KZhead

Restoration Genius The Genius Boy Restores The Hitachi 3 In 1 Woodworking A 1500A For Carpenter

Restoration Product
2023 ж. 26 Шіл.
2 741 524 Рет қаралды
Жүктеу

★ Contact Me: wtgroupvn@gmail.com
Restoration Genius // The Genius Boy Restores The Hitachi 3 In 1 Woodworking A-1500A For Carpenter
Hello everyone.Welcome to the channel: Restoration Product !!!!!
In this episode we found a very big and heavy 3-in-1 table saw. and no longer works. The height and width of the machine are adjustable. We worked hard for many days. I did my best to show all the work and I am sure that my method will be improved in future videos. I think all the hard work on this project will get this mortise machine working again. Our mission is to entertain and give you the opportunity to discover forgotten tools. Please subscribe to my channel so you don't miss anything. ...Thanks for watching and supporting me..... I really appreciate this! Thanks a lot!!!

Пікірлер

  • This is such a fascinating piece of equipment, if it had been done correctly. Never paint your feed tables or planer knives, or saw blades, that just creates drag and it’s gonna wear off quickly anyways. Also I’m glad you didn’t lose fingers when the jointer kicked back. Make yourself some push sticks, your safety is worth the effort.

    @cm5838@cm58385 ай бұрын

    • Thank you for your comments, we have learned a lot from you. We invite you to watch our next videos

      @restorationproduct1718@restorationproduct17185 ай бұрын

    • @@restorationproduct1718 please remember that wood working machines can take your fingers or hand off before your brain even knows something went wrong, it just takes a fraction of a second.

      @cm5838@cm58385 ай бұрын

    • That jointer taking of half an inch off was scary. VERY SCARY. I wanted to comment the same, "congratulations on not ending up injured. Please be safe, there is no shame in it"

      @musthavechannel5262@musthavechannel52623 ай бұрын

    • I agree. I cringed every time you ran your hand over that jointer blade. Then I jumped when it kicked back in your second pass. Please be careful!

      @JJPetro@JJPetro2 ай бұрын

  • Jesus, when you did your test cut the cutterhead was 1/4" higher than the outfeed table... you're lucky you still have hands.

    @jonq8714@jonq87143 ай бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct17183 ай бұрын

  • Green plant under the machine during the lift made me smile 😉😉😉

    @terhebbat158@terhebbat1589 ай бұрын

    • Thank you. Everything is very natural, no staging

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • And not a single cobweb lol

      @AuWoodStock@AuWoodStock2 ай бұрын

    • ​@@restorationproduct1718 LOL 😂

      @ajwalou-nack2343@ajwalou-nack2343Ай бұрын

    • @@ajwalou-nack2343 LOL for real

      @timw.5030@timw.5030Ай бұрын

    • I love how it was found in a garden that had the same wall.

      @ultimabear@ultimabear11 күн бұрын

  • My man almost lost his hand at 54:33....jesus. Good on you putting this back in operation but it was almost your last rebuild.

    @giffasmail@giffasmail2 ай бұрын

    • We are also very lucky, and learned a lot from this machine

      @restorationproduct1718@restorationproduct17182 ай бұрын

    • @@restorationproduct1718Except how to use a push stick. You immediately repeated your mistake. You're not going to have all your fingers for long.

      @R.Daneel@R.DaneelАй бұрын

    • @@R.Daneel wrist

      @Budvb@BudvbАй бұрын

    • It's because he was using the planer incorrectly by removing nearly a centimeter of wood at a time, which led to a kickback, and they nearly lost their fingers.

      @mstepuch@mstepuchАй бұрын

    • OMG!!!! I can't stop laughing🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

      @robinhood7401@robinhood7401Ай бұрын

  • I love how they're always randomly finding machinery in the weeds😅

    @adamnickels8117@adamnickels81179 ай бұрын

    • We have searched for many days to get such a product, thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Kkkkkk é verdade

      @marcelinosanchez9413@marcelinosanchez94133 ай бұрын

    • By putting them in there for views. It's clear that the lathe didn't sit there for long - just long enough for you to drape a few vines over it. And why? It's and interesting video without the deception.

      @R.Daneel@R.DaneelАй бұрын

    • When they lifted up the machine at the start, the ground had grass underneath it, still green & fresh.

      @loosemink@looseminkАй бұрын

    • Right , and the ground underneath was totally undisturbed when they picked it up with the sling !

      @jagitmax@jagitmaxАй бұрын

  • Para mi es una satisfaction enorme ver trabajar a una persona inteligente como lo es Este joven, FELICITACIONES POR TU BUEN TRABAJO!!!

    @dariomoreno2216@dariomoreno22169 ай бұрын

    • Gracias por mirar, tenemos más videos geniales por delante.

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • КЛАСС!!!, ЭТО ПРОСТО ОТЛИЧНАЯ НАХОДКА !!!, ЧУДО А НЕ СТАНОК!!! ПРОСТО СУПЕР!!!

    @user-bf7ho5mo4w@user-bf7ho5mo4w5 күн бұрын

    • 👏👏👏👍👍

      @restorationproduct1718@restorationproduct17185 күн бұрын

  • Молодец, очень хорошая работа. Успехов в труде.

    @basimihaj5763@basimihaj576327 күн бұрын

    • 👍👍👍👏👏

      @restorationproduct1718@restorationproduct171827 күн бұрын

  • В конце видео я замер- не делай так никогда! Используй подаватель для продвижения заготовки.Запасные пальцы в магазине не продаются.

    @user-uo8px3tf5h@user-uo8px3tf5h9 ай бұрын

    • Спасибо, что напомнили нам, нам очень повезло, что у нас не было неприятных инцидентов.

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Just who and why would anyone abandon such a valuable piece of machinery

      @BRI33NOR@BRI33NOR3 ай бұрын

  • It must be amazing to live in a country where you can casually find heavy machinery in the woods. And twice amazing in a rather poor country where any metal is looked for and sold for scrap. Even more amazing, this machine has been resting for months or years outside in a tropical/monsoon environnent and the wooden pieces have not rotten. Great restoration though (except for the makeshift at 37:50) of this machine.

    @marinoceccotti9155@marinoceccotti91557 ай бұрын

    • Thank you for your feedback, please watch our latest videos

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • Вы настоящий мастер своего дела! Разобрать и собрать, и чтобы еще работало это дорогова стоит. У меня получается только разбирать 😊. Респект вам как специалисту! 🎉🎉🎉

    @adrina72@adrina72Ай бұрын

    • Спасибо большое, у нас есть много других интересных видео, на которые вам стоит обратить внимание и посмотреть.

      @restorationproduct1718@restorationproduct1718Ай бұрын

  • Nice work. Be careful not to get your fingers cut off!! The machine looked great and worked well at the end.

    @officecrazy7@officecrazy79 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • You saw that too eh!! Wow, almost lost the fingers plus and arm.

      @thermos750@thermos7505 ай бұрын

  • I have watched many of this kind videos but honestly this one was more perfect and in detail

    @RestorationVideo@RestorationVideo9 ай бұрын

    • 😜😜😜👍👍👍

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Такое оборудование, в полной комплектности, в кустах. Я бы съездил забрал с удовольствием прямо из кустов, можно даже не реставрированное))

    @user-os1xx1vi7x@user-os1xx1vi7x9 ай бұрын

    • Было бы напрасно не представить их и не привести в действие.

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Very Good Job Brother 👏👏👏👏👏👏 Excellent. God Bless You Because You Are Work Hard For Your Family

    @alshaa1699@alshaa169917 күн бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct171817 күн бұрын

  • I use to do that for a living. I could get 80% of new price on a rebuilt machine. Worked better than new. Old heavy machines are the best!!

    @TonyA-ov4qu@TonyA-ov4quАй бұрын

    • Thank you very much, see you in the next videos

      @restorationproduct1718@restorationproduct1718Ай бұрын

    • I also fixed and restored all kinds of tools and machinery of all makes and models both electrical and pneumatic.

      @dankoston2904@dankoston2904Ай бұрын

  • Très beau travail de restauration,bravo, à bientôt salut Jeannot ⚒😉

    @jeanloreaud9282@jeanloreaud92829 ай бұрын

    • Merci d'avoir regardé et de vous être abonné à la chaîne

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Happy to see restoration of from old to new.good efforts. God bless you.

    @muhammadaliqureshi859@muhammadaliqureshi8599 ай бұрын

    • Thank you for watching and subscribing to the channel. We have many great and meaningful videos for you to watch

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Always love to sit relax and watch the genius do is thing. He's truly a genius.

    @evertonhibbert4417@evertonhibbert44172 ай бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Ohh, good. I wish I have this machine to teach the community youth carpentry works.

    @AnnabiEmmanuel-me3mz@AnnabiEmmanuel-me3mzАй бұрын

    • 👏👏👏

      @restorationproduct1718@restorationproduct171829 күн бұрын

  • I don't know anything about electric machinery restoration but you did an excellent job of making this functional again. Good work! 😊

    @copperman752@copperman7526 ай бұрын

    • Thank you very much

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • Nice rebuild. No chickens were harmed in the making of this video. LOL! Cheers Terry

    @machinist5828@machinist58284 ай бұрын

    • Thank you very much, we did our best to achieve this,

      @restorationproduct1718@restorationproduct17184 ай бұрын

  • Love the video some great details on the machine and heck rather enjoyed the bird who would occasionally grace us with a visit by walking through the video

    @mikekellerman8842@mikekellerman88429 ай бұрын

    • Thank you we are very happy to have a funny audience like you

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • هذه القطعه الثمينه تستحق المعاناة والمال

    @vip3773@vip37739 ай бұрын

    • شكرا لكم على المشاهدة والاشتراك في القناة

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Simply amazing work my friend! The dedication and hard work put into this has to recognized! Well done!!

    @czh2432@czh24329 ай бұрын

    • Thank you very much, we have a lot of great videos for you, please watch them

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • U

      @senglaw8328@senglaw83289 ай бұрын

    • He never set the out-feed table correctly thus making the jointer useless and dangerous to anyone attempting to use that tool…he painted the beds of all three tools…the beds should never be painted…raw metal should always be the condition of these beds and waxed for operation and rust prevention…it is clearly evident this individual has no clue how these machines should be operated or set to operate safety…any other version of this is pure ignorance…next time we see this individual I’m sure a few digits will be missing.

      @robertdaigle7021@robertdaigle70216 ай бұрын

    • @@robertdaigle7021 I agree with you, but you have to admire the amount of work he put into this. With a little mentoring, he could really bring a lot of these tools back to proper working condition.

      @czh2432@czh24326 ай бұрын

  • I bet you were glad that you had the video of taking it apart! That a lot of pieces.

    @louisl.8724@louisl.8724Ай бұрын

    • We also thought so, but that's not true at all, because that machine is too difficult and has too many details

      @restorationproduct1718@restorationproduct1718Ай бұрын

  • Beautiful work thank you for all the help with you,❤🎉 dhaka-bangladesh.

    @mohammadzahangiralam1638@mohammadzahangiralam16388 ай бұрын

    • Thank you for watching and subscribing to our channel, we have many interesting videos waiting for you to watch

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • Отреставрировал конечно хорошо, но вот столы на фуганке не отрегулировал как положено по высоте, чуть без пальцев не остался

    @user-ip3yr8zo4u@user-ip3yr8zo4u9 ай бұрын

    • Спасибо за просмотр и подписку на канал

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • ПРИВЕТ, С РОССИИ..... ТЫ КРАСАВЧИК 👍👍👍👍👍👍👍👍

    @NORD-fb3cx@NORD-fb3cx5 ай бұрын

    • Спасибо за просмотр и подписку на канал

      @restorationproduct1718@restorationproduct17185 ай бұрын

  • Como decía mi difunta abuela la vista evita la respuesta ya que el sensor es conocedor de la materia muchas bendiciones por que es un artista e la materia

    @user-ge8ck5oe6q@user-ge8ck5oe6q4 күн бұрын

    • 👍👍👍😁😁

      @restorationproduct1718@restorationproduct17184 күн бұрын

  • Extraordinary! Watching them work is like witnessing magic

    @AgricultureTechUS@AgricultureTechUS17 күн бұрын

    • 👍👍👍👏👏👏

      @restorationproduct1718@restorationproduct171817 күн бұрын

  • outstanding

    @howardbender7142@howardbender71429 ай бұрын

    • Thank you for watching and subscribing to the channel, we will try more to not let you down

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Vc e um jenio mesmo tá de parabéns serviço mais que perfeito 👏👍👍💋❤️❤️💋💋

    @analuciafrazao8634@analuciafrazao86348 ай бұрын

    • Obrigado por assistir e se inscrever no canal

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • That Saigon rooster looks sick......restore the feathers on that bird. Good job on the machine.

    @w.p.3539@w.p.35399 ай бұрын

    • hank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • 3 in one machine that is awsome very good getting it back working great restoration which I like wish all people think like this if the machines are fixable.

    @user-sx8px4ki3z@user-sx8px4ki3z4 ай бұрын

    • Thank you very much, we still have many old products that need to be restored, please look forward to them

      @restorationproduct1718@restorationproduct17184 ай бұрын

    • @restorationproduct1718 wish I could try and work with you to learn how some of the electrics work. Great videos though

      @user-sx8px4ki3z@user-sx8px4ki3z4 ай бұрын

  • I hope your channel finds great success. Great mechanical knowledge to preform this restoration

    @mikewoehler7624@mikewoehler76244 ай бұрын

    • I hope your channel finds great success. Great mechanical knowledge to preform this restoration

      @restorationproduct1718@restorationproduct17184 ай бұрын

  • Beautiful restoration

    @carrestore@carrestore9 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • From Kerala . Your work Super ❤ wood work is 😢

    @369JP@369JP9 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Foarte frumos meseriaș în restaurarea unui abric de debitat lemn. Mi-e îmi place foarte mult.

    @octavianraducanu4048@octavianraducanu40487 ай бұрын

    • Vă mulțumim pentru vizionare și abonament la canal

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • Шикарный рейсмус! И практически бесплатно. Аплодисменты!

    @user-bv4qd2vn5m@user-bv4qd2vn5m9 ай бұрын

    • 👍👍👏👏👏

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • En cuanto a la seguridad..... nunca ví una animalada tan grande.....locura total.

    @richardguu7370@richardguu73709 ай бұрын

    • Gracias por ver y suscribirte al canal

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Thank you for the video! Nice job! remember (If we throw everything we build in the garbage we teach our kids everything we build is trash!) Thanks for keeping a great machine out of the scrap yard!!!

    @lloydfranks1357@lloydfranks13577 ай бұрын

    • Thank you for watching and subscribing to the channel, we have many other interesting videos for you to pay attention to

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • A valuable piece if machinery restored brilliantly to service.

    @davidsullivan1529@davidsullivan15296 ай бұрын

    • Thank you very much, we need audiences like you, we are very pleased and happy, see you in the next videos

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • At 54:35, it was very dangerous... Hey man, watch your fingers! You also need to set up the wood leveling table correctly. After planing, the wood must be completely flat. This is what this machine is for :)

    @jernejfunkl8300@jernejfunkl83009 ай бұрын

    • At first we tried the new machine, then we adjusted the blade, thank you for watching and subscribing to the channel.

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Outfeed table.

      @stefankaz53@stefankaz539 ай бұрын

  • You are a true genius! Enjoyed full length of your video.

    @douglaskim6611@douglaskim66119 ай бұрын

    • Thank you, we have a lot of good videos, please follow us

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Good job

    @signorsiluro145@signorsiluro145Ай бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct1718Ай бұрын

  • Золотые руки у вас берегите себя 👍😉👋💪

    @user-ke2wk6vq7y@user-ke2wk6vq7yАй бұрын

    • 👍👍👍👍

      @restorationproduct1718@restorationproduct1718Ай бұрын

  • How many of you waited to see if he was going to primer the rooster too?

    @Gregorovich512@Gregorovich5122 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Zdolny człowiek, z takiego złomu potrafił zrobić COŚ. Gratuluję ❤

    @teresasliwinska6250@teresasliwinska62507 ай бұрын

    • Dziękuję bardzo, mamy wiele ciekawych filmów, zapraszamy do obejrzenia

      @restorationproduct1718@restorationproduct17187 ай бұрын

    • Z naciskiem na coś, maszyna odrestaurowana ale wymaga jeszcze dużo regulacji, w tej chwili jest to maszyna do niszczenia drewna. Testy to ... śmierć w oczach.

      @jacekbmw9456@jacekbmw94565 ай бұрын

  • Sin demérito del esfuerzo y pese a las limitaciones del lugar en: equipo o herramientas, los reemplazos como el tensor de cadena que no es original, las cajas de conecciones que se pueden improvisar con cajas conduit normalizadas para resistencia mecánica, y decir que las superficies de trabajo expuestas a roces de la madera, no deben pintarse porque eso crea alguna resistencia al avance, aparte de manchar en algunos casos las piezas de madera. Lo mejor es solo pulir bien y dejar el metal tal cual. Pero les felicito.

    @22763344@227633448 ай бұрын

    • Gracias por compartir muchos conocimientos interesantes, necesitamos aprender mucho de ti.

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • El mejor botador es una valvula de coche , los felicito , saludos desde Monterrey Mexico.

    @robertodominguez7453@robertodominguez74536 ай бұрын

    • Gracias por tus comentarios, nos alegra tener un público como tú.

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • BEAUTIFUL RESTORATION !!!!!!!!!! THANKS !!!!!!!!! JESUS CHRIST IS LORD !!!!!!!!! AMEN !!!!!!!!!!!

    @fernandoangelaford1483@fernandoangelaford14839 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Parabéns, ficou ótimo.

    @junioroliveira4451@junioroliveira44519 ай бұрын

    • Nós sempre tentamos o nosso melhor para criar os produtos mais perfeitos

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • These guys never stop to impress. 😊😊

    @evenberg8499@evenberg84996 ай бұрын

    • 😘😘😘

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • Great work clever man well done 👏 👏👏👏👏👏👏👏👏👏👏👏👏👏👏

    @roybailey9554@roybailey95547 ай бұрын

    • caqmr Thank you very much, we have many good videos for you to watch

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • It would have been a great shame to lose such multifunctional work station. You have done a wonderful restore. One suggestion if you are keeping it for personal use, I would cold blue the bare metal slide surfaces. Regardless, nice job.

    @marlinblack6597@marlinblack65978 ай бұрын

    • Thank you for sharing your review experiences, we are very happy to have honest audiences like you

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • Nice work but the table tops should not be painted just polished and machine waxed

    @SilverBack.@SilverBack.9 ай бұрын

    • you are very right to say that the worktop is not painted. we have cleaned the paint on the work surface and applied a protective oil on it, thank you for everything

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Poca seguridad n el uso d la máquina...

      @rolandocarrazana8702@rolandocarrazana87029 ай бұрын

    • Non of the machined faces should be painted.

      @aytonbob@aytonbob9 ай бұрын

    • 8

      @franciscojaviermartinezrom7411@franciscojaviermartinezrom74119 ай бұрын

    • Non of the machined faces where the wood will be touching or sliding should be painted. Rather they should be polished and then given a coat of wax. Other than that mistakes nice job.

      @mauriceryton@mauriceryton8 ай бұрын

  • Genius is an overstatement. Hard work, patience, and determination are all that is needed. I agree with another person's comment that painting the surface of the tables or the shafts of the rotating parts is not a good idea.

    @dankoston2904@dankoston2904Ай бұрын

    • Thank you for your comments. We invite you to watch our next follow-up videos

      @restorationproduct1718@restorationproduct1718Ай бұрын

  • Excellent job, congatulatioins, boy.👍👍👍

    @martinforever11@martinforever116 күн бұрын

    • Thank you very much. We invite you to watch our next videos

      @restorationproduct1718@restorationproduct17186 күн бұрын

  • Make a finger board so you don’t get kick back and also use a push stick. But a really nice job.

    @martyclack8782@martyclack87824 күн бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct17184 күн бұрын

  • Wow! he could have had a very bad accident when planning that piece of square wood. The back table wasn't set level with the cutting edge of the blades, it was to low, so when he got to the end there was a big dip in the cut.

    @anthonyroche1848@anthonyroche18489 ай бұрын

    • I'm sure you are a professional, we thank you for your comments, good luck

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • @@restorationproduct1718 Thanks for the reply. I am a qualified wood machinist.

      @anthonyroche1848@anthonyroche18489 ай бұрын

    • Outfeed table

      @stefankaz53@stefankaz539 ай бұрын

    • It also looks like the in feed and out feed tables weren't parallel @@stefankaz53

      @colinhercus7765@colinhercus77659 ай бұрын

    • Oh, so the exit side has to be parallel to the planer blades' cutting edge to prevent the overdigging and danger of feedback? Good to know. I would think they would use push sticks or some form of safe workholding - anything to keep fingers away from that exposed high speed planer blade...yeesh Also, I am assuming that the correct direction of workpiece is against direction of cutter rotation? I've been rather interested in a planer, but more of a want than a need, as I am more of a machinist than a woodworker

      @asakayosapro@asakayosapro8 ай бұрын

  • Well done, dangerous piece of equipment if you’re not careful as you almost found out.

    @markB40@markB409 ай бұрын

    • We have to be very careful. Avoid all possible risks

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • He was taking way too much of a bite on that piece of lumber.

      @tomnorman5461@tomnorman54619 ай бұрын

  • The machine is working perfectly

    @5phutsangtao-iQ@5phutsangtao-iQ9 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • I never saw the machine work perfectly. What time did that happen?

      @ajwalou-nack2343@ajwalou-nack2343Ай бұрын

  • I like to watch when people themselves do what they need, without crying over the fact that there is no money for what they need! How did such a wonderful unit get thrown out?!

    @karmen430@karmen4309 ай бұрын

    • That machine of the wood workshop was burned or not working. Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • This guy will have to be a genius to be able to remember how all the parts go back together. We have a machine here in the States called a Shopsmith.

    @jenksify@jenksify9 ай бұрын

    • it's our job, we have to remember all the details

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • If only someone had made a video of him taking it to bits…

      @seadog158@seadog1588 ай бұрын

    • Putting it back together is simple if you play the video backwards. Don’t have to be a genius, just clever.

      @allenmorris85@allenmorris858 ай бұрын

  • Вы Мастер! Удачи Вам!

    @user-cc6el5ym2g@user-cc6el5ym2g9 ай бұрын

    • Спасибо за просмотр и подписку на канал, обещаем стараться не подводить

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Super restauration plus passionnant à faire, qu'un puzzle super

    @mahitecamoreyt6366@mahitecamoreyt63662 ай бұрын

    • Merci d'avoir regardé et de vous être abonné à la chaîne

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Great job I am sure that will come in handy

    @gregb76@gregb769 ай бұрын

    • that machine will make a lot of prestigious wood products, thank you very much

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • I'm a new subscriber. Fantastic job of rescuing this piece of equipment. I do agree that metal table tops should not be painted, as the paint will wear off. You can clean them with WD40 ans steel wool. Then waxed with machine wax or car polish. This will repel water and prevent rust. Remove all rust from the inside of brackets and the bars that hold them. Other wise it will continue to rust. Avoid painting adjustment screws and the gears. As the paint will wear of and can cause problems later. Polish them as clean as you can. Tape off before painting, then apply grease only. Good luck, hope to see more soon.

    @TheParkAttendant@TheParkAttendant9 ай бұрын

    • Thank you for sharing a lot of interesting knowledge, we learn a lot from you

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • 54:38: man that's soooooo dangerous - kickback. lucky no-one was stood in line with the projectile.

    @raymondo162@raymondo1629 ай бұрын

    • We were very lucky that no one was hurt , thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Luckily his hand didn't go straight into the blade....

      @fraidykat@fraidykat9 ай бұрын

  • Great job on restoration well done

    @johncarter9067@johncarter90679 ай бұрын

    • 😃😃Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Great Job he knows the business, Great patience

    @williamtorres3694@williamtorres36942 ай бұрын

    • Thank you very much, please watch our next videos

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Always amazed how he transforms old machinery into new condition with basic tools...

    @jsfoster75@jsfoster759 ай бұрын

    • You too can do that. All you need is a lot of tools/supplies and the ability to use them. Plus, a digital camera or 3 helps a lot in rebuilding.

      @lstein3372@lstein33729 ай бұрын

    • That is our job and our passion

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • 👍👍👍👍

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Your work was fantastic and remarkable , and I loved it . God bless you .

      @mohammadrezakoochekiansabo7214@mohammadrezakoochekiansabo72149 ай бұрын

  • At 50:31 joining the bare wires then wrapping them in tape cramming them into that sleeve is a potential shock death and fire Hazard!!!

    @kinasc1575@kinasc15759 ай бұрын

    • Don't worry, we have done everything carefully, absolutely safe for users

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Finally restoring something that can actually be used! Great job.

    @crusaderking5387@crusaderking53877 ай бұрын

    • Thank you very much, we have many interesting recovery videos for you to watch

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • *Thank you for a very good video. Valuable leason learned!* 👍❤😊

    @masterQ20@masterQ208 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • у нас таких "гениев" в каждом гараже по 5 штук.. и зовут их слесарями.

    @user-du5xp6lp3v@user-du5xp6lp3v6 ай бұрын

    • Большое спасибо

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • Parabéns 🎉🥳👏 seu trabalho de Restauração ficou top 10 👋👍

    @djalmabatista5286@djalmabatista52868 ай бұрын

    • Obrigado . Temos muitos vídeos interessantes para você assistir

      @restorationproduct1718@restorationproduct17188 ай бұрын

    • ❤❤

      @user-qu6dr6bi2g@user-qu6dr6bi2g8 ай бұрын

  • Espectacular restauración,como en su mejor época,felicitaciones. 👍👋

    @luisarevalo1396@luisarevalo13962 ай бұрын

    • Muchas gracias, por favor mira nuestros próximos videos.

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Great restore and it looks brand new. 👍

    @alantan6255@alantan62559 ай бұрын

    • Thank you so much, we have a lot of great videos for you

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • That "chain tensioner" had me shouting "NO!". Go down the breakers yard and grab one off a car, please?

    @lstein3372@lstein33729 ай бұрын

    • Thank you very much. The chain tensioner is extremely simple but surprisingly effective

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • ​@@restorationproduct1718Ah ah ah 54mn.45 .be carful be carful 👍❤👍❤👍❤

      @zadabjlil2281@zadabjlil22819 ай бұрын

    • @@restorationproduct1718 18

      @damangrewal658@damangrewal6587 ай бұрын

  • Parabéns, execução perfeita!

    @luciooliveira111@luciooliveira1118 ай бұрын

    • Obrigado por assistir e se inscrever no canal

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • Buen trabajo. Buena máquina.

    @Jaume468@Jaume4685 ай бұрын

    • Gracias por tu elogio. Te invitamos a ver nuestros próximos videos.

      @restorationproduct1718@restorationproduct17184 ай бұрын

  • Fantastic, excellent watching, congratulations.

    @mateuszx17@mateuszx175 ай бұрын

    • Thank you for the love you give us, please watch our next videos

      @restorationproduct1718@restorationproduct17185 ай бұрын

  • Brawo .Super robota .Pozdrowienia z Polski.

    @eugeniuszsmardz9171@eugeniuszsmardz91719 ай бұрын

    • Dziękujemy za oglądanie i subskrybowanie kanału, mamy dla Ciebie wiele ciekawych filmów do obejrzenia

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • The skill & expertise shown on this is excellent. Many designing engineers deal with a complex machines they draw up and only have responsibility on a theoretical basis. In other words they aren’t mechanics putting the equipment together, or the end user actually getting it to function, in this case carpenters. That is not to say any of these skill sets are inferior, but my gues this fellow is mor of a mechanic than design engineer or carpenter. I also think it is entirely possible that he’s never seen this Hitachi in any shape. His talent is superb. The owner of the shop that abandoned it is probably still looking for the idiot that parked outside. This machine in its ruined condition would bring around $4000 US. Restoration would add several days and bring the price up again. Very complex. Thanks for posting. 0 57:52

    @allenkennedy6748@allenkennedy67488 ай бұрын

    • thank you very much , we worked for many days to get it working again, the result is amazing

      @restorationproduct1718@restorationproduct17188 ай бұрын

    • Set the second half of your jointer table the same height as your blades are cutting and you will eliminate that deeper cut at the end of the pass

      @davidhaning9299@davidhaning92993 ай бұрын

    • Hats off to the genius who designed this machine 😅😊😅😊❤

      @colintuffs568@colintuffs568Ай бұрын

  • I'm so impressed wow so incredibly talented

    @pappas49@pappas499 ай бұрын

    • Thank you very much, we have a lot of interesting videos for you

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • Perfect renovation of the carpentry machine! Please keep the bird away at the next paintwork! He was not seen to seem to like this so well! Haha! 😁

    @lars-goranberg1422@lars-goranberg14227 ай бұрын

    • Thank you for your feedback, we will learn from your experience next time

      @restorationproduct1718@restorationproduct17187 ай бұрын

  • awesome job mate another one back to life you are very very talented man love your videos all the best

    @paulfellows2094@paulfellows20949 ай бұрын

  • Sensacional 👏👍

    @tecaodeajute472@tecaodeajute4729 ай бұрын

    • Obrigado por assistir e se inscrever no canal

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • You were quick, lucky the motor did not need re-wiring. Pity your paint found it´s way on parts that should not see any. Maybe take pictures next time. Also, the planer on the plank was set take way too much, as you watched it shoot off. Next time make shore you do it in stages and to not have the wood rocking, you can turn to cut from the other end, yet always try to cut with the grain, like you would with a hand Plane ok. I have watched so many young builders cut their own planks and then buy a hand Planer to clean each side, it takes a long time. You could offer this service and make a lot of money on the side Thanks for you film, loved the color choice from the 60´s. They made things to last back then.

    @majorbrighton@majorbrighton2 ай бұрын

    • Thank you very much, we will learn from your experience for the following videos

      @restorationproduct1718@restorationproduct17182 ай бұрын

  • Espectacular restauración 👏🏽👏🏽👏🏽👏🏽👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽

    @joserodolfoaguirre4937@joserodolfoaguirre49378 ай бұрын

    • Gracias por ver y suscribirte al canal.

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • A mon humble avis pour le commun des mortel il est impossible de remonter cette machine sans posséder des connaissances sérieuses dans le domaine de plus cette machine avait été préparée pour la vidéo de plus une fois remonté il faut quelle fonctionne mais si elle à été jetée il y avait surement une raison valable une panne qu'il va falloir nous donner une conclusion et même une explication sinon cela voudrais dire qu'il nous prend pour des idiots qu'il me donne l'explication ,?

    @henridelas718@henridelas7189 ай бұрын

    • Nous avons travaillé très dur pour restaurer cette machine, nous voulons une machine vraiment belle et stable.

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • You're not going to "find" it washed up on the beach?

    @heliarche@heliarche9 ай бұрын

    • because it was so big and heavy we used a crane to pick it up

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • you are amazing and god gifted talent do not even read none cence comment ,if they could do what you did then they can choose color or other stuff they think they are profeciona whic they are not ,Good lord bless you and help you to success in every minutes of your life

    @patriciaasef8309@patriciaasef83098 ай бұрын

    • Thank you very much, we are very happy to have audiences like you

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • amazing perfection love the colour

    @paulfellows2094@paulfellows20948 ай бұрын

    • Thank you very much, we have many other interesting videos for you to watch

      @restorationproduct1718@restorationproduct17188 ай бұрын

  • This video's been always fake,i never find something like this.

    @harmzondag9596@harmzondag95966 ай бұрын

    • Thank you for watching and subscribing to the channel

      @restorationproduct1718@restorationproduct17186 ай бұрын

  • That's a sick looking bird.

    @davidnixon1697@davidnixon16979 ай бұрын

  • you need to adjust the outfeed table on the jointer higher

    @dont-want-no-wrench@dont-want-no-wrench9 ай бұрын

    • we do not have specialized and modern machines , we do it entirely from available experience , thank you for everything

      @restorationproduct1718@restorationproduct17189 ай бұрын

  • I don't know what these other people are watching, but this was a horrible restoration. If you were going to spend the time completely dismantling this thing, you could have done a much better job at prepping the parts for paint. Taping off the areas that needed to be taped. What was the purpose of putting body filler on the base and not the rest of it? I'm not going to go on about all the other mistakes. Next time, do better. Good luck!

    @thaddeusfeldhouse6174@thaddeusfeldhouse61749 ай бұрын

    • Thank you for your attention and reminder, we are very happy to have an audience like you

      @restorationproduct1718@restorationproduct17189 ай бұрын

    • Não tem nada que um jato de areia não resolva

      @sebastiaoRangel0903@sebastiaoRangel09034 ай бұрын
KZhead