Fuel Injection cleaning in less than 5 Minutes/HOW TO clean injection Directly without disassembling
#ALIMECH #injection #cleaning #toyota
How i made the wire: • Make your DIY Fuel Inj...
Push switch: s.click.aliexpress.com/e/_9watAN
Alligator wire clip: s.click.aliexpress.com/e/_9iOwuz
Injector Tester AND adapter: amzn.to/3JJXXfQ
100pcs Fuel Injector Precision Filter: amzn.to/4bhx7at
In this video, i will show you Fuel Injection cleaning in less than 5 Minutes , how to Clean the fuel injection of any car in less than 5 minutes Directly without disassembling any injections, it will be direct injection cleaning by connecting carb cleaner can to injector rail, and staring up the engine BUT keep in mind to remove the fuel pump fuse or the fuel pump harness, like i did, because we don't need fuel pump to push gasoline, the fuel line is disconnected, carb cleaner can connected instead with an adapter
this is the easiest way of HOW TO clean injection Directly without disassembling of any car
Half of carb cleaner can can give you best results, and if you of you do it with the whole can, even better
THIS IS MY WAY, I DIDNT COPY ANYONE
I did this method for the first time Jan 27, 2017
• Fuel Injector cleaning...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : facebook.com/ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh
In this video i run the engine for over 4 mints with carb cleaner(No Fuel): kzhead.info/sun/iqxvhcegj4aAfZs/bejne.html
So thank you for not spending 17 minutes telling us your theory and inspiration for this idea. TO. THE. POINT. good tip too. love the adapter you made.
Thanks for watching, I like to make it short as possible
@@craigclemmer3979 @
How can someone give a dislike to this video it helped me an old carburetor guy
Glad it was helpful
going through the effort of actually taking out the fuel injectors and actually demonstrating what happens is amazing. this is how how to videos are done
Thanks Lan, glad it was helpful
best comment
Lan! Hahahahah.
100% agreed. The extra mile to make sure we're not just sold faulty information.
Nice effort.... I think once you remove injectors, you have to change nozzle seals too.... Nice!!
Simple.... Stright to the point.... easy to understand.... No bullsh*t backgroud music.... I like that.....👌
Thanks Don appreciate that
whhhhhats up youtube its ya boiiiiiii!!!
I lol’ed.
Thanks for the no BS video😁
Thanks for supporting 🙏
I may never have to personally physically do this myself, but it was satisfying to watch, this is how a "How to" video must be done. Straight to the point no bull shit or long intro, thank you. Liked and subscribed
Thanks, appreciate that
I'm with you. Last night I got nicotine ill, so I tried some videos for help..... long intro's until 1 minute of what I was looking for after 5 - 10 of what I could care less.
Cant stand when they talk about irrelevant shit
what do you mean you dont have to physically doing it?
You have on of the best demonstration on injector cleaning on the internet, I was taught by a great mechanic back in the eighties this procedure. Outstanding job.
Thanks 👍, im glad my video helped you
I agree, my fuel line is buried so I have to do the injectors individually with the battery... Question can I use small cables with a switch on a spare car battery or should I get a smaller battery for this job?
@@ijmcnaught you can do it with the car battery because any load only takes as much amps as it needs regardless of how much more the battery can provide (it's only bad if the battery has less amps than what the load needs, an injector needs like maybe 0.01 Amp while the battery can provide 50+ Amps). As for the voltage, it always has to match or be very close (injector needs ~12V and battery delivers ~12V so it's fine, although the injector can withstand anything from 9V to 20V)
In just 3 minutes presented the million-dollar content. Awesome.
Thanks Traveler, glad that its helpful
Thanks for the valuable information. This might be a stupid question but that was a diesel engine right???
I hope my e36 have the same problem because it doesn't run well. Ill try it and comment again. Thanks 😊
Would it work on my diesel engine w
I feel its a billion-dollar content... Must check out ours too..!
Now that’s what I call a very helpful video ! No need to buy a $100.00 tool, just use what you have around the shop! Thank you very much!
Thanks brother
Right to the point, enjoyed this video. Also, thanks for not adding music as it is distracting. Good results & clear instructions are music to my ears.
Awesome video! I love that you show the results with the injectors pulled out for us to see!
Thanks for watching Brandon 🙏🏻🙏🏻
Bro this is how your content should be can't believe this video has over 1 million views . Awesome short sweet and straight to the point
Thanks man, I like to keep it short as possible
easy to understand. simple. straight to the point. Learned something. Thank you so much for the video.
This is how every "how-to" video should be like. Thanks Ali! You just earned a new subscriber (I'm glad I found you)
Thanks , appreciate that, glad you like it
The Good side of KZhead. Learning something that could really help.
Of course, glad that my videos helpful
And save monny
@@alfaromeomalta6017 Yes. That too.
Straight to the point. Easy to understand. You should be the standard for all how to videos
Thanks, all my videos like that, I don't like to waste time
- no hip hop or lounge Music - no Animations - no Jump-Cuts - NO BS !!! Well explained and straight to the point !!!
Thanks for watching 🙏🏻
This was cutting edge yet so simple and articulate. Thanks
Thanks brother
This is one of the best Videos on DIY videos i have ever watched. You are such an inspiration.
Thanks for watching
Just got done making my cleaning line tool with the straw and fuel line. Great video, thanks
Thanks, that's awesome
Did you use it yet??
So did this work for you?
Nice always ways to get final results and doesn't have to be a pile of cash! Thanks and I bet I do this day before my next oil change. Better spray pattern better mpg's and we all need them these days. Oil change doesn't matter fuel just burns and blows out the pipe.
i rarley subscribe to channels, but your simple and to the point video without any 10min personal story first, then 10 min "safety" speech. just straight to the point. i like this.
Thank you for the effort to show us the real thing and how fuel injectors actually shoot the fuel and the difference after cleaning. Good job!. Worth more than a thousand words.
Thanks, appreciate your words, it means a lot to me
nice to learn something everyday
Yes always ✌
Thanks for the video! What a great idea with the battery and triggering the solenoid.👍🏻
Thanks 🤜🤛
Very simple way of cleaning the injectors I’ve ever watched. More power💪
Cleaning is more important for unclogging or un-sticking injectors, which are misnamed. They don't "inject"; they are fuel valves. Outside of an engine, the evenness of the spray pattern it's just an indication that the flow though the valve is not impeded .The spray pattern isn't as important to combustion as the correct and consistent volume passed per pulse-second. The intake airflow and compression cycle of a running engine does most of the dispersion. Done in a car, the depressurized rail still has gas in it, just no pressure to allow it through the misnamed injectors. Cranking the car with the fuel pump not running will alternately push against and suck on open injectors. Allowing the car to run until the volume within the rail is consumed and it's running on only cleaner is what you want. Let it run to stalling with the cleaner can attached then sit for 5-15 minutes before re-attaching the fuel line and starting. This will give concentrated cleaner in the fuel rail more time to dissolve any remaining varnish within the rail and injectors.
Nice work ali thank u for helping out ppl God bless you and family
Thanks jesus 🙏🏻 appreciate that
You are absolutely amazing! I thank you for showing this method. Now, I can seriously clean my injectors. You're awesome!
Putting the injectors in a rail backwards, and back flushing them works good too. I have seen that unplug injectors with fine rust particles and barely any flow to start, come out spraying like a champ. Good vid.
That's awesome 👌🤜🤛
Sir.. That great... Can you share a source video to educate others.... Thanks....
Yes fixed it! Thank you sooo much! Had an check engine light and seen on tool it was a cylinder 6 missing, so I tried thisethod before taking out and engine light is no more!! Thanks again! Peace!
Like the comments say; To the point no B.S. no crappy music. Very helpful. Thank you. 👍🏻
Thanks 👍
Thank you for such a helpful video
Holy shit finally someone that can get to the point and actually teaches something useful, way to go 👍🏿👍🏿👍🏿clap clap clap
Thanks Ricardo, I don't like to waste time
@@AliMECH based
Fantastic 🥰. Good tutorial, best cleaning injector method i've ever seen.
Thanks for watching 🙏🏻🙏🏻
Hey Ali, love your videos!! You are a hero to us DIYers out here. Got a question, where can I get one of those super long carb cleaner spray hoses??? Love your fuel line adapter but what did you use inside the house to attach the spray tube to the fuel/multi purpose hose(line)???? A washer??? You showed us how to make it in the O2 sensor cleaning video. Thanks again for the great videos👍🏼👍🏼👍🏼
Thanks for watching, I bought seafoam and the long straw came with it, It doesn't matter if it's a long spray cleaner or not, and yes i used washer and super glue that comes with activator
Very cool fix! Simple yet so genius approach to a quick fix!
Thanks 🙏🏻
Sweet and short. 👌🏼 Straight to the point. 👊🏼 I'm doing it tomorrow.🇿🇦
Thats great, thanks for watching
Awesome how to video man, I just did this on my 89’ celica and no longer have a high rpm break up and have been getting way better mileage!!!
Thanks man, Glad it helped
First video of yours I've scene. Very thorough and really enjoyed it was very informational and not just instructive you actually gave a real example visually, excellent.
Glad it was helpful!
A real man clean his injectors by his own.
Thanks man, best one so far
I want to clean my shelf. But i can't understand fuel in line and fuel out line? How to identify that?
@@muhammedraihan7992 al final del riel de inyectores hay una valvula pequeña, por hay regresa al tanque, usa la otra, la que no tenga algun elementos extra antes de riel de inyecrores. Disculpa muy flojo para traducir
@@muhammedraihan7992 'at the end of the injector rail is a small valve, for there is return to the tank, use the other, the one that does not have any extra elements before injectors rail. -Huge Williams
Yes sir!
If this doesn't fix it, you should do a video how to change those little headers. It's also really easy and fun to do it.
this is beyond amazing, the job to pull out the injectors and rails in my car is quite heavy as I have to take off the throtle body, the plenum and then another intake fascia where the plenum fits , below everything are the injectors. God is love.
When I’m going to change the spark plugs I find it a good time to clean injectors. I pull the fuel pump fuse spray PB blaster in the cylinders, then spin the engine over coating everything in PB blaster. I let it soak over night. Then replace the old plugs and let the engine run for 15 minutes burning off all the PB blaster. After that I replace the old plugs with new ones. PB blaster penetrates, lubricates and eats away carbon build up on injectors and valves. Straight carb cleaner is dry and dissolves all the lubricants on your cylinder walls making your cylinders super dry after ignition.
A great video man I actually let my nephew use my car while I was out of town it's a Mercedes-Benz and he put 89 gas in it so my car's been putting so this might help it a lot I'm getting ready to send it to the shop but I think I might try this first myself hey thanks for the video buddy you just don't know how much you're really helping a lot of people keep up the great work pal and I'm subscribing to your channel to see what other stuff that you have great job
That's awesome! thanks for your feedback and support
89 octane would not have done that. I always run 87 in my two BMW's and Corvette with no problems
@@c.george7451 thank you sir for you info 🙏🏼👌🏼
Simple, well illustrated and explained. 👌
Thanks for watching
I followed your method and it worked great on my 7.4L Chevy Vortec, thanks!!!
Great to hear!
This is the video ive been looking for. Very easy to understand. Thank you for sharing.
Glad it was helpful, thanks for watching
Absolutely great video! Very informative and easy to follow. Thank you so much for sharing your knowledge with us, I'm very very grateful! Keep up the good work my friend!
Thanks, appreciate your feedback, 🙏🏻🙏🏻🙏🏻
Great video, and really LOVE the evidence of the results!
Glad you enjoyed it!
Brilliant idea, put forth in a simple understandable way. Good Job!
Thank you very much!
Hell yea bro.......great idea and way way less time consuming.....keep this great videos coming
Thanks, I will 🙏🏻🙏🏻
Vc pode tbm utilizar um relê 12v com um jumper no pino central ligado no normalmente fechado..
Sim, você pode fazer isso também
Straight to the point, no rambling, simple to understand and copy. Really like your vid. 👍🏽Subscribed
Thanks for watching and supporting 🙏
@@AliMECH awesome.
Directo al hueso, sin ambiguedades .....muy buenooooooo !!!
Gracias, no me gusta perder el tiempo
I will give this a try. Thank You for the tip!
Que buena idea, muy buen aporte 👍🏽👍🏽
Gracias por ver
Hi, nice video, thanks for this! One comment - according to my own experience, in serious cases when inner deposits couldnt be removed/ passed through, also opposite direction of cleaning flow should be considered. Based on my own case, when very old fuel filter got rusted and small rust particles clogged injectors... First it was very hard to find the the right cause as many different error messages. But, of course, opposite cleaning method supposes injectors removal.
Yes, you are absolutely right, sometimes there is small particles will be stocked in the fuel injectors, and only opposite cleaning can fix that
No need to go under the hood and disconnect the fuel line. A can of BG 44K in the fuel tank cleans everything the fuel touches. The whole fuel system and exhaust valves. Since it has no alcohol, this is expected to be more effective than alcohol-based counterparts like S F in getting rid of engine buildups. BG 44K in 20 gallons, and run down to 1/4 tank before next fill up. Better than S F..... pale oil, (light mineral oil), naphtha, and isopropyl alcohol (IPA) formula. Make your own. lol Have you ever seen a bent value from being too aggressive with the trigger and hydrolocking the cylinders? This is why pros use a proper tool that atomizes the liquid to about the same size as what comes out of an injector. BTW, many years ago, BG 44K was a warranty approved solution for Mazda/Ford engines that had engine knock due to carbon build up on the piston. And if done at a dealership complaint was N/C until the warranty was up and until an engine redesign fixed it. The simple method that works for me every other oil change.
@@chrishund3157 you can't hydrolock the engine how he did it, the engine is still running using the fuel trim cal. in the ecm meaning timing and duration of injection is the same... All he is doing is acting as the lift pump with the spray can to flood the injectors fill ports.... Learn a thing or two before you post, goof
@@ddeeccaaddeennccee Yeh he sounds like a 44k sales rep. Nothing against 44k,, i love it and think it will be even more effective in combination with this method! I may be able to clean the injectors on a couple vehicles with just one can of 44k. The stuff is expensive but good.
@@chrishund3157 where can I get bg 44k from
I have to admit that was a pretty unique way of doing that...thank you for sharing
This is probably the best rig that I've seen for cleaning fuel injectors
Thanks, i have many fuel injector leaning videos
Very helpful and easy to understand. Good job and God bless you more
Thanks, god bless you too
Damn this is actually super smart, good video man
Thanks Sav
Awesome bro thanks for your time and expertise!🙏🏻
Thanks for watching
Cool idea. I believe the first burst is more or less trapped air. Then after a few purges it turns to full mist. Personally I like to run seafoam in my gas from time to time great lubricator and cleaner. But I would use this technique if there were a fully clogged injector, where you take the rail out and apply voltage. Over all cool video.
Yes, this is deceptive. The frame he chose for the "after" photo is deceptive too. You can clearly see 2 streams most of the time when he's actually spraying.
What a simple and well made video...Thanks.
Glad you liked it
I have no doudt that this would work, but I was still amazed when I did it to a Chevrolet Sonic petrol engine, Thanks for the money saving DIY Bro💯💯💯Legit
Try B12 Chemtool. Pour in half a tank of gas and run car till your gas light comes on. B 12 will clean just about anything. Mechanics back in the day had an overnight dip can of it. They use to call it a miracle in a can.
Can you use this for the intake valves? Have a newer engine thats direct injected
@@Mario_Lopez34 If you're asking about B12 Chemtool. It will clean most of anything in regards to the fuel system. Marvel Mystery Oil added to the engine oil is a great addition as well. Just add the Marvel Mystery Oil a few days before your oil change. If you're having a serious problem I recommend adding B12 Chemtool to a 1/4 a tank of gas and run that down until the gas light comes on. Do that a couple of times If that does not correct it, you need to probably take it to a reputable mechanic.
@@Mario_Lopez34 the fuel doesn't touch the intake valves in direct injection, so putting B12 in the tank wouldn't clean them
Love it ,thanks 🍺🍺🌷🍂👍
Thanks for watching 🙏🏻🙏🏻
Best cleaning Injector videos I have seen yet on YT! Well done!
Thanks 👍
Wow… please more content of capable people like you!!! Big compliment!!! A hundered likes for you!
Hola, mi pregunta es si el limpiador que usas funciona con motores a gasolina o también con los motores diésel ? Muy buen video, gracias.
gracias, solo motores de gasolina
Simplest tutorial. This is what KZhead was made for!
Thanks for watching
marvelous video my friend, everyone loves it, myself included! I truly appreciate all your attention to detail with tour camera skills and all the honest work you put into this, sharing your talent and clever alternatives simply for the sake of sharing knowledge with your fellow wo/man. overall, it is a generously informative gesture complemented woth the pleasure of watching tour sincere artistry as you inform all who seek. Outstanding work my friend. Brava👏👏👏 Goddess Bless🌀✨💫🌟
Simple, no lots of bla bla bla just straight to the point. Subd and shared :D. thank you
I wish I'd have seen this a week ago, before installing back my injectors. Next time. :)
Its ok, next time
Brilliant. I've just finished doing the exact procedure with the exact product to my WJ Jeep. It feels better already. But engine exhaust blew blue smoke for abot an hour. Is that bad?
It means that you hand oil or carbon build up on the piston, good thing is, most of it burned now
check your oil level obviously, but as he said it might just be carbon if your level is still fine
brilliant! I've only seen this done with a (more) expensive kit.
I'm almost having withdrawals because he didn't say, "hey guys!". Best how to video I've seen.
So to the point, great job!
Thanks, always
Something everyone needs to know Preciate it cowboy
Agreed
Fooking genius! It actually works perfectly, ive noticed it on the fuel efficiency
Absolute gold sir, Thank you .
Very welcome
Have you seen the spray pattern from a new injector? I would be curious to see the comparison of a new one to these cleaned ones. I am not sure if it is atomizing correctly is why I ask..
I have new ones too, I was curious to see the cleaned pattern as well, they are same as the one I cleaned
WOW, just brilliant! i did the cleaning the old way the last time. next time you're saving me hours of work. thanks.
Thanks for watching 🙏🏻🙏🏻
What's the old way?
This is the old way, cleaning out of the engine kzhead.info/sun/Zq5wk9V6hXZ_jKc/bejne.html
My man 😎 thanks for saving me up 100€ that were meant for cleaning of injectors, now i can get a quality engine oil 👍
Glad I could help
That was the best I'll take it everywhere I go
If only all KZhead videos were this easy and straight forward , the world wouldn't be so ignorant 🙄
Agreed brother, I don't like to waste time, I always go straight to the poin
I made it ...it work in my car bro😍😍😍💪💪 keep gone
Awesome, thanks for your feedback
Great video! Could this cause a CEL to come on or damage the cat converter?
Awesome. Short, sweet and to the point.
Glad you liked it!
Excellent bro, keep them coming.
Thanks 🙏🏻
simple and effective. thanks
Thanks, Glad it helped
Thank you for making this video - that information will help me one day.
Nice! Direct to the point.
You should probably mention that this will not work with direct injection engines and most new cars are direct injection.
Maybe you should
Good video, is there way to connect aerosol carb cleaner to the pressure release valve instead of fuel line? Thanks Richard
I haven't try it, because not most cars has release valve, you will need the valve connector so you can connect it with the straw
Bravissimo sei un protezionista!
Thank you, nicely done video and great information to know.
Glad it was helpful!
And when engine shakes and quits I will start opening each injector with the battery without removing them.. should work as well
👍🏻A+ once again. Thk u!
Thanks 🙏🏻
Excelente tips para limpiar los inyectores
I use the fuel pressure gauge port to introduce the cleaner into fuel rail /injectors using piece of hose having threaded connector. I fill the system with cleaner - let it soak a while - disable fuel pump - run engine using pressure from cleaner can. Soaking really helps a lot. Also.. I've jogged stuck fuel pumps loose by pressurizing fuel lines at fuel gauge port.
Have you done this in any large v8 or bigger engines? Not sure how big the small amount of flow could handle and I don’t think they’re meant to be run like that as regular maintenance procedure. Would appreciate your input. Nice video btw!