KZhead

Not Many People Know The Secret Of This Tool!!

Alva Welding
2024 ж. 13 Ақп.
13 027 839 Рет қаралды
Жүктеу

Hello everyone! You are watching video "Not Many People Know The Secret Of This Tool!!"
Explore the process of turning a wrench into a plastic pipe disassembly tool. Learn how to leverage technology and engineering to create an efficient and time-saving plastic pipe repair tool.
I hope you enjoy watching my video!
On Alva Welding Channel, we share: Welding, welding tips and tricks, welding fabrication and techniques, How to weld, DIY, life hacks, weld.com...
Alva Welding is a channel that discusses welding, how to weld thin metals, how to weld square pipes, how to weld round pipes and synthesize good and correct welding techniques. The channel is suitable for everyone, especially beginners.
I hope this channel is helpful and don't forget to subscribe!!
► Subscribe to Alva Welding channel: http:
© Copyright by Alva Welding☞ Do not Reup

Пікірлер

  • Wouldn’t it have just been easier to go back to your tool box and get the bigger wrench?😊

    @mikemay8334@mikemay83342 ай бұрын

    • The labor involved in this stupid trick. I could have spent that time to make more than enough money to buy any tool I needed for the job.

      @GJ-wy1il@GJ-wy1il2 ай бұрын

    • 😊

      @erickjaviergonzalezcervant7024@erickjaviergonzalezcervant70242 ай бұрын

    • ​@@GJ-wy1ilPara quién tenga un lugar donde comprar bárbaro pero si tenés que hacer un trabajo a 120 km de la ciudad más cercana tenés que ingeniarte para hacer el trabajo con lo que tengas a tu disposición y recorrer 240 km para comprar una herramienta lo digo con propiedad a mi me pasó así que el que no le interesa la idea no critique

      @nelsoneduardodollanarte6189@nelsoneduardodollanarte61892 ай бұрын

    • This is perfect ❤❤...adjustable diameter, even better than I had imagined!!..thanks for great insight!!

      @Omwereru@Omwereru2 ай бұрын

    • Yea right !! What a waste of time

      @user-nj2mb2qp2g@user-nj2mb2qp2g2 ай бұрын

  • I don’t think that’s a secret of the tool mate. You destroyed the tool to make a different one…

    @coptotermes@coptotermes2 ай бұрын

    • 😂

      @alanoliveira3446@alanoliveira34462 ай бұрын

    • 🍀☘☘😘😘😘😚😚😚

      @Alvawelding20@Alvawelding202 ай бұрын

    • I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

      @Alvawelding20@Alvawelding202 ай бұрын

    • need a way to ban clickbait scammers

      @golgothan@golgothan2 ай бұрын

    • He also F-ed UP a perfectly good Motorcycle chain.....:>)

      @largemember@largemember2 ай бұрын

  • Workshop Rule number 1: Use the right tool for the right job!

    @traytrid9367@traytrid936711 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding209 күн бұрын

  • A “secret” of a tool isn’t true. Should be: come watch my inability to grab the correct tool when the one I have isn’t working. Watch me waste your time.

    @blamehypocrisy.4053@blamehypocrisy.405315 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2013 күн бұрын

    • Completely agree. It’s not a secret of a tool when you had to do all that to it.

      @joer7467@joer746712 күн бұрын

    • Spot on!

      @robertmiller7516@robertmiller751612 күн бұрын

    • You should be kinder, I think he is third world...

      @chrishobson7535@chrishobson753511 күн бұрын

    • I agree, just get a bigger wrench. Stupidity at work here

      @mikeburnett7028@mikeburnett702810 күн бұрын

  • Three minutes of my live that I will never have back.

    @Aktionaer@AktionaerАй бұрын

    • I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

      @Alvawelding20@Alvawelding20Ай бұрын

    • I would much rather be able to hang it up. That was one of the dumbest ideas I've ever seen.

      @sandraheilman2543@sandraheilman2543Ай бұрын

    • It’s pretty cleaver

      @bernardrobertgilbride603@bernardrobertgilbride603Ай бұрын

    • No, it’s just dumb.

      @bobvecchi304@bobvecchi30413 күн бұрын

    • @@Alvawelding20 It met no one's expectation.

      @joreemmcmillan7145@joreemmcmillan714513 күн бұрын

  • That's pretty inventive. HOWEVER, I think the hole was to HANG IT from a nail on the wall to easily locate and use later

    @shaunelijah2232@shaunelijah223213 күн бұрын

    • eye level, please, my workmate can't find f.....k all unless it's eye level. no teenagers bedroom with all on the floor!!

      @user-ov4mk9ox8y@user-ov4mk9ox8y12 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2012 күн бұрын

    • The adjustable wrench was invented for electricians to have a one tool option to fit different size lug bolts. the smooth edged hole is for bending larger gauge conductors so the insulation doesn't get damaged.

      @mikesibert1723@mikesibert172312 күн бұрын

    • Thanks for that- more useful than the actual video😂😂😂

      @user-uv8bv4dm9f@user-uv8bv4dm9f11 күн бұрын

    • No, the hole at the end is a fingerhole used for spinning the wrench in and out of your tool belt like a gunslinger...

      @myfirstmma@myfirstmma11 күн бұрын

  • There is a fantastic tool called a "pipe wrench" its sole purpose is to remove locking nuts off of pipes.

    @Cam-vz3le@Cam-vz3le17 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2016 күн бұрын

    • @@Alvawelding20Do you have a pipe wrench?

      @dmr1426@dmr142610 күн бұрын

    • Except this is not the place for a pipe wrench. Clearly, the correct size open ended wrench is what is needed. Jesus h, this isn’t complicated.

      @carpballet@carpballet9 күн бұрын

    • @@carpballet but destroying a perfectly good crescent wrench is??? By your response its true....one cant fix stupid.

      @Cam-vz3le@Cam-vz3le9 күн бұрын

    • @@Cam-vz3le Huh? You’re high. I’m not advocating for destroying anything. I’m not sure you know what a pipe wrench is or what it’s intended use is.

      @carpballet@carpballet9 күн бұрын

  • The fact that he's using an adjustable wrench in the first place explains everything lol.

    @tribounty1392@tribounty139212 күн бұрын

    • ain't that the truth

      @ernestnelson2407@ernestnelson240711 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2011 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2011 күн бұрын

    • Knuckle buster wrench.

      @donr5593@donr559310 күн бұрын

  • I live in Germany, and for that kind of work we have invented pliers 👍

    @lupuscanis7523@lupuscanis75232 ай бұрын

    • you german guys are always in front

      @cheubs@cheubs2 ай бұрын

    • 😂

      @willbee6785@willbee67852 ай бұрын

    • 🍀☘☘😘😘😘😚😚😚

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding202 ай бұрын

  • Anyone that makes a negative comment has never had to improvise to get the job done. Not every company provides every tool you need, nor does every tradesman own every tool. Sometimes you need to use your brain. I like this.

    @williamrobinson604@williamrobinson6049 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding207 күн бұрын

  • Good tip! You tube is available to millions of people that can have access to this good idea where it is not easy or possible to just go out and buy the right tool.

    @marksicawilliams@marksicawilliamsАй бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

    • IF you happen to live in the OUTBACK!....still,you will need to drive 1609.344 km- round trip, just to buy the chain....GREAT IDEA!!!!.....:>)

      @largemember@largememberАй бұрын

    • Yes, they can run right out to HF and buy a cheap chinese grinder to mangle a cheap chinese wrench. KZhead needs a voting system that could delete garbage videos.

      @davebryant8050@davebryant805012 күн бұрын

    • @@davebryant8050 HARBOR FREIGHT...AKA,the CHINESE LANDFILL JUNK STORE!!!.....:>)

      @largemember@largemember12 күн бұрын

  • You have a grinder,cutting wheels,drill,drill bits and a vise but not a bigger wrench 😂

    @briancrigger6437@briancrigger64372 ай бұрын

    • ...or a chain wrench...

      @bobmanners8624@bobmanners86242 ай бұрын

    • And that chain is going to be a pain in the neck when using the wrench as it was intended 😂

      @johnhilton4054@johnhilton40542 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Hope you have a good time while watching the video

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Hope you have a good time while watching the video

      @Alvawelding20@Alvawelding202 ай бұрын

  • This is just sheer madness, cutting the hole of an adjustable wrench and spoiling it. Instead you can use a pipe wrench or chain wrench.

    @premachandranpottekkat5335@premachandranpottekkat53352 ай бұрын

    • I agree

      @howie1020@howie10202 ай бұрын

    • Yes, but what if you're a contestant on Naked and Afraid, you have to survive in the wilderness and you're only allowed to bring one tool? They won't allow you to bring a Crescent wrench AND a pipe wrench.

      @robertmatthews2009@robertmatthews20092 ай бұрын

    • Σε τι θα σου χρειαστουν στην ερημο αυτα τα εργαλεια; Μια ομπρελα για τον ηλιο παρε καλυτερα.

      @user-oc1bv5ej5t@user-oc1bv5ej5t2 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Hope you have a good time while watching the video

      @Alvawelding20@Alvawelding202 ай бұрын

  • There are a dozen variations of this versatile tool sold all over the country but they lack the satisfaction of building your own. Not to mention the higher quality of work and material. Kudos young man.

    @joeedwards1895@joeedwards1895Ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

    • @@Alvawelding20 How are you going to hang this stupid adjustable wrench

      @amavic1@amavic121 күн бұрын

    • Higher quality? He used all old rusted parts and wasted more time and energy than grabbing a bigger wrench!! LOL

      @jraymondjames5809@jraymondjames580917 күн бұрын

  • The only alteration I've done to a crescent wrench is welding a cut off 1/2" drive socket to the handle. I've always had a 1/2" drive breaker bar and never have to look for a cheater pipe. Works great. Did it in 1996 working on otr trucks. 👍

    @Deacon_T@Deacon_TАй бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding20Ай бұрын

  • The rule "right tool for the right job" applies here. I have a Knipex adjustable pliers in my box that would work just fine here. Cutting up and modifying my nice wrenches that I've had for many years would break my heart.

    @martinschulz9381@martinschulz9381Ай бұрын

    • There is absolutely no reason to cut up a perfectly good wrench when an open end wrench in your tool box would fit perfectly, but then you're way too lazy to go looking for that open end wrench.

      @halspencer6613@halspencer6613Ай бұрын

    • What if he didn't have the tool. Just watch and learn. Not all tools are created equal. Just like men aren't. Some of you listen to your woman too much.

      @aaronchavez8511@aaronchavez8511Ай бұрын

    • @@aaronchavez8511 He had a roller chain, a drill, and a grinder, but he didn’t have a wrench, a channel lock pliers, or a pipe wrench?

      @martinschulz9381@martinschulz9381Ай бұрын

    • 💯 true

      @rv_316@rv_316Ай бұрын

    • I am a marine engineer, and that shifter I will never cut up like that. My chief will skin me alive......😮😮. Though we do have that chain type wrench in some ships. I have seen it. Useful in tricky places...🙏

      @rv_316@rv_316Ай бұрын

  • This tool has existed for countless years, in some places it is called "pipe wrench", in others "chain wrench", and in others "clamp wrench" and it is widely used in both mechanics and plumbing!

    @joanmanuel469@joanmanuel4692 ай бұрын

    • For us with arthritis it's known as a jar opener too. 😂

      @Bobbysheresomewhere@Bobbysheresomewhere2 ай бұрын

    • @@Bobbysheresomewhere Good sense of humor, but as much as that, to open the blinking jars we use the classic utensil that is a can opener, corkscrew, and bottle opener! But everything is valid! Greetings 😁👌

      @joanmanuel469@joanmanuel4692 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding202 ай бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

  • So cool! Great idea. I now want to make this for my engineering department!

    @Lil-Cardiac@Lil-CardiacАй бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding20Ай бұрын

  • You even hear the enthusiasm of the chickens in the background, they just began to spread the news all around how fantastic it's working!

    @Raucherbeinknacker@RaucherbeinknackerАй бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

    • They’re yelling at him for being an idiot and not just getting the right tool for the job to begin with b

      @KendrasEdge757@KendrasEdge757Ай бұрын

  • It would be easier to just go to the nearest tool center and purchase a larger wrench.

    @user-gy9dx7eu1y@user-gy9dx7eu1y2 ай бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • Some people are naturally handy and like to invent things (with parts or material that they found and never used, for example). I thought about something for my air conditioner this week, and it works.

      @20EUR20@20EUR202 ай бұрын

    • And if the nearest tool centre is a two hour drive away?

      @jackfrost2146@jackfrost21462 ай бұрын

    • ...or farther?? yeah....BTDT improvise, overcome, adapt!!! OOHHRAH!!@@jackfrost2146

      @ssnerd583@ssnerd5832 ай бұрын

    • Or a chain wrench, if that’s what was needed.

      @martinowl@martinowl2 ай бұрын

  • A pipe wrench would work just as well 😮

    @anthonysaverio5003@anthonysaverio50032 ай бұрын

    • Precisely. 😊

      @kevinbourke4038@kevinbourke40382 ай бұрын

    • Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

      @Alvawelding20@Alvawelding202 ай бұрын

    • that's for the next video, when he welds a crowbar to the handle (it's all clickbait... he doesn't actually care)

      @golgothan@golgothan2 ай бұрын

    • lol@@golgothan

      @twmlloyd5257@twmlloyd52572 ай бұрын

    • Maybe you could turn a stick into a shovel next! or bend a bar into a hook!

      @HHI455@HHI4552 ай бұрын

  • Well that was a waste of my time. Just use a bigger Chinese spanner/wrench and spray with WD40? (PS You won't be able to hang your spanner up now).

    @njd2342@njd234210 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding209 күн бұрын

  • רעיון גאוני...כל הכבוד 🏆🏆

    @zadokmardo@zadokmardo24 күн бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding2023 күн бұрын

  • I just wasted precious minutes hoping to find something useful, unique or smart. For anyone doing that type of work and not having a chain wrench should not be doing such work.

    @ComoChingan-kb7ty@ComoChingan-kb7ty2 ай бұрын

    • Basically half assed butchered an old wrench. Should have cleaned the wrench up and oiled it. Then went a bought the correct tool

      @BillyG869@BillyG8692 ай бұрын

    • 3 minutes o& my life I won’t get back?!

      @waldenhouse@waldenhouse2 ай бұрын

    • Not everyone can go out and buy a new tool . I think it was a great idea and may make one .

      @rawpraisehorn@rawpraisehorn2 ай бұрын

    • FongKong shit(Chinese mods)

      @user-pl7vk1jo5j@user-pl7vk1jo5j2 ай бұрын

    • Yeah man. I thought that wrench can be used as it is. Not everyone can do a modification like that. Basically that hole is for hanging the tool itself.

      @robertclemente9753@robertclemente97532 ай бұрын

  • I looked up the owners manual to this tool and confirmed this exact step by step process . It’s written clear as day.

    @GeorgeFedake@GeorgeFedakeАй бұрын

    • If you turn that page over, it tells you how to make a donut out of a banana. 1) Throw the banana away and buy a donut. It's amazing and it works, I tried it.

      @upturnedblousecollar5811@upturnedblousecollar5811Ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

  • Good on you for making a tool that others would simply go and buy. I have a set of Vise-grip with a chain on it- the one you made will work just as well.

    @chuckcorden7397@chuckcorden73974 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding204 күн бұрын

  • A great secret, very simple and useful in practice

    @CreativeHop-ds8ns@CreativeHop-ds8ns16 сағат бұрын

  • Why not use an open end wrench that fits? This was a waste of my time and you will be receiving a bill for taking time out of my time bank.

    @2cartalkers@2cartalkers2 ай бұрын

    • Could not agree more

      @Anonymous-ff5wr@Anonymous-ff5wr2 ай бұрын

    • Or you can buy a bicycle tool that does the same thing, it's for the rear gear set

      @stephenboyd4934@stephenboyd49342 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding20Ай бұрын

    • Hello! thanks for your recommendation. Wish you all the best!

      @Alvawelding20@Alvawelding20Ай бұрын

    • Some people are so closed minded, this would really help on big jobs where there's a shortage of chain vice grips. As boilermakers we could make up as many of these as we needed because there's never a shortage of Cresent wrenches

      @alanmartyn3209@alanmartyn3209Ай бұрын

  • You made a chain tong. We've used them in the oil fields for years. Very handy.

    @nonyerbidness475@nonyerbidness4752 ай бұрын

    • A chain tong, ok!

      @LookupUnited24akaU24toHELP@LookupUnited24akaU24toHELP2 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

    • 那扳手的秘密不是這鍊條扳手吧*這算你改良出的但這也有不便的時候吧*改天用扳手時ˊ多個鍊條欸

      @a0970577350@a09705773502 ай бұрын

    • Chain tongs easier than throwing the chain 👍🏻

      @mrnull682@mrnull682Ай бұрын

  • Ha ! I knew that extra crescent wrench and bike chain would come in handy one day . ( very ingenious )

    @r.jameslefevre5179@r.jameslefevre5179Ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

  • Không nhiều người biết bí mật của công cụ này | Cảm ơn bạn chia sẻ sáng tạo hay

    @Tan.NhanLuc@Tan.NhanLuc7 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding207 күн бұрын

  • An absolutely brilliant tool. Not everyone has every tool size you could ever want. Simple and cheap it would work in most situations except where it’s just too coroded or tight.🇦🇺

    @raymondwelsh6028@raymondwelsh60282 ай бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding20Ай бұрын

  • Thanks for that idea I never would have thought about making a chain wrench out of an adjustable one. However when I was working I always carried a chain wrench in my tool boxes, I’m retired now. Good video.

    @wilburnbaker8204@wilburnbaker82042 ай бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding202 ай бұрын

    • why are you tired?

      @thethinkingman-@thethinkingman-2 ай бұрын

  • Clever! Now you only carry one wrench in the toolbox. Years ago, I worked in a custom fabrication shop. We modified tools all the time to fit job specific needs. We even had a bone yard of old worn-out power and machine tools that we would use to build custom job specific power and machine tools. It was a third-generation business; lots of old worn-out tools to tinker with.

    @davidphillips6189@davidphillips618926 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2025 күн бұрын

  • I award 10 points for making something that works……. I deduct 10 points for making an item that’s easily obtainable, doesn’t cost much and has already been invented ! 😂

    @adrianking4192@adrianking41922 ай бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding202 ай бұрын

    • I’ve been a welder fabricator for over 40 years and if it were possible to deduct points below the 10 I’ve already deducted, I would because you have taken a perfectly good adjustable spanner and ruined it

      @adrianking4192@adrianking41922 ай бұрын

    • Deduct another 10 points for damaging a tool. He's 10 points negative after trying to show off his skill.

      @dtang3288@dtang32882 ай бұрын

    • Maybe he is marooned on Gilligan's Island?.....:>)

      @largemember@largemember2 ай бұрын

    • @@largemembermaybe he could have fixed to boat.

      @halweiss8671@halweiss86712 ай бұрын

  • Old idea but new approach, great product

    @WeldingMask@WeldingMask2 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding202 ай бұрын

  • Well done it will do the job if you don't have another tool . Very inventive mate.

    @centurycity@centurycity11 күн бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding2011 күн бұрын

  • תודה איש יקר שאתה חולק את הידע שלך ללא תמורה כספית .אלקים יברך אותך

    @Pinto-ei3cs@Pinto-ei3cs23 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2023 күн бұрын

  • Muchas gracias por la recomendación. Se ve práctico el usarlo de esa manera

    @rodolfogarciamiguel3108@rodolfogarciamiguel31082 ай бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding202 ай бұрын

    • 😂

      @victormanuelperezgonzales5448@victormanuelperezgonzales54482 ай бұрын

  • I have gone to Home Depot pick up the right tool and came back before the video ended. 😂😂😂😂

    @drrous9917@drrous99172 ай бұрын

    • PENSÉ LO MISMO, O EN IR CON EL VECINO A CONSEGUIR UNA LLAVE MÁS GRANDE🤷‍♂️

      @fernando.nor.5524@fernando.nor.55242 ай бұрын

    • I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

      @Alvawelding20@Alvawelding202 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • realize also that other areas of the earth do not have home depots and Lowes to just go get stuff. Maybe this gentleman does not have the resources to go buy another wrench. People at times are quick to judge another especially over an imaginary boundary line. Good idea to the person that made this

      @davidpalen2543@davidpalen25432 ай бұрын

  • Soy de Coronel Suarez , Argentina , Herramienta modificada.. Muy bueno !!!

    @eduardomiguelschtre7136@eduardomiguelschtre71366 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding204 күн бұрын

  • Hola muy bueno gracias!!!Soy de Mar del plata Argentina.

    @ricardolazcano1894@ricardolazcano1894Ай бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding20Ай бұрын

  • Actually, that turned out better than I expected... bravo 👏 👏

    @Mick_Aus@Mick_Aus2 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

  • Well dam, I don’t have a bigger wrench but I do have a spare chain laying around! 😂😂😂😂

    @robertsoto9632@robertsoto9632Ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding20Ай бұрын

    • Doesn’t everyone have chains and grinders hanging around?

      @stanmans@stanmansАй бұрын

  • So, that's what I'm gonna do with that 12" of motorcycle chain I've been keeping all these years!

    @thumperjdm@thumperjdm23 күн бұрын

    • i would find a motorbike for it instead

      @roberttill3787@roberttill378722 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2021 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2021 күн бұрын

  • A bigger wrench would do it as the experts point out in comments, but this actually looks very useful for my present problem: getting the nut for the front shock absorber off a strut. Can't use heat, the nut is not of proper shape for a wrench (has some flat surfaces, special tool was meant to be used which i don't have). Definitely going to try this. Might have to weld the chain to the nut.

    @steinbauge4591@steinbauge459121 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2020 күн бұрын

  • Click bate rubbish - there is no secret to the tool when you cut it up and add new parts to make a chain wrench

    @peterturnbull9133@peterturnbull91332 ай бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding202 ай бұрын

    • You can buy it. But why not make it in your spare time. The satisfaction just comes from making something functional 😊

      @justinmatangi6406@justinmatangi6406Ай бұрын

    • @peterturnbull9133: In this context the word “ bate “ is spelt “ bait “. Educate yourself before you try and educate others.

      @Kingcarparpeggio@KingcarparpeggioАй бұрын

    • Agreed I have a bigger wrench and a chain wrench don't need to grind good wrench and steal kids bike chain

      @SerenityES@SerenityESАй бұрын

    • @@KingcarparpeggioWhy don’t you try rereading his post. He isn’t trying to “educate “ anyone. He’s simply pointing out the fact that the title was clickbait rubbish, in which case he’s quite accurate.

      @Guitarplayer724@Guitarplayer724Ай бұрын

  • "Wow, I never knew a simple tool like a wrench could be transformed into something so effective! This video taught me how to repurpose tools for specific tasks, saving time and money. Thank you for the valuable lesson!"

    @Alotipsalo@AlotipsaloАй бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

  • Interesting what you did. Your adapted tool reminded me of a Bike Cassette Removal Tool. I have one of those. 🚲

    @lg5819@lg581913 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2012 күн бұрын

  • Bacana usou bem a inteligencia que Deus te deu! Parabéns!

    @SomeOrquestraMusic@SomeOrquestraMusic15 күн бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding2013 күн бұрын

  • Truly amazed to now know the secret of an expandable wrench involves the cutting and grinding of it to a rather weird shape, I wonder if the manufacturers knew this also?

    @garfstiglz3981@garfstiglz39812 ай бұрын

    • the d-bag is also censoring critical comments, and spamming "Welcome to AlvaWelding" ♥️

      @golgothan@golgothan2 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

    • just another clickbait grifter... and censoring negative comments, btw

      @golgothan@golgothan2 ай бұрын

    • The manufacturer will gladly sell you a separate chain wrench, if expanding the usability of your Crescent wrench offends your sensibilities 😂

      @goldfieldgary@goldfieldgary23 күн бұрын

  • i'm in México..i think this is a wonderful piece of knowledge to have particularly if you're living in México where most anything can become a problem and this wrench would be the only one you have

    @luthereldredgeadkins2715@luthereldredgeadkins27152 ай бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding202 ай бұрын

    • Do AMERICA a BIG SERVICE and STAY IN MEXICO!!!!

      @largemember@largemember2 ай бұрын

    • Do me a favor and stay there!

      @82raptor@82raptorАй бұрын

  • Excelente trabajo, un consejO: hay que usar herramientas de buena calidad, buen acero.

    @guidogonzaleza.8070@guidogonzaleza.807017 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2015 күн бұрын

  • Χαιρετίσματα απο Ελλάδα. Ωραία πράγματα φτιάχνεις.

    @artemiosathanasiadis2124@artemiosathanasiadis212426 күн бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding2025 күн бұрын

  • Lots of criticism here, but I like the creativity.

    @sasquatch-7634@sasquatch-763414 күн бұрын

    • Thats a cast steel wrench. That little tang he left from the strong radius is no longer strong due to being compromised is ripe to break off and bust your knuckles 😂. In the time it took to modify that wrench he could have just went out and bought a bigger one. My father always taught me...."Use the proper tool and job will go easy"

      @SnowPiercer1975@SnowPiercer197513 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2012 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2012 күн бұрын

  • Magnifique idée ! ! MERCIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ! ! !

    @gindou4697@gindou46972 ай бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding202 ай бұрын

  • Nice job, I probably would've grinded down the bolt a bit if I didn't have a bigger wrench but kudos for the creativity 🍻

    @factsmachine2626@factsmachine262620 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2018 күн бұрын

  • Muy bueno y práctico, me gustó, desde Venezuela, voy de inmediato a reformar mi llave ajustable, nunca está de más, contar con esta herramienta,

    @JoseBrito-yl5mm@JoseBrito-yl5mmАй бұрын

    • Welcome to Alva Welding channel! Thank you so much for your support

      @Alvawelding20@Alvawelding20Ай бұрын

  • Your videos are always so uplifting and enjoyable.

    @AmazingSmart-ngth@AmazingSmart-ngthАй бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

  • VERY clever..! Nice. From California, USA :)

    @glennandrews7689@glennandrews76892 ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding202 ай бұрын

  • The hole on an adjustable wrench can be used to tighten C-clamps also.

    @sharkslayer9834@sharkslayer983414 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2013 күн бұрын

  • I think you are a genius.

    @charlesbaldo@charlesbaldo12 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2011 күн бұрын

  • I come from France, really good, thank you.

    @jeanuguet8440@jeanuguet844020 күн бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding2020 күн бұрын

  • I just have one of those in my toolbox, it's called a filter wrench and it doesn't require the destruction of a perfectly good shifter!

    @simonhawksley817@simonhawksley817Ай бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding20Ай бұрын

  • I reckon some times at that particular time don’t have the right tool for the job and I think at least he made a tool at the time at least he used his head I now that a lot of people don’t keep up the good work I like to see more of that stuff

    @DarrenGyorik@DarrenGyorik28 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2027 күн бұрын

  • I live in France. Thank you for your video

    @GRITONIX@GRITONIX21 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2020 күн бұрын

  • Soy de Nuevo Laredo Tamaulipas, México y me parece muy interesante la firma de uso de la cola de la llave inglesa

    @WillisAlarcon-ks2lv@WillisAlarcon-ks2lv16 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2015 күн бұрын

  • Alternatively, I've been able to remove the movable wrench jaw (unscrew it) and to file another tooth (with a triangular file, say) into the toothed "gear" surface of the jaw to enable the wrench jaw to open further (wider). The jaw becomes a bit weaker then against high torque forces of course when it is open to its new widest extent, but this modification can give you an adjustable wrench that is a little more versatile when it comes to the challenge of larger fasteners -- bigger bolt heads or nuts. I learned this trick over 50 years ago from my dad; everyone I've passed this mod on to since has been surprised they hadn't seen it anywhere else or heard of it before. It's great, because it works, tho' you SHOULD be careful not to use too much muscle on the largest-span stubborn fasteners (and sometimes, it helps to use a few drops of penetrating oil). Good luck! --Joe / Tucson ARIZONA / USA

    @W7DXW@W7DXW16 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2015 күн бұрын

  • Cool! And to think I’ve been doing it the hard way all these years using a stupid pipe wrench!

    @CitizenCarrier@CitizenCarrier10 күн бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding209 күн бұрын

  • Soy de Argentina, muy bueno !!!

    @victorpalo4803@victorpalo4803Ай бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

  • ok...thank you for this tutorial.... ini luar biasa!!!

    @boruskribokurus7611@boruskribokurus7611Ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding20Ай бұрын

  • I've bought tools like that! Didn't think of making my own.

    @jamesmskipper@jamesmskipper21 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2020 күн бұрын

  • I like the secret of this tool. Even though people who have angle grinders and a welder and a spare crescent wrench to cut up and an old motorcycle chain probably already have a pipe wrench or two.

    @atxatxatxatx@atxatxatxatx7 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding207 күн бұрын

  • Ooo I love a bit of grinding, but I have a chain wrench in my toolbox.

    @paulroberts5677@paulroberts567712 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2011 күн бұрын

  • Fine for people with an angle grinder, a metal cutting disc, a work bench, a vice on the workbench, a drill, an appropriate drill bit, and a very handy short length of bicycle chain. Or you could get a bigger spanner.

    @HowlinWilf13@HowlinWilf138 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding207 күн бұрын

  • That chain wrench has a lot of uses such as holding pulleys on tje front of engines when you are trying to break the bolt loose. Good use for a rusty old crescent wrench.

    @rickramirez4514@rickramirez451425 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2023 күн бұрын

  • チェーントンの代用品ですね。 ない場合はパイレンでも大丈夫だとほぼ素人の私には全て理解が出来ません。 発想は素晴らしいですが手工具は大事にしたいと思いますが、参考にさせて頂きます。 ありがとう🛠

    @BAGHUER@BAGHUER8 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding207 күн бұрын

  • WOW What an incredible idea I love it Good show

    @jimsutherland6538@jimsutherland653814 күн бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding2012 күн бұрын

  • Esse cara e um gênio

    @Romario1722@Romario17227 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding205 күн бұрын

  • I always wondered what that loop was for. Now I know it was meant for me to cut it off and use it like that. 🤷 Learn something new every day.

    @MyAsianFriend_com@MyAsianFriend_comАй бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

  • Your hook you ended up with is backwards for any real grip! Also the hole in the wrench you destroyed were for hanging the Crescent wrench on the wall, so it’s always handy where you needed it

    @richbadour6002@richbadour6002Ай бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding20Ай бұрын

  • Forget the mashup with the tool I'm more impressed with the view count!!

    @jackcameback@jackcamebackАй бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

  • Mantap luar biasa saya from Indonesia

    @jejenzainudin8082@jejenzainudin808224 күн бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding2023 күн бұрын

  • כל הכבוד. על הרעיון

    @avrahamhoshen7516@avrahamhoshen751624 күн бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding2023 күн бұрын

  • 自動車エンジンのオイルフィルターエレメントを外すのに使えそうですね！わざわざ専用工具を別に購入しなくても、今あるモンキーレンチの改造で出来ます！（from Japan）

    @user-ui1lw5zr8u@user-ui1lw5zr8u18 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2017 күн бұрын

  • Estupendo invento. Feliciadades. Enseñanza útil y muy práctica. Saludos desde Guadalajara.

    @emiliocaminomachado2398@emiliocaminomachado239819 күн бұрын

    • "Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

      @Alvawelding20@Alvawelding2018 күн бұрын

  • Absolute genius

    @normanjefferychester882@normanjefferychester882Ай бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding20Ай бұрын

  • That be a handy tool to have around.

    @timothylongmore7325@timothylongmore732512 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding2011 күн бұрын

  • I have a pipe wrench and belt wrench too 😊

    @whisunglee8585@whisunglee858512 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2011 күн бұрын

  • Best thing to EVER happen to a knuckle busting adgustable wrench. All mine went in the bush the first time they slipped and caused a drop of blood !

    @TomokosEnterprize@TomokosEnterprize7 күн бұрын

    • I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

      @Alvawelding20@Alvawelding207 күн бұрын

  • pipe wrench will work too but cool idea.

    @jsmcguireIII@jsmcguireIII17 күн бұрын

    • Welcome to my channel! Thank you so much for your comment! I will think about the improvement idea. have a nice day!

      @Alvawelding20@Alvawelding2016 күн бұрын

  • "wherever I go ..There I am" Me wondering how I ended up watching this.

    @jamessouza7065@jamessouza70656 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding205 күн бұрын

  • Interesting! The title is misleading because it implies that the hole was intended by the manufacturer for that use. Fabrication of a crescent wrench end into a chain wrench is what actually happened. I as a former mechanic have likewise fabricated tools at times, so kudos to Alva Welding for his creativity. I have used that end of a crescent wrench for increased leverage on a tight bolt by slipping the hole over a jaw of the open end of a combination open end and boxed end wrench. You can also use another wrench to do this by putting the boxed end of it over one of the jaws of the wrench being turned.

    @bman4737@bman47376 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding205 күн бұрын

  • Obrigado por compartilhar

    @danielkuze4076@danielkuze4076Ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @Alvawelding20@Alvawelding20Ай бұрын

  • You made a simple Set of Chain Tongs. Cheers from Michael. Australia.

    @michaeljohn7398@michaeljohn7398Ай бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding20Ай бұрын

  • Bien trabajo que desconocía saludo desde cuba

    @jorgeluisgonzalez4713@jorgeluisgonzalez471320 күн бұрын

    • Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

      @Alvawelding20@Alvawelding2018 күн бұрын

  • I'll give you points for drilling through hardened steel. although I'm guessing it took about 15 drill bits.

    @curt3548@curt354816 күн бұрын

    • Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

      @Alvawelding20@Alvawelding2015 күн бұрын

  • I personally don't have the time, so I just went to Harbor Freight and purchased a set of vise grips with a wrap around chain. Besides, that looked like it could easily break and bust a few knuckles.

    @HiTechDiver@HiTechDiver17 күн бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @Alvawelding20@Alvawelding2016 күн бұрын

  • Genius❤

    @user-ck2hw8vz2z@user-ck2hw8vz2z5 күн бұрын

    • Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

      @Alvawelding20@Alvawelding204 күн бұрын

  • Always have a proper tool for the job.

    @JimDog794@JimDog79412 күн бұрын

    • I understand that you didn't find this idea helpful, and I appreciate you sharing your perspective

      @Alvawelding20@Alvawelding2011 күн бұрын
KZhead