Best Tool Demo at SEMA 2023 from Bad Dog Tools
2023 ж. 3 Қар.
269 017 Рет қаралды
As always, I appreciate you all for watching!
Check out Jamie's Store!: ourwearhouse.com/collections/...
As always, I appreciate you all for watching!
Check out Jamie's Store!: ourwearhouse.com/collections/...
This is the worst company in the world to deal with!! They do not replace the bits for free And the bits don't last at all. Buyer beware
Explain
@cbrasil2780 lol bits are shit (it's a piece of carbide braised into the tip of the drill bit with no Rhyme or Reason or quality control) only lifetime warranty if you pay to replace them that's a joke, customer service is terrible
@Christopher-bh4gx Do you mind a summary of your experience? I was going to get them for work, but im not sure about spending money on them. Thanks
@NotABot88 read there google reviews. Not too many people have a good experience with these bits
@NotABot88 I promise look up reviews. It's the worst
Had those bits myself, there fucking garbage, company makes you pay for shipping for warranty, horrible customer service. Go to the local hardware store, buy any drill bit and learn yourself about relieve angles and cutting edges, youll use your bit till its wore out if you can sharpen em
That little ASH block ain't going to do nothing to that bit, forget how strong the bit is.
When something looks too good to be true it usually is.
that dewalt seems to work pretty well, even with poor quality bits 🤷
with a big enough motor and force you can drill a sharppy into all that.
They charge shipping for the warranty claims.
And a surcharge $10 if ur Canada
@wendigo.93 Well that makes their entire claim a scam since shipping is more off a hastle and more expensive than buying a new twist drill
How much could it possibly be to ship a tiny little drillbit? They can’t wait any more than an ounce or two if that.
so ?
Seems too good to be true. Reading the comments, appears like it is just that. The demo guy is probably using a limited run of bits they made specifically for demo purposes. Stronger with better materials mixed with a little slight of hand training for the demo guy, and you get what appears to be an indestructible drill bit. Then you buy some and realize the bits can't do most of what you saw in the demo. Good luck getting a refund or replacement. Rule of thumb at trade shows, if they are just showing you something work, it's likely BS. If they hand the product to you and let you do whatever, there's a much better chance it's legit.
Where do we get the demonstration box then?
@@herlegz6969 If you really want some of the demo bits, convince the guy that you're an "influencer" and maybe they'll send you some of the bits they use for demo purposes. But I doubt it. My bet is that the bits get swapped out a couple of dozen times a day during trade shows to keep them fresh. Even the upgraded bits won't do what he's showing them do for very long.
Thank goodness for video reviews! I WAS gonna buy some after watching this.
thank you comments!!! i love yalll!
A KZheadr tested them they are junk there grinding blade is good tho
i just bought a 115 piece cobalt drill bit set from harbor freight, after the sale price of $90, convinced it is the absolute best value for the money I could find for cobalt bits.
Finally the bit for all my rotor drilling needs.
No it's a scam
@@pineapplesideways3820Which do you recommend fir drilling rotors? 😂
A material that is both extremely hard AND flexible and has no drawbacks? X doubt. There is a reason specialized tools exist and they are not made by dummies who accidentally forgot about the magical unicorn material shown here :D
Im sure they were selling them at the show, would have been interesting to buy a set and have him use one of them to demonstrate. See how long the consumer sets last and if he replaced any that broke or dulled.
One of the things that made me start to feel old is when I hear about a badass warranty like that I get really interested in the product 😂
Now let me see you drill through some 1/8 of an inch aluminum.😂
😅
That’s a 500 dollar diamond but he’s using. You won’t be getting that lol.
Well , I was going to look them up online to buy some but not after all the bad reviews!
This is what youtube is all about..... the comment section!
Man has personal beef with that brick💀
I brought these, was sold on them drilling different materials, they are a good masonry bit but suck for all other materials and break/melt easily.
Those lungs are going to love those metal and silica particulates up in there.
Where is the link..
baddogtools.com
Scam
TylerTube - I tested the WORST Drill bits ever made!
The dude wearing Milwaukee gloves and a DeWalt drill knows what hes doing to stir up the pot
That poor quick change chuck 😂
Honesty and a guarantee will always succeed AE warranty
I wanna see the reinforced red bricks against it
Milwaukee gloves with a dwalt drill lol
There is a reason we use different bit styles to cut different materials. Its because different materials require vastly different cutting methods. If it were possible to design a bit that did what this man claims, every major bit manufacturer would be doing it. It would be an unbelievable profit increase. Tool down every plant to run one syle of bit, downsize workforce to match. Sell a similar volume of bits as previously sold at a slightly higher price. If it sounds too good to be true... it is.
Yeah what’s the warranty really say. Cuz I handle inventory and deal with a lot, if it breaks do you really buy it?
Or get the Proper Driller for it, which is gonna last longer and most likely will do a better or (less messy drilling hole
Beware of show demo's bought a set of drill. Bit that could drill thru the shank of a grade 8 bolt with no center start hole time after time , the set that was shiped to me wouldn't do it!!
Lots of us didn’t make it to sema. Who manufactured these drills?
How much pressure is being exsherted on that tool just to drill
Love to see how this is fluted
Uhhh A LINK WOULD HAVE BEEN NICE
What store do they sell
Do not buy from this company. When you inevitably have to warrant one, their customer service is terrible and they charge you for shipping.
I have no experience with the company or product - but of course they are going to make you pay shipping …
@@Bwill-hn2pc Shipping both ways. You have to send the damaged bit in. All said, about $5- $6 for one bit plus wait time of ???...Garbage warranty. They count on people not going through the hassle. If they were as amazing as they SAY...shipping would be free, because nobody would need to use the warranty...
*He’s low key sharpening it every time it touches the cement!!*
I work maintenance and I want a set of these bits..ho do I find them..link?
Those bits are pure trash but that drill is the real champ of this video
What happens when you need to sharpen them? Bad temper make them blow up?
Everyone saying they make you pay to replace them but no one saying how much. Can someone list a price?
I need them
Its good to be true
It is
The one that you get will not do this! Ask for the one they use for the demo!
Milwaukee gloves and DeWalt tools
Machine shop love them lol
They flog those of in Australia under a different name
Link 🔗
Yes I liked my own comment
www.baddogtools.com
@@JamiesGarage1 thanks
@@JamiesGarage1 stop promoting that scam product
Please cut through an RSJ behind 1/2inch ply behind brick behind. . 8mm hole size. 120mm deep.
I want to see it drill through a bed frame
Sorry guys, here’s the link if you want to check them out. www.baddogtools.com
I can't figure out how to go to that address. Getting old sucks.
@@K9River you are joking right?
@@riba2233 Nope. Not in the least bit.
@@K9River oh boy. Have you never entered a web link into the address bar of your browser?
@riba2233 I have. But I noticed that the op edited the link so that it actually works. I wish he would've made a reply noting that so we didn't have to argue like a couple of fuckwits.
can I drill the brake rotors in my brand-new BMW?
Cheat code for drilled rotors 😅
Sure, what’s the worse that could happen 🤷♂️
Milwaukee gloves and Dewalt tool lol
WANT!!
When they say ‘cut masonry’ hmmm you just know, that they don’t know how tools work
Don't companies know they can't BS anymore!
Try using those bits on rails … the samples are nothing harbor freight can do that
As much pressure ur puttin on it of course its gona go through it
Who is the company?
Who makes the drill bits
china
Lemme chuck this in my mill and then we'll see how strong they are...
🤩🤩🤩🤩🤝🏻🤝🏻🤝🏻👍🏻👍🏻👍🏻👍🏻👍🏻
he isnt drilling he is pushing them trough
So you can just push through metal? 🤔 wasn’t aware of that
@@Jsarabia94 well now u know
Holy camoly not sure what this manufacturer is trying to show off but no one drilling rotors gives af about drilling concrete with the same bit. Welcome to material science, you made a drill bit with a cutting edge harder than what it’s drilling wow. Feel bad for whatever salesmen has to go pump this thing like it solves any problem.
They're super expensive.
The hats out the bag, every video on the drill bits are saying they're hot garbage in the comments. No thanks.
WHO MAKES IT..!
Name?
probably at the price of your first child!😂
...is it BOSCH????, BOSCH it's great!!!!
The have the toughest best made but ever at the show then the ones they ship out are nothing like them
Thats impressive
What would be good is if all the crap at the bottom of the video didn’t block what we are supposed to be watching
300 bucks a set id hope so
Sure is a soft block...
They don’t replace them sadly. In fact, they don’t have customer service people, or a department. Want a bit replaced? Hire a lawyer. That’s your only shot.
To add, thanks for not showing their name clearly or mentioning it/cutting it out. It’s some seriously shady shit lol, 40 foot pole.
Should I drill a hole in my engine
Seriously don't let these people scam you. Watch any video on KZhead about this companies products. Here's a summary: they suck.
I thought people had evolved beyond beliefs in snake oil as seen on TV shit.
Wow. I saw the video. I was like I have to get it. But reading this comment are changes everything.
That companys customer support is worse than trash.
Bought a set of these drillbits at Sema show 2005. The tips chip off and they don’t last 👎🏻
These bits are the apprentice scam they all fall for.
Why does he have to press so hard? The drill bit is always supposed to do the work for you,*red flag*
How much
Everytime I see these featured from an expo, every comment is “it’s a lie, they’re a fake, they won’t replace S**t, horrible company to deal with, CS sucks!!” LOL😂
a drill from a 5€ LIDL set does that......
Am I the fool? I just use a bit for everything anyway.
Snake oil
so free replacement whenever its dull?? Sounds fair
Plus shipping.
Link doesn’t work
Go to www.baddogtools.com
WTF, i need one
Worst drill bits out there
Ft💞🙃
These demonstrations are getting a little Chinese
I’ll take 50
LINK!!!!
www.baddogtools.com
Milwaukee gloves, dewalt tool, gimmicky bit, wtf
LINK!!!!!!🎉
www.baddogtools.com