bg9c@user-xj6oh2bg9c7 күн бұрын

  • 素晴らしい.。私は自動車工場で働いていた時、隣に鋳造部門がありました。筋骨隆々の人が滝のように汗を流して働いていました。尊敬します。

    @815y454b@815y454b13 күн бұрын

    • А про автоматизацию вы совсем не знаете? Зачем руками работать когда есть механизмы облегчающие работу или это экономия, люди дешевле?

      @Barrakuda9111@Barrakuda911110 күн бұрын

  • 정말 재미 있어 보입니다 특히 주물로 나온 형상을 good chucking and milling 에 감명받았습니다. 뭐 대충할수도있지만 원점을 잘 절반씩 잡고 가공하는게 인상적이네요 항상 일본제조업은 존경하고있습니다 from 한국에서

    @Sugyeong88@Sugyeong8813 күн бұрын

  • Quy trình chế tạo cánh quạt biển tuyệt vời. Lò nấu kim loại hết sức hiện đại hi 🇯🇵👋

    @MinhNguyen-nl1gm@MinhNguyen-nl1gm13 күн бұрын

  • このお仕事、夏場は地獄でしょうね。 お疲れ様です。

    @tatsuonishi@tatsuonishi13 күн бұрын

  • I love the Japanese care and commitment to quality, you can tell that every move they make is carefully thought out and weighed. Blessings of the most high Yah to the Japanese people.

    @mrMacGoover@mrMacGoover13 күн бұрын

  • Nhà máy sản xuất cánh quạt biển. Hết sức lớn. Người Nhật làm ăn phát triển OK 🇯🇵👍.

    @MinhNguyen-nl1gm@MinhNguyen-nl1gm13 күн бұрын

  • 家に飾ってみたいほど美しいですね

    @user-pj1cf7jo5j@user-pj1cf7jo5j4 күн бұрын

  • Жапония нағыз дамыған мемлекет екен әр заттың өз зауыты бар әр сапасы бар 👍💯

    @Bakhamaster001@Bakhamaster00113 күн бұрын

  • One of the best in yoour series. Fantastic! :-)

    @TERRYBIGGENDEN@TERRYBIGGENDEN13 күн бұрын

  • I wish I was in Japan working at this factory!! Excellent Propellers!!! Aloha from Hawaii!!!

    @kalaipaa@kalaipaa13 күн бұрын

  • Much appreciation for the subtitles

    @tomarmadiyer2698@tomarmadiyer269810 күн бұрын

  • Wunderbar 👍👍👍🍀🍀🤞👋

    @christelklein5070@christelklein507013 күн бұрын

  • Отличная работа! Мастерам успехов и процветания на профессиональном поприще!

    @Vyatskiy_Metis@Vyatskiy_Metis8 күн бұрын

  • Things of beauty!

    @ctid107@ctid10713 күн бұрын

  • It would be interesting to see this propeller in a few years after the churn bubbles have pitted it to see the before after comparison.

    @gloomed8888@gloomed888813 күн бұрын

  • Incredible!💜

    @marciagarcezmanzella7132@marciagarcezmanzella713213 күн бұрын

  • Sangat menakjubkan kawan salam dari Indonesia

    @SawmillWood@SawmillWood13 күн бұрын

  • Really impressive 😲

    @FrankieJensen@FrankieJensen7 күн бұрын

  • magnifique

    @Motardebase.@Motardebase.12 күн бұрын

  • Ived ones seen this on an exhibit here in philippines...i even saw a bigger one than the video...i always thought those propellers were made by complicated cnc's but when i saw this im amazed that it is made by expert craftsmen using traditional means.

    @cetocoquinto4704@cetocoquinto47044 күн бұрын

  • فعلا عمل رائع جدا

    @tayebguermit803@tayebguermit80313 күн бұрын

  • На пакистанское производство похоже :D

    @Romnnu@Romnnu4 күн бұрын

  • Çok güzel.😀

    @darvin3142@darvin314213 күн бұрын

  • Amazing, I wonder how much they sell for considering the huge amount of work that goes into every single one

    @Frankagator@Frankagator13 күн бұрын

    • Mikawa prices are quote only, but similar US-based propellers go for $1k (22") to $9k (50")

      @kanetw_@kanetw_13 күн бұрын

    • @@kanetw_ Cheaper than I thought.

      @alanrogs3990@alanrogs399013 күн бұрын

  • 만들어도 그냥 예술이네

    @user-vw4xs2xp9v@user-vw4xs2xp9v10 күн бұрын

  • *谢谢。❤️*

    @WeiGe-8888@WeiGe-888813 күн бұрын

  • Didn't see it mentioned, but if anyone's curious the metal here is almost certainly aluminum bronze. 90-95% copper, 5-10% aluminum. Very strong and corrosion resistant.

    @urdnal@urdnal10 күн бұрын

  • Good"

    @UDINTROPHYCHANNEL@UDINTROPHYCHANNEL13 күн бұрын

  • For the manufacture of propellers, special bronze is used - naval bronze, naval brass, shipbuilding bronze. And it’s not easy. If you've ever seen shiny gold parts on a ship, like a bell, then you've seen bronze, which is called naval brass because it really looks like brass (but without the zinc in it). In marine bronze, instead of 4% iron, it contains 2% manganese, due to which the anti-corrosion properties are significantly increased, and the alloy acquires a shiny golden appearance.

    @dossantos5890@dossantos58908 күн бұрын

  • How beautyful are those props😍 Wow man!!!!😜🥰

    @michaelripley4528@michaelripley452813 күн бұрын

  • Прикольно, даже плёночка с экрана термометра не снята)

    @user-hk3kf1te9s@user-hk3kf1te9s20 сағат бұрын

  • 凄いですねぇ。 ちょっと気になったのが防塵マスクをされてないようですが、かえって邪魔になったりするんでしょうか🐈

    @sutesuteo6745@sutesuteo674513 күн бұрын

    • やったほうが良いけど、暑くてやってられないというのが実情なんでしょうねー

      @sutannex@sutannex13 күн бұрын

  • Приветствую!!! Респект, отличная работа!!! Изначально винт был трёх-лопостной, не!?)))

    @Shevkett@Shevkett7 күн бұрын

    • Но закончили 3х лопастным). Немного не те видео смонтировали походу. Вообще красавцы

      @JurokGTV@JurokGTV5 күн бұрын

  • That process, minus the CNC machines, is probably hundreds of years old

    @justayoutuber1906@justayoutuber190612 күн бұрын

  • 大勢の方たちの息が一つになるとき、日本のぺらは世界一と言われていることが目えましたね。

    @toshif.7409@toshif.740913 күн бұрын

  • Пакистанцы делают это веселей и бодрей. 😅

    @user-zr7qr7rh4b@user-zr7qr7rh4b12 күн бұрын

  • 出光さんが戦艦大和のプロペラ技術なら大型タンカーを運搬できると 聞いたことがあります。

    @user-ol5zq8xe4p@user-ol5zq8xe4p7 күн бұрын

  • 申し訳ありませんが、通訳を使わせてください。 驚くほど困難な制作過程ですが、素晴らしいことです。そしてもっとすごいのはプロペラの歴史です。チェコ出身の同郷人、ヨゼフ・レスラーが発明したことを誇りに思います。そう、オーストリア＝ハンガリーの時代でしたが、国籍はチェコでした。さらに興味深いのは、チェコがヨーロッパの真ん中に位置していることだ。 これらのビデオに感謝し、あなたの仕事に幸運が訪れることを祈っています。

    @tomashabada5511@tomashabada5511Күн бұрын

  • Начал смотреть, думал ну капец как в пакистане в песок отливают и потом в ручную доделывают. Но нет, токарная обработка, фрезеровка на чпу, все в лучшем виде. Винт стоит наверное как крыло от боинга.

    @user-jq1wz4ik1b@user-jq1wz4ik1b10 күн бұрын

  • Hope that the company provide safety glasses while they sand the masterpiece in the future.

    @kwokmanlam7946@kwokmanlam794613 күн бұрын

    • I hate to say it, but the use of safety gear by older Japanese employees was pretty sketchy when I worked at the US Navy's ship repair facility in Yokosuka, Japan. I even saw guys arc welding without a helmet by closing their eyes just as they struck the arc. It wasn't as though safety gear wasn't required, and in plentiful supply, but a number of employees just didn't want to use it.

      @53kenner@53kenner10 күн бұрын

  • Greetings from Virginia. 仕上げプロセスは純粋に美観を目的としているのでしょうか、それとも細かい研磨とバフがけは汚れや腐食を遅らせる目的でもあるのでしょうか

    @MrSteve280@MrSteve2806 күн бұрын

  • 私の兄は海兵隊員です。

    @70000solar@70000solar10 күн бұрын

  • Технология везде одна. Сколько лет ничего практически не меняется. Мы в институте так же делали. В меньших масштабах, понятно)

    @user-ky9vj1bi1m@user-ky9vj1bi1m12 күн бұрын

  • 👍👍❤❤

    @laghlaaziz4967@laghlaaziz496713 күн бұрын

  • ナカシマプロペラかと思った

    @user-yv9fk5sd5v@user-yv9fk5sd5v13 күн бұрын

    • CPPの製造工程は流石に公開できないでしょう。。。 見てみたいけど

      @boyamber@boyamber13 күн бұрын

  • ☝👍👍

    @moode122all4@moode122all413 күн бұрын

  • How big is the boat this propeller is used on? How big is the engine in the boat?

    @rinardman@rinardman11 күн бұрын

  • There is no raw material called "ingot". It is bronze, of some kind. An ingot is the shape it is delivered in, before it is melted. I thought Japlish had died out.

    @zygmuntthecacaokakistocrat6589@zygmuntthecacaokakistocrat658912 күн бұрын

  • 현직 선장 입니다 , 우리나라는 왜 저렇게 장인정신으로 스크류 만드는 데가 없을까요 ㅠㅠ 주먹다짐 으로 70년대 철공소 스타일로 얼렁뚱땅 만들어 대니 어떤때 만든 스크류는 진동없고 잘나가고 어떤때 만든 스크류는 진동에 배도 안나가고 물도많이차 연기도 많이나오고 ㅠㅠ 돈은 더럽게 비싸게 받고 , 저곳에서 배 스크류 만들어서 오고 싶네요

    @user-ek2hz7zc8w@user-ek2hz7zc8w8 күн бұрын

  • 船舶用のプロペラを造ってるのは、豪華客船、カーフェリーのスクリューを造ってることですね。船のプロペラができたら、造船所に届いて豪華客船とカーフェリーに取り付けて船を動かしてください。

    @user-do9hq2my5g@user-do9hq2my5g5 күн бұрын

  • The music is unnecessary. It's extremely irritating. The constant music ruined the whole video.

    @lswinney1000@lswinney100013 күн бұрын

  • えらい小さいな。どのくらいのサイズの船に使うんだろうか。

    @user-uc5zk3nx2t@user-uc5zk3nx2t12 күн бұрын

  • I thought this was going to be another of those videos with guys wearing filthy pajamas and no PPE - surprise.

    @ianboard544@ianboard54413 күн бұрын

    • This is Japan, not some shithole like India or, even worse, Pakistan.

      @iatsd@iatsd13 күн бұрын

  • プロペラって鋳物やったんやな ずっと鍛造かと思っとったわ

    @user-bf6jp3em6t@user-bf6jp3em6tКүн бұрын

  • 韓国に頼むと1/3の値段で出来上がります

    @user-jb9fi4pn9c@user-jb9fi4pn9c9 күн бұрын

  • i was certain those were forged, not cast... i guess they use a more flexible alloy...

    @tylerufen@tylerufen13 күн бұрын

    • It's a cupro-aluminium alloy. Because of the shape, economically it's impossible to forge a propeller of big size. Furthermore, because of the different requirements (weight, speed, and a lot of other factors), most of the propellers are custom fitted for a particular ship. That means that from a generic thick cast the blades are milled to the required profile and finally polished.

      @pabloricardodetarragon2649@pabloricardodetarragon264913 күн бұрын

    • If you can forge one You will receive Nobel price . You know what means forging?

      @iuliandragomir1@iuliandragomir112 күн бұрын

  • 是鈹銅錠 非鋼錠

    @johnlin7670@johnlin767012 күн бұрын

  • INGOT ITU JENIS LOGAM APA ? APAKAH BESI, ALUMANIUM, KUNINGAN, KANCURAN ATAU SEJENIS APA KANG MIN ?

    @ed-tM@ed-tM13 күн бұрын

    • Looks like aluminium bronze.

      @raulkaap@raulkaap13 күн бұрын

    • bronze alloy for propellers

      @iatsd@iatsd13 күн бұрын

    • @@iatsd 🙏terima kasih 👍👍

      @ed-tM@ed-tM11 күн бұрын

  • infelizmente estou sem trabalhar vocês podem me ajudar a encontrar um lugar pra poder trabalhar pois estou precisando. Muito

    @user-zu1er3is3h@user-zu1er3is3h13 күн бұрын

  • ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

    @future483@future48313 күн бұрын

  • современные "Японские технологии"......

    @alexvs4492@alexvs449211 күн бұрын

  • 彼の名前は「Rasel Jaman」です。バングラデシュ人です。

    @70000solar@70000solar10 күн бұрын

  • How much does one sell for?

    @andyd7728@andyd77288 күн бұрын

  • お値段が知りたいです😮

    @take8o38@take8o388 күн бұрын

  • What is metal alloy of these ingots?

    @Galatians.3.26-29@Galatians.3.26-2913 күн бұрын

    • It's a cupro-aluminium alloy

      @pabloricardodetarragon2649@pabloricardodetarragon264913 күн бұрын

  • 3:13 片手とはい吊荷の下に入るのは怖い

    @user-rn6ml2et8f@user-rn6ml2et8f8 күн бұрын

  • BHP jak choooj xD

    @oskosknextime6883@oskosknextime688313 күн бұрын

  • Лучшая похвала от русских в комментариях - это критика :D

    @vyacheslav9743@vyacheslav974310 күн бұрын

  • 18.05.2024.

    @user-mi9qq9we4o@user-mi9qq9we4o6 күн бұрын

  • Латунь?

    @JurokGTV@JurokGTV5 күн бұрын

  • 昔は鋳型を使った鋳造業が沢山あったが、現代は本当に少く成った。 目的が曖昧で中途半端な高学歴志向の教育と世の中で、こういった技術者の職工や労働者が少くなった。 様々な業界で、人手不足や担い手問題が中小企業にのしかかって、日本の経済を圧迫している。

    @user-vn3yc6ip4n@user-vn3yc6ip4n11 күн бұрын

  • Is the sand from casting reused? The music was not needed.

    @GLAJMAN@GLAJMAN13 күн бұрын

    • Usually. If they keep it clean it can be reused indefinitely.

      @iatsd@iatsd13 күн бұрын

    • @@iatsd That's cool. Thank you for the answer.

      @GLAJMAN@GLAJMAN12 күн бұрын

    • yes, we have the machine just to clean the sand

      @karkun625@karkun62510 күн бұрын

    • @@karkun625 Nice! It would be interesting to see how it works.

      @GLAJMAN@GLAJMAN10 күн бұрын

  • 이 업체명이?

    @channeltimes3548@channeltimes35486 күн бұрын

  • None of those dudes doing the shakeout or grinding at 10:10 are wearing masks... Someone senior at Mikawa needs to do some health and safety training!

    @conradleonard@conradleonard13 күн бұрын

    • 2:37 What do you think of the wooden beam in the lifting beam? I'd be scared that it might fracture.

      @Nepodvignost@Nepodvignost13 күн бұрын

  • 那個老頭早晚會發生工安意外

    @rmp4255230ify@rmp4255230ify9 күн бұрын

  • プロペラの材質、成分配合は？

    @my-so4sb@my-so4sb13 күн бұрын

  • Aka

    @IBRAHIMROTERWOLF@IBRAHIMROTERWOLF13 күн бұрын

  • Unsafe environment, very dusty, face mask is a must

    @romanl.5376@romanl.537613 күн бұрын

  • Some very unsafe working conditions. the mold is suspended by an old piece of wood and is held by some very unstable chains. Those could very easily slip and fall on the person working beneath it. That's what the lack of labor unions gives you. Perhaps ending the US occupation could help, though.

    @zejalt8608@zejalt860813 күн бұрын

    • Does it hurt being that stupid or does it come naturlly for you? There is no one *under* it at ANY point. Feel free to timestamp it if you think otherwise. And the workers there are ALL in unions. The US occupation of the mainland ended in 1958 and ended in Okinawa in 1972.

      @iatsd@iatsd13 күн бұрын

  • 刻印打ち間違えたらどうなるんだろうw

    @am.423@am.42311 күн бұрын

  • без респираторов это говно шоркать... ля, средние века, японки ещё нарожают

    @Invin7lord@Invin7lord13 күн бұрын

  • 防毒防塵マスク位付けようよ。

    @yukihironishida9218@yukihironishida92186 күн бұрын

    • 歳取ったらじん肺確定演出

      @user-xi7xo4iz1t@user-xi7xo4iz1t6 күн бұрын

    • 思った以上に規則緩いんだな。 防塵防毒マスク付けてなくてビックリしたわ

      @user-rk5hp4ly4t@user-rk5hp4ly4t5 күн бұрын

    • 埃吸ってんのと変わらん

      @infini5024@infini50245 күн бұрын

    • 作業内容も知らない素人が言う事でもないけどな

      @user-cu8jh8no7k@user-cu8jh8no7k4 күн бұрын

    • プロがそれで良いとしてるんだから外野はすっこんでろよ。

      @user-sv5wk4li1d@user-sv5wk4li1d4 күн бұрын

  • It looks interesting and shiny as long as you don't dive deep into details. I guess this production is actually cool and precise, but you missed a lot of steps, so it looks kinda random. Like milling only one side on CNC, and another one manually. Or balancing detail by rolling it on a rails and marking with crayon, without cuts. Or mounting almost finished propeller on a rotten stick. Awkward...

    @Lorrey377@Lorrey37712 күн бұрын

  • Жлобы. Даже опилки при упаковке не насыпали.

    @Barrakuda9111@Barrakuda911110 күн бұрын

  • Для браконьерской шхуны подойдёт. Крафтовое производство с технологическими операциям, которые уместны разве что для художественного литья. СИЗы покупают на свои деньги наверное. Аналогия с пакистанцами не случайна для русского зрителя.

    @LtJohnny-7.62@LtJohnny-7.62Күн бұрын

  • Какаято слишком кривая технология производства винтов. За 90 летний опыт

    @xxHaTTaBxx@xxHaTTaBxx9 күн бұрын

  • Why is the mold not on a pallet and being moved under the sand by a pallet jack? Why is this dude wasting HOURS walking back and forth? Is wasting time a part of the Japanese process? Because there are far more efficient ways of hand crafting. I am not even speaking of the automated mfg process.

    @Pseedholm@Pseedholm9 күн бұрын

  • 工業、製造業の基本になる素晴らしい仕事。 製鉄所に勤めた経験ありますが　本当に体力勝負？ 気になる点が、 邪魔になろうが防塵マスクしてほしいです。 顔がススで黒くなるし、鼻の中も黒くなる。 付けている人がいないのも気になってしまいます。

    @norichan0701@norichan07018 күн бұрын
KZhead