This is my first attempt at turning a true hollow vessel. I used some scrap walnut off cuts from the legs of my end table build. This was great fun and I plan to make more hallow vessel type pieces in the future. I got some new tools I am using in this video, I plan to go over all of these as well as the new finish I am using in a video soon. This may be the last time I use the urethane resin for a while, I want to go back and try the epoxy again now that I have had some experience with the urethane. Hoping to get a solid technique locked down so I can share some useful information. This was the closest I have come to having a mold fail in the pressure pot. I don't think I will try a diameter smaller than 7" with the polycarbonate sheet. All and all I am pretty happy with how this piece turned out. I really liked the black mixed in with the blue resin. I think the proportions are a little off in the finished piece, but I may just be too hard on myself. Will definitely be trying this one again down the road. Thank you very much for watching and I hope you have a great day!
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Simple hollowing system with laser kit
www.simplewoodturningtools.co...
Eye Candy pigments 👁️
bit.ly/48vZNLf
Coupon code:SquareandLevel
#resin #woodturning #woodworking
Music courtesy of epidemic sound
This is my first attempt at turning a true hollow vessel. I used some scrap walnut off cuts from the legs of my end table build. This was great fun and I plan to make more hallow vessel type pieces in the future. I got some new tools I am using in this video, I plan to go over all of these as well as the new finish I am using in a video soon. This may be the last time I use the urethane resin for a while, I want to go back and try the epoxy again now that I have had some experience with the urethane. Hoping to get a solid technique locked down so I can share some useful information. This was the closest I have come to having a mold fail in the pressure pot. I don't think I will try a diameter smaller than 7" with the polycarbonate sheet. All and all I am pretty happy with how this piece turned out. I really liked the black mixed in with the blue resin. I think the proportions are a little off in the finished piece, but I may just be too hard on myself. Will definitely be trying this one again down the road. Thank you very much for watching and I hope you have a great day!
"Maybe too hard on yourself"????🤔 I think that the colors looked great. And others do too!!!!! 😃
The blue you use compliments the wood, but as a redhead I'm partial to green.
Turned out absolutely beautiful. The colors really compliment the piece.👍👍👍
Great first attempt!! Can’t wait until you’re well seasoned! Absolutely beautiful!!
I love your creativity. I especially loved the bowl you made in a previous video
That is ABSOLUTELY GORGEOUS
Beautiful piece! Well done!!
The way the wood layout gives a beautiful spiral effect. Also, the spacing enhances that as well. Excellent in all ways! Looking forward to seeing future projects.
Very nice work. Those colors go great together. Well Done!!
Absolutely brilliant!
You are a talented and handsome gentleman. Blue is my favorite color. That vase is stunning.
Amazing work
Nicely done piece. I also have used A. slow cast for a long time. Have always turned urethan and never epoxy. I do get some major chipping with slow cast if to aggressive with my larger diameter carbides! Enjoy your videos, stay safe.
Magnificent cent. A lot of work well worth the results.
Beautiful work. May I say also very brave!! Turning this vase without a lathe steady was very courageous 😮
Beautiful piece
Beautiful vessel!! Thanks for sharing 👍🏾
Thanks for watching!👍🏻
Absolutely stunning!
Thank you so much!
Stunning!!!
Wow absolutely beautiful love the colors and the way it turned out. Great job
Thanks so much 😊
That is absolutely stunning mate. Nice one.👍
Thank you! Cheers!
Beautiful!!!!❤
Absolutely beautiful turn. It’s obvious you’re very meticulous with the entire process. The blue with that walnut contrasts beautifully. Fantastic work.
Thank you very much!
I think it’s great. I saw the thumbnail and had to watch the process. I really like the colors. Now I have to subscribe.
Thank you!
That's lovely !
Outstanding! Beautiful! Will done!!
Thank you kindly!
Looks awesome Scott! Love how they spiral out from the base. Your new laser thingy is sick!
Thank you Mr. Bones. The “laser thingy” was a good purchase. Glad I picked it up. Thanks for watching! Your next video almost done? I hope there are more amazing water color plan paintings.
Beautiful work.
Thank you! Cheers!
Dude, you are an Artist. I like your Designs and your Handwerk to get beautiful Forms from 2K mixes. Thanks from Germany.
Thank you very much!
Very nice. Lots of work.
Great job! Maybe I should try.
Beautiful Piece and interesting process. Full view and Like 👍
Thank you so much!
Love it! Great work
Thank you!
Excelente trabajo muy bonito 👏👏👏
Artista puro
Wow wow very nice
Very cool 😎
Another great turn. You need an art exhibit.❤
Thank you Mr Franklin. And as always, thanks for the kind, encouraging comments. Appreciate you always watching my videos.
Hi YES I LIKE IT A LOT...ITS A REALLY BEAUTIFUL LOOKING VESSEL.. DAVID N.S.W. AUSTRALIA...
Nice skills
Very nice! It would be interesting to see how a piece turns out if you torch the wood before adding epoxy.
Definitely something I will be trying in the future. It’s on my list for future video ideas. I’ve always really liked the way resin looks butted up to charred wood. I’ve made some pieces in the past using electricity to burn the wood and back filled it with resin. It is a very cool look. Thanks for watching! Hope you have a great day!
Beautiful you should be proud
A very elegant piece with the wood and resin shapes. I can’t wait to hear about your tools. I have a Jet midsize lathe and am wondering if there is a hollowing system I can use for deep pieces like this. I also noticed you using a buffing pad of some kind. That is also something that looks interesting to use for a smooth and perfect finish. I am enjoying your videos and hope you add some narration or subtitles down the road. Thank you
Thank you very much! I do plan on adding some narration In the near future. Possibly the next video. I struggle with it a fair amount and it makes the videos take significantly longer to make. We will see. I am also considering making a second channel. One for no talking and I’ll use this channel for talking. Still trying to figure this all out. Thanks for watching. Hope you have a great day!
Beautiful! Would love to know more about your finishing process, the shine you achieved was beautiful. Can you share?
Yes, soon.
This is stunning! Incredibly beautiful! That blue is mesmerizing! Do you sell your work?
Thank you so much. I’m sorry, but I do not sell any pieces at this time. Hope you have a great day!
Parabéns meu amigo vc trabalha muito bem serviço de qualidade muito bom meu nome é José Francisco Alves da Silva moro em João pessoa paraíba eu vejo seu trabalho
Oi ficou show meus parabéns
Хорошо, люблю токарные работы.
Beautiful work. What finish do you use?
I'd pay 100's for that piece. cheers
Great video-This gives me some ideas for table legs with walnut blades and epoxy. My coffee table legs are usually 17 inches starting out. What is the max height of that pressure pot? Thanks love the blues!
This pot has a max height of 12 inches. I ended up choosing this one because of its height too. It was pretty much the biggest one I could find before the price increased significantly ( think I paid $70 for it). Good luck with the table legs. Hope you have a great day!!
Very nice piece. I have used slow cast for a long time. Curious as to how you will compare it to epoxy for turning? Stay safe.
Thanks, will do!
🇧🇷🇧🇷🇧🇷 tamo junto gostei top demais 😃
Looks really nice, and yes, you are to hard on yourself.
What is the flexible clear plastic material you use to enclose your epoxy casting?
Another amazing piece! You sure got lucky when the secondary glue failed on your mold!! I notice the pieces of wood you used all had the same “twist” to them. Was that from the design of the table legs you got the cut offs from? Did you polish the inside? Or what did you do there? Your precision is inspiring and clearly a sign of the exacting craftsman you must be with “flat work.”
Those scrap pieces were exactly how they came off the end tables I made. Wasn’t really a twist to them, those were just the angles I made the table legs at. Definitely glad I didn’t fill my pressure pot with resin. That would have been a unfortunate mistake. Thanks for watching! I hope you have a great day!
What angles were the table legs cut at?
Wooooow
Great entertainment thanks
Glad you enjoyed it. Thanks for watching!
If it doesn't bother you, use the advice Place a “container” in the tank in which you will lower the product. The additional capacity will protect your main tank if the filling compound leaks. Otherwise, what leaks out will remain in the tank forever, and this is sad
The machine hum almost gave me a heart attack. My stove just caught on fire and then I heard the hum and thought it was the refrigerator. I honestly had no clue there was a difference between urethane resin and epoxy.
Wow!!!! May I ask how much the resin for this project cost? I am new and interested in resin turning, but a hobbyist turner.
I’m sorry I’m not sure of the dollar amount of resin in each piece. I buy the resin in larger quantities so it is a bit cheaper. 3 gallons of resin will usually make 3-4 pieces depending on the size.
Красиво! Профиль!
❤❤❤❤
👏🏻👏🏻👏🏻👏🏻👏🏻
👍👍👍
Magnifique pièce c’est presque dommage de salir un si beau mec et un si bel atelier avec les copeaux 😅
Anybody find a good source for thin polycarbonate?
you can easily remove the silicone if you sprey alcohol on it
0:05
It would have been much more helpful to have included some narration explaining what you did, i.e. obviously, you used some type of epoxy. The particulars would have be useful, type of epoxy, the color pigments, etc. Someone who is experienced can probably figure it out, but your video really doesn't help a novice.
Your designs are beautiful! I love the transparency of the resin, the colors and shapes, I wonder where i can find your pieces for sale?
I currently do not sell any of the pieces I make. This is my hobby and I give most things away to friends and family. I do plan on giving away some pieces to viewers of my channel in the future. Thanks for watching!