Brake caliper repair [AUTODOC TUTORIAL]
Brake caliper repair [AUTODOC TUTORIAL]
🛒 Visit our website: www.autodoc.co.uk/?...
Brake caliper repair kit - www.autodoc.co.uk/car-parts/b...
🛠️ You'll need:
Brake calipers - www.autodoc.co.uk/car-parts/b...
Piston, brake caliper - www.autodoc.co.uk/car-parts/p...
Guide sleeve kit, brake caliper - www.autodoc.co.uk/car-parts/g...
WD-40 - www.autodoc.co.uk/wd-40/13563...
Brake fluid - www.autodoc.co.uk/car-parts/b...
Tool kit - www.autodoc.co.uk/tools/set-o...
LIQUI MOLY Fast Cleaner - www.autodoc.co.uk/liqui-moly/...
Guide pin grease - www.autodoc.co.uk/trw/2204964...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC App - interstitials.onelink.me/1036...
⚡ All video and PDF tutorials on parts: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/br...
🔔 Subscribe to the AUTODOC channel so that you don't miss the latest videos on car parts replacements ➜ kzhead.info?s...
00:00 - Brake caliper repair kit: step-by-step changement tutorial
00:20 - To carry out the replacement you will need the following
01:00 - Look at the design and fasteners of the brake caliper
01:29 - Unscrew the brake caliper fasteners
02:55 - Pry up the boot and slide it off, then demount the piston
03:36 - Put the caliper in the container and connect the brake hose to it
04:35 - Check the condition of the piston and caliper
05:32 - Clean the brake caliper body and all mounting seats
07:00 - Apply some lubricant on the seal
08:11 - Reinstall all the elements that were removed
09:25 - Make sure that all connections are clean
10:48 - Tighten the bleeder screw and disconnect the equipment
11:20 - Tighten the wheel fasteners one by one in a criss-cross pattern
If you're interested in our content, you can watch our other video tutorials:
► How to change brake caliper repair kit tutorial - • How to change brake ca...
► Car part replacement | Universal videos from AUTODOC - • Car part replacement |...
Mobile shop: m.autodoc.co.uk/?Y...
📢 Find AUTODOC on social media:
Instagram: instagram.com/autodoc_auto...
Facebook: / autodoc.de
KZhead: / autodocuk
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2022 AUTODOC AG All rights reserved
Thanks for watching! Write in the comments if this video was helpful 💬 Don't forget to subscribe to our channel and click on the notification bell 🔔
@autodocuk what lubricant is used for installing the piston?
Great video, I like the longer format.
Çok teşekkür ederiz güzel çalışma olmuş eline emeğine sağlık 🇹🇷🤦👍👏
Best tutorial ever thanks, learned a lot.
Remove the background sound
That’s not sound, it’s music run backwards, they paid $$ for it.
Turn the volume down😂😂
Great tutorial
Good 👍 👍👍
In meiner Lehrzeit gedacht, ich könne Bremsflüssigkeitswechsel und Bremsbelagstausch gleichzeitig machen bis der Kolben ungewollt fast auf die selbe Weise rauskam 😅
Hi, do we have to pump the break first so the piston pushes against the pad and then crack the bleeder valve or can we just do it how you have, ie let the fluid trickle into the caliper and just bleed? I'm confused cos on another video the guy pumped the pedal first and then cracked the bleeder. Thanks
Yes, you need to start by pumping the pedal so that the piston presses against the pad.
@@autodocuk hey thanks for replying! So just to confirm, after installation, we pump the pedal till firm, crack the bleeder valve so that there's a steady trickle of fluid and then close and bleed as normal? Is that correct?
How come you let the fluid trickle through first and then pumped? Are both ways correct? It's first time I'm doing it that's all
Nice job Autodoc!!!!
Hello! I am planning on doing this to mine, but how do I get new seals and all that rubber sealing for the calliper?
Contact our Customer Care team and we will definitely try to help you. Our Customer Support team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC
Good
Thanh you share clip
Thanks for your positive comment! Stay with us!
You did not show how to remove and install the lock ring of rubber booth. Too bad
Cleanespd my grooves with vinegar 14 hours n salt.... Then I used a hair pin and went around in a circle and got all the rust out of the grooves before installing the importance
We are sure that your comment will be useful to many of our viewers.
2:20 Its preferable to use a greese gun to remove the piston. Greese is non-compressible, so the piston just sort of slips out, instead of popping out like a cannonball. Much safer that compressed air, or messing about with brake fluid. Though also requires some cleanup.
We're sure your comment will be helpful to many of our viewers.
Tightening alloy wheels with an impact driver, tut tut
Not good video 📸 . It is just music 🎶 .