Replacing plastic pipe fittings for copper!
2024 ж. 12 Сәу.
18 239 Рет қаралды
Asmr plumbing video of Replacing old plastic pipework for copper in pressfit. All this work for a new washing machine tap because of the plastic fittings!
The fittings are on there solid so had to be cut out. Replaced with copper press fittings for ease and to reduce flux into the system. All test perfectly and a new washing machine valve was installed!
Sit back like and subscribe and I will see you on the next asmr plumbing video!
So good!
Thank you!
The “ don’t use jointing compound on compression fittings” brigade will make a appearance soon 😂
Always mate!
Using jointing compound on compression fittings makes a whole load of sense and guarantees zero callbacks
40 years a plumber as an apprentice I was always told never have a dry compression joint, meaning jointing compound every time Besides why do they make it otherwise
Only a Muppet would do a dry compression joint
Every time I’ve forgotten to use JC on a compression fitting, it’s leaked.. my boss always said.. “belt and braces, innit..”
Yet another super video 👍
Thanks buddy
Great job
Are thise like the C1 angled clamps from RIdgid?
Smooth✌👍
You're a superstar
What size Wera do you use for the 15mm nuts etc cheers
Can you do a lead ball joint
Nice job 👏what press gun do you use
Novopress mate it’s the same as the Milwaukee one
@@mmplumberWhat camera/tripod do you use to not slow down work speed?
Can you use press fittings on older imperial sized pipes?
I wouldn’t no I would always solder to a new size pipe then press it you have to
didnt know you could use the fluxuator with jointing comp
Trend setter mate
Use pipe dope on everything.
He can afford that expensive machine, but leaves half the old pipework and re uses the old fittings? Mismatch old and new looks terrible
Gloves not affordable. 😂
That’s meccano not plumbing
you must be an old-school New York plumber. I called the plumbers here in Florida rip, shiite or busters.
This is in the UK
@@bicolouredprawn THX
Guys is thread tape seal still used or now you are using the paste and wat is the name of those copper fittings that a tightened by a machine