I have been using insert tooling for one half of a century, and I must say that I gained an appreciable amount of knowledge from this video. Thank you very much.
@tracylemme13753 жыл бұрын
Y would u say half a century like that
@ilikewaffles36892 жыл бұрын
@@ilikewaffles3689 y wuld u tipe with 1 lehter like that.
@ehss192 Жыл бұрын
@@ehss192 my guy...
@ilikewaffles3689 Жыл бұрын
Very informative. Being new to this field, was looking for something like this. Thanks !
@mohitadlakha9828 жыл бұрын
really good explanations.
@userwl28508 жыл бұрын
I'm newish to the trade, so videos like this help me tremendously. Thank you.
@DeanShredder6 жыл бұрын
very good Video! Im new in machining since 1 Year and I am doing my apprenticeship in the next 3 Years now. Its amazing to have this video. I learned alot to create a better chip action etc. . Thx alot!!
@maxwellmuhlebach59214 жыл бұрын
I absolutely love this video. Very informative. Thank you so much. I'm trying to get back into machining parts and pieces.
@ronmiller6826 жыл бұрын
Brilliant informative video that will have left most of us with an open mouth and a look of utter confusion 😂
@geoffankrett701211 күн бұрын
Excellent description & demonstration ! It is very helpful to students ,technicians ,engineers & manufacturers ! Thanks a lot for your valuable explanations !
@rameshtripathy59785 жыл бұрын
I never used a cutting machine (other than maybe a drill and a saw), but modern machines always fascinate me, and this video did bring some light to design decisions and how it works.
@movax20h Жыл бұрын
It is with great sadness that after 60 + years of active machining I realise that I really know nothing when it comes to turning and milling with today's modern insert tooling...…...but all is not lost, I just invested in a bunch of tool holders and inserts on Bangood and am set to relaunch my career.....in terms of years, 80 is the new 40 so they say.... just gotta get outta my chair more often.
@gangleweed4 жыл бұрын
@Tony Wilson Everything you wrote ignores the fact that it is money that drives the engine of commerce. What is the point of producing goods that you cannot sell because the Chinese are selling the same thing just as good and cheaper. Old skills are as they are.....old and out of date and they will never compete on the playing fields of todays manufacturing or marketing. It's good to know how to sharpen a HSS tool blank but when the factory is heavily into carbide insert technology HSS has no place on the menu......unless you're a hobby worker in a backyard garage scratching a living. I'm a golden oldie, extremely long in the tooth but I detest old fashioned ideas and methods. To solve the problem of supply you must cater for the market or die in the dust......nobody wants or loves a hasbeen especially in high tech manufacture......you have to compete, but more so you have to be a better competitor than your opposition, and you have to be able to exist on a bowl of rice and 2 bucks a day to stay in the race......metaphorically speaking. The end message is do what you do best and don't look at the stars when you are still crawling around on the ground.
@gangleweed4 жыл бұрын
@Tony Wilson Well one thing's for sure, even if I have 60 + years at the coal face, working with 2020 engineering methods still doesn't make me a wunderkind because I can read a drawing or grind a tool.....that is old school and if you want to exist in the modern workplace of today you have to be in the know with current practices.....my experience is basic, learned in the late 50's, but so was Trevethick's when he invented steam engines that pumped water out of deep mine shafts.....that was with beam engines and despite all his know how nobody would employ him today if he was still around. In essence, one must grow with the technology, embracing it as it evolves and improving and promoting it for your personal agenda. I don't think anyone can accumulate all the past knowledge and be a jack of all trades.....I would say that if you evolve in your job description you will soon lose the basic skill ability due to lack of practice and unuse. Who would want to still do CAD designing when you get promoted to seniority and guide the ship instead of working on it. Engineering is one area that is expanding in new ways to make it more profitable for manufacturers, and that means if you can't keep up with the flow you will be sitting in the back row watching it happen. The other side of the coin is profitability, no matter how you get to it the bottom line will always be the deciding factor in manufacturing. The Chinese have hit the button square on the jaw.......but their culture and wage structuring has a lot to do with their prosperity and the West will not match that scenario while they are driven by money for time.
@gangleweed4 жыл бұрын
@Tony Wilson I know your reasoning is well intended but from a realistic standpoint, using the latest CNC is way more repeatable and way more accurate than the old milling methods. Yes it takes an experienced Engineer to figure out the best profiles and methods to machine a part that has the highest quality/strengths etc. But at the end of the day it all comes down to what is NEEDED. We can philosophise about the good old days when we made hand crafted stuff that would/and has lasted a century, but if you're making a base for a frying pan that will be disposed of in 5 years, why worry about it ? I work in the electronics/semiconductor business and I have seen massive strides in automation and the workflow. The modern pick and place machines are incredibly efficient and accurate. Why would I want a factory floor with people hand placing when the economies and accuracies of CNC machines far far outweighs the cost of people ? We have to keep learning and have to accept that our industries change. It's the nature of the beast. Evolve or die, as they say!!
@pentachronic3 жыл бұрын
@Tony Wilson I am over 50 and have designed a massive amount of electronics in my career. I have designed space systems through to consumer electronics and have designed a lot of products. I am a bench development kind of person and have a lot of hands on experience. Don't be so patronising please. The point is that one has to move with the times. If I had the attitude of I must do everything by hand I would not be designing muliti million gate asics and ICs. The tools, compilers, CAD and software along with the manufacturing technologies have changed rapidly in the last 10 years. I have to evolve and keep up with that. If I have to use automation, so be it. It's the same with mechanical engineering. Yes maintenance is an issue, but design in based on solid foundations. You now have 3D printing, metal sintering, SLA and 3D metal fabrication technologies. They bring in new techniques and better efficiencies such as completely enclosed manifolds which could not be machined using older techniques. New alloy fabrications with mixed ceramic technologies, lighter weight pourous materials, carbon fibre 3d printing. The world is changing. Whether you like it or not. There will always be a need to maintain older equipment however there will be a time where that equipment becomes obsolete and is replaced by newer/faster/better/more efficient designs. It's called progress. Mining equipment is changing. New CNC higher accuracy, higher speed techniques are/have been developed to improve efficiencies of mining too. Maybe slower than other industries but it is changing. This is not to say that solid engineering foundations should be ignored, but also, with that said, neither should new approaches using modern techniques be poo-poo'ed either. This is where we meet in the middle and make sure the new is better than the old and worth doing, which in most cases is true. Most modern companies are structured and work that way. They have brilliant people from all generations and cultures. BTW, you should check out AvE on youtube. He is a mining engineer and a brilliant guy but you know what, he has a Haas CNC milling machine for part design/fabrication. He's moving/keeping up with the times. Now as far as you working with "incompetent" guys, I guess you must just have shit management or you are the last of a dying breed of people. Maybe the world has moved on from people like us who can repair to a module replacement business model. I can't say in your field but it may make better economical sense. It most definitely does in my field. Maybe the precision of parts in your field now required swapping out machine components ? Maybe tolerances are a lot tighter now ?
@pentachronic3 жыл бұрын
@Tony Wilson Watch this and tell me tha the old way is better !! kzhead.info/sun/gNSYdrSin2mhdXk/bejne.html
@pentachronic3 жыл бұрын
Very informative and presented well. Thanks!!
@tomherd41797 жыл бұрын
I have never used anything like this in my life but found the video absolutely fascinating!
@davidking54683 жыл бұрын
Thanks a lot! Great video, very informative.
@MrNemonsteri7 жыл бұрын
thank u for uploading this, helped me very mutch since iam new in cnc education thanks again
@ammarmustafa19504 жыл бұрын
nice it's very useful to me with my study....thank you I appreciate that
@robin2.7707 жыл бұрын
You can learn from this video more than what you can do in 2 years of studying these things!
@BaradaGuitars3 жыл бұрын
this IS what they teach in school at least in canada. but nothing is perfect and obviously outdated too. when is this from? early 2000s.....
@derick34823 жыл бұрын
Thank You, I have many cutting tools that need the cutting triangles. Confusing to me.
@gatorwing62313 жыл бұрын
Great video. Very informative. I epically like that part at the beginning where they leave a threat to sue if anyone shares this.
@macgyver151478 жыл бұрын
यह टूल कहां मिलता है
@sarfaraja22836 жыл бұрын
No. Thats not what it says. You cannot use this video without permission in your business and charge people by duplicating this video. You can send people to KZhead but thats it.
@FrustratedBaboon6 жыл бұрын
Lol
@flapperf42375 жыл бұрын
This video is award winning. I just nominated it for the 2021 Oscars.
@rusticagenerica3 жыл бұрын
Thank you, now I know something about metal cutting.
@Phobos_Deimos3 жыл бұрын
Well expaination and covered more information ...Thanks a lot for the great video
@mohanm15875 жыл бұрын
Very good video. Request to provide a small programme to select certain insert parameters by inputting hard points of machining process in question.
@chandrakantdange66663 жыл бұрын
I follow Kurtis at CEE in Queensland Australia and he puts the type of inserts he uses in his videos and now I understand what he means after watching this video thankyou
@peterwilliams47952 жыл бұрын
Brilliant, thank you!
@cossiedriverrs4 жыл бұрын
I may never use this information but it looks cool
@KingBoneezee5 жыл бұрын
Good one! Found no mistakes and it covers some imporant, but not well-known things - great content for 25 mins video
@romanplutok62026 ай бұрын
Good information for lathe machining. 좋은 정보임 ^^ Thank you.
@user-nj1wp1vl7b3 жыл бұрын
Exceptional video. thanks very much for posting it.
@jimburnsjr.7 жыл бұрын
Uno de los mejores videos que he visto con diferencia.
@Alicia376877 жыл бұрын
Very informative video, thanks.
@flaplaya7 жыл бұрын
fla playa
@halilyuksel15567 жыл бұрын
Very informative video, amazing machine ingeneering work.
@alisardo11195 жыл бұрын
Thank you very much for this great effort/ it is very useful video
@devarshivyas5 жыл бұрын
A wealth of information thank you's.
@GottliebGoltz4 жыл бұрын
A very good aknowlage able video. Briefing deeply machining machanisam.
@waheedahmed20937 жыл бұрын
Excellent, many thanks indeed... I learned a LOT :-)
@cossiedriverrs3 жыл бұрын
very usfull information I watch full video thanking you sir janakiraman
@janakiraman88115 жыл бұрын
Хорошее видео!Не понимаю я Английский язык-но по фильму всё понял!Такие резцы у нас в СССР были в 1985 году-сам я учился на токаря и работал ими!Названы они были по Фамилии изобретателя!Набор сменных победитовых пластин-до сих пор дома лежат!Спасибо за видео всем удачи и большой привет из России!
@goodsaw81997 жыл бұрын
Leila. Habib He's written that he doesn't speak and understand english but this video carries back him graduating tech college 30 years past. So he wants to brag that he's keeping a set of such inserts since that time and yet no doubt that he is from russia.
@stanbondarev92567 жыл бұрын
настроил переводчик-друг мой я понял тебя!Ролик озвучен не на английском языке!?right?Спасибо за притензию-буду внимательней!Смотрел видео очень тихо!Зачем слушать громко-если не понимаешь языка-если конечно это песни не Бон Джови!?Удачи восемь раз!!!!!!!!
@goodsaw81997 жыл бұрын
на английском, конечно -- американский вариант, правда. Но суть в том, что невозможно "национализировать" Интернет -- и это большое благо. Даже "языковой барьер" оказывается не такой уж и непреодолимый -- быстрой найдётся кто-то, кто поймёт тебя и переведёт твою речь тому, кто не понял. Но английский учить очень надо -- это по факту международный язык общения. А машинный перевод ещё долго будет "курить нервно в сторонке". И такие видео -- хорошее средство для освоения языка: по видеокартинке и своему опыту понимаешь, что происходит, а по слуху сопоставляешь, как это описывается на изучаемом языке. Желаю успехов.
@stanbondarev92567 жыл бұрын
Que mierda hace un ruso aqui!!!!. English or Spanish please...
@miguelarevalo49866 жыл бұрын
@Leila Habib Because he does not know English, ma'am!
@mrmissdestiny59535 жыл бұрын
Excellent video (Cutting Tool Geometries Lathe and Mill SME) could you give me one in Spanish please
@josmellsalcedoeguizabal2586 жыл бұрын
A very good video, but I came here hoping to find info on whether to 'invest' in a face mill cutter for my hobby mill. At 16.40 the parameters to consider when choosing a facemill surprisingly do NOT include available horsepower of the machine. I'm worried that replacing a single point flycutter with a 4 or 5 point face mill, means that I'll need (theoretically) 4 or 5 times the power.
@The007Weasel5 жыл бұрын
The channel "NYC CNC" is a pretty good resource in terms of finding the correct hp for a tool. They even provide a spreadsheet that calculates the hp required for a specific tool and cut size. The calculations are tailored to endmills so they may not fit perfectly but hopefully this helps.
@farmersonly7002 Жыл бұрын
Thank you so much!...
@tinh40757 жыл бұрын
отличное видео !!было бы с переводом вообще было бы шикарно
@levangogichaev76234 жыл бұрын
Thanks for the information.
@1287898427 жыл бұрын
I learned enough to attempt a project, and just enough to probably screw up a few times.
@garyr70273 жыл бұрын
Me too...
@hannibal2.0673 жыл бұрын
Shame I couldn't get my boss to watch something like this.
@flobeeonekinobee23536 жыл бұрын
All these leave me with is more questions. Although it did help some. I need to find some good cutters for small lathes and a bridgeport.
@TheMetalButcher7 жыл бұрын
Agree. Great video, but targeted for higher end industrial cnc type users. I came away with the same thoughts as you as well. But still worth watching and learning.
@tomherd41797 жыл бұрын
try mini lathe tool in market
@mohdafiq23957 жыл бұрын
For the Bridgeport I would only recommend high speed steel end mills. 2 flutes for aluminium, 4 for steel. A single point fly cutter with a carbide insert could work, too. Such machines don't have the power or rigidity to make good use of multiple insert face mills. For small lathes again high speed steel is just fine. it is significantly cheaper and you'll learn a lot more about cutter geometry while grinding your own tool bits. Abom79 has a great video on HSS tool bits with a chip breaker. Cutting tools with brazed on carbide can be very useful for steel as well. If you must get carbide inserts, DCGT is a good one to start with. I'd strongly recommend using different inserts for steel, alu, and stainless steel. It makes a huge difference in performance. Hope that helps! Source: machinist
@kv43027 жыл бұрын
mohd afiq
@jeancampbell83607 жыл бұрын
Too: mohd afiq, "Mini lathe tool in market"? Please expand a little. Searched and got me nowhere good. Thanks.
@soarster6 жыл бұрын
Awesome presentation. Very informative
@kennedy7502 ай бұрын
thank you, nice to see and learn about it
@kreasiumum3 жыл бұрын
very helpfull video thank you sir.
@rakeshjasud47855 жыл бұрын
Great info. Thank you
@donaldnaymon32704 жыл бұрын
It was soo coool! Thx you! Sub , and Like. It is the best movie about tool's what have I ever seen.
@piotrmajor1126 жыл бұрын
Very very Nice knowledge ... really nice...
@DSP_DJ6 жыл бұрын
I really love Mechanical Engineering am I teach and I hope to succeed in it
@souadzh12727 жыл бұрын
hahaاha.... but I love kpop insted.... sdnd my beautiful queens
@alirezaamiri795 жыл бұрын
Great video, thanks!
@horvis1varnsdorf3 жыл бұрын
Sir please also let me which type of chips should form in continuous peeling machine
@dheereshsharma87976 жыл бұрын
Sir we have a continuous bar peeling machine and the dia of the bar is 10.00 mm and depth of cut is .50mm but I am not able to tool as on the surface tool marks observed .
@dheereshsharma87976 жыл бұрын
tanks for the info . cheers .. simplify the life ..
@mcozpda33924 жыл бұрын
thank you for this video
@tomaskn7 жыл бұрын
Tomas van eccelpoel ..
@yogindernathsharma42596 жыл бұрын
Absolutly great video
@amandastek69755 жыл бұрын
Sir ... I want another 43 videos of SME... Fundamentals of manufacturing process video series
@sreelu236 жыл бұрын
Sir, pls send the link for remaining videos .. sreevasthava.3323@gmail.com
@sreelu236 жыл бұрын
how are made the tools , what kind of ingredients have?
@bunga877 жыл бұрын
wich machine made this cutting tools, I want how to make it Not how to use, anyway it is great video thanks for sharing with us good job
@saidabdulle45927 жыл бұрын
Said Abdulle benb
@alantovey81987 жыл бұрын
"each insert edge alternatively enters the cut" Punk? New Wave?
@nickhulme53317 жыл бұрын
good explaination
@curiosity63208 жыл бұрын
effective knwldge thank you
@salmanmns38757 жыл бұрын
Although your video has a very clear accomplishing voice it would be grade if you wrote your English subtitles down, because it's slightly difficult to understand a lot of your technological terms for foreigners. In the whole it's a good introducing video.
@Parfen_Rogojin7 жыл бұрын
In the settings on the bottom right, you can now change the speed of the video to slow it down or speed it up. Slowing it down can help comprehension, and speeding it up is good when the person talks slow or takes too long to give the information you're looking for.
@origamimavin6 жыл бұрын
Excellent!
@spatialguy55715 жыл бұрын
please suggest me i have a rotating peeler machine but can't find the best tool bit. we want to tool nickel alloys but we dont know which design is suitable for us. Please suggest me if you have some suggestions
@dheereshsharma87976 жыл бұрын
Thanks a lot ....
@omkarmadekar15877 жыл бұрын
Whats the difference between chamfer and radious on the edge
@surajkumaramishra6 жыл бұрын
Are those industrial diamond ?
@1287898427 жыл бұрын
I like you excellent work, but please how can I get those cutting tools, am a leaner, and am lack of tools please help me to get some
@elijahopoku90274 жыл бұрын
FUE MUY EDUCATIVO EL VIDEO AUNQUE ESTE EN INGLES LAS MAQUINAS HERRAMIENTAS ME FASCINAN SOY ING. MECANICO ESPECIALISTA EN MAQUINAS HERRAMIENTAS
@guillermobautista72437 жыл бұрын
I enjoyed this.
@mrcpu99993 жыл бұрын
beast job
@gengizkirkuk72557 жыл бұрын
Thank you for unique vedio
@avijitroy92564 жыл бұрын
v good vidio sir
@saleempahthan5895 жыл бұрын
Very good and instructive
@michaelbabatunde39154 жыл бұрын
obrigado, vou traduzir isso.
@dudaprates17 жыл бұрын
Reverend Lovejoy 👍👍👍
@The_Joker_7 жыл бұрын
this is a damn good video
@mva80823 жыл бұрын
I wish I had a 16mm projector to watch this on.
@arpeggi2999 Жыл бұрын
Not even a minute in and I've seen nothing but kennametal tools lmao.
@jr5401234 жыл бұрын
I am facing a trouble of machining SAE8620 material. I can't find a suitable tool
@piyushthakare34955 жыл бұрын
I like this videoclip. G...❤
@Gabriel-qo4ih8 ай бұрын
Kindly suggest me a good turning tool the blank dia will be 25 mm Turning Dia will be 20.1. I am searching tool for my Traub machine
@piyushthakare34955 жыл бұрын
piyush Thakare call me
@babasahebkalepatil13994 жыл бұрын
kudos to those who stayed up nights and broke a lot of carbide perfecting this stuff...
@irredeemabledeplorable52272 жыл бұрын
Very good information Thanks
@nadeemtajraja23134 жыл бұрын
17:50 A right hand cutter rotates counter clockwise. And left hand cutter rotates clockwise? Yeah if your looking at it from the bottom up! But I always thought you look at it from the top down! The videos statement about the hand of a cutter is backwards isn't it?
@zaz4667 Жыл бұрын
thanks too much
@musallamarwani21677 жыл бұрын
that seems like it was cobbled together from other videos.
@jg001632067 ай бұрын
Хорошее видео, знаю английский но принципиально писать буду по русски, хочу также предложить учить русский язык пригодится когда совместно будем жарить барбекю на Марсе, не всегда же нам какашками бросаться. Хочу напомнить что только русский может себя подорвать гранатой если видит перед собой врага. Давайте дружить. GOOGL вам в помощь для перевода.
@user-xu9rm8ps9z6 жыл бұрын
Thank you
@christopherclark84545 жыл бұрын
So nice.....👌
@r.s.h15233 жыл бұрын
i need this tool... any body have idea...from where it purchase?
@muhammaddawood93653 жыл бұрын
Are we allowed to show this at my shop?
@19MadMatt72 Жыл бұрын
The vidio is excellent but I would like to send me in a Portuguese version this would help me a lot by Gentilesa send me the VT in Portugues OK...
@mestrefalcaoartistaplastic30015 жыл бұрын
Hi sir please give one video about tool momentum calculation
I have been using insert tooling for one half of a century, and I must say that I gained an appreciable amount of knowledge from this video. Thank you very much.
Y would u say half a century like that
@@ilikewaffles3689 y wuld u tipe with 1 lehter like that.
@@ehss192 my guy...
Very informative. Being new to this field, was looking for something like this. Thanks !
really good explanations.
I'm newish to the trade, so videos like this help me tremendously. Thank you.
very good Video! Im new in machining since 1 Year and I am doing my apprenticeship in the next 3 Years now. Its amazing to have this video. I learned alot to create a better chip action etc. . Thx alot!!
I absolutely love this video. Very informative. Thank you so much. I'm trying to get back into machining parts and pieces.
Brilliant informative video that will have left most of us with an open mouth and a look of utter confusion 😂
Excellent description & demonstration ! It is very helpful to students ,technicians ,engineers & manufacturers ! Thanks a lot for your valuable explanations !
I never used a cutting machine (other than maybe a drill and a saw), but modern machines always fascinate me, and this video did bring some light to design decisions and how it works.
It is with great sadness that after 60 + years of active machining I realise that I really know nothing when it comes to turning and milling with today's modern insert tooling...…...but all is not lost, I just invested in a bunch of tool holders and inserts on Bangood and am set to relaunch my career.....in terms of years, 80 is the new 40 so they say.... just gotta get outta my chair more often.
@Tony Wilson Everything you wrote ignores the fact that it is money that drives the engine of commerce. What is the point of producing goods that you cannot sell because the Chinese are selling the same thing just as good and cheaper. Old skills are as they are.....old and out of date and they will never compete on the playing fields of todays manufacturing or marketing. It's good to know how to sharpen a HSS tool blank but when the factory is heavily into carbide insert technology HSS has no place on the menu......unless you're a hobby worker in a backyard garage scratching a living. I'm a golden oldie, extremely long in the tooth but I detest old fashioned ideas and methods. To solve the problem of supply you must cater for the market or die in the dust......nobody wants or loves a hasbeen especially in high tech manufacture......you have to compete, but more so you have to be a better competitor than your opposition, and you have to be able to exist on a bowl of rice and 2 bucks a day to stay in the race......metaphorically speaking. The end message is do what you do best and don't look at the stars when you are still crawling around on the ground.
@Tony Wilson Well one thing's for sure, even if I have 60 + years at the coal face, working with 2020 engineering methods still doesn't make me a wunderkind because I can read a drawing or grind a tool.....that is old school and if you want to exist in the modern workplace of today you have to be in the know with current practices.....my experience is basic, learned in the late 50's, but so was Trevethick's when he invented steam engines that pumped water out of deep mine shafts.....that was with beam engines and despite all his know how nobody would employ him today if he was still around. In essence, one must grow with the technology, embracing it as it evolves and improving and promoting it for your personal agenda. I don't think anyone can accumulate all the past knowledge and be a jack of all trades.....I would say that if you evolve in your job description you will soon lose the basic skill ability due to lack of practice and unuse. Who would want to still do CAD designing when you get promoted to seniority and guide the ship instead of working on it. Engineering is one area that is expanding in new ways to make it more profitable for manufacturers, and that means if you can't keep up with the flow you will be sitting in the back row watching it happen. The other side of the coin is profitability, no matter how you get to it the bottom line will always be the deciding factor in manufacturing. The Chinese have hit the button square on the jaw.......but their culture and wage structuring has a lot to do with their prosperity and the West will not match that scenario while they are driven by money for time.
@Tony Wilson I know your reasoning is well intended but from a realistic standpoint, using the latest CNC is way more repeatable and way more accurate than the old milling methods. Yes it takes an experienced Engineer to figure out the best profiles and methods to machine a part that has the highest quality/strengths etc. But at the end of the day it all comes down to what is NEEDED. We can philosophise about the good old days when we made hand crafted stuff that would/and has lasted a century, but if you're making a base for a frying pan that will be disposed of in 5 years, why worry about it ? I work in the electronics/semiconductor business and I have seen massive strides in automation and the workflow. The modern pick and place machines are incredibly efficient and accurate. Why would I want a factory floor with people hand placing when the economies and accuracies of CNC machines far far outweighs the cost of people ? We have to keep learning and have to accept that our industries change. It's the nature of the beast. Evolve or die, as they say!!
@Tony Wilson I am over 50 and have designed a massive amount of electronics in my career. I have designed space systems through to consumer electronics and have designed a lot of products. I am a bench development kind of person and have a lot of hands on experience. Don't be so patronising please. The point is that one has to move with the times. If I had the attitude of I must do everything by hand I would not be designing muliti million gate asics and ICs. The tools, compilers, CAD and software along with the manufacturing technologies have changed rapidly in the last 10 years. I have to evolve and keep up with that. If I have to use automation, so be it. It's the same with mechanical engineering. Yes maintenance is an issue, but design in based on solid foundations. You now have 3D printing, metal sintering, SLA and 3D metal fabrication technologies. They bring in new techniques and better efficiencies such as completely enclosed manifolds which could not be machined using older techniques. New alloy fabrications with mixed ceramic technologies, lighter weight pourous materials, carbon fibre 3d printing. The world is changing. Whether you like it or not. There will always be a need to maintain older equipment however there will be a time where that equipment becomes obsolete and is replaced by newer/faster/better/more efficient designs. It's called progress. Mining equipment is changing. New CNC higher accuracy, higher speed techniques are/have been developed to improve efficiencies of mining too. Maybe slower than other industries but it is changing. This is not to say that solid engineering foundations should be ignored, but also, with that said, neither should new approaches using modern techniques be poo-poo'ed either. This is where we meet in the middle and make sure the new is better than the old and worth doing, which in most cases is true. Most modern companies are structured and work that way. They have brilliant people from all generations and cultures. BTW, you should check out AvE on youtube. He is a mining engineer and a brilliant guy but you know what, he has a Haas CNC milling machine for part design/fabrication. He's moving/keeping up with the times. Now as far as you working with "incompetent" guys, I guess you must just have shit management or you are the last of a dying breed of people. Maybe the world has moved on from people like us who can repair to a module replacement business model. I can't say in your field but it may make better economical sense. It most definitely does in my field. Maybe the precision of parts in your field now required swapping out machine components ? Maybe tolerances are a lot tighter now ?
@Tony Wilson Watch this and tell me tha the old way is better !! kzhead.info/sun/gNSYdrSin2mhdXk/bejne.html
Very informative and presented well. Thanks!!
I have never used anything like this in my life but found the video absolutely fascinating!
Thanks a lot! Great video, very informative.
thank u for uploading this, helped me very mutch since iam new in cnc education thanks again
nice it's very useful to me with my study....thank you I appreciate that
You can learn from this video more than what you can do in 2 years of studying these things!
this IS what they teach in school at least in canada. but nothing is perfect and obviously outdated too. when is this from? early 2000s.....
Thank You, I have many cutting tools that need the cutting triangles. Confusing to me.
Great video. Very informative. I epically like that part at the beginning where they leave a threat to sue if anyone shares this.
यह टूल कहां मिलता है
No. Thats not what it says. You cannot use this video without permission in your business and charge people by duplicating this video. You can send people to KZhead but thats it.
Lol
This video is award winning. I just nominated it for the 2021 Oscars.
Thank you, now I know something about metal cutting.
Well expaination and covered more information ...Thanks a lot for the great video
Very good video. Request to provide a small programme to select certain insert parameters by inputting hard points of machining process in question.
I follow Kurtis at CEE in Queensland Australia and he puts the type of inserts he uses in his videos and now I understand what he means after watching this video thankyou
Brilliant, thank you!
I may never use this information but it looks cool
Good one! Found no mistakes and it covers some imporant, but not well-known things - great content for 25 mins video
Good information for lathe machining. 좋은 정보임 ^^ Thank you.
Exceptional video. thanks very much for posting it.
Uno de los mejores videos que he visto con diferencia.
Very informative video, thanks.
fla playa
Very informative video, amazing machine ingeneering work.
Thank you very much for this great effort/ it is very useful video
A wealth of information thank you's.
A very good aknowlage able video. Briefing deeply machining machanisam.
Excellent, many thanks indeed... I learned a LOT :-)
very usfull information I watch full video thanking you sir janakiraman
Хорошее видео!Не понимаю я Английский язык-но по фильму всё понял!Такие резцы у нас в СССР были в 1985 году-сам я учился на токаря и работал ими!Названы они были по Фамилии изобретателя!Набор сменных победитовых пластин-до сих пор дома лежат!Спасибо за видео всем удачи и большой привет из России!
Leila. Habib He's written that he doesn't speak and understand english but this video carries back him graduating tech college 30 years past. So he wants to brag that he's keeping a set of such inserts since that time and yet no doubt that he is from russia.
настроил переводчик-друг мой я понял тебя!Ролик озвучен не на английском языке!?right?Спасибо за притензию-буду внимательней!Смотрел видео очень тихо!Зачем слушать громко-если не понимаешь языка-если конечно это песни не Бон Джови!?Удачи восемь раз!!!!!!!!
на английском, конечно -- американский вариант, правда. Но суть в том, что невозможно "национализировать" Интернет -- и это большое благо. Даже "языковой барьер" оказывается не такой уж и непреодолимый -- быстрой найдётся кто-то, кто поймёт тебя и переведёт твою речь тому, кто не понял. Но английский учить очень надо -- это по факту международный язык общения. А машинный перевод ещё долго будет "курить нервно в сторонке". И такие видео -- хорошее средство для освоения языка: по видеокартинке и своему опыту понимаешь, что происходит, а по слуху сопоставляешь, как это описывается на изучаемом языке. Желаю успехов.
Que mierda hace un ruso aqui!!!!. English or Spanish please...
@Leila Habib Because he does not know English, ma'am!
Excellent video (Cutting Tool Geometries Lathe and Mill SME) could you give me one in Spanish please
A very good video, but I came here hoping to find info on whether to 'invest' in a face mill cutter for my hobby mill. At 16.40 the parameters to consider when choosing a facemill surprisingly do NOT include available horsepower of the machine. I'm worried that replacing a single point flycutter with a 4 or 5 point face mill, means that I'll need (theoretically) 4 or 5 times the power.
The channel "NYC CNC" is a pretty good resource in terms of finding the correct hp for a tool. They even provide a spreadsheet that calculates the hp required for a specific tool and cut size. The calculations are tailored to endmills so they may not fit perfectly but hopefully this helps.
Thank you so much!...
отличное видео !!было бы с переводом вообще было бы шикарно
Thanks for the information.
I learned enough to attempt a project, and just enough to probably screw up a few times.
Me too...
Shame I couldn't get my boss to watch something like this.
All these leave me with is more questions. Although it did help some. I need to find some good cutters for small lathes and a bridgeport.
Agree. Great video, but targeted for higher end industrial cnc type users. I came away with the same thoughts as you as well. But still worth watching and learning.
try mini lathe tool in market
For the Bridgeport I would only recommend high speed steel end mills. 2 flutes for aluminium, 4 for steel. A single point fly cutter with a carbide insert could work, too. Such machines don't have the power or rigidity to make good use of multiple insert face mills. For small lathes again high speed steel is just fine. it is significantly cheaper and you'll learn a lot more about cutter geometry while grinding your own tool bits. Abom79 has a great video on HSS tool bits with a chip breaker. Cutting tools with brazed on carbide can be very useful for steel as well. If you must get carbide inserts, DCGT is a good one to start with. I'd strongly recommend using different inserts for steel, alu, and stainless steel. It makes a huge difference in performance. Hope that helps! Source: machinist
mohd afiq
Too: mohd afiq, "Mini lathe tool in market"? Please expand a little. Searched and got me nowhere good. Thanks.
Awesome presentation. Very informative
thank you, nice to see and learn about it
very helpfull video thank you sir.
Great info. Thank you
It was soo coool! Thx you! Sub , and Like. It is the best movie about tool's what have I ever seen.
Very very Nice knowledge ... really nice...
I really love Mechanical Engineering am I teach and I hope to succeed in it
hahaاha.... but I love kpop insted.... sdnd my beautiful queens
Great video, thanks!
Sir please also let me which type of chips should form in continuous peeling machine
Sir we have a continuous bar peeling machine and the dia of the bar is 10.00 mm and depth of cut is .50mm but I am not able to tool as on the surface tool marks observed .
tanks for the info . cheers .. simplify the life ..
thank you for this video
Tomas van eccelpoel ..
Absolutly great video
Sir ... I want another 43 videos of SME... Fundamentals of manufacturing process video series
Sir, pls send the link for remaining videos .. sreevasthava.3323@gmail.com
how are made the tools , what kind of ingredients have?
wich machine made this cutting tools, I want how to make it Not how to use, anyway it is great video thanks for sharing with us good job
Said Abdulle benb
"each insert edge alternatively enters the cut" Punk? New Wave?
good explaination
effective knwldge thank you
Although your video has a very clear accomplishing voice it would be grade if you wrote your English subtitles down, because it's slightly difficult to understand a lot of your technological terms for foreigners. In the whole it's a good introducing video.
In the settings on the bottom right, you can now change the speed of the video to slow it down or speed it up. Slowing it down can help comprehension, and speeding it up is good when the person talks slow or takes too long to give the information you're looking for.
Excellent!
please suggest me i have a rotating peeler machine but can't find the best tool bit. we want to tool nickel alloys but we dont know which design is suitable for us. Please suggest me if you have some suggestions
Thanks a lot ....
Whats the difference between chamfer and radious on the edge
Are those industrial diamond ?
I like you excellent work, but please how can I get those cutting tools, am a leaner, and am lack of tools please help me to get some
FUE MUY EDUCATIVO EL VIDEO AUNQUE ESTE EN INGLES LAS MAQUINAS HERRAMIENTAS ME FASCINAN SOY ING. MECANICO ESPECIALISTA EN MAQUINAS HERRAMIENTAS
I enjoyed this.
beast job
Thank you for unique vedio
v good vidio sir
Very good and instructive
obrigado, vou traduzir isso.
Reverend Lovejoy 👍👍👍
this is a damn good video
I wish I had a 16mm projector to watch this on.
Not even a minute in and I've seen nothing but kennametal tools lmao.
I am facing a trouble of machining SAE8620 material. I can't find a suitable tool
I like this videoclip. G...❤
Kindly suggest me a good turning tool the blank dia will be 25 mm Turning Dia will be 20.1. I am searching tool for my Traub machine
piyush Thakare call me
kudos to those who stayed up nights and broke a lot of carbide perfecting this stuff...
Very good information Thanks
17:50 A right hand cutter rotates counter clockwise. And left hand cutter rotates clockwise? Yeah if your looking at it from the bottom up! But I always thought you look at it from the top down! The videos statement about the hand of a cutter is backwards isn't it?
thanks too much
that seems like it was cobbled together from other videos.
Хорошее видео, знаю английский но принципиально писать буду по русски, хочу также предложить учить русский язык пригодится когда совместно будем жарить барбекю на Марсе, не всегда же нам какашками бросаться. Хочу напомнить что только русский может себя подорвать гранатой если видит перед собой врага. Давайте дружить. GOOGL вам в помощь для перевода.
Thank you
So nice.....👌
i need this tool... any body have idea...from where it purchase?
Are we allowed to show this at my shop?
The vidio is excellent but I would like to send me in a Portuguese version this would help me a lot by Gentilesa send me the VT in Portugues OK...
Hi sir please give one video about tool momentum calculation
good job
THANKS VERY MR
sir any hard tool kit they cut hard bering
Pongan subtítulos!