Windshield Wipers Are a SCAM! 3 Ways to Save $$$
A HUGE thank you to BetterHelp for sponsoring this video! Check out betterhelp.com/lrn2diy to learn more about this AMAZING resource!
Are Windshield Wipers a SCAM? In a lot of ways, they really are. But I’m going to show you how you can save loads of cash the next time you start seeing those dreaded streaks on your windshield.
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• Recharge Your Car's Air Conditioning (A/C) in 5 Minutes: • Recharge Your Car's Ai...
• The Hammer, Reinvented: • The Hammer, Reinvented.
• How Have I NEVER Noticed This Multi Tool Feature?: • How Have I NEVER Notic...
📦 PRODUCTS IN THIS VIDEO 📦
Click on the Idea List below to see everything I used in this video:
www.amazon.com/shop/lrn2diy/l...
• 28 inch Silicone Windshield Wiper Blades Refills, Adjustable Size of Universal Replacement Wiper Refill: geni.us/hkWf9P
• 4PC Rubber Wiper Blade Refill,Adjustable Universal Replacement Wiper Blade Refill: geni.us/Ju8dRS
• Nextzett Glass Sealant Coating - 6.8 oz - 20 Windshield Applications - 6 Months Water Repelling Protection: geni.us/eRnFzy
• Washer Fluid Tablets Glass Cleaner Concentrate: geni.us/d6g1up
• Microfiber Cleaning Cloth,12 Pack: geni.us/B2JiT
• Rain-X: geni.us/EaHXwmR
• WD-40 Original Formula: geni.us/SprZB48
• Invisible Glass 91163 15-Ounce Cleaner for Auto and Home for a Streak-Free Shine: geni.us/p3UwlH
• Zep Streak-Free Glass Cleaner 32 oz: geni.us/TPJb
• Sprayway Ammonia-Free Glass Cleaner: geni.us/aUny10
• WD-40 Specialist Silicone Lubricant: geni.us/C3pEh
• Perfect.Cut Universal Windshield Wiper Repair Kit I Windshield Wiper Cutter: geni.us/wYqW
• DIY Windshield Wiper Blade Repair Tool, Universal Car Wiper Blade Cutter Trimmer: geni.us/wgc80Z
• Wiper Sharpener, Car Windshield Wiper Regroover: geni.us/w39OoO
• Windshield Wiper Regroover I Auto Windshield Wiper Cutter: geni.us/PP2f
Any link here may be an affiliate link, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
A HUGE thank you to BetterHelp for sponsoring this video! Check out betterhelp.com/lrn2diy to learn more about this AMAZING resource!
Are you too many too the product you’re pitching?! Only your wife & kid need help a couple times over a few years?! LMFAO get real!
Promising giveaways for subscriptions is a bad strategy. You want people to subscribe for the content, not for perks.
Ironically you advertise a scam.
These people are scammers who do not honor their own privacy policies.
I wanted to make you ware that is not a good Idea to promote Better Help there not agood compay and anti consumer practices
I have spent over 40 years in wiper development, testing, and sales/marketing... so my comments are based on engineering and laboratory testing, not limited cases observed on a driveway or local roads... First, never use petroleum based products on the rubber. This includes WD-40. Initial results may be good, but the petroleum eats away at the rubber and reduces the life of the rubber. Use alcohol or water based cleaners on the rubber. You are spot-on regarding the squeegee slicers. The rubber inserts are molded or extruded face-to-face and go through a "slitter" that costs tens of thousands of dollars. This is the most critical part of wiper manufacture and a hand-held shaver will never produce a perfect product. It will produce profits in the seller's bank account. If there is one scam in the video, it is windshield wiper pellets. They do not contain methanol to prevent freezing and usually contain less washing agents than the gallon bottle. Some pellets do provide a blue coloring (with minimum washing agents) that makes you think you have comparable washer fluid. Only $4 a gallon is cheap insurance against frozen reservoirs or damaging washer pumps. You will never see an automotive manufacturer recommend Rain-X, Aquapel, or Nextzeet because they would not take on the liability for possible dangerous vision while driving. These water repellants work by filling in the microscopic pitting found on every windsheet and they provide a slick surface... as well as a layer of foreign material. The repellant can cause tremendous glare , especially as it wears over time. This can be seen in sunrise, sunset, and oncoming bright headlights. The only place I would recommend one of these repellants is on sunroofs or windows that are not used to see through for safe driving. If you are using a repellant and your wipers are not working well, it may be because wipers are made to wipe glass and not Rain-X, which causes more friction. By the way... we clean our windshields in the labs with standard washer fluid (not tablets) and #0000 steel wool. Any coarser steel wool will scratch the glass. Use a swirling motion and virtually all substances come off. We could not get one water repellant off a test windshield... and had to scrap the windshield.
I think what some people mean when they say WD-40 for wiper blades is the silicone spray they make, which does work very well on wiper blades and anything else rubber such as weather seals. You just have to wipe off any excess or it can streak your glass up.
Wow - this is such good information from source who knows. I usually don't read a bunch of the comments, but I'm glad i did today. Thanks for commenting!
Thank you for very insightful info!
You are wrong about repellants. Best thing invented. Over 80 km/h no need to even turn on the wipers. And it reduces glare, specially on worn glass..
Very informative. I was just about to mention about RainX and wiper combo being bad. It looks fine initially but as it wears, It turned into an oily/waxy-looking white coat on a windshield, while causing the glare. And the Wipers were sounding horrible due to the rain repellent. I had to get it polished to get rid of the coat. After that, I decided to not put these repellents on the windshield. I agree that It is useful on Windows, mirrors and rear glass.
Back in the day, 1980’s and 90’s, you could simply buy the replacement rubber piece at the autopartes store, this was a cheap an effective solution, now the autopartes stores charge ridiculous amounts for the entire arm.
This is a gripe of mine as well.
Walmart carries wiper blade replacements that fit a lot of different vehicles. The cheapest variety are Michelin brand and they cost just under $8 per blade.
Yes, and the replacement arm is usually much lower quality than the OEM.
@@clay1883 I'm sure it is lower quality in every part. But for $8, if it lasts a year (and it does for me), I'm fine with it.
That is because of new insights. Or translated in, the auto-repair shop wants to steal some money from you, evidently I had this once too, now I go to another auto-repair shop, and only if it is absolutely necessary, they replace them. You should do the same.
Wiper refills were one common in every auto store and Walmart, but they slowly disappeared and were replaced with a range of wiper brands. People didn't used to buy entire new blades unless the old ones actually broke; they just bought refills. If there is a scam with wipers, it's that refills were taken out of stores, at least where I live. I'm glad that the video recommends them, as I didn't know where to find refills anymore and certainly would not have expected ones from AXpress to last more than a year.
This is exactly what I was going to say! I hate to newer blade refills. They are entirely too curved for a lot of the taller windshields. The middle of the blade never really hits the glass, and the ends wear out before the middle even hits fully. That can cause scratches and grooves in the windshield. Good to know that you can order the old school refills when you finally find a pair of blades that fit your actual windshield.
Two reasons for the demise of refills... First is the backing... it coulsd be 6mm, 6.5mm, 7mm, 8mm, or 9mm wide. Install the wrong size backing and the refill flies out during operation... or jam in one that's too tight and you can easily get streaks and smearing. Second... refills were popular when they were sold in pairs and were the same size. Today over 85% of vehicles have two different size refills on the front glass. If you are going to buy refills, go to the dealer... but if you are going to pay their ridiculous prices you may as well buy a quality aftermarket blade.
If you have the factory wipers, get refills from the parts department. They last 3 years 36k miles warranty, and they it perfect. Autoparts stores dont carry them no more as there is no single size anymore, its easier to carry the whole wiper at different lengths than different rubber at different widths and lengths.
Came here to say this. We used to by two rubber blades for 2.99 back in the 90's. Now you can't find them in any store.
@@noname-oe9jyI even got them for 99c a pair at flee market
Finally, a subject I have good (and I mean excellent knowledge about). I have been working as a development engineer for wiper system development at an OEM automotive manufacturer for almost 30 years. First of all: Yes, wiper blades are expensive, but they are safety equipment that you need when the driving conditions are at its worst. When it is cold, dark and rainy you don't want bad wipers, especially if you are driving for more than an hour. Take care about your self and your safety. About the 3 tips. 1. Yes, you should clean your wiper blades. But gently and absolutely not (!!!) with WD40. Use a piece of paper and some soapy water and wipe away the debris from the wiper lip. The black stuff is not tar, oil or soot and it should be on the blade. It is a graphite coating that helps the blade to move smoother over the windscreen but most important, it stops the squeaky noise from the rubber moving over the glass. The term "squeaky clean" comes from the sound a rubber scraper makes when cleaning a window... 2. Cutting the wiper lip. It's a thing you can do if you are broke and it is an emergency during daytime in the summer. There is a reason that the lip has its length and it is not so that you have some extra rubber to cut of. It is there to take up the uneven curvature of the glass and to make a smooth and silent wipe. You will especially notice this when it is in the 40-ies and below. 3. Exchange the wiper strip. Yes, that is actually a good tip abd that is what many OEMs do when the service your car. You can do it your self, but please know what you are doing. If the part is not already pre-cut to length, measure the old one and cut the new to spec. Better an 1/4" to short than an 1/8th too long. The rubber need to have room to move in the frame, when travelling over the windscreen surface. The two bonus tips. 1. Rain-X is good, very good. Just clean the glass thoroughly before applying. 2. You do not need any tablets from Amazon. Skip that crap. 1 tea spoon of (hand) 6:34 dishwasher soap to a gallon of water makes the best washer fluid. Have in mind though that when it is close to, or below freezing you must have ethanol in the washer fluid! A mix of 3 part water and one part ethanol (or isopropanol) will prevent the washer fluid from freezing down to ca 10 °F (or -12°C) 2 part water and 1 part ethanol will keep the washer fluid down to 0 °F (or -18 °C). Drive safely and don't be foolishly cheap! 😊
One trick that I have learned. Flip the blades, end to end if you can. It changes the way they lay. Sometimes the rubber is bent over a little from the pressure of being pushed down. Has worked for me. Ran a small full service gas station in the 80's. That's where I learned it and doing it even since.
Nice tip! Thanks
I'm going to get a little extravagant and suggest you spend a whole buck on distilled water to use with the washer fluid tablets. Where I live, the super hard water will eventually cause a problem in your windshield washer lines. I think it's worth a dollar to avoid it.
Same for radiator. My 1981 truck I bought new and still drive has no radiator problems. Also, oil your battery terminals and let some wick into the cables. Mine are original.
Definitely!!!Tap water Clogs up the spray nozzle's and spots the windshield.
@@sunlite9759 ummm don't you use windshield washer fluid? Its like $2 for 2 gallons where i live.
That seems entirely unlikely, but adjusting the pH of your spraying water down with a bit of vinegar can help.
I save the water from my portable AC. Its practically free distilled water
Something to be cautious of with those tablets: It says right on the Amazon page that it's only suitable for summer use. It has no anti-freeze properties, so you risk bursting the rubber lines and/or the tank itself if you are in an area with below freezing temperatures. Even straight Windex is subject this to this. I had a bottle of Windex in my outdoor covered parking area, and the bottle shattered. We live in northeast Georgia and I recorded temperatures down to 3F a few weeks ago.
yeah, found this out the hard way using the concentrate bottles though instead of tablets. Add some methanol to lower the freezing point. Get tablets not just for cost reasons - it's stupid to ship gallon jugs of water around the world.
A bit of isopropyl alcohol can lower the freezing point adequately for freezes. I have used ammonia, isopropyl, and water to make my own. It's cheap, and has worked for even subzero conditions. I have also looked for the possibility of the alcohol degrading components of the system and have seen nothing after several years. Recipes readily available online.
Holly molly I was just wondering that. Big misstep here. I thought being from Utah he would not make that mistake.
Think twice about using anything with ammoia, like Windex. I used it during a muddy spring, when I had run out of the normal fluid, and it worked great. But before it ran out, the wiper arm and the edge of my hood were both rusting. Ammonia is very good at cutting through wax or even some paints and some tiny scratches that would allow very slow rust growth from water or alcohol will allow rapid rusting if ammonia gets into them.
@@pcno2832yes corrodes metal and eats rubber
Silicone wiper blades only cost a little more than standard wipers, but last ~10x as long, they also imbue a similar effect as the nextzett. I've been using silicone wipers for over a decade, oldest set currently in use is 6 years old, and still working great,
What brand do you recommend?
@@DAjugRnaut Honestly I have to buy them so infrequently that I do some research every time
@@DAjugRnaut PIAA are the best
@@DAjugRnaut You can get very cheap silicon refiles that work really well, have them on my daily for 3+ years now. 4 pack (4 pairs) for $10 on average from U.S. or 8 pack from China for about $6. I got the Chinesium ones and they defiantly work better than any rubber wiper blade. But @tailsneon556 is right, the PIAA's are the best. Had some on a car back in the day and worked better than new after 7 years and 120K miles when i sold the car. I would clean them with PB blaster once a year. Not the best when you first put them on, but amazing wipers after they break in
silicone wipers really are indestructable
For cars with steeply sloped windshields, I found the same that you did. Using Rain-X (or similar), you don't need wipers above about 30 MPH. Wipers actually make it a little worse, because the water's already gone by the time the wiper reaches it. The droplets just race off the top of the windshield. It's a little distracting at first. Sort of like driving into snow. It also makes it much easier to remove ice and frost. Just give the ice a couple light taps to crack it and it shatters right off. Putting Rain-X on the wiper blade helps too.
I’ve also found using wiper blades with Rain X seems to make the Rain X not last as long.
Yes! A fresh coat of Rain-X and there’s no need for wipers. The less you use them the longer the Rain-X will last.
Also, just regular wax will work
I find only when the rain is heavy do I need the wipers. I don't think speed changes it. If anything, goinh faster will help with modern sloped windows
@@thepitpatrol for a MUCH lower amount of time. I've experimented, rainx can last months, wax, a few weeks.
I used to use Rain X washer fluid all the time and it worked great. Until a couple years ago when it started leaving a nasty residue. If I was driving into the sun, or at night oncoming headlights, left me completely blind, not seeing through the residue. It soon "evaporated", but it shouldn't have been there in the first place. I suspect Rain X "improved" their product. We all know what that means. I tried Rain X wiper blades and they left the same residue.
some years ago Rain-X changed their formula, which I can't recall what all was changed but basically they removed the silicone component that would leave the water repellent film on the window everyone liked. Now it's just colored water with some impurities in it like most other brands. You can get the same silicone residue on the window if you use silicone rubber wiper blades as opposed to the more common (and cheaper) plain rubber ones. I also find the silicone wiper blades last a lot longer, being more resistant to degradation from UV and ozone as well as more flexible in a wider temperature range. Worth the extra cost IMO
We have found of you clean the windshield very well and finish with distilled water and a clean microfiber cloth, it leaves no film. Sometimes you think it's clean, but some road films are very hard to remove. Wipe on the Rain-X with a clean white paper towel and after a wipe or 2 if the towel shows any discoloration, stop and clean the windshield again.
My 2016 Mercedes S550 was in for the B service. During that process I received a call from the service advisor to let me know that my blades needed replacing. Cost? Only $219. I thanked him and said no. Over my 58 years of driving I have learned that sometimes the blades just need a cleaning. When the blades wear down and cleaning isn’t effective anymore I would just buy new insert wipers, remove the old, and install the new into the wiper arms. Less than $20. Thanks to this video I found that I was doing the DIY thing before DIY was a thing and also I’ve learned new tricks. Thank you. Btw, I’m happy to now be a Patreon member. 🙋♂️👍
Can you imagine how many people say, "Yes" to that question? I'm sure it makes it worth asking the question...
i went to do an emissions test when i bought my first car and the guy looked at my wipers odd and said they looked old and that they should be changed, he just so happen to also sell wiper blades. thing is i had just bought the vehicle used earlier that month and changed the old wiper blades. i didn't see how much the was selling them for but something tells be it wasn't cheap.
A BMW dealer here in Ireland asked if I wanted them to replace the model-specific rear wiper blade during a service (14" long, and it was worn out) - I asked how much it would be? - They said €78 (~$85). I said no thanks, and bought a Bosch one locally for €14, and removed its rubber, and fitted it to the existing BMW blade assembly.
Maybe you have the magic vision wipers on your Mercedes?
Incredible how you usually can't buy wiper blades (the rubber inserts) anymore, but everyone stocks replacement ARMS. I had one enterprising station tell me I needed new arms. I said thanks, these were 20 years old and still worked fine, all I wanted were blades.
I am going to weigh in on this subject because it is one of my biggest pet peeves. It wasn’t that long ago that you could walk into any walmart or chain auto parts store and buy wiper blade refills cheap, I’m talking $1.99 for a set of refills at walmart. At that time you could buy a complete OEM quality Trico replacement blade for $4.99 and the best premium Silicone blades from companies like Rain-X or Bosch for under $10, now wiper refills are no longer available at retail stores and Rain-X Silicone are up around $25 each and Bosch OEM quality blades are around $35 a pair. As someone who spent years in retail auto parts I am extremely perceptive of changes in the auto parts market and can say without reservation that almost none of this is due to inflation; this like almost everything else in today’s economy is almost all the result of greed based market manipulation, for proof all you have to do is look at the record high profits corporations are reporting to their share holders. Companies across the board are now in the stock market business and their customer base is the expendable consumable used to reward their share holders………
I agree the the rise in prices has nothing to do with inflation. I have also seen my company raise prices on the highest selling items like batteries and wiper blades. First $10 then recently $5. Our pay hasn't increased at all so its not due to the increase in wages and with all the new products they send out it doesn't appear to be due to supply shortages. It's all just corporate greed to see how much profit they can get away with.
Totally agree! At first, I thought it was local availability, but I’ve moved around a lot and travel even more, and eventually I just never saw refills anymore. I’ve experimented with different types in different climates, and I’ve found you’re better off buying the cheapest ones unless you live in a more favorable climate that you can get more a year out of them. I remember we use to get much more life out of them than ANY now. I’m hyper sensitive to the quality of my windshield viewing, especially during rain, and I remember usually get 2-3 years out of most wipers until the last 10-15 years. Greed by just about any company these days is getting out of control.
I clean blades with rubbing alcohol every 1-2 months and then use a rubber protectant like 303 aerospace protectant(which I also use on tires, headlights/tail lights to stop fogging, and serpantine belts). Keeps blades going for years.
This right here!! Doing this you'll almost never need to change the blades
You dont need to put 303 on serpentine belts. It can actually cuases issues in some vehicles like slip....... On rubber hoses and plastics are fine in the engine bay.
Back in 2017 I bought real silicone wiper blade refills for my newish car and my wife's car that wasn't new, I had the old Triple Edge wiper blades back in the day, and they were silicone and spectacular. Hers streak a little these days (2024) but I haven't tried cleaning them, so I'll probably do that before swapping them. I sold my car and bought another in 2019, first blade change was to Silicone blade refills, and they still work fine. We do use the Rain X windshield washer fluid, that helps a ton and I never have Rain X the windshield for a re-coat, ever, the water just beads up and rolls right off.
I have the same large bottle of Rain X for about 30 years. I haven’t needed it except for after replacing a windshield. The key is I started using Rain X washer fluid which replenished the Rain X each time I use it. I’ve even used it without applying Rain X to the windshield and after a couple of weeks it’s working as if I did.
Where I'm from we can get new windshield wiper blades for less than $10. It really makes no sense to start trimming rubber or bother with replacing the rubber when you can replace the whole blade for the cost of a starbucks.
Thank you flr a simple clear and informative video. Ive had a personal issue with wipers for years. My local parts store charges up to 20 bucks for a single blade. A buddy was on rockauto and saw a clearance deal where he bought cases of the highest end bosch blades for 2.20 each (instead of 23.00), so ive been spoiled for a couple years.
Awesomesauce! Thank you so much for making this video. I have been telling people for so long how easy it is to take care of your blades. Now I must admit, at 50, I have gotten much lazier. I just purchase the Washer fluid with Rain-X already inside the bottle. After about 3/4 to 1 gallon of use, and my windshield is treated. Not only do I not have to run the wipers; but when I do, it doesn't wear down the blades as much if it isn't treated.
I just got school on wiper blades thanks so much for the great tips and advice
I must say, you put out some excellent content. I watch a lot of KZhead and most of what I see when it comes to topics in this space is very clickbait. Thank you for providing insightful and useful content. Keep it up man!
water freezes in the tank the tablets will need ethanol to keep your tank from bursting
There was a brand of wiper which I can’t recall the name but doesn’t matter. The rubber insert came with a little foil packet with an alcohol wipe in it. Wipe the contact edge and install. My wife had bought the whole unit from the dealer like 6 months before inspection and at inspection they told her she needed new ones because they were streaking. She was livid. I told her call them and tell them to clean them. She did. They did. It worked.
A couple of good tips there. I've been using the RainX windshield "spray version" for a few years now. After it's applied, you can actually drive in a good rainfall without the wipers on. The water just beads up and quickly flows off the windshield.
But if you DO use the wipers you get a darn fogging.
I have not had that experience though.@@francescocacudi1767
I would like to see you run the wipers on the Rain-X treated windshield. I tried the Rain-X once on my windshield, years ago. The water did bead up and tend to roll off, but at some speeds and/or rain conditions I still needed to run the wipers. When I did, it smeared and made it more difficult to see through. Eventually it seemed to wear off and I've never used it again.
An alternative to RainX that I’ve been using is ceramic coat detailer. Less than $20 at retailers, applies the same and works great.
I saw another KZhead video where they tested ceramic coatings vs RainX, and the RainX did noticeably better.
I use both and either works great when applied correctly
I have only one question.. Living in a cold climate and having summer/winter wiper fluid is common here, the difference is the amount of alcohol in the fluid. The alcohol is there both to help with quick evaporation and not freeze in winter. DO these tablets produce alcohol when reacting with water? If yes, then great. If no, then you're f-d in the winter when your wiper fluid freezes, maybe even expanding and damaging the washer fluid system. Something you should consider testing before recommending.
No, they don't do anything to lower the freezing point of water. I looked at this guy's link, and there isn't a single word about it changing the freezing point of water. So, it's not a substitute for your typical blue windshield washer fluid if you live where it freezes.
I used to work at Honda and our wiper inserts were so cheap and good that folks would change out their wipers to aftermarket once and then have to buy the oem wipers as a complete part so they could go back to just replacing the inserts lol. I definitely recommend it. Thanks for talking about the washer fluid tablets, I’ve wondered if they were any good. You earned my subscription, thanks for your help 👌
The system that I use (been doing it for decades) I saturate a clean paper towel with winshield washer fluid, then I use that towel and rub against the wiper rubber. Removes an amazing amount of dirt. Ju st be sure no alcohol is used because that will cause the rubber to dry out. For the winshield, I use Prolong Waterless Car Wash. I apply it to the winshield then buff it with a soft turkish towel.
I bought a 10 pack of silicone refills some 4 years ago for $20 on eBay and replaced the blades on my wipers and friends and family's cars. Still work great on my daily car. I clean the blades with just a paper towel and water whenever i see a streak every few months. *Chicago daily driver Long->Short; Silicone wipers FTW
RARE vid that is ACTUALLY HELPFUL. SUBSCRIBED. THANK YOU !!
Thanks for the tip on the Nextzett! That stuff is incredible
I replace my blades every year with the $6 Michelin jobs from Walmart. Easy, cheap.
When you go to your local franchise auto parts store, ask for the economy generic replacement blades they have in back. The ones they sell to repair shops are 1/2 the price of what the name brands one cost in the store aisles.
Guys never use WD40 on rubber or glass it will eat both over time. Use silicone spray on a cloth to clean the blades
Don't use ANY type of oil that contacts the glass windshield.
Surprise! Surprise! When I first started driving about everybody replaced the blade of the wiper instead of the whole wiper. Then the auto shops gradually quit selling the blades separately so they could make more money. I tried replacing my blades with ones I already had and they wouldn't fit my wipers. With all the problems we are supposed to be having with excess trash, it should be a nobrainer to go back to the old ways.
Thanks for the tips. I remember the old replacement rubber inserts and used to use them. But I still have the original wiper blades on my vehicle after 5 years. I clean them periodically with 91% isopropyl alcohol. They are starting to fray a bit, so I will likely replace the inserts soon now that I know where to find them again. I have not bought washer fluid for 15 years. The dealership that changes my oil (for about what it would cost to do it myself) tops it up for free. I doubt the tablets provide resistance to freezing.
I'm still running my OEM original from. Factory wiper blades on my 2016 Focus RS. I'm a bit of a nuts about having a super clean glass on my cars, so thorough cleaning inside and outside (not that the inside matter for this) and also I always clean my wiper blades when I wash my car. So basically I agree with what you say/recommend here 😉
I have the same PIAA silicone wipers since 2018 here in Texas. Silicone wiper also makes your windshield rain repellant. Go pick up some Michelin silicone wiper sold at Wal-Mart. Those have lasted 3yrs on my other vehicles and shows no sign of failing.
Good informative video. As a Rain-X former user, I found a preferable way to keep the outside of the windows and windshield slick and clean. I use an automotive spray wax. Usually one of the popular known brands. I do this to my windows about three or four times a year after a wash job.
The WD-40 (silicone spray applied the same way works also) trick is excellent for quick short-term emergencies (and extends the life of the blades) and usually last about a month or so. I like silicone wiper blades, they cost a bit more but they try to make them hard to find and they last at least 3 times longer. I'm not sure since I haven't had to replace them yet. Also, as others have mentioned car wax or polish like Nu-Finish applied and buffed off the windshield works as well and last longer than Rain-X.
When I first read this title I was like... whaaat? Cmon. Scoffed at it. Then I was silent, listened and learned. You shut me up sir lol. Thanks. Definitely subscribed. Love all the options in this video. I do door dash, uber eats, uber and lyft so, even though I have a newer car, I'm deeefinitely implementing these tips.
When I was a kid we would travel from the Midwest to the East Coast for summer vacations. I swear that I remember my grandad getting wiper blade refills / rubber blade replacement on the way there and on the way back - he was big on automotive safety when we travelled. I didn't think you could really do that anymore.
If you get a good set of silicone wiper blades you may never have to replace them if you clean them occasionally & wipe them with Rain-X when you apply that to your windshield.
The blades I buy usually break because they froze in thick ice. The plastic parts crack and the rubber tears to shreds. Would silicone do better ?
@jeffbguarino Yes silicone stays pliable in freezing temps. I would make sure they aren't frozen to the windshield. Start your car & run the defroster on high to free up the blades before you run the wipers. Or you CNN chip them out with a good scraper.
I love the idea of the window washer fluid tablets, not just for the savings but to have them easily on the go. My big concern would be freezing (I'm in Utah too), and in looking at the reviews of the ones you linked to, it looks like freezing is an issue with those tablets. Reviews in similar products mention adding 'de-icer or methanol'. Worth looking into which `de-icer` options exist and how to properly blend. Regardless, thanks for the info. I enjoy your videos. I thought I was saving big by getting my full wiper replacements cheap on RockAuto, but I think I'll go the blade refill route now! Thanks!
Forget blade trimmers just clean the windshield and wipers. I have been doing it for years. I use rubbing alcohol on toilet paper or paper towels. When the wiper stops making the white black it's clean.
Years ago when I had a Mazda 626, I had bought some Triple Edge wipers. They were amazing but they weren’t the standard blades. They were made with Jamak silicon. I had them on the car for almost 6 years and they wiped the same as the day I bought them without doing anything to them. Ice? Didn’t hurt them. Mud? Nope, still wiped clean. Sure after a couple years I had to wait for a few swipes that were streaky but after that they wiped clean again. It was weird but I can honestly say they were the absolute best wiper blades I’ve ever had. I only replaced them cause the passenger side flew off the car when the mounting bracket retainer clip broke. Happened while driving and using them. I have done the WD-40 method and can concur that it does work. As far as the Rain-X I never used it by my parents did when it came out. I do however use a paste wax on my windows and it lasts a long time with similar results. I have subscribed for more as I love to do things myself. A whole lot cheaper and I know it’s done right.
I had no idea wiper refills were still available out there! That was THE way to save on wiper maintenance when I was kid (they were sold right alongside the entire wiper). Also cleaning the wipers and glass reduces friction. It is the friction between the two that really wears down (and pulls apart) the blade. I've heard that wiping the blades with liquid silicone is better than WD40.
Hey Neils, nice tips! yet, here is another one for you: if you use a good car wax (carnauba-based specially} on your windshield it will also do a hell of a good job repelling water.
This!!
...another GREAT video! Thanks for this. Good luck with your quest for subscribers. I've been a subscriber for several years, and I've never been sorry.
Good advise another thing I will add is if you live in a cold climate where you get ice and snow when you start your car in the morning even if it's a light layer of ice scrape it off and spray de icer before you run the blades, best to wait till it's melted, I've had my set of AVA silicone wiper blades for 5 years now and still have no streaks.
Back in the day the parts store used to carry wiper refills. It was rare to replace the whole wiper. Now that seems to have reversed.
I don't know if my phone was listening to me or not but your video came just in time because I've been needing a way to not have horrible wipers and ways to keep the windshield clean. My astigmatism has been getting worse combined with dirty glass and glasses to make it sometimes impossible to drive at night. Hopefully this helps a bunch, I might not update but thanks!
I use isopropyl alcohol 90% or higher and a paper towel or clean rag to clean the rubber. It basically strips off the oxidation. Then I coat the rubber with a good rubber/vinyl protectant, like Armor All, and let it set for a few minutes to soak in. Then wipe it off. If you do this once or twice a year, the blades will last one or two more years. Start doing this right away, and don't wait until the rubber is damaged, although I've had good results even with older ones.
My silicone wiper blades are 14 years old, still working fine.
Chris is da man and has the best videos cuz they are short and too the point and not dragged out like this.
The replacement refill have been around since at least I was a kid and I am in my mid 60s. It was the only anyone fixed used by anyone back then. Usually still available in our Canadian auto stores (been a couple years since I bought any) for a couple bucks.
I bought the tablets at one point for the washer fluid but had ALL kinds of freezing issues with cold temperatures including in the actual supply line. Have you had this problem?
I watched alot of his videos, it's really an undervalued channel. A gem in the rough
Years ago I used to drive an old car that the wipers just didn't work so I almost always had rain-x. in the car. On the few occasions that I didn't have any and I got caught in a heavy rain I would pull into a car wash and blast the windshield with the hot wax till time ran out. It wasn't the best fix, but it was enough to be able to see to get the car home.
Chemical Guys Hydro View is a glass cleaner with repellant. Lasts a lot longer than rain X, about $20 but it also cleans. I can do many car washings and still have the water bead on my window glass. I also use it on the shower glass, mirrors, house windows, picture glass, tv screen and cell phone. Not affiliated with CG, just love this glass cleaner/repellant. There are others such as Adams and Ethos you can try also.
Been using rainX for many many years, I can't imagine driving without it. Now using the screen wash made by them that applies new layer every time I use it
Everyone talking about refills. They went away for the most part because one, there were three different widths of refills, second, modern vehicles as a majority, use two different size blades. So costs would be redundant. Plus the new design beams are really hard to replce incerts into. UV does the most damage, those of you who store your vehicles inside or dont drive htem full time, they last much longer.
Yeah, they can solve ALL of these issues by STANDARDIZATION. We only need ONE SIZE for each type of car. Every truck does not NEED different sizes of wipers. The windshields are almost identical. And if the windshields are not identical, MAKE THEM IDENTICAL. We need cheaper windshield repair too! #LateStageCapitalism
5 years ago I bought silicone wipers and haven’t had to replace them. I clean them every once in a while and are just perfect.
So then nextzett stuff isn't available anymore. What's a good alternative?
I've been using Rainex from the time it first came available. I've been doing wiper refills for 12 years on my wife's Honda. The original blades lasted almost 4 years. I did a refill with non-OEM blades and had to replace them is less than 2 years. Installed non-OEM , but not the same manufacturer as the other non-OEM. I got about 2 years use. The next refills were OEM and they lasted over 3 years. I only buy and replace with OEM blade refills now.
Thank you for taking your time to make this video very helpful
rock auto continuously has sales on wipers ( regular $3.00 - $30.00 ). If you catch a closeout sale you can get stuff for a buck. and use distilled/filtered water for the tablets as tap water in some areas has lots of minerals and will clog the small passage of a sprayer.
I have been cleaning my blades for years. I am in Southern California and use the wipers every day to clean the windshield. I get two to three times more life before replacing with refills.
Re: Nextzett lasting longer than Rain-X: I've been using Rain-X on my Honda Civic (with wiper refills!) for a few years now. I applied the Rain-X as instructed, but I also switched to using the Rain-X washer fluid. After over 6 months, I was still getting very good water shedding (in pretty rainy/snowy upstate-NY weather). I re-applied the Rain-X, not because I felt I needed to, but because it just seemed like a good idea (it was late-fall, I still had plenty left in the original bottle, and I didn't want to wish I'd applied it later in the winter). I'd tried Rain-X a few years previously (without the washer fluid), and it didn't last nearly as long, so it seems like the washer fluid is effectively replenishing/refreshing it whenever I use the washer. I wonder if the Rain-X washer fluid would have the same effect on Nextzett. But in any case, if you use the Rain-X washer fluid, a Rain-X application lasts a really long time. -Tom
For years, I just add a few drops of dawn in the tank, it cleans all the film great. Notice I said a few drops, adding to much will have suds all over the window.
Great video! Thanks for sharing these! Those tablets are awesome. The question is, can I add them to anit-freeze washer fluid? I live in Canada.
I use the ceramic polymer that I use on my car finish on the glass as well. You never have to turn the wipers on, it just sheds off the glass.
Ceramic? Ceramic is stone. I don't want rocks anywhere near my vehicle. That's like rubbing it with ground spark plugs.
I use 20/20 all season windshield cleaner to keep the road film off my windshield. By keeping the glass clean i have been using the same blades for the last 5 years and I live in the Pacific Northwest where we use or wipers for like 9 months of year 😁
Making your own washer fluid from those tablets and tap water makes no sense for people living or driving in climates where it freezes. In freezing weather, tap water will freeze, clog the washer fluid lines and likely damage your washer fluid pump. Washer fluid needs to contain isopropyl alcohol or similar.
So just add some isopropyl alcohol with the water to lower the freezing point
@@sociopathmercenary The major solvent in WW fluid is usually ethanol (close to 50%) with some some isopropyl alcohol and sometimes other additives as anti-freeze.
Does adding the alkaseltzer like tablets prevent your water from freezing in the winter like traditional non freeze windshield cleaner?
Not at all. I have no idea why the creator of this video mentioned them. He lives in Utah, where it freezes. He should have known better.
I’ve been buying pretty much only trico here the past few years.tried the rain x silcone ones also!
I experience engineered obsolescence with my wiper blades. Before the blade edge wears out the entire blade separates from the rubber portion that the frame holds onto. The connecting strip has become thinner over the years so it tears away faster.
This the silicone wipers?! I just got some from a recommend by the Autozone cashier, and they are impressing me. Hope they last. Was changing my normal rubber ones every 8 months or so.
Just discovered your channel - I'm hooked.
Fantastic video! Thanks for all of the tips!
I'd be cautious using WD-40 to clean your wiper blades. Maybe I didn't remove the residual WD-40 properly after cleaning, but after "cleaning", we went on a long road trip and encountered rain. I couldn't see a thing. The residual oils from the WD-40 smeared the windscreen. As I say, it may have been user error. If I do it again, I'll test it thoroughly before heading out on the road.
Definitely user error
Thirty years ago it didn't matter if you used the RainX Windshield coating or not as it simply did what it was supposed to. But I would advise not using it on your newer car with auto-wipers or especially lane keeping assist or any of the other fancy modern helper things. The coating will interfere with the sensors ability to detect things through the windshield and may keep it from working altogether. Also, all of the washer fluid I use is methanol based so it doesn't freeze. Those tablets don't make it methanol, you would have to add it to methanol.
You win a subscriber. I like very much the content. Best compliments from Portugal 🇵🇹
Cool informative video. Another product that has worked amazing for me. Is RAINX windshield washer antifreeze that's typically available at any BIG BOX store next to the blue windshield washer antifreeze is the yellow rainx windshield washer, antifreeze. Use it because our winters are very cold here with temperature, sometimes reaching -20°C. So rather than switching to the SUMMER bug washer fluid by RAINX as well, which I would likely forget by the time winter arrives, which would freeze the water bottle and pump like an ice cube, expanding and an ice cube tray. I just the winter -40°C rated rain X washer fluid, which basically coats it just like the additive that you demonstrated in your video. I to find that when I'm driving at high speeds, the water just repels off of my windshield which prolongs my wipers for typically five years or more because I don't use them as often but I do need to take care of them a little bit more as the age by cleaning them with a degreaser, and then using a rubber rejuvenator Solution with the applicator built into the little bottle, which I just apply a small amount, and it brings it back to like new by restoring the moisture that's lost as my daily driver throughout all four seasons of extreme weather conditions. They clean it up even better. Sometimes there is too much crap on it because I don't wash my vehicle enough. I'll just use a little piece of light sandpaper or Mr. clean magic eraser, which basically removes a small amount of material along with any other foreign debris which creates a smoother service area rather than buy new wiper blades. Find that when there is a huge downpour and I'm driving on the highway that my wipers don't keep up the pace needed in order to remove the water from my windshield because it's too slow so the RAINX actually be used as a safety measure if my wipers stop working or one flies off? I think I go through one bottle of washer fluid a year because of the rain helping to keep my windshield cleaner by repelling the water and dirt off my windshield when it does rain or snow. Another try to keep an extra blade in your trunk. Even though it's an old blade and may not do a great job. It's better than having no blade do no job or worse having the wiper arm cut into the glass of the windshield because the driver didn't pull over to address the situation, but rather drives home later, realizing is a very fine line in the shape of a moon on my windshield lol I wonder what that came from and that's when I showed them the wiper arm folded down on the windshield, matches up with the same mark left by running the wipers with one blade missing. OH "I didn't know it would leave a mark on the windshield"? it more than an eighth of an inch deep it's not worth buffing out the material around the scratch in order to level that area of the windshield which would take countless hours. Great video though keep up the great work! Peace
This is a good guide. But there are some things with the refills you need to be aware of that I've learned in 15 years of aftermarket and dealership parts departments. If a car is more than a couple years old chances are it has aftermarket wiper blades on it. In the aftermarket nearly every wiper blade has a different width of channel where the blade itself slides into. So you may get the right length, but that channel may be a couple millimeters too narrow or wide.
I second this. My '99 Blazer has one that I think is OEM and one that I know came off a Mini Cooper. The wipers are VERY different.
6mm and 8mm are popular. 6mm will usually work in the 8mm arm. Cut to length from bulk.
wow thats a cool tip bout the wiper fluid packets! i never knew that was a thing
Great video. I have not tried the trimmers, but I have suspected that wipers lose their square edges that give you the best clean. I started buying silicone refills on Amazon some years ago after paying way too much at the autoparts store for the cheapest blades. Nobody sells refills anymore in stores. I wish I could find a roll and cut them to length and not have all of the little pieces. I am so cheap that I run the pieces from the other cars on the passenger side of my truck.
10:33 I use a similar product that I discovered when I was living in Japan and it works exactly like that. All the major car shops like AutoBacs had it. It was in a bright orange hand grip applicator bottle that had the felt brush built into the bottle. The only downside to using that stuff on your windshield is driving for a couple of hours nonstop in the rain during the day will cause your brain to get that warp speed star field screen saver burned into your brain and when you finally get to your destination, you being seeing that moving star field for hours after. Even worse if you pullover into a rest stop for a nap. You close your eyes and that's all you'll see. It made my friend traveling with me get nauseous when they tried to catch a few zzz. 😅
You should always change lane to keep right, unless you're overtaking. If people overtake you on your right, then you're doing something wrong. Everywhere outside 'murica you'd get honked and brake checked if you'd continuously drive on the left lane without such need...
The biggest scam regarding wipers is dishonest mechanics. I’ve replaced my wiper blades just before bringing the car in for inspection renewal and then was told I needed new blades (which cost 3x what I paid to buy them myself) despite the fact I just replaced them the night before. Obviously I didn’t go back to those mechanics but it happened more than once.
Silicone lubricant is another thing you can use that will prevent the rubber in the blade from cracking and aging, you just have to make sure you don't get it on the glass and wipe off any excess or it will streak your windshield. You can also use it to lubricate the wiper arm and any moving parts to keep them from squeaking and prevent rusting.
I use full strength rubbing alcohol to clean the wipers and glass. A drop of Dawn in the alcohol for really clean glass.
Thank you for sharing this
Automotive waxes work pretty well compared to Rain-X. I use chemical guys Jett Seal and it lasts quite a long time.
❤ I know this may sound ridiculous to some but what I’ve been using for years to replace windshield wiper fluid is a teaspoon of Dawn dish liquid kind of like you said, put it in the Reservoir first then slowly add water this will prevent any suds, this stuff removes road grime like you wouldn’t believe I think it keeps my windshield wipers, clean as well. Just saying. 😅
It appears washer fluid prices have skyrocketed since I last bought it, $1.99 at Walmart. -30 degrees formula was $4.99.
What hasn't gone up in price! thanks Biden !!!
there is a graphite coating on the wiper blade rubber, so when cleaning it you also remove that protective layer
Si you are saying to never clean your wiper blades?
I'm a bit uneasy about tablets used with regular water. I wouldn't put regular water in the windscreen washing tank for fear of limestone and other contaminants deposits, especially on the narrower portions of the whole circuit: pump nozzles... Here where I live (Romania) I've seen bottle of "concentrated" washer fluid that you mix with distilled water... but to my knowledge, regular water is advised against in windscreen washer fluids mixture. Also... a little bit of bad experience I had some years ago... working on an automotive control unit that also had a driver for the washer pump, we had this test jig with the OEM's pump and reservoir assembly connected to some hoses and an acrylic tank in such a way that when activated, the pump would dump fluid into the tank and from there the fluid would drain because of gravity into the reservoir. So, during the first batches of tests, hurrying to get started, we just poured tap water into the reservoir and got on with our work. A couple of months later we managed to kill the pump and were curious why. Because of the limestone deposits that accumulated in the pump, it had to work harder, edging close to it's stall current. And this particular pump had quite a high stall current... so it proceeded to release the magic smoke sooner than we anticipated. We replaced the pump, drained the tap water and replaced it with distilled water (after rinsing everything thoroughly with distilled water) and continued our work. This time the pump only dies when we did other nasty things to it (short-circuits and stuff...).
I'm in Southern California. My wipers only get used a few times a year. Once the last rain has gone, my good blades come off and some old ones go on. Otherwise, the sun destroys them during the summer. Got tired of buying new wiper blades for a few rain events every year.
I clean my blades with alcohol swabs, the same ones in a medical offices. Two thumbs up. They are tiny but work great.