Testing a heat gun as method for bending plexiglass
Пікірлер
Thanks!! I needed this video for a project. 👍🏾
@crownlaurus261018 күн бұрын
Nice and simple!
@timothyodell52452 жыл бұрын
What is the best material for TV screen protector Acrylic Or Polycarbonate
@eslam79022 жыл бұрын
I have the same heat gun, just bought it to replace another one. I use it to shape plexiglas. I've msde waterfalls and under gravel filters gor fish tanks, domed lenses for shop lights, a lighted console for my truck.
@claudebarnum77602 жыл бұрын
Gore fish tank, that metal...lol
@coreycoffell62195 ай бұрын
I'M NOT SURE HOW HOT THE ENGINE BAY GETS SO WHAT THICKNESS WOULD YOU RECOMEND?
@JUNEORJUNE6 жыл бұрын
What kind of gloves are you using?
@katiejoartsy15405 жыл бұрын
Thought about using plexi glass as a windshield for my 86 blazer how hard would it be?
@Knasty-xe1fx3 жыл бұрын
You can use it for a windshield for sure as long as you have a way to mount it down
@yoursurgerysister3 жыл бұрын
Hello Brothers, can I make a float glass band in the same way? Please answer
@AshrafAli-dq8gz3 жыл бұрын
Just search youtube. The key is to heat the glass evenly at the same time, otherwise it will likely crack. Also the temperature is much higher so you need professional gear.
@Kekafuch3 жыл бұрын
Brilliant
@brentsmith56472 жыл бұрын
Super 👍 Merci
@ALPHARICCO8753 жыл бұрын
My heat gun has attchments that can narrow the heat gun area to a more concentrated region, may help with tighter bends if no mould is available?
@Rothew12 жыл бұрын
I would recommend using a form if you can, you will get a more reproducible result
@toddlarsen62152 жыл бұрын
I have a piece that has a bend I want to unbend it to make it straight. Is that possible?
@waterpredators6890 Жыл бұрын
Given HOW the plastic bends (stretching one side and compressing the other), likely not with a nice smooth outcome.
@toddlarsen6215 Жыл бұрын
IS PLEXIGLASS HEAT TOLLORANCE?
@JUNEORJUNE6 жыл бұрын
JUNEORJUNE yes - no discernible change in color or translucency (other than caused by the flexing of the material)
@toddlarsen62156 жыл бұрын
Can a hair blower do the job as well?
@stephenportilla92442 жыл бұрын
I don't think hair blower would do it seems like an he is using industrial heat gun
@georgecarlinn62882 жыл бұрын
you need 160°C. a common hair blower won't make that
@siemensohm2 жыл бұрын
That's still not wide enough to worry about even heat across the bend. It might take a length of copper tube with that heat fed in.
@coreycoffell62195 ай бұрын
Hi, It will work with hair dryer?
@fadelfadel38992 жыл бұрын
I dont think a hair dryer will be hot enough.
@Rothew12 жыл бұрын
They really aren’t designed to get this hot. That isn’t an expensive heat gun (Harbor Freight) but note how much thicker it is then a regular hair dryer. Also, it get VERY hot after a bit.
@toddlarsen62152 жыл бұрын
That's a thick piece, around 3/16?
@ccccen6 жыл бұрын
Carl Zorro 3/16 or ⅛, can't remember and not sure where this scrap piece is, the other part is in a window
@toddlarsen62156 жыл бұрын
Is possible to bend 1/4" using that method?
@rossijohn14085 жыл бұрын
i want to make my own rocker panels for my car and thought of using plexi
@lancelotomegaalboin6 жыл бұрын
Lol good luck
@sew04ss6 жыл бұрын
Thanks want make bike windshield through this technique
@prashantbirje14195 жыл бұрын
Sorry about the film quality, I'll up it in further videos
@toddlarsen62157 жыл бұрын
Diy legend
@maxduke35052 жыл бұрын
1:36 , I thought there is sudden nature call, he left the heat gun turned on.
@aswingsharif67293 жыл бұрын
Yeah you should never leave a heat gun running like that
@maywalker99711 ай бұрын
Nice. Thx for sharing. The electricity bill must be frightening, if one work often with those guns...be well.
@radar5364 жыл бұрын
It would help if you added subtitles to your video as the hot air gun drowns out your voice.
@johnparkin58 Жыл бұрын
omg you are guru!
@freeshz963 жыл бұрын
Not very easy, & expensive in Bill electricity for a simple small job.
@wsalinas13 жыл бұрын
filmed with a potato and mied the heat gun
@jeffblahblah5226 Жыл бұрын
i want to bend plexiglass sheet for car window becuase homeless keep breaking my windows.
@janisrough58586 жыл бұрын
Janis Rough - it might be difficult unless you have the glass as a pattern. I would imagine you could bend a sheet of plexiglass the same width as the window directly on the window and then trace the borders. I just don't know if it would adhere to the glass at all. I suspect not, but it would be a disaster if it did.
@toddlarsen62156 жыл бұрын
Janis Rough I also wanna do it
@Creator_BD6 жыл бұрын
use lexan its stronger
@PlayingWithFireOutdoors6 жыл бұрын
Use lexan
@Youtubeforcedmetochangemyname5 жыл бұрын
Move...
@Phantomthecat5 жыл бұрын
Too bad we cant understand what your saying when your heat gun is on. Have to go to a different video i guess?
Thanks!! I needed this video for a project. 👍🏾
Nice and simple!
What is the best material for TV screen protector Acrylic Or Polycarbonate
I have the same heat gun, just bought it to replace another one. I use it to shape plexiglas. I've msde waterfalls and under gravel filters gor fish tanks, domed lenses for shop lights, a lighted console for my truck.
Gore fish tank, that metal...lol
I'M NOT SURE HOW HOT THE ENGINE BAY GETS SO WHAT THICKNESS WOULD YOU RECOMEND?
What kind of gloves are you using?
Thought about using plexi glass as a windshield for my 86 blazer how hard would it be?
You can use it for a windshield for sure as long as you have a way to mount it down
Hello Brothers, can I make a float glass band in the same way? Please answer
Just search youtube. The key is to heat the glass evenly at the same time, otherwise it will likely crack. Also the temperature is much higher so you need professional gear.
Brilliant
Super 👍 Merci
My heat gun has attchments that can narrow the heat gun area to a more concentrated region, may help with tighter bends if no mould is available?
I would recommend using a form if you can, you will get a more reproducible result
I have a piece that has a bend I want to unbend it to make it straight. Is that possible?
Given HOW the plastic bends (stretching one side and compressing the other), likely not with a nice smooth outcome.
IS PLEXIGLASS HEAT TOLLORANCE?
JUNEORJUNE yes - no discernible change in color or translucency (other than caused by the flexing of the material)
Can a hair blower do the job as well?
I don't think hair blower would do it seems like an he is using industrial heat gun
you need 160°C. a common hair blower won't make that
That's still not wide enough to worry about even heat across the bend. It might take a length of copper tube with that heat fed in.
Hi, It will work with hair dryer?
I dont think a hair dryer will be hot enough.
They really aren’t designed to get this hot. That isn’t an expensive heat gun (Harbor Freight) but note how much thicker it is then a regular hair dryer. Also, it get VERY hot after a bit.
That's a thick piece, around 3/16?
Carl Zorro 3/16 or ⅛, can't remember and not sure where this scrap piece is, the other part is in a window
Is possible to bend 1/4" using that method?
i want to make my own rocker panels for my car and thought of using plexi
Lol good luck
Thanks want make bike windshield through this technique
Sorry about the film quality, I'll up it in further videos
Diy legend
1:36 , I thought there is sudden nature call, he left the heat gun turned on.
Yeah you should never leave a heat gun running like that
Nice. Thx for sharing. The electricity bill must be frightening, if one work often with those guns...be well.
It would help if you added subtitles to your video as the hot air gun drowns out your voice.
omg you are guru!
Not very easy, & expensive in Bill electricity for a simple small job.
filmed with a potato and mied the heat gun
i want to bend plexiglass sheet for car window becuase homeless keep breaking my windows.
Janis Rough - it might be difficult unless you have the glass as a pattern. I would imagine you could bend a sheet of plexiglass the same width as the window directly on the window and then trace the borders. I just don't know if it would adhere to the glass at all. I suspect not, but it would be a disaster if it did.
Janis Rough I also wanna do it
use lexan its stronger
Use lexan
Move...
Too bad we cant understand what your saying when your heat gun is on. Have to go to a different video i guess?