Learn Making EVA Foam Shoes in 5 Minutes
2020 ж. 2 Нау.
28 740 Рет қаралды
Learn a very simple way of how to make EVA Foam Shoes in just a few minutes
EVA foam used
1cm Foam
5mm Foam
2mm Foam
Bonding
Super Glue
CA=Contact Adhesive/Contact Cement
You can always replace the sanding part with just slicing off the foam carefully. The sanding machine only makes it easier.
Check out my other works at
/ leonnoelcos
Buy me a coffee at
ko-fi.com/leonnoelcos
You win! These are great Thanks for sharing the magic
Sangat bermanfaat.
Bro has the "YOROKOBE ZASSHU!" shoes
He need to make more video so I can learn more
Great tutorial! Hope you don’t mind me asking, which thickness of foam did you use to make the details on the shoe ?
I use 5mm
Great vid!! Do u know if the EVA material can be melted and reutilized?
I've never heard of it, so I'm not quite sure
@@LeonNoelCos Thx anyway
EVA Foam can be heat formed and re-shaped with limited results. I used my heat gun on a sheet of foam for too long and nearly burned my hands. Yeowch! You might want to try a hair dryer on regular heat, instead.
Also did this shoe last a day I meant. If I make one, can I walk around with it in anime NYC, will it fall apart? sorry for so much questions.
Yes definitely. As long as you don't over stretch it. The reason I use another thin layer of Eva to cover everything is to enhance the the shoes. Just wore it carefully, don't over stretch it, don't run with it, it will last whole day
@@LeonNoelCos Thank You!!!
But can the soles be stretched/folded near the toe area where it needs to move?
Eva foam is soft, it will break in with wear. That being said, these probably won't be very comfortable
It can, but not recommended. Especially normal spray paint cracks, unless it is vinyl wrapped or Plasti dip painted. But just as eve said, it won't be comfortable
How does it hold up when you wear it?
Had worn them to an small event recently and they are still intact
@@LeonNoelCos thanks for the info. I'm planning something similar and I need all the info I can get. Btw I must compliment you on your work. It was great!
which type of paint you use to paint shoes
i'm using automobile paint. not the best option because it cracks
Bisa menggunakan cat akrilik.
Hi if I want my shoe to be purple how do I color it?
Either acrylic, plastic dip, or any other painting method. Ideally acrylic or plastics dip, the rubberized painted will be better
can i make a sandal base with eva and the heels with cardboard?
Yes, indeed a lot of sandal and slipper are made of high density Eva foam. But I'm not so sure about heels
@@LeonNoelCos then i'll not risk it, but thanks
If i already have a shoe base with a heel, how would you suggest i attach my eva foam to the heel?
That will be a lot more easy, simply just wrapped over the base
@LeonNoelCos thank you so much for replying! I'll try that
Good luck!
What glue are you using
it is contact adhesive or contact cement
Lem G.
Do you cut at an angle?
Which part?
What do you mean when you say CA?
Contact adhesive. Some people call it contact cement
@@LeonNoelCos Nice Video. Maybe you could add that contact adhesive info in the description area under the video. It would save people from potential problems that want to use your directions. I think a lot of people are going to be confused and think you're telling them to use Cyanoacrylate "CA Glue."
@@thewhitemustang this is true! thanks for informing
如何自作牛角?
Ini digunakan oleh para cosplayer.
Where can I find EVA
I’m trying to find out the same thing
Di toko bangunan.
Bro my friends name is Eva
What a coincidence, now you can tell your friend I've made your friend shoes
Plastic warp? Don't you mean "Plastic Wrap"?
The plastic warp we usually used for sealing and wrapping the food to keep it fresh, or we usually use for wrapping parcel to keep it out of rain, water. That's what we call it here
Hhhhhhhhhh
Karya yang indah.