KZhead

Hydrogen Generator. HHO how to make 49 plates

Inventive - Water fuel
2023 ж. 6 Сәу.
413 910 Рет қаралды
Жүктеу

Hi all! In this video I present two of my favorite videos with hydrogen generators. The first is one of the most successful hydrogen generators. Thanks for watching and don't forget to subscribe, like and watch my other videos.
#HydrogenGenerator #SaveFuel #WaterFuel

Пікірлер

  • Some of my favorite generators. a new generator is coming next week. follow me to see ❤

    @Inventive101@Inventive101 Жыл бұрын

    • Please can you make one for me?

      @mahadtech4514@mahadtech4514 Жыл бұрын

    • @@mahadtech4514 at the moment I barely had time to make another video... when I get more subscribers and more views maybe I'll make it for you.....

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 okay thank I want to keep one as sample in my village school

      @mahadtech4514@mahadtech4514 Жыл бұрын

    • @@mahadtech4514 Where are you from?

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 Nigeria

      @mahadtech4514@mahadtech4514 Жыл бұрын

  • Excellent video Hydrogen Generator. HHO how to make 49 plates thank you

    @uddinislah3042@uddinislah30428 ай бұрын

    • Thank you! all the best

      @Inventive101@Inventive1018 ай бұрын

  • Wow amazing craftsmanship the best one I seen !!!

    @CiscoTekVR@CiscoTekVR5 ай бұрын

    • Thank you very much!❤❤❤

      @Inventive101@Inventive1015 ай бұрын

  • amazing craftsmanship

    @mrsunyofficial@mrsunyofficial11 күн бұрын

  • Amazing skills! First of all and precise

    @eddieburgett9678@eddieburgett96786 ай бұрын

    • Thank you very much! your opinion matters a lot to me. all the best❤❤❤

      @Inventive101@Inventive1015 ай бұрын

  • Great! Well done! ❤

    @gabrielaplay5598@gabrielaplay5598 Жыл бұрын

    • Thanks❤

      @Inventive101@Inventive101 Жыл бұрын

  • How much did it cost you to have the plates made Sir ?? Would using any specialized conductive additive increase the efficiency of the units ?? Using a ultrasound transducer would keep the bubbles at bay for sure. Nice work fella

    @victoryfirst2878@victoryfirst28786 күн бұрын

  • Outstanding dear friend

    @MacStrange@MacStrange Жыл бұрын

    • Thank you very much my friend!

      @Inventive101@Inventive101 Жыл бұрын

  • Some of my favorite generators. a new generator is coming next week. follow me to see

    @Inventive101@Inventive101 Жыл бұрын

  • Great! Can you make a 5-bar pressure of HHO gas with your dry cell water electrolyzer?

    @laoncao8637@laoncao863710 ай бұрын

    • Yes, I think I can do that

      @Inventive101@Inventive1018 ай бұрын

  • 👍👍👍👍 Θέλω και εγώ ένα...!!

    @theofilospair.2368@theofilospair.23687 ай бұрын

    • I don't make it for sale

      @Inventive101@Inventive1012 ай бұрын

    • Δεν το κάνω προς πώληση, ίσως προσπαθήσω να το κάνω

      @Inventive101@Inventive1012 ай бұрын

  • Well done friend. What fi size and what kind rubber You used in seals. Edpm in long term was dissolving in elektrolyte and made it dirt. What is the proportion koh to h2o? Thx

    @wojciechmayk7083@wojciechmayk70835 ай бұрын

    • thank you very much! I use rubber gaskets but they don't stain anything, the electrolyte mixture is very weak for me. I don't have an exact measure, about 2-3 flakes per half liter of water

      @Inventive101@Inventive1015 ай бұрын

  • I know someone who made a hydrogen generator in a Mason jar and powers his truck with hydrogen. Just adds water occasionally.

    @mr.t7332@mr.t73328 ай бұрын

    • Hello! yes it is possible

      @Inventive101@Inventive1017 ай бұрын

  • A very beautiful video. Please, I want a video in which you explain in detail how to connect the positive and negative poles, where the gas exits from, and how to purify it from oxygen. I would like an explanation of larger generators, for example, 101 segments. Thank you. Follow-up from the Middle East❤️

    @user-tq5ec4lw9c@user-tq5ec4lw9c3 ай бұрын

    • Thank you very much, I will do that for you!

      @Inventive101@Inventive1012 ай бұрын

    • @@Inventive101 Waiting for you, brother

      @user-tq5ec4lw9c@user-tq5ec4lw9c2 ай бұрын

  • i apreciate!👍

    @predamarian-marius3477@predamarian-marius34776 ай бұрын

    • Thank you very much!

      @Inventive101@Inventive1015 ай бұрын

  • please slow down the video and try to write some more details plz btw wonderfull

    @baaz7669@baaz76697 ай бұрын

    • Thank you very much, I have a video with this generator as I explained step by step. thank you!

      @Inventive101@Inventive1015 ай бұрын

    • Thanks ​@@Inventive101. can you please share that video link here? appreciate that

      @zainqazi71@zainqazi71Ай бұрын

  • Epic music 🎶🎵 for epic projects ❤

    @ehvway@ehvway5 ай бұрын

    • 😂

      @Inventive101@Inventive1012 ай бұрын

    • Thanks

      @Inventive101@Inventive1012 ай бұрын

  • How thick plates will I need to power a 125cc engine?

    @Kaleb_Fernandes@Kaleb_Fernandes8 ай бұрын

    • For any generator used on any engine, I think the most suitable ones are 1 mm thick

      @Inventive101@Inventive1018 ай бұрын

  • Which one is better according to you a dry cell hho generator or a wet cell hho generator ?

    @Afzalkhan-nb9rk@Afzalkhan-nb9rk Жыл бұрын

    • Hi, I think it depends on each person's usage. to be used on a car, I think the dry cell is more suitable....

      @Inventive101@Inventive1018 ай бұрын

  • Hi, I like very much toyr videos and I have some questions, if you like to answer me.. it is possimble to use water from a dehumidifier? And the hydrogen you produce, it is pure or it has some oxygen molecules?

    @achris315@achris315 Жыл бұрын

    • Hello! is hydrogen with oxygen (hho). It is not a generator that separates oxygen from hydrogen but it can be done. as for the water from the dehumidifier, I don't know what to say, I don't know anything about it yet, generally distilled water is used....

      @Inventive101@Inventive101 Жыл бұрын

  • How about plans and parts list? I'd like to build and try with my car.

    @mr.t7332@mr.t73328 ай бұрын

    • Hello, I gave all the details and all the measurements in the video, what else do you need?

      @Inventive101@Inventive1017 ай бұрын

    • USE THIS AND YOU WON'T HAVE TO WORRY ABOUT MILEAGE FOR THAT CAR, MAYBE FOR YOURSELF EITHER.

      @jbodden6977@jbodden69777 ай бұрын

    • @@Inventive101 Can it drive a 2.0 displacement car engine?😀

      @LI-pi9gu@LI-pi9gu4 ай бұрын

  • Awsome! Keep going! ❤️

    @gabrielaplay5598@gabrielaplay5598 Жыл бұрын

    • Thanks baby!

      @Inventive101@Inventive101 Жыл бұрын

  • do you know the approximate rate of consumption of the water in the 49 plate version?

    @weatherbeeshouse1662@weatherbeeshouse1662 Жыл бұрын

    • No, I think I didn't run this generator for more than 2 hours

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 please chart the output (volume) of gas, water temperature inside the vessel, and current draw at steady voltage too. LOL.

      @blanksender7808@blanksender7808 Жыл бұрын

  • Πολύ ωραία δουλειά . Τα συγχαρητήριά μου , Φλάντζες για στεγανοποίηση που βρίσκουμε;

    @thomaslpg2@thomaslpg2Ай бұрын

  • Awesome work. Are there any improvement on the generator if you have make more lpm?

    @chris01479@chris01479 Жыл бұрын

    • to produce more hydrogen? bigger generator or increasing the amperes but when you increase the amperes you degrade the generator, so more boards, I will make one with 80 boards... and more...

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 Yes, produce more hydrogen so are you working on it find out how to produce more hydrogen??

      @chris01479@chris01479 Жыл бұрын

    • @@chris01479 Yes, experimenting with them leads to beautiful performances

      @Inventive101@Inventive101 Жыл бұрын

    • Can you produce h2 and O2 separately by putting a wall between anode and chatode? (remain the water contact on the reservoir floor?) The gases rises in the surface by own funnels to be collected?

      @elfillari@elfillari Жыл бұрын

    • ​@@elfillarishould be possible. the result is probably impure.

      @multiarray2320@multiarray23206 ай бұрын

  • Hi nice device, what is the thickness of the acrylic plate?

    @melissachavezportillo8744@melissachavezportillo87449 ай бұрын

    • Thank you! the thickness of the stainless steel plate is 1.5 mm for this generator and 10 mm Pexiglas

      @Inventive101@Inventive1018 ай бұрын

  • Will this work for a lawn mower? Id like to convert my mower to HHO.

    @user-zq6pj5jo8j@user-zq6pj5jo8j7 ай бұрын

    • It will definitely work! but how much grass do you have to mow?

      @Inventive101@Inventive1015 ай бұрын

    • @@Inventive101 Not having to buy gas for my mower and having clean burning mower would be great.

      @user-zq6pj5jo8j@user-zq6pj5jo8j5 ай бұрын

    • @@Inventive101 Have you tried to use a battery to power it? Like maybe a Dewalt drill battery, The 20Vdc 6amp type? Does it work?

      @user-zq6pj5jo8j@user-zq6pj5jo8j5 ай бұрын

    • @@user-zq6pj5jo8j yes i tried But, it works. I tried with bosch and milwaukee

      @Inventive101@Inventive1015 ай бұрын

  • I liked the last one. I'm thinking about to use it on a motobyke, ¿What do yout think?. BTW, your work it's awesome...

    @jesuseduardo5658@jesuseduardo56582 ай бұрын

    • they can also be used for motorcycles, thank you!

      @Inventive101@Inventive1012 ай бұрын

  • hello, happy easter!❤❤❤

    @Inventive101@Inventive101 Жыл бұрын

  • Which supply is use for this HHO generator, because i am confuse that your multimeter Amp reading shows AC current.

    @dipakchavan9911@dipakchavan9911 Жыл бұрын

    • the video was made two years ago, I used a car battery as a power source, if that tool is for AC current and not DC, it is possible that the values are not correct.... I will check,.....

      @Inventive101@Inventive101 Жыл бұрын

    • the video was made two years ago, I used a car battery as a power source, if that tool is for AC current and not DC, it is possible that the values are not correct.... I will check,.....

      @Inventive101@Inventive101 Жыл бұрын

  • You've got some of the cleanest d.i.y. on KZhead. Excellent work.

    @rj8372@rj83722 ай бұрын

    • Thank you very much for the follow-up comment

      @Inventive101@Inventive1012 ай бұрын

  • A nice electrolyser but what fuel are you saving?

    @hadham101@hadham1012 күн бұрын

  • Nice design

    @1cnfour349@1cnfour3497 ай бұрын

    • Thanks

      @Inventive101@Inventive1012 ай бұрын

  • It would be nice if you would describe every element that you show in the caption...

    @michakrawczuk7922@michakrawczuk79227 ай бұрын

    • I have a video with this generator as I explained each step and each measure...

      @Inventive101@Inventive1015 ай бұрын

  • Muito bom seus projetos

    @navegadorfamiliar8579@navegadorfamiliar85795 ай бұрын

    • Muito obrigado!❤❤❤

      @Inventive101@Inventive1015 ай бұрын

  • Привет. У тебя пластинки + и - . Или есть нейтральные как у Joe cell??. Маленькие пузырьки как получить? Сколько тока потребляет аппарат?

    @victorschauberger9866@victorschauberger9866 Жыл бұрын

    • я не понимаю твоего сообщения

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 Спасибо за ответ. Я хотел узнать знаком ли ты с Joe Cell технологией?

      @victorschauberger9866@victorschauberger9866 Жыл бұрын

  • How would you separate the hydrogen from the oxygen if you wanted. Does nitrogen liquify under pressure?

    @michelcharron5992@michelcharron59927 ай бұрын

    • I already separated it with another generator, another video

      @Inventive101@Inventive1012 ай бұрын

    • @@-sycamore I'm a beginner but I have already done this...

      @Inventive101@Inventive1012 ай бұрын

    • @@Inventive101 I was talking about separating them when they're mixed up, I mean it's possible but not really worth it since you can separate them from the source

      @-sycamore@-sycamore2 ай бұрын

    • @@-sycamore I understand, but maybe it's not worth it because you lose a lot of energy

      @Inventive101@Inventive1012 ай бұрын

  • HHO Should be the future not EV's.

    @professormadlad7773@professormadlad77737 ай бұрын

    • No real results have come of this. Mass production isn't possible atm.

      @jeffder7143@jeffder71436 ай бұрын

    • ​@@jeffder7143says who?

      @hackervirus56@hackervirus565 ай бұрын

    • Nah, cars would be too slow and you would need pig hydrogen production plants to make shit tones of it electric cars are better I'd say

      @itzpogboy@itzpogboy4 ай бұрын

    • can't exploit 3rd world countries with sending their children to mine toxic substances like lithium with hho.. good ol American sheepish consumerism 5

      @joshuaslomba8288@joshuaslomba82883 ай бұрын

    • Real talk hydrogen is the future. Look up capillary fed electroyzers and why they're so great and what the engineering problems were for PEM electroysisers. Also the DOE just funded a billion dollars to build 8 hydrogen facilities in the PNW

      @tannerw1332@tannerw13323 ай бұрын

  • have you tried making a column to separate hydrogen from oxygen?

    @embededfabrication4482@embededfabrication44828 ай бұрын

    • Hello, yes I have two hydrogen generators that separate the gases

      @Inventive101@Inventive1018 ай бұрын

    • @@Inventive101 I saw them. have you tried separating oxygen and hydrogen after it's produced as a mixture in the HHO generators? should be able to use a column with outlet at top for hydrogen and bottom for oxygen

      @embededfabrication4482@embededfabrication44828 ай бұрын

  • verygood❤❤❤

    @user-me9mp5lf4x@user-me9mp5lf4x Жыл бұрын

    • Thanks!

      @stefanpricop1910@stefanpricop1910 Жыл бұрын

    • Thanks!

      @Inventive101@Inventive101 Жыл бұрын

  • Nice, really nice made. Butt This is not making Hydrogen only, it'll be a stoichiometric mix of Hydrogen & Oxygen gas, a real explosive mixture.

    @maituub@maituub3 ай бұрын

    • thank you! it is a very explosive mixture

      @Inventive101@Inventive1012 ай бұрын

  • What is that black material between plates? Thank you

    @lukaslukas12@lukaslukas12 Жыл бұрын

    • Hello. it's rubber

      @Inventive101@Inventive1018 ай бұрын

  • I have a suggestion for you to consider: do your electrolysis in the presence of a strong magnetic field. Oxygen is paramagnetic, and apparently, the presence of a magnetic field help with the formation of O2 molecules. When using an array of magnets to supply the field, arrange them in a Halbach array so you make the most efficient use of the magnetic field.

    @Berkana@BerkanaАй бұрын

  • what is that crastals which is mixed in water?

    @driftingadda@driftingadda8 ай бұрын

    • Hello! it is potassium hydroxide. potassium hydroxide flakes

      @Inventive101@Inventive1018 ай бұрын

    • @@Inventive101 Is there a way to contact you personally? I have some questions about a project

      @Mohammed-uz1sn@Mohammed-uz1sn8 ай бұрын

    • @@Mohammed-uz1sn Lately I haven't really had time for my projects either... you can write here or send me an email, but I don't know when I can answer you, where are you from?

      @Inventive101@Inventive1018 ай бұрын

    • @@Inventive101 I am from Saudi Arabia. I will contact you, but do you have an email?

      @Mohammed-uz1sn@Mohammed-uz1sn8 ай бұрын

    • @@Inventive101 sir

      @Mohammed-uz1sn@Mohammed-uz1sn8 ай бұрын

  • Gracias por contribuir a la libertad de la humanidad , un paso mas adelante paque seamos libres y no depender jamas de las petroleras

    @juanjoseromannarvaez2273@juanjoseromannarvaez22739 ай бұрын

    • ¡Con mucho gusto! Pero todo hasta cierto punto, todo se detendrá si se publica un vídeo con hho producido de forma gratuita.

      @Inventive101@Inventive1018 ай бұрын

  • 👍 complimenti

    @MrMsD77@MrMsD776 ай бұрын

    • Grazie mille!❤❤❤

      @Inventive101@Inventive1015 ай бұрын

  • and now how to store this gas in a save and efficient way.....

    @olafjacobs3754@olafjacobs37547 ай бұрын

    • I don't advise to store it, I think it would be much safer to produce only what you burn...

      @Inventive101@Inventive1017 ай бұрын

  • I made an awesome hydrogen generator with a big truck battery 😊

    @simonallan9941@simonallan99412 ай бұрын

    • Congratulations! do you have good results?

      @Inventive101@Inventive1012 ай бұрын

  • what kind of steel do you used for it?

    @claudiog.nogueiras2323@claudiog.nogueiras23237 ай бұрын

    • It can be CD Dvd, harddrive. And zink screews

      @1x2x3xPP@1x2x3xPP5 ай бұрын

  • ΓΕΙΑ ΣΟΥ ΑΠΟ ΤΗΝ ΘΕΣΣΑΛΟΝΙΚΗ.ΟΙ ΣΥΣΚΕΥΕΣ ΣΟΥ ΕΙΝΑΙ ΤΕΛΕΙΕΣ ΚΑΙ ΘΑ ΗΘΕΛΑ ΝΑ ΜΑΘΩ ΕΑΝ ΣΚΟΠΕΥΕΣ ΝΑ ΠΟΥΛΗΣΕΙΣ ΑΥΤΗΝ ΜΕ ΤΙΣ 49 ΠΛΑΚΕΣ,ΠΟΣΟ ΘΑ ΕΠΙΑΝΕ ΚΑΙ ΠΟΣΟ ΚΟΣΤΗΣΑΝ ΤΑ ΥΛΙΚΑ ΤΗΣ.ΕΥΧΑΡΙΣΤΩ ΕΚ ΤΩΝ ΠΡΩΤΕΡΩΝ.

    @iliaskaragiannis7872@iliaskaragiannis7872 Жыл бұрын

    • Γεια σας, έμενα στην Ελευσίνα περίπου 16 χρόνια. Τα υλικά για αυτή τη γεννήτρια φτιάχτηκαν πριν 13 χρόνια που είχα καιρό να παίξω, μου κόστισαν περίπου 400 ευρώ... Δεν πουλάω, και δεν φτιάχνω προς πώληση

      @Inventive101@Inventive101 Жыл бұрын

  • pouco gas gerado, deve produzir 50x mais para um veiculo de 160 cv... 100% h20

    @paulobigaton1221@paulobigaton12217 ай бұрын

    • Quanto seriam necessários 160 cv?

      @Inventive101@Inventive1015 ай бұрын

  • Thick plates like this does not make the electrolyzer stronger, just heavier and more bulky. Less is more

    @waynoswaynos@waynoswaynos Жыл бұрын

    • the thickness has nothing to do with the production, no one said that...

      @Inventive101@Inventive101 Жыл бұрын

    • Thickness has nothing to do with production

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 no offence my friend, in this great video you don't say anything with actual narration so people must extrapolate what must be done visually. You measured a 1.6mm plate with a vernier so your followers think this is the way it must be done. In my experience bulk and weight in a device, if it can be avoided, should be avoided. When making electrolyzers with 20 or more plates this becomes important. With 0.5mm plates a large series electrolyzer is a lot lighter and takes up less space. You can even cut the metal with regular scissors, but better to get a professional waterjet or laser cutter to cut them for you.

      @waynoswaynos@waynoswaynos Жыл бұрын

    • @@waynoswaynos The thinner plates may corrode faster. So in theory thicker may be better if you plan on using the device for some time.

      @TheTubejunky@TheTubejunky Жыл бұрын

    • May be right, but the type a of steel alloy should be more decisive concerning corrosion. Also the electrolyte should play a major role. There certainly are data sheets available for these parameters. Maybe hard to get.

      @aurasensor@aurasensor7 ай бұрын

  • this video is a hit 😁

    @Inventive101@Inventive101 Жыл бұрын

    • Some of my favorite generators. a new generator is coming next week. follow me to see

      @Inventive101@Inventive101 Жыл бұрын

    • Some of my favorite generators. a new generator is coming next week. follow me to see

      @Inventive101@Inventive101 Жыл бұрын

    • Some of my favorite generators. a new generator is coming next week. follow me to see

      @Inventive101@Inventive101 Жыл бұрын

    • Some of my favorite generators. a new generator is coming next week. follow me to see

      @Inventive101@Inventive101 Жыл бұрын

    • Some of my favorite generators. a new generator is coming next week. follow me to see

      @Inventive101@Inventive101 Жыл бұрын

  • Genial

    @luisaguirre1127@luisaguirre1127 Жыл бұрын

    • Thanks!

      @Inventive101@Inventive101 Жыл бұрын

  • I need one? How can order?

    @aa7adnan@aa7adnan6 ай бұрын

    • I don't usually sell, where are you from?

      @Inventive101@Inventive1012 ай бұрын

  • What power source?

    @Gman704@Gman7048 ай бұрын

    • 12 V

      @Inventive101@Inventive1017 ай бұрын

  • Video title should be DIY 12V blowtorch with water.

    @C0lbyte@C0lbyte6 ай бұрын

    • 😂 yeah❤

      @Inventive101@Inventive1015 ай бұрын

  • What do you add to the water?

    @ElDeivid-88@ElDeivid-889 ай бұрын

    • Potassium hydroxide in the form of flakes

      @Inventive101@Inventive1018 ай бұрын

    • @@Inventive101 In what ratio water to KOH?

      @albertwolanski7688@albertwolanski76884 ай бұрын

  • 🤔with this device 's we can have warm water and all the time and we can warm up our homes in to the cold winters!

    @predamarian-marius3477@predamarian-marius34776 ай бұрын

    • It could be done! but it depends a lot on how you do it and what kind of energy you use

      @Inventive101@Inventive1015 ай бұрын

  • to see more videos, don't forget to subscribe, like and comment 🙏🙏🙏

    @Inventive101@Inventive101 Жыл бұрын

  • who would invest in a hho project 100% on installed on a car?

    @Inventive101@Inventive101 Жыл бұрын

  • Which type back fire arrestor used..??

    @yasarali45@yasarali45 Жыл бұрын

    • Hello Friend. I use flashback arrestor acetylene. good luck

      @Inventive101@Inventive101 Жыл бұрын

  • the last one is not good with the wires inside those will oxidize.

    @edwingolddelirium@edwingolddelirium Жыл бұрын

    • They will not oxidize, it is 316L stainless steel. instead, the water is heated more than it should be

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 above the stainless steel wires i saw electric wires connected inside.

      @edwingolddelirium@edwingolddelirium Жыл бұрын

    • @@edwingolddelirium now I understand what you are saying that it will oxidize. that part should not be in water, and better insulation... but the copper always oxidizes there...

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 I had the same issue. its now outside.

      @edwingolddelirium@edwingolddelirium Жыл бұрын

    • @@edwingolddelirium ok, thanks, I don't use it much, just a few tests, I don't use it for anything, I just like doing them. Good luck my friend!

      @Inventive101@Inventive101 Жыл бұрын

  • Двойные пружины пусть электро поле проходит насквозь снизу в верх + и также насквозь сверху вниз _\направленно\опробуйте ===для ионной модели расчёт в будущем

    @user-fh5qx5vb1f@user-fh5qx5vb1f5 ай бұрын

    • Я действительно не понимаю

      @Inventive101@Inventive1015 ай бұрын

  • Can you please tell me which type of water and which was you add in the water and also need ratio

    @KhurshidAkhter-uc7et@KhurshidAkhter-uc7et22 күн бұрын

  • Attached it to solar panels, to make it self sufficient.

    @sernanlloren8432@sernanlloren84325 ай бұрын

    • That's ideal, I'll do it

      @Inventive101@Inventive1015 ай бұрын

  • Thanks

    @MindenMobil@MindenMobil5 ай бұрын

    • ❤❤❤

      @Inventive101@Inventive1015 ай бұрын

  • Mbravo, ise therio! Evxaristo polly

    @kopterbob8142@kopterbob81425 ай бұрын

    • Με ευχαρίστηση! γνωριζόμαστε;

      @Inventive101@Inventive1015 ай бұрын

  • Bonjour. Quel est ce poudre que vous mettez dans l'eau

    @user-mw6xx7lp2s@user-mw6xx7lp2s7 ай бұрын

    • Salut! c'est de l'hydroxyde de potassium. tous mes vœux

      @Inventive101@Inventive1015 ай бұрын

  • how much did it cost you to buid this setup?

    @skaterscourse2050@skaterscourse20504 ай бұрын

    • about 400 euros for the materials 5 years ago

      @Inventive101@Inventive1012 ай бұрын

  • Apa yang akan terjadi jika mesin sepeda motor menggunakan bahan bakar hidrogen??

    @aedi_project_indonesia@aedi_project_indonesia8 ай бұрын

    • Dengan sistem pelumasan yang baik, tidak ada hal istimewa yang terjadi selain pembakaran normal

      @Inventive101@Inventive1018 ай бұрын

  • I would like to make a generator from 80-100 boards.. for that I need support...🙏🙏🙏❤️❤️❤️

    @Inventive101@Inventive101 Жыл бұрын

    • μπορώ να σε βοηθήσω

      @user-xg6ge7ig5k@user-xg6ge7ig5k7 ай бұрын

  • we really need this thing to circulate and get it done pronto, we have abundant resource for energy yet not utilized, how can i get in touch mate?

    @dbcasts6849@dbcasts684918 күн бұрын

  • merci

    @-LeClown@-LeClown2 ай бұрын

    • Thanks

      @Inventive101@Inventive1012 ай бұрын

  • Do it on any combustion engine..

    @roelapostol3372@roelapostol33725 ай бұрын

    • I'm going to do this! I don't have much time

      @Inventive101@Inventive1015 ай бұрын

  • F. Frumos

    @stefanpricop4717@stefanpricop4717 Жыл бұрын

    • Mulțumesc!

      @Inventive101@Inventive101 Жыл бұрын

  • And also which one gets hot faster?

    @Afzalkhan-nb9rk@Afzalkhan-nb9rk Жыл бұрын

    • Hello, sorry for the delay. if they are done well, none of them get hot, but with a dry cell it is much easier to ventilate the water.

      @Inventive101@Inventive1017 ай бұрын

  • Has anyone tried to make a generator with graphite plates?

    @Inventive101@Inventive101 Жыл бұрын

    • Graphene (coated) plates would also be interesting. Graphene has 10x conductivity than copper. Probably impossible to acquire...

      @aurasensor@aurasensor7 ай бұрын

  • Ac,OrPulsedDvWorksForHhoGenerator?

    @ovidius2000@ovidius2000 Жыл бұрын

    • Dc 12 V

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 ThisIsStandard,ButAcNobodyTried.

      @ovidius2000@ovidius2000 Жыл бұрын

  • Can we get .dwg for this project?

    @yassinalielouahed5607@yassinalielouahed56076 ай бұрын

    • I think I still have these files saved somewhere

      @Inventive101@Inventive1015 ай бұрын

  • Hello, can you explain in detail what liquid mixture you use?

    @johansyahbutarbutar2974@johansyahbutarbutar29742 ай бұрын

    • Howdy! I use distilled water and potassium hydroxide

      @Inventive101@Inventive1012 ай бұрын

    • @@Inventive101 How do you figure out the amount of potassium hydroxide?

      @jeschinstad@jeschinstadАй бұрын

  • @basileias2002@basileias2002 Жыл бұрын

    • ❤

      @Inventive101@Inventive101 Жыл бұрын

  • I want to see a hydrogen generator made out of closely spaced, metal screen mesh, instead of plates

    @spiritualforever1642@spiritualforever1642Ай бұрын

  • funcionará para ir a pasear en mi carro sin usar gasolina

    @crsistobal@crsistobal9 ай бұрын

    • Sí, es posible utilizarlo si se hace correctamente.

      @Inventive101@Inventive1018 ай бұрын

  • Why is the output of hho is so low for such a big scale project?

    @darcymunro8930@darcymunro89304 ай бұрын

    • it's not low from my point of view, a hho production of 2 liters per minute with 13 amps consumed at 12v is a good result i think

      @Inventive101@Inventive1012 ай бұрын

  • I am interested in HHO for my 3000 C.C. Gasoline engine. Please suggest a suitable HHO design for me. And share your link for everyone who thinks like me.

    @AnandSaprasert@AnandSaprasert2 ай бұрын

    • hello, I only installed 1800 on my own car, I don't know anything about the rest. I think one like this would be good.

      @Inventive101@Inventive1012 ай бұрын

  • Usen agua de mar que es lo mejor

    @jaribsabillon5335@jaribsabillon5335 Жыл бұрын

    • Tengo un video de agua de mar, pero en unos minutos y medio el agua esta turbia

      @Inventive101@Inventive101 Жыл бұрын

  • can someone help me with a pulsating current source? I don't know if I said it right...

    @Inventive101@Inventive101 Жыл бұрын

  • Buenas tardes , sería posible comprar? Por falta de tiempo y búsqueda de materiales no puedo fabricarlo. Gracias

    @MrAnache@MrAnacheАй бұрын

  • Please share materials details which are used in this project ...

    @Ashupandey98@Ashupandey986 ай бұрын

    • I explained each one separately what it is, 304 stainless steel plates, rubber joints and plexiglass

      @Inventive101@Inventive1015 ай бұрын

  • Now just need to make a cell that separates the Hydrogen from oxygen.

    @JoshuaCussins@JoshuaCussins2 ай бұрын

    • I had two separate cells already

      @Inventive101@Inventive1012 ай бұрын

  • Can it drive a 2.0 displacement car engine?😀

    @LI-pi9gu@LI-pi9gu4 ай бұрын

    • to use only hho without other fuel, you need 2 bars of hho constantly

      @Inventive101@Inventive1012 ай бұрын

  • Why do I feel oceangate vibes XD

    @MandeepPreeSINK@MandeepPreeSINK5 ай бұрын

    • Hello! I do not understand

      @Inventive101@Inventive1015 ай бұрын

    • @@Inventive101 just the clear end, reminds me of the oceangate sub porthole window XD

      @MandeepPreeSINK@MandeepPreeSINK5 ай бұрын

  • Hate the music. Fascinating build to watch while muted.

    @malkeus6487@malkeus64876 ай бұрын

    • 😬 yes, I won't play the music anymore. thank you

      @Inventive101@Inventive1015 ай бұрын

  • Can you turn up or down 🤷🏿‍♀️

    @udownwito.p.p4153@udownwito.p.p4153Ай бұрын

  • is there anyone who would invest in HHO gas research?

    @Inventive101@Inventive101 Жыл бұрын

    • LOL. you'd probably have better luck shilling a shit coin

      @blanksender7808@blanksender7808 Жыл бұрын

    • Yes,I researched in hho in india tamil nadu.but your is my teacher. Thanks sir

      @gnanamoorthir6645@gnanamoorthir6645 Жыл бұрын

    • @@gnanamoorthir6645 Glad to hear that, good luck

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 thanks Lat,I success the project with your wishes. I gave a maruti 800 corpurator madel car to research.

      @gnanamoorthir6645@gnanamoorthir6645 Жыл бұрын

    • @@gnanamoorthir6645 I'm glad, just fine

      @Inventive101@Inventive101 Жыл бұрын

  • Now make a trashbag float away with a timed zappy dappy happy circuit. Should wake up a few neighbors. Serious don't do this.

    @TheTubejunky@TheTubejunky Жыл бұрын

    • 😁 I've done this before, I don't know in which video exactly, but in any case, you don't feel the vibrations of the explosion, outside of course

      @Inventive101@Inventive101 Жыл бұрын

    • @@Inventive101 NOICE!!!! Stay safe and enjoy life my friend!

      @TheTubejunky@TheTubejunky Жыл бұрын

    • @@Inventive101 Look up the video fo Techingredients he has one with a huge bang.

      @TheTubejunky@TheTubejunky Жыл бұрын

  • 😀

    @mdrafiqul3358@mdrafiqul33584 ай бұрын

    • Thanks

      @Inventive101@Inventive1012 ай бұрын

  • ⭐️⭐️⭐️⭐️⭐️

    @ceyhunacikdilli5275@ceyhunacikdilli52753 ай бұрын

    • Thanks

      @Inventive101@Inventive1012 ай бұрын

  • سلام استاد استاد.بین میله های استیل که عایق بودند یکی میله بدون عایق که رسانا بود دلیلشو میفرمائید

    @user-dn8sg1js5l@user-dn8sg1js5l4 ай бұрын

    • سلام! آن میله های بدون عایق فقط برای برش استفاده می شدند، بعداً حذف شدند

      @Inventive101@Inventive1012 ай бұрын
KZhead