Fully 3d printed 5ft long J10 cults3d.com/:1777499
Пікірлер
That was better than most of my controlled landings...
@oldman194419 күн бұрын
That's why I haven't used Deans in 20 years. As they age, they oxidize and resistance goes way up. They're also prone to just getting dirty. Don't use Deans. The plane looks good! It's very stable.
@stevec759619 күн бұрын
Reminder of Part 3 of the design smiggen lol just can't wait!
@Aerospace_Engineering_Noob19 күн бұрын
Haha it’s funny, I keep forgetting because I have to tie up my iPad for an hour straight keeping the screen from turning off while the huge files upload. I’ll try it. This morning 👍🏻
@hotlapkyle18 күн бұрын
@@hotlapkyle sweet! Thanks! Just got the Nx8 on order.
@Aerospace_Engineering_Noob18 күн бұрын
It landed so well for that it wasn't controlled. It works and flyes super nicely and for the hand launch maybe put those dimples in the bottom as you've done with other planes in the past? Cheers 👍💪✌
@rjung_ch18 күн бұрын
Amazingly it didn't tumble after the power outage. It's really just bonkers how it managed to stay "upright" with a slight glide for a soft enough touchdown. A90 is just big, one bad toss and it's toast. I'd still go after some type of gear, even if it's not retracts. Great video, awesome that it flies well. AirHammer out!!
@airhammer620319 күн бұрын
That is one gentle giant
@franks.jr.723619 күн бұрын
I started RC in the late 80s and I have never seen a plane lose power and RC control and land like better than you could have if you were actually trying to land it yourself! That was awesome plus that thing flies freaking great
@MrMagoo32119 күн бұрын
Haha thanks! I can say I pretty much nailed the CG!! 😂 and it’s got really nice flight characteristics if I don’t day so myself
@hotlapkyle19 күн бұрын
@@hotlapkyle yes indeed brother good job
@MrMagoo32119 күн бұрын
You were really lucky when you landed 🛬without any control......thumbs up👍👍
19 күн бұрын
Dude I love your vids. Good planes and good vibes👍👍😊
@shawnrinkel837719 күн бұрын
Make sure that the Canards are at least 1 or 2 degrees down. Neutral will fly but slight down angle on the canards will stabilize it like you won't believe and the CG will still be the same.
@jameslovell188718 күн бұрын
That landing? The pilot survived without injury. Wow!
@ColinChick18 күн бұрын
Haha right
@hotlapkyle18 күн бұрын
super stable! great job!!!
@divyajnana19 күн бұрын
That would be cool with retracts!
@Lopez_rc19 күн бұрын
XT90 for the 90mm edf with 10-12 gauges wire for the win..
@fpvlive19 күн бұрын
I have since switch from Dean to HXT 60 or 90. Dean goes high resistance over use. Lost my drone due to poor dean connectors.
@angelofmusic47719 күн бұрын
Just answered a question for me thank you.. . I bought a 90mm mirage second hand and the previous owner has used 10a house wiring between the EDF and the ESC. I was wondering if it would matter if those wires got a little hot 😅
@jaredstaniland911719 күн бұрын
Lucky break on the power loss situation. It looks like a fun plane. I need to print a couple parts for my J10 50 and give it another shot.
@tommcallister583519 күн бұрын
"its not gon crash. i mean it crashed" kyle hahaha man what an insane build
@VT-FPV19 күн бұрын
Haha!
@hotlapkyle19 күн бұрын
You need to make a DIY PVC pipe bungee launcher for your EDFs. I built one for 30 dollars that breaks down and fits into a small duffel bag or even a grocery bag. Plenty of Videos on KZhead or RC groups on how to make one step by step all from homedepot or Lowes parts. You can focus on the controls with both hands. Worth every penny as have never had a bad launch ever since. (Knock on wood, lol) But I do see you finally invested in an autopilot that works on prayer for brownout emergency landings. So crazy, lol.
@FarmerFpv19 күн бұрын
I’d like to try it!
@hotlapkyle18 күн бұрын
Great flyer! Did you just scale it up from the 64mm version?
@mach990819 күн бұрын
Yup!
@hotlapkyle18 күн бұрын
Good build, and flight, glad it did the auto pilot, did fly well.
@scottconnors790119 күн бұрын
Definitely couldn't get much better landing with no control. Well done mate
@coyoteman807319 күн бұрын
Perfect trim and CG! 😂
@hotlapkyle19 күн бұрын
Thrust vectored version when?
@chikenfpv779819 күн бұрын
Next project going to be a launching catapult
@m14srv19 күн бұрын
DAM lucky
@vrosi196319 күн бұрын
I think 80 and up would be good candidates for some landing gear just because of how awkward they are to hand launch but my god!! You must have been a quarterback cuz you THREW that mf good! She looks amazing in the air
@lewiemotorsports361619 күн бұрын
I was the QB in High school lol but anyone can throw this bird. She flew alway great
@hotlapkyle19 күн бұрын
@@hotlapkyle I believe it. Biggest plane I’ve hand launched was my twin 50 su27 and that almost ended in disaster lol I’m still a noob though
@lewiemotorsports361619 күн бұрын
Holy auto-pilot landing. That thing is a beast. Wow!
@kireol19 күн бұрын
It practically landed itself.
@toolbaggers19 күн бұрын
show the build Mister
@deckape71419 күн бұрын
I wonder, when you are sleeping? 😁 J10C loves high alfa. I have foam version.
@robflyrc19 күн бұрын
Very nice- and very lucky! Where are you getting the printer files from?
@Killerplanes13 күн бұрын
I designed all of them. 👍🏻
@hotlapkyle13 күн бұрын
Wowwow shes pretty 😍🤩 new fav?
@aidenkahn433819 күн бұрын
DAAYYYUUUMMM BOIIII HE THICCCCC😂
@3DPrintHangar_RC18 күн бұрын
No more fiberglass. Use Carbon fiber!
@Wanted106919 күн бұрын
Did you just up scale the files you have in cults3d? I would love to print it for a 90mm edf I have.
@joaquingimenez660019 күн бұрын
Yes sir. Just scaled it
@hotlapkyle19 күн бұрын
XT90 to Deans xD What could go wrong :D
@adamtrzaskowski390119 күн бұрын
Haha 😂
@hotlapkyle19 күн бұрын
Sorry for my question (German) : What is a dean ?
@hinkepank123919 күн бұрын
Deans is an older type of plug and the only reason tonot forget about them is remembering to avoid them. The male ones are a dark red plastic piece with two metal prongst sticking out, one horizontal, one vertical, also known as "T connector".
@tobZZZilla19 күн бұрын
Yeah old style connectors that don’t take more than 80 amps very well. I was sending 130
That was better than most of my controlled landings...
That's why I haven't used Deans in 20 years. As they age, they oxidize and resistance goes way up. They're also prone to just getting dirty. Don't use Deans. The plane looks good! It's very stable.
Reminder of Part 3 of the design smiggen lol just can't wait!
Haha it’s funny, I keep forgetting because I have to tie up my iPad for an hour straight keeping the screen from turning off while the huge files upload. I’ll try it. This morning 👍🏻
@@hotlapkyle sweet! Thanks! Just got the Nx8 on order.
It landed so well for that it wasn't controlled. It works and flyes super nicely and for the hand launch maybe put those dimples in the bottom as you've done with other planes in the past? Cheers 👍💪✌
Amazingly it didn't tumble after the power outage. It's really just bonkers how it managed to stay "upright" with a slight glide for a soft enough touchdown. A90 is just big, one bad toss and it's toast. I'd still go after some type of gear, even if it's not retracts. Great video, awesome that it flies well. AirHammer out!!
That is one gentle giant
I started RC in the late 80s and I have never seen a plane lose power and RC control and land like better than you could have if you were actually trying to land it yourself! That was awesome plus that thing flies freaking great
Haha thanks! I can say I pretty much nailed the CG!! 😂 and it’s got really nice flight characteristics if I don’t day so myself
@@hotlapkyle yes indeed brother good job
You were really lucky when you landed 🛬without any control......thumbs up👍👍
Dude I love your vids. Good planes and good vibes👍👍😊
Make sure that the Canards are at least 1 or 2 degrees down. Neutral will fly but slight down angle on the canards will stabilize it like you won't believe and the CG will still be the same.
That landing? The pilot survived without injury. Wow!
Haha right
super stable! great job!!!
That would be cool with retracts!
XT90 for the 90mm edf with 10-12 gauges wire for the win..
I have since switch from Dean to HXT 60 or 90. Dean goes high resistance over use. Lost my drone due to poor dean connectors.
Just answered a question for me thank you.. . I bought a 90mm mirage second hand and the previous owner has used 10a house wiring between the EDF and the ESC. I was wondering if it would matter if those wires got a little hot 😅
Lucky break on the power loss situation. It looks like a fun plane. I need to print a couple parts for my J10 50 and give it another shot.
"its not gon crash. i mean it crashed" kyle hahaha man what an insane build
Haha!
You need to make a DIY PVC pipe bungee launcher for your EDFs. I built one for 30 dollars that breaks down and fits into a small duffel bag or even a grocery bag. Plenty of Videos on KZhead or RC groups on how to make one step by step all from homedepot or Lowes parts. You can focus on the controls with both hands. Worth every penny as have never had a bad launch ever since. (Knock on wood, lol) But I do see you finally invested in an autopilot that works on prayer for brownout emergency landings. So crazy, lol.
I’d like to try it!
Great flyer! Did you just scale it up from the 64mm version?
Yup!
Good build, and flight, glad it did the auto pilot, did fly well.
Definitely couldn't get much better landing with no control. Well done mate
Perfect trim and CG! 😂
Thrust vectored version when?
Next project going to be a launching catapult
DAM lucky
I think 80 and up would be good candidates for some landing gear just because of how awkward they are to hand launch but my god!! You must have been a quarterback cuz you THREW that mf good! She looks amazing in the air
I was the QB in High school lol but anyone can throw this bird. She flew alway great
@@hotlapkyle I believe it. Biggest plane I’ve hand launched was my twin 50 su27 and that almost ended in disaster lol I’m still a noob though
Holy auto-pilot landing. That thing is a beast. Wow!
It practically landed itself.
show the build Mister
I wonder, when you are sleeping? 😁 J10C loves high alfa. I have foam version.
Very nice- and very lucky! Where are you getting the printer files from?
I designed all of them. 👍🏻
Wowwow shes pretty 😍🤩 new fav?
DAAYYYUUUMMM BOIIII HE THICCCCC😂
No more fiberglass. Use Carbon fiber!
Did you just up scale the files you have in cults3d? I would love to print it for a 90mm edf I have.
Yes sir. Just scaled it
XT90 to Deans xD What could go wrong :D
Haha 😂
Sorry for my question (German) : What is a dean ?
Deans is an older type of plug and the only reason tonot forget about them is remembering to avoid them. The male ones are a dark red plastic piece with two metal prongst sticking out, one horizontal, one vertical, also known as "T connector".
Yeah old style connectors that don’t take more than 80 amps very well. I was sending 130
lw pla?
Yup