KZhead
Автокөліктер мен көлік құралдары

Cleaning o2 sensor without removing it/Cleaning oxygen sensor with carb cleaner/TOYOTA Camry 2017

AliMECH
2021 ж. 11 Сәу.
3 809 588 Рет қаралды
Жүктеу

#alimech #toyota #camry
In todays video i will show how to Cleaning o2 sensor without removing it( toyota camry oxygen sensor location) and also if you can remove it which will be easy for most cars but not all of them, this method is for these cars, thats not easy to remove theo2 sensor so im going to show Cleaning o2 sensor without removing it, both of them will be cleaned with carb cleaner
Oxygen sensor cleaning with carb cleaner is the fastest way to remove that black layer so it reads accurate reading and have better fuel economy
i will be working on this TOYOTA Camry 2017 and i will do both methods Cleaning o2 sensor without removing it and Cleaning oxygen sensor with carb cleaner out of the engine
and show the before and after picture as well
Carb and Choke Cleaner: amzn.to/3vTjQA2
Intake valve Cleaning: • How to clean intake va...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : facebook.com/ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер

  • Great tutorial. Simple and to the point. You just saved many car owners a lot of money! THANK YOU!

    @wilsonrawlin8547@wilsonrawlin85472 жыл бұрын

    • Thanks, glad it was helpful

      @AliMECH@AliMECH2 жыл бұрын

    • Duracell optimum

      @FranciscoRamos-ur1ih@FranciscoRamos-ur1ih2 жыл бұрын

    • @@FranciscoRamos-ur1ih bruh those are batteries

      @stevengonzalez4512@stevengonzalez45122 жыл бұрын

    • @@AliMECH 0

      @JoelinthJoelinthBalia@JoelinthJoelinthBalia2 жыл бұрын

    • Kralsin Ali

      @turkerberber5038@turkerberber5038 Жыл бұрын

  • This was the first KZhead video I've ever watched from Iraq. Thumbs up.

    @dricklorenz9340@dricklorenz93402 жыл бұрын

    • Me too 😀 I'm from Iraq too 😂😂😂

      @user-iw8bl2gb9u@user-iw8bl2gb9u22 күн бұрын

    • I'm from iraq too, but in spain now

      @AliMECH@AliMECH22 күн бұрын

    • @@AliMECH thank you, I respect you too!

      @user-iw8bl2gb9u@user-iw8bl2gb9u22 күн бұрын

  • You are brilliant! I performed your procedure on my 2017 Chevrolet Colorado Duramax 4-cylinder diesel engine to fix my Nox sensor deciphered to not be functioning. The dealership wanted to charge me $750 to replace it, but using your exact technique cost me only $11.00 for the spray! Thank you, so much! You saved me a lot of money! My "Check Engine" light is now off after three months. I disconnected the batter after spraying the carb/choke cleaner spray into my master break cylinder's vacuum hose to reset my ECU and when I reconnected the battery and restarted my engine, the "Check Engine" light did not come back on! Bravo, my friend! It worked!

    @youchris67@youchris678 ай бұрын

    • That's great news, glad it helped you and saved you some cash ✌️

      @AliMECH@AliMECH8 ай бұрын

    • ​​@@AliMECHI'm pulling a p420 code low cat efficiency do you think this will work to get my engine light to go away? I have a 2012 Honda Civic LX and I wanted to clean the oxygen sensor but I'm afraid to take it out and break it I don't know if it'll clear the code because it's the sensor or it'll clean the cat enough to erase the code. I used cataclean last time and it turned the engine light off this time it didn't work

      @krakenhits1587@krakenhits15875 ай бұрын

  • My Friend, your videos are so self explanatory and educational, so thank you. Should the intake manifold be cleaned before cleaning the O2 sensor, or is it sufficient to spray the intake manifold vacuum line like you did in this video?

    @rehameric2819@rehameric28192 жыл бұрын

  • Hi Ali. Cleaning o2 sensor was a success. I followed each and every of your steps and it was so easy. Before cleaning, I was getting 14-17 mpg and the computer showed 300 miles to empty. After cleaning, I filled full tank of gas and now the computer showed 448 mile to empty. I'm getting 27 mpg average. However, there is minor problem. I was receiving check engine light and the display instrument showed "Check Vehicle Stability Control System". I ended up disconnecting the battery positive terminal for a couple of minutes and the check engine light went away. I hope it stayed away and won't come back on. Thank you so much for your instruction. You saved me a ton of money when I can do it by myself. Have an awesome day my friend :)

    @kevinh573@kevinh5732 жыл бұрын

    • 1 month later is this still the case @Kevin

      @JCWorkouts@JCWorkouts2 жыл бұрын

    • hello. im planning to do this to my camry as well. did you remove the o2 sensor or spray it through the vacuum hose?

      @kabankachan@kabankachan Жыл бұрын

    • @@kabankachan Remove it

      @kevinh573@kevinh573 Жыл бұрын

    • I don't believe that...cleaning 02's basically only cleans the outside and is going to be for a short period. sounds like another internet myth, especially believing an additional 10 MPG.

      @thedbcooperforum@thedbcooperforum Жыл бұрын

    • @@thedbcooperforum I'm sure Kiana cleaned the O2 sensor. I'm sure in Kiana's before/after got more mpg after cleaning. But like you, I question how the fuel economy was "tested". To have a difference of 10mpg, I highly doubt it was the same sections of road or driven the same way.

      @reallifeengineer7214@reallifeengineer7214 Жыл бұрын

  • Great video. A little bit of anti-seize on the threads is also a good idea with O2 sensors.

    @rickshonsite2435@rickshonsite2435 Жыл бұрын

  • Good, clear complete and concise instructions. You should definitely do a lot of these videos. Thank you very much.

    @thomashammett6851@thomashammett68512 жыл бұрын

    • Thanks, will do!

      @AliMECH@AliMECH2 жыл бұрын

  • I love your tricks Ali.... Thanks for another great video

    @arash1979@arash19793 жыл бұрын

    • Thanks Arach 🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

  • My 2015 Camry SE had 16 mpg , after doing this I get 21-27 miles per gallon , like new thanks alot !!!!!

    @stevengonzalez4512@stevengonzalez45122 жыл бұрын

    • Do you clean both sensor? Or only one? Thanks

      @victorgalarza9296@victorgalarza9296 Жыл бұрын

  • Chris Fix, Ratchets & Wrenches, Scotty Kilmer and now subscribed here! Amazing hack videos, Ali.. keep em coming brah..

    @abdulhassan1107@abdulhassan11073 жыл бұрын

    • Thanks brother, appreciate that

      @AliMECH@AliMECH3 жыл бұрын

  • A great video!! I’ve learned something! You presented the information clearly and didn’t waste time. Thank You.

    @kerrygibbs8198@kerrygibbs81983 жыл бұрын

    • Yea always straight to the point, thanks

      @AliMECH@AliMECH3 жыл бұрын

  • I am a woman. I do the repairs on my own vehicle (bmw). I watched several of your videos. VERY informative. thank you.

    @meinegeheim2801@meinegeheim28013 жыл бұрын

    • You are welcome, thanks for your feedback

      @AliMECH@AliMECH3 жыл бұрын

    • We're u from how mechanically inclined are you

      @juancontre5858@juancontre58583 жыл бұрын

  • Brilliant video simply and accurate information THANK YOU

    @peterswanepoel2807@peterswanepoel28072 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • I have a 2006 Camry with 2AZFE engine. This video was so simple I will definitely do it! It seems to run fine but it seems like a good idea to clean the injectors and valves and sensor due to age, and also I know it gets short-tripped a lot.

    @craigiefconcert6493@craigiefconcert64932 жыл бұрын

    • Thanks for watching 🙏🏻🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

    • You should clean it your engine will run much smoother with less shaking

      @ThexXxXxOLOxXxXx@ThexXxXxOLOxXxXx2 жыл бұрын

  • Excellent presentation and valuable information. Thank you.

    @doncourtreporter@doncourtreporter2 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • I just bought a 04 Crown Vic w/300k miles. Thank you I will be doing this

    @richardcrow6465@richardcrow6465 Жыл бұрын

  • Great ans simple idea for getting rid of carbon. Thank you Ali.

    @azzamhaq9556@azzamhaq9556 Жыл бұрын

  • AliMech great video !! Ill be doing this over the weekend.

    @lord8two212@lord8two2122 жыл бұрын

    • Awesome,

      @AliMECH@AliMECH2 жыл бұрын

  • This might clean your oxygen censor but it will harm your catalytic convertor. I destroyed my catalytic converter when I sprayed a can carburetor cleaner down the carburetor . I was trying to clean my carb in place with out taking it off. A lesson learned the hard way. DTB

    @dalebarella5908@dalebarella5908 Жыл бұрын

    • Perhaps, may have a more modern sensitive motor, getting worst....

      @wildboar7473@wildboar74732 ай бұрын

    • Who said spray it down the carb?

      @ejo4454@ejo445422 күн бұрын

  • this is something I can do it myself, basic, simple to do. Thank you

    @kack7130@kack71303 жыл бұрын

    • You welcome 🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

    • Dont waste time and carb cleaner ,go after real problem,scan it frist.

      @aliabouyeh8017@aliabouyeh80172 жыл бұрын

  • Good morning and greetings from Europe ..I have a 2006 Honda Accord with 426tkm on it..I did it yesterday and nothing happened ..today I erased the error code and the check engine light didn't come on anymore ☺️☺️☺️thank you man 💪💪💪💪 Now I will try the injectors also 🙌🙌🙌

    @villujurioo9320@villujurioo93202 ай бұрын

  • Done cleaning with your easy method bro! New sub here from PH..

    @ejaydc8198@ejaydc81982 жыл бұрын

    • Thanks for your support, 🙏🏻🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

  • Great work! Put a little anti-seize on the threads since you have it out.

    @gfysyoutube@gfysyoutube Жыл бұрын

  • Nicely done by a real professional.. Thank You..

    @fastek1kazz49@fastek1kazz497 ай бұрын

    • Thanks for watching!

      @AliMECH@AliMECH7 ай бұрын

  • Found something. Did i missed something here? Wow! great. Zillions thanks guy. Brilliant knowledgement. 😍😍

    @user-tw1wu8zl4m@user-tw1wu8zl4m2 жыл бұрын

    • Thanks Muhammad, glad it was helpful

      @AliMECH@AliMECH2 жыл бұрын

  • Great explanation, Thank you!

    @ironman1518.@ironman1518.2 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • Good video. Also, you may want to do a check with your OBD computer to check a before and after cleaning the oxygen sensor.

    @ja01975@ja01975 Жыл бұрын

  • That's the air/fuel sensor good to clean it though, good video

    @rafatorres1420rt@rafatorres1420rt2 жыл бұрын

  • Good tips, I clean both O2 and MAF sensor will definitely give you a better fuel ratio and mileage.

    @zepp3lin@zepp3lin Жыл бұрын

    • Great point!

      @AliMECH@AliMECH Жыл бұрын

  • The old carb cleaner spray, we used to spray that stuff into carburetor air intake every month in the 1950s thru 1970s. Modern fuel injection engines will have to do the way in this video. 😎

    @johnchen9930@johnchen9930 Жыл бұрын

  • Very useful and practical. Thanks, bro...

    @obhenx@obhenx3 жыл бұрын

    • You are welcome, thanks

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH grasias amigo

      @JesusGonzalez-oq3ot@JesusGonzalez-oq3ot2 жыл бұрын

  • Thank you, so simple tutorial. Loved it !!!

    @dongngo7792@dongngo77926 ай бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH6 ай бұрын

  • Thank you very much the video is great keep up the good work..simple and to a point no bs.

    @rolandubaldo3965@rolandubaldo39658 ай бұрын

    • Glad it helped

      @AliMECH@AliMECH8 ай бұрын

  • Yes this video learned me a thing or 3. NICE!

    @brothandg@brothandg2 жыл бұрын

    • Glad it was helpful

      @AliMECH@AliMECH2 жыл бұрын

  • Thank you for video.witnessing with out BEFORE there is no AFTER .great job!

    @mikesahle1193@mikesahle11932 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

    • 🙏❤️👍U R Welcome

      @mikesahle1193@mikesahle11932 жыл бұрын

    • 🙏🏻🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

  • Thank you. You are a lifesaver.😃

    @glenncordova4027@glenncordova4027 Жыл бұрын

  • I love your channel scribe upload more videos thank u for this information 💖

    @dholfactory5878@dholfactory58783 жыл бұрын

    • Thanks, appreciate your feedback

      @AliMECH@AliMECH3 жыл бұрын

  • Quality video! Excellent camera views !

    @lucasdesouza9674@lucasdesouza96742 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

    • Wrong wrench used. There is a special one designed for that job.

      @koldenkoodies2897@koldenkoodies28972 жыл бұрын

  • Thankyou very much , it work for my camry v6, all the best to you

    @lehuynh7998@lehuynh79982 жыл бұрын

    • Thanks for your feedback

      @AliMECH@AliMECH2 жыл бұрын

  • Neat trick. This shade-tree mechanic has just learned something useful. :-)

    @abcde_fz@abcde_fz2 жыл бұрын

    • Good to hear!

      @AliMECH@AliMECH2 жыл бұрын

  • I learned something new, thanks.

    @germanhernandez3718@germanhernandez37182 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • really good quality videos and information, can this method work on VW & Audi FSI engines to clean the carbon on the intake valves? I have seen people take out the intake manifold and rotate the cranckshaft to close the intake valves and clean the ports manually one by one, they say it is hard and use a lot of cleaners and zip ties in a an electric drill to remove the carbon from the intake valves.

    @osamamaddani@osamamaddani3 жыл бұрын

    • Thanks, I have a video, I cleaned it without taking it out kzhead.info/sun/n86KnNmfgn9vg2g/bejne.html this will be helpful for you

      @AliMECH@AliMECH3 жыл бұрын

    • Run seafoam through the main vac line

      @StaxxxCmd@StaxxxCmd2 жыл бұрын

    • Direct injection cars do not have any cleaning of the intake. Thus a coating will build up unless some gas is sprayed on occasion. Toyota does this VW Audi and BMW do not. One spray will not clean it it needs continuous multiple spraying or as you said and thorough cleaning with brushes or walnut shell blast..

      @danc2014@danc2014 Жыл бұрын

  • Master of COMMON SENSE 🤗🤗👌

    @srinivaskumarreddy120@srinivaskumarreddy1202 жыл бұрын

    • Thanks 🙏🏻🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

  • Thanks for using your time to show this video, helpful information

    @vilisoniloloyasi5054@vilisoniloloyasi50544 ай бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH4 ай бұрын

  • Thanks for your guide. If I use Carb cleaner to clean injectors directly as one of your videos, is air fuel ratio sensor clean too or not?

    @mducng@mducng3 жыл бұрын

    • It will but not that much, if it's too dirty

      @AliMECH@AliMECH3 жыл бұрын

    • Afr is the same as o2

      @quinnydanny2060@quinnydanny20602 жыл бұрын

  • Thank you!!!

    @lildragon3645@lildragon36453 жыл бұрын

    • You're welcome!

      @AliMECH@AliMECH3 жыл бұрын

  • ChrisFix Style, well a good done video brother! thumbs up!

    @juniantori9244@juniantori92442 жыл бұрын

  • Thanks again man awesome video I Will hit the bell icon

    @abrahim2644@abrahim26443 жыл бұрын

    • Thanks for your support

      @AliMECH@AliMECH3 жыл бұрын

  • A+ once again, Thk u! 👍🏻

    @ar15gator@ar15gator3 жыл бұрын

    • Glad you liked it ✌

      @AliMECH@AliMECH3 жыл бұрын

  • 1. you should not use a regular wrench. use an Ox Sensor removal tool OR a flare nut wrench OR a box wrench slipped down over the disconnected wire. once you rounded off the nut part of the Ox Sensor you are in BIG trouble. 2. you have to make sure the carb cleaner says on the can "SENSOR SAFE" or says Throttle Body cleaner. Plain carb cleaner can kill your Ox Sensors

    @meTimetraveler@meTimetraveler Жыл бұрын

  • Welldone Ali, excellent work, clear and straight forward.

    @samirarafat7491@samirarafat74912 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • Doing some work on my car, will try to add this to the agenda. Thank you. Different car, but maybe I can figure out which one to spray into. Have to find someone to hold gas pedal down while spraying, I guess

    @steveluera2109@steveluera2109 Жыл бұрын

  • I put mine in ultrasonic cleaner and that seems to clean them the best

    @Nissan370_z@Nissan370_z2 жыл бұрын

  • Very good instructional video. Several thousand miles ago my 2003 Camry (currently has 152,000 on it) was displaying a chk. eng. light. Took it to auto zone & the diagnostic scanner indicated a faulty 0xy sensor. Best I remember they had a special tool they loaned me for changing it out. Does there have to be a problem somewhere else in the engine like a bad injector etc. to cause a sensor to mal-function?

    @georgealdridge9453@georgealdridge94533 жыл бұрын

    • Thanks, whenever the o2 sensor gets dirty, there must be some problems, could be clogged fuel injectors, bad spark plugs or ignition coils

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH catalytic converter?

      @sueapollonio3000@sueapollonio3000 Жыл бұрын

  • Awesome job. Learned a valuable tip.

    @anthonyrodriguez-fo4lz@anthonyrodriguez-fo4lz2 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • A million Thanks 👍👍👍

    @emmy0076@emmy00762 жыл бұрын

  • Clear, concise explanation. All I would add would be to coat the O2 sensor threads with never-seize.

    @steverandall5814@steverandall58142 жыл бұрын

  • It is a great video. But I am thinking if you can clean the O2 sensor like that, the catalytic converter should be cleaned as well right? So I don’t have to remove the o2 sensor and spray directly to the catalytic converter.

    @leejimmy3401@leejimmy3401 Жыл бұрын

  • Enjoyed this video. Where did you find the log red spray tube?

    @user-hc7zf4xw5z@user-hc7zf4xw5z6 ай бұрын

  • Nice job mate,thank you

    @zgabeartzaiftodie8615@zgabeartzaiftodie86153 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH3 жыл бұрын

  • Beautiful 💓❣️ Art of mechanical engineering

    @rashidminhasbhatti9618@rashidminhasbhatti96182 жыл бұрын

    • Thanks man

      @AliMECH@AliMECH2 жыл бұрын

  • Use copper anti seize on threads

    @hotrodray6802@hotrodray68023 жыл бұрын

    • Why not aluminum ?

      @ibberman@ibberman2 жыл бұрын

    • It all would burn off no?

      @jregamey@jregamey2 жыл бұрын

    • @@jregamey OK, I'll get copper then.

      @ibberman@ibberman2 жыл бұрын

  • what type of camera did you use to film this? excellent video quality

    @raiderman28@raiderman28 Жыл бұрын

  • Good job very smart and thank you 👍👍👍👍👍

    @mokhlisshakker9937@mokhlisshakker99372 жыл бұрын

  • I have a 2014 same engine 2ARFE with 165k miles I think I should clean my o2 sensor and this will also clean intake valves you said right? It looks pretty easy to do I might do it myself. Thanks

    @chbobby8382@chbobby83823 жыл бұрын

    • Yes, you should, and you will definitely feel the deference

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH I have 2011 Corolla LE I want to clean my O2 sensor where is the vacuum line in my Corolla, is it same place as Camry you shoes in video or is it somewhere else.

      @jaleesxyz@jaleesxyz3 жыл бұрын

    • @@jaleesxyz it should be on the intake side right before your manifold. Look for a connection after the air intake filter.

      @punktalley@punktalley2 жыл бұрын

  • That oxygen sensor, according to the image, indicates that the mixture is too rich in fuel. Cleaning the sensor does not correct the problem. The check engine warning light only indicates that the emission level of the engine is not correct and that the lambda factor is not being met. On the other hand, zirconium dioxide, the main component of most oxygen sensors, degrades over time. Cleaning the outside of the sensor will only allow, in the best of cases, more gases to enter to react with the ceramic that performs the measurement (zirconium dioxide covered by a metallic layer). In short, if the check engine light comes on and the oxygen sensor is not degraded by use over time the problem is probably in the injection system. If the sensor has a long time of use or miles, change it.

    @ihrtecnomecanica9420@ihrtecnomecanica94202 жыл бұрын

    • Yes that's right, I had one failed fuel injector, after I cleaner all the injectors, I wanted to speed up the process for cleaning all the O2 sensors, that's right, O2 sensor not getting dirty unless there is some serious problem

      @AliMECH@AliMECH2 жыл бұрын

    • what is the symptom of o2 sensor has degraded by use overtime?? please help coz my car has a high gas millage

      @Abdullah-hc1cz@Abdullah-hc1cz2 жыл бұрын

    • ​@@Abdullah-hc1cz The best way to tell if an oxygen sensor is out of use is by using an oscilloscope. Excessive consumption (up to 15%) can be a sign that the sensor is not working as it should and it is not possible to adjust the fuel consumption to the stoichiometric ratio (14.7 parts of air / 1 part of gasoline). However, excess consumption may be due to other factors that indirectly affect the signal sent by the oxygen sensor to the engine control unit, which is what regulates the duration and quantity of fuel injected to try to achieve perfect combustion (stoichiometric ratio): - worn spark plugs. - permanently open thermostat of the cooling system. - faulty engine temperature sensor. - Faulty injectors (diesel) or injection solenoid valves (gasoline). - defective catalytic converter

      @ihrtecnomecanica9420@ihrtecnomecanica94202 жыл бұрын

    • @@ihrtecnomecanica9420 Hey, thanks for the information. Quick question, is it reliable to use a Lambda sensor on a two stroke engine? They sell them but I fear the sensor won’t last too long and I will have to be replacing it very often, at the moment I’m using an EGT sensor but it’s a bit vague, It’s almost impossible to know whether the engine is tuned to perfection, Exhaust gas temperature can go from 650 degrees to easily 690 or even 700 and the engine is still performing fine, so maybe a Lambda would be more accurate, of course if the sensor lasts long enough to make it worth while. Thanks 🙏

      @p.c.h.6721@p.c.h.67212 жыл бұрын

    • ​@@p.c.h.6721 Surely perfect for carb tuning, but I don't think an oxygen sensor while running a two-stroke engine will provide very reliable values. The exhaust gas flow in these engines is slow and pulsating, which will produce erroneous readings. Additionally, combustion in a two-stroke engine is less efficient (the exhaust gas contains a variable amount of unburned oil and gasoline in each cycle), which can also lead to misregistrations and sensor contamination. It is also true that the records of an EGT sensor can vary significantly based on heat, humidity and air density, but in two-stroke karts, for example, the EGT is the most widely used.

      @ihrtecnomecanica9420@ihrtecnomecanica94202 жыл бұрын

  • Hi thanks for sharing this video that was great 👍.

    @rafaelbernard9819@rafaelbernard98192 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • hi brother; very helpful video. i liked it. Hafiz from Canada

    @hafiz0890@hafiz08909 ай бұрын

    • Glad you liked it

      @AliMECH@AliMECH9 ай бұрын

  • Another great video ✌️✌️👍👍👍

    @darinjaff2473@darinjaff24733 жыл бұрын

    • Thanks Darin 🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

  • Brotha can I do this on my 3.0 d4d diesel Hilux? It's always good to do preventative maintenance right. 👍🏽

    @rayc1503@rayc15033 жыл бұрын

    • Not a good idea to do that with diesel engines, I recommend to remove it and clean it outside the engine

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH thanks, Eid Kareem brotha 🤲🏼

      @rayc1503@rayc15033 жыл бұрын

    • Meant to say Ramadan Kareem brotha, I guess I'm just looking forward to Eid ;) Allah Hafiz 🤲🏼

      @rayc1503@rayc15033 жыл бұрын

    • I got ur message, thanks brother

      @AliMECH@AliMECH3 жыл бұрын

  • Thanks Ali.

    @wheelhouseadventures8176@wheelhouseadventures81762 жыл бұрын

  • just learned something new thanks !

    @MrTarkus007@MrTarkus007 Жыл бұрын

  • Always put anti-seize compound on the threads of any hot section part....!

    @johnniewells7480@johnniewells74802 жыл бұрын

  • That outer metal shield just protects the ceramic / working part of the sensor its not important that it is carboned that much

    @davebar2017@davebar20172 жыл бұрын

    • The condition of the outer shield is a strong indicator of the condition of the sensor under the shield. Is it really that difficult to figure out?

      @fluxcapacitor1621@fluxcapacitor16212 жыл бұрын

    • @@fluxcapacitor1621 The ceramic gets super heated and cleans itself more likely it needs a new sensor us ASE master techs do mot clean them

      @davebar2017@davebar20172 жыл бұрын

  • Good video I was wondering if I could just spray the carb cleaner in to the intake manifold as I don't know how to find a vacuum line on my Volvo V70

    @paulgilraine3127@paulgilraine31272 жыл бұрын

  • OMG. I tried this as I could Not pass SMOG Test and was Getting O2 Sensor code tho a new O2 sensor. It WORKED!!!! Thank You!! I passed

    @VOILAMethod@VOILAMethod Жыл бұрын

    • Thats great, Glad it helped

      @AliMECH@AliMECH Жыл бұрын

    • So you replaced the oxygen sensor with a new one

      @ERod28@ERod2810 ай бұрын

  • If an engine has direct injection, the intake valves can get very Carboned up. This process would be good to perform periodically..

    @jonhutchens9770@jonhutchens97702 жыл бұрын

    • Yes exactly I did a video about it too, showed with proof that it clean the intake valves as well kzhead.info/sun/n86KnNmfgn9vg2g/bejne.html

      @AliMECH@AliMECH2 жыл бұрын

  • I saw your other video about cleaning catalytic converters in a similar method, but in this method in this video would the spray cleaner also partially clean the catalytic converter? Also thank you for the videos, I love that you show us how to do things in an easier way :)

    @Tadders@Tadders2 жыл бұрын

    • Run high octane and xylene take off vacuum from EGR so it stays closed. And run it like you stole it.

      @jregamey@jregamey2 жыл бұрын

    • @@jregamey Great reply! - Is Xylene similar to Seafoam? - I ran Seafoam on old Civics by removing a line and pouring it slowly... lots of white smoke. In my 2007 Prius, I'm getting p0420 code on aftermarket cat (original was stolen), plus also interested in cleaning injectors (I use Marvel Mystery Oil here and there), and the O2 sensor was replaced like 2 years ago, Denso. Would 91 gas+Xylene help?

      @elydiaz1031@elydiaz1031 Жыл бұрын

    • @@jregamey Hi where can I find Xylene in Auto part store or Walmart or Lowe’s ??? 🤙

      @keepitsolidkeepitreal2877@keepitsolidkeepitreal2877 Жыл бұрын

  • This should work on all types of gasoline engines. Thx for sharing.

    @garyshirinian@garyshirinian3 жыл бұрын

    • Great suggestion! but i haven't tried it, i cant say anything about that

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH thx for replying. I have 2002 Honda Accord 6 cylinders. I might try some day.

      @garyshirinian@garyshirinian3 жыл бұрын

    • @@garyshirinian Give your feed back if you did, thanks

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH I will .

      @garyshirinian@garyshirinian3 жыл бұрын

  • Two thumbs up! Excellent video!

    @boatkid888@boatkid888 Жыл бұрын

    • Thank you! Cheers!

      @AliMECH@AliMECH Жыл бұрын

  • The threads of the O2 sensor should have anti-seize applied before reinstalling. Otherwise a good, useful video.

    @psdaengr911@psdaengr911 Жыл бұрын

  • could you also post your odometer reading? just curious :D

    @DustInTheAir@DustInTheAir3 жыл бұрын

    • @1:59 odometer read 32672. Cheers, love.

      @morganheberling@morganheberling Жыл бұрын

  • Good work mate,

    @StrongWood7@StrongWood78 ай бұрын

    • Thank you! Cheers!

      @AliMECH@AliMECH8 ай бұрын

  • Nice and very clear demonstrations...

    @joonesvlog7281@joonesvlog72812 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • On some cars you have to reset the ECU to delete the adaptations, otherwise it's going to take forever for the ECU to adjust the mixture.

    @SK1PP3R88@SK1PP3R88 Жыл бұрын

    • Right because if you want to get paid and act like it's fixed you need to shut it off right now because it's one of those codes that don't come on for a while so after you make your money you can take off running

      @leeatterberry1239@leeatterberry1239 Жыл бұрын

  • Good tip, but I understand you should apply anti-sieze

    @manuelmunoz1104@manuelmunoz11042 жыл бұрын

    • What is an anti-seize Sir ?

      @juliuslapus2177@juliuslapus2177 Жыл бұрын

  • Thank you Brother. I will try this.

    @waqarqadeer5217@waqarqadeer5217 Жыл бұрын

    • You are welcome brother

      @AliMECH@AliMECH Жыл бұрын

  • Very good video, thanks. I would only add that when removing an O2 sensor, I like to loosen it when the engine is still somewhat warm, so that it comes loose easier. When reinstalling it, I use anti-seize on the threads to make the next time easier.

    @tominmo8865@tominmo88653 ай бұрын

  • Carb cleaner will foul the 02 sensor-brakecleaner.without removing it as you remove it??

    @Watchout1010@Watchout10103 жыл бұрын

    • I tried acetone. Nothing else got wrecked (very diluted), not sure it had a problem anyway.

      @louf7178@louf71783 жыл бұрын

    • @@louf7178 carb cleaner is basically acetone unless you go with the Berryman's B12 stuff, then it's 50% toluene and like 30% acetone with a bunch of other stuff.

      @imzjustplayin@imzjustplayin2 жыл бұрын

  • Wouldn't hurt a thing to put some anti-seize copper on the O2 sensor threads before you thread it in, and tighten it. If you don't do this, the next time you need to remove it, might not be so easy!!

    @milojanis4901@milojanis4901 Жыл бұрын

  • Wow , thank you, you’re amazing

    @gergemall@gergemall2 жыл бұрын

    • Happy to help!

      @AliMECH@AliMECH2 жыл бұрын

  • great video !! you just earned a new follower !!

    @HectorPerez-tb8hn@HectorPerez-tb8hn2 жыл бұрын

    • Awesome, thank you!

      @AliMECH@AliMECH2 жыл бұрын

  • You forgot to mention USE Anti-Seize compound on threads so next time sensor comes out easy. Spark plugs too like Anti-Seize

    @rudypadilla9626@rudypadilla96262 жыл бұрын

    • Yes that's a good idea to use, but I never use them, and never had any problem

      @AliMECH@AliMECH2 жыл бұрын

    • Ya it isn't smart to not use anti seize and he will have problems cause you can even see the rust on the threads.

      @MrKoalatea@MrKoalatea2 жыл бұрын

    • @@MrKoalatea Yeah now that you mention it the rust will probably cause a headache in the future

      @ThexXxXxOLOxXxXx@ThexXxXxOLOxXxXx2 жыл бұрын

  • Damn, with an engine that clean and rust free 🥰, how in the heck did that O2 sensor get so dirty?

    @masterace1150@masterace11503 жыл бұрын

    • I have on clogged fuel injection, after cleaning it, I wanted to speed up the process for cleaning o2 sensor, even though, good fuel injection always clean the o2 sensor

      @AliMECH@AliMECH3 жыл бұрын

    • No, not a good idea, sometimes carb cleaner couses check engine light or mess up throttle if its electrical, that's why I spray it from pcv valve, it will enter carb cleaner after throttle

      @AliMECH@AliMECH2 жыл бұрын

    • @@AliMECH ⁶

      @mmark8394@mmark83942 жыл бұрын

  • Thank you for uploading

    @AhmedHassan-ed5ue@AhmedHassan-ed5ue Жыл бұрын

    • You're welcome

      @AliMECH@AliMECH Жыл бұрын

  • i AGREE WITH EVEERYONE ELSE - GREAT, INFORMATIVE VIDEO!! THANKS.

    @A.WebbAndFriends@A.WebbAndFriends Жыл бұрын

    • Thanks for watching!

      @AliMECH@AliMECH Жыл бұрын

  • Keep in mind that the heater element in the O2 Sensor is out and cleaning may do nothing at all.

    @CooperCarr@CooperCarr2 жыл бұрын

    • Emmmm.. Every sensor have function it self bro...

      @nikhaniff6511@nikhaniff65112 жыл бұрын

    • Check the codes causing the CEL to go on. Usually separate codes for the voltage on the o2 sensor and the heating circuit on it.

      @MrDarilon23@MrDarilon23 Жыл бұрын

  • Put ANTISEIZE LUBRICATION on those threads!

    @stevedeleon8775@stevedeleon87753 жыл бұрын

  • excellent video

    @pamparker4047@pamparker40478 ай бұрын

    • Thank you very much!

      @AliMECH@AliMECH8 ай бұрын

  • Great information, stay blessed

    @Basharatali-ow2fx@Basharatali-ow2fx Жыл бұрын

    • Thanks

      @AliMECH@AliMECH Жыл бұрын
KZhead