KZhead
Ғылым және технология

QUICK AND SIMPLE BOX , done under 30min, great beginner project that sells fast....🤗

Tomislav Tomasic Woodturning (Dodir Drva)
2023 ж. 9 Нау.
56 698 Рет қаралды
Жүктеу

Got this idea from @CraftSuppliesUSA , Great beginner project that sells fast and it has pretty much every cut that is on cross grain orientation.....
Hope you'll make one as well....
Enjoy
#recordpower #woodturning #bowlmaker #boxes #entertainment #asmr

Пікірлер

  • Beautiful work. The only thing missing now is Mr. Raffan’s colored sock. Thanks for all your video demos. They are truly inspiring. Jon.

    @jonathanflynn9467@jonathanflynn9467 Жыл бұрын

    • Thank you Jon🤗 your words are inspiring to me.... And that sock should be in museum, since it can stand up on its own😂

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • nice work and not a word spoken, beautiful. I like the button details inside the lid and on the base, very neat idea.

    @stevehood10@stevehood102 ай бұрын

    • Thank you very much 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning2 ай бұрын

  • I saw the Mike Nish/Craft Supplies video as well.......yours is a beautiful interpretation of that idea. Love how you addressed the knob....very nice!

    @leftymcshea6876@leftymcshea6876 Жыл бұрын

    • Thank you Lefty🤗 glad you liked it ☺️

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Lovely work! Sir, you have the best tool control I have ever seen!

    @anthonyvilgiate6711@anthonyvilgiate6711 Жыл бұрын

    • Thank you Anthony.... your support means a lot 😀

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Definitely Richard Raffen and yourself are the best educators of wood turning on utube and thank you 😊 cheers Phil 🔨🪚👍

    @anirishwoodworkersdiary2137@anirishwoodworkersdiary21376 ай бұрын

    • Thank you, glad to be of help.... Thanks for watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning6 ай бұрын

    • No, Richard Raffen talks, speaks, instructs. Saying nothing definitely does not make you an educator.

      @DennisDolan-fl3mw@DennisDolan-fl3mw21 күн бұрын

  • Another lovely project.

    @anthonygreen9609@anthonygreen9609 Жыл бұрын

    • Glad you liked it Anthony, thanks for watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Beautiful work.

    @glennconstable3789@glennconstable3789 Жыл бұрын

    • Thank you for watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • With every video, you continue to impress me. I know you have said in past videos that Mr Richard Raffan was your mentor. I’d bet Richard would say that you are certainly on his level of skill. Excellent as usual sir.

    @k9insomniac783@k9insomniac7836 ай бұрын

    • Thank you for binge watching my videos,I really do appriciate that sir....

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning6 ай бұрын

  • Well done on tool control!

    @arlineastman@arlineastman4 ай бұрын

  • The beautiful sound of sharp tools!

    @crackerjack3359@crackerjack335911 ай бұрын

    • Thank you sir

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning11 ай бұрын

  • Very nice job Tomislav, thanks for sharing, Chris

    @WoodScamp@WoodScamp Жыл бұрын

    • Thank you Chris for support and watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Nice box. I like the handle on the lid.

    @MPLMWorkshop@MPLMWorkshop Жыл бұрын

    • Thanks 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • I am also a great fan of Richard Raffan , but I thoroughly enjoyed your project. Well done. Paul

    @pouldes@pouldes Жыл бұрын

    • Thank you Paul, glad you liked it ☺️

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Great job 👏

    @gerrychauveau2925@gerrychauveau2925 Жыл бұрын

    • Thank you Gerry very much 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Very good, love the handle on the lid, very unique.

    @DennisSuitters@DennisSuitters Жыл бұрын

    • Thank you very much 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Great job

    @seamusoconnor615@seamusoconnor61511 ай бұрын

    • Thanks 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning11 ай бұрын

  • WOW!! So glad you were not injured or nothing was damaged in the shop. Before you started, I thought that piece looked pretty solid. I will check the wood I put on the lathe more thoroughly now, seeing how that came apart so quickly. Thanks for sharing this important safety video! 👍🏾

    @gregjohnson8486@gregjohnson84868 ай бұрын

    • No problem, thanks for watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning8 ай бұрын

  • Well done!

    @scottfonner@scottfonner Жыл бұрын

    • Thank you very much 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Wonderful work

    @SilverBack.@SilverBack. Жыл бұрын

    • Thank You very much 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Nicely done Take care Cheers Harold

    @hfbowerndesigns810@hfbowerndesigns810 Жыл бұрын

    • Thank you Harold 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Very smooth with smooth techniques. Congratulations on your beautiful work. Said

    @saidchoucair9247@saidchoucair9247 Жыл бұрын

    • Thank you Said very much.....👍

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Pekná práca Tom... 👍👍👍👍✊✊✊✊✊✊

    @marcelsimun6282@marcelsimun628211 ай бұрын

    • Thank you 😀

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning11 ай бұрын

  • great job

    @MarkThompson-ms5wn@MarkThompson-ms5wn Жыл бұрын

    • Thank you 😉

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Super svaki tvoj video... 👌👏👏

    @vedrankrizmanic4996@vedrankrizmanic4996 Жыл бұрын

    • Hvala puno 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • great work

    @ConfusionWood@ConfusionWood Жыл бұрын

    • Thank you very much 😀

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Wonderful! Is that wood what we in Texas know as sycamore? It appears to have a similar interlocking grain. The efficiency with which you shape a piece is on par with Richard Raffan. Very impressive.

    @StraightThread@StraightThread Жыл бұрын

    • I believe it is, or extreamlly similar....☺️ Richard is my mentor so a lot of similarities are present 😉 Thank you for support and watching 🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Recently got my first lathe, and I have been watching a couple of your videos. Great content :) How did the chuck hold the lid when you did the second side?

    @torvaga@torvagaАй бұрын

    • Congrats on the lathe, enjoy your time with it 🤗 I hold the lid by expanding into small ridge on inside☺️

      @tomislavtomasicwoodturning@tomislavtomasicwoodturningАй бұрын

  • Nice 😘

    @kevinburrows735@kevinburrows7355 ай бұрын

    • Thank you

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning4 ай бұрын

  • I picked up a bunch of dry, air dried wood from a club member who is retiring and it seems to just turn different than the kiln dried wood I've been using for boxes. The kiln dried cherry I have been using tears out whenever I even think about scraping. But this cherry I got from the club turns like a dream and is shiny off of the tool. Am I insane or is this a known thing? Great little box by the way!

    @matthewwright57@matthewwright57 Жыл бұрын

    • Thank you Matthew, no you are not insane, kiln dry stuff can be brittle, it had to do with forse drying..... I try to avoid if I can kiln dry wood as it does not work all that clean from tool..... With air drying,there is a longer drying time but well worth it....

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Hello, I love this video very much and would like to try. Could you tell me what scraper are you using? I don't have it and don't want to buy the wrong one (especially regarding the grain orientation). Thanks!

    @ValentinaFaussone@ValentinaFaussone5 ай бұрын

  • How did you stick the wood on at the start?

    @katharinecrumpton6314@katharinecrumpton63142 ай бұрын

    • I use screw chuck as much as I can ☺️

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning2 ай бұрын

  • Very nice box you turned, what are you putting on with the rag

    @mikemorris3559@mikemorris355910 ай бұрын

    • Thank you very much, its linseed oil and then beeswax on top, very nice and soft finish🤗

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning10 ай бұрын

  • Is that oil you apply followed by the carnauba wax?

    @Mark-jd1fr@Mark-jd1fr5 ай бұрын

    • Yes it was, after just straight beeswax

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning5 ай бұрын

  • If you can remember , What the moister count was on this, It seems that all my wood is too dry. Thanks

    @chuckandjanegoodguys2451@chuckandjanegoodguys24513 ай бұрын

    • Around 8% give or take, what do you mean with that you have too dry wood?

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning3 ай бұрын

  • Nice work on your channel. What would be cool is to identify each tool by grind angle etc in text on screen as you go. As well as finish. is that Bees Wax?

    @NativeEarthlingAI@NativeEarthlingAI10 ай бұрын

    • Thank you, helpfull suggestion 😀

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning10 ай бұрын

  • Wonderful work. How do you keep your tools so clean? Thanks.

    @woodbutcherjc@woodbutcherjc5 ай бұрын

    • Thanks 😀 not sure what you mean with clean? did you mean sharp?

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning5 ай бұрын

    • @tomislavtomasicwoodturning No'sir. They just always look clean, as in like you wipe them down each use or something. Do you wipe them with a denatured alcohol & rag. Sounds like a silly question, but mine just don't seem to remain as polished and bright looking as yours.

      @woodbutcherjc@woodbutcherjc5 ай бұрын

    • @@woodbutcherjc not silly question, I never clean them but I do use between sharpening a used 240grit sandpaper to polish a bit of flute near cutting edge.... You might use timbers that stick to metal more then others.... example is plum, atleast ones I have here likes to stick on gouges and its hard to clean....

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning5 ай бұрын

    • @@tomislavtomasicwoodturning Thanks, I'm going to try that out. God bless.

      @woodbutcherjc@woodbutcherjc5 ай бұрын

  • Tomislav, I can not understand how you mount the piece on reverse at minute 8’26”. Is it by expansion with the jaws? Thanks ☺️

    @ValentinaFaussone@ValentinaFaussone4 ай бұрын

    • Yes Valentina,jaws expand on small recees inside the lid that looks like decoration ☺️

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning4 ай бұрын

  • Whatever idea you got in the beginning, I wish you would have showed that better. Couldn't tell what you did. It was Too Fast

    @bobeven2093@bobeven2093Ай бұрын

  • Конструкция крышки не очень, в паз будет попадать например сахар или соль и забивать его, вычистить его из паза проблематично, я это давно прошел , края вазы Клаб ровными а паз только в крышке, так практичнее, если вам интересно мое мнение

    @user-ii2zm7fc4d@user-ii2zm7fc4d8 ай бұрын

    • Thank you,most lid and boxes that are cross grain I do with everything on the lid,this one was a bit different 👍

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning8 ай бұрын

  • What kind of wax is that block of wax that you apply to the piece? It looks darker than the beeswax that I am used to. Who is your supplier?

    @tomhoffman8873@tomhoffman8873 Жыл бұрын

    • Not sure why is grey, I believe it has something with standing on a shelf...its a healthy food store that sells it here in Croatia 😀

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

    • Just a confirm, it is beeswax not carnuba wax correct?

      @tomhoffman8873@tomhoffman8873 Жыл бұрын

    • @@tomhoffman8873 that is correct, just beeswax 😉

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • Superbe …gouges à profiler utilisés ? J aimerais mieux voir les gouges, et l affutage ..😮😮

    @bprades@bprades Жыл бұрын

    • Thank you 😀 I have video on sharpening as well

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning Жыл бұрын

  • You know he is audio recording. You can hear the lathe and the tools cutting. Why can't he talk to us? Tell us what tools he is using.

    @DennisDolan-fl3mw@DennisDolan-fl3mw21 күн бұрын

    • Good one, try few videos after that as I do start to talk....

      @tomislavtomasicwoodturning@tomislavtomasicwoodturning21 күн бұрын

  • Phone number dyna

    @joginderdahiya9580@joginderdahiya9580Ай бұрын
KZhead