Fuel Injection cleaning in less THAN 5 MINUTE/HOW TO clean injection Directly without disassembling
#ALIMECH #injection #cleaning
carb choke cleaner: amzn.to/4bgWU2G
In this video, i will show you how to Clean the fuel injection in less than 5 minutes Directly without disassembling any injections, it will be direct injection cleaning by connecting carb cleaner can to injector rail, and staring up the engine BUT keep in mind to remove the fuel pump fuse or the fuel pump wire harness, because we don't need fuel pump to push gasoline, the fuel line is disconnected, carb cleaner can connected instead with an adapter
Cleaning fuel injectors individually: • Here is why your car b...
Using Autools kit for cleaning fuel injectors: • Used Rheinol injector ...
Half of carb cleaner can can give you best results, and if you of you do it with the whole can, even better
Tool box: s.click.aliexpress.com/e/_DE3...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
lets be friends
--------------------
/ alimech8
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Just use Sea Foam in the gas. No need to take anything apart. Works great in the fuel and oil.
My husband did that on our truck from your old videos and engine light turned off 💃, thanks Ali mech
That's awesome
Can this be done on Diesel?
@@realdevbro447belle question, pour les injecteurs du Diesel ce n'est pas possible. Ils faut des outils de précisions pour tarer les injecteurs. Et d'ailleurs les injecteurs du Diesel ne sortent pas ensembles sur une rampe.
@@ouellekouassifranck8219 rip a nos diesel
Amazing video. Simple, Short, Clear.
Glad you liked it!
That fuel pump was amazingly accessible! Most are not that easy to get to. I guess the other option would be to find the fuse for it and pull it...but honestly, pulling the rail and replacing them is not all that hard to do.
Thanks for this
Very nice thank you!
You are welcome 🙏
My question, where did you get the long plastic straw thats attached to the spray can nozzle ? The one that came with the bottle is like 3/4 smaller? Did you make it or bought it?
Great shot, thanks
Thanks for watching
Good tricks
Very easy and straight.
Thanks for watching
nice work!
Very good,❤❤❤❤❤
You think the 2014 ram 1500 fuel line fitting is the same size? Trying to figure out what size hose I need to fit it
❤❤good
What is the other fluid you showed at the end of the video "C100 kicked canister" something? Thanks
Wow nice. But what if the fuelpump not locate under the seat
carb cleaner ingridient is Thinner TLS, Aceton and aerosol right..?
Good idea!
This seems good for injector rails that are a pain to remove. 👍🏻🤙🏻
Definitely!
Top job!
Thanks!
Nice hemostats! Off to Amazon 😅😅
Can this method be used safely for a AUDI TFSI engine with damaging the high pressure fuel pump?
دەست خۆش
Supas
What type of PLIERS are those, they took the connectors off with ease.
GOOD VIDEO, MORE FOR THOSE WHO HAVE AUTOMOTIVE EXPERIENCE????
Yes exactly, not beginners
Thanks for the info, Ali. Will Seafoam or Gumout fuel tank additives work just as well? Of course, they're easier to use.
Sure they will, but it will take some time, I will make a video about that soon, how much it will clean
Good tip.Getting chemicals into the engine cylinders may cause damage to top piston ring .
Carb cleaner is petroleum-based. Gasoline is petroleum-based. Learn something! 😂
Aerostart wouldn't be selling on the market if that was true 😂
Sprays can cause detonation. Where the liquid or vapor ignites before the piston is at the top. I don't recommend this. Wait until you have a quarter tank......and put some Lucas in it. And drive it all within a few days so you don't get moisture accumulating along with the alcohol.mixture in the Lucas. Don't let Lucas sit in your tank. But it cleans injectors.
I used your method of removing the fuel injectors. Actually I got some spare ones and a fuel rail from the junkyard. Then I was able to pressurize the fuel rail with carb cleaner and I didn’t have to fit the hose to each injector. Can you do a video on using seafoam or water in a vacuum line to clean carbon? My car is 25 years old and I can see carbon on the pistons when I look through the spark plug holes, but I can’t tell how much there is.
I made so many video on my channel for removing carbon, here is one with seafoam kzhead.info/sun/p7OThq1vomSGg3A/bejne.html
Go to video for older cars by getting all that car cleaner into the combustion chamber is not a good thing , especially for your catalytic converter , but in video just some pros and cons like with everything with car system cleaning
I really need a good mechanic, where do you live? Seriously tho i really enjoy your videos
Hes in spain, I saw in his Instagram story 🤠
hmu..ill be happy to stop by and change your oil ;)
Can you do a video using seafoam in the gas tank with before and after pictures of the injectors, as you did here, to see if seafoam lives up to its reputation?
That's great idea, I will add it to my list
this guy cleaning his car like i cleaning my plain table surface
😅
Great video, will this work for diesel engines?
I would not do it...
Hi will this work on Hyundai accent 2012?
It should
would it not accumulate the carbs in the cylinder then??
No, it burns faster than fuel
When I pulled the fuel pump fuse on my 2018 Kia Sorento it won't start. Any ideas on how to get the car started so I can then spray the carb cleaner?
Disconnect the connector at the fuel pump, leave the fuse alone. Pay attention to the video, he explained why.
@soundsolutions yrs but what if the fuel pump is in the tank with no access.... proceedure is to drop entire tank or cut thru carpet and floor from top... unfortunately...so then what??
Can't you just extend the fuel hose and let the gas drain into a bucket?
What is that tool that you used to unclipp the connectors? Where is it sold?
Late reply , it's called a hemostat , similar to forceps , both used in the medical field and both also found in mechanics tool kits . They come in long , short , straight and bent variations .
cani try this with a diesel ?
No
This is half measure cleaning, because debris is clogging injectors from the injector fuel supply side.
Better replace them maybe?
Plug the end of that hose and use a small drill bit to pop a hole into it for the straw. Angle the hole towards the injector side.
wow using tongs to remove the connectors.... and here i just got a lisle plier for 30 dollars lol
Hey I have a 2021 with 36K miles do I need to clean my fuel injector, dealer keeps telling me I need to clean it.
If you have stady RPM the engine starts right away, mo shaking, you don't need cleaning
Wouldn't the fuel leak when you start your car with disconnected fuel line
This is why he disconnected the fuel pump... Though I wonder why not just pull the fuse?
@gordonhenderson1965 he mentioned some model cars run more than just fuel pump on that circuit. Pull the fuse if that's the case, you have cranking but no start.
Ah ok thanks
Will this work if you have a direct injection system?
علی کەی لۆ سەیارەی منیش خاوێن دەکەیەوە
Babemawa 😅
@@AliMECH amnt ga baw hatnawaye. Har nahatyawa😁😁
I thought you said it wouldn't run without the pump connected under the rear seat? but you started it? You pressurieze the line with the cleaner :)
Also you didn't say what size hose was the DIY ADAPTER :?)
Please don't spray cleaner on o rings 😅
That cleaner can’t be good for cats
Meow
just remove it ! carb will go to piston head and BUILD UP IN exhaust & cats 🥲🥲
Why gas not going there when engine running normally 😅
It's good when it enters combustion, it will clean carbon buildup on the pistons, this method will be used for cars where its hard to remove fuel injector, for some cars, the whole intake manifold has to be removed
@@AliMECH Nissan Murano is like that. Cylinders 1,3,5 require remove of air handler and entire intake. Swap testing can require reassembly and another disassembly. I just say screw it and do them all. This is a good trick to get you through a stop gap time though.
@@AliMECH I was just looking at my 5 litre V8 Windsor block Ford engine and considering parts required to remove the injectors. You've solved my problem with this fix... intake manifold is huge and covers most of top motor space.❤