Forge Korean Takedown Steel Bow from Rusty Leaf Spring | Forge a steel BOW out of Rusted Leaf SPRING

Bows can be made out of many type of materials and tools at low cost. in my previous videos, I built a few bows from old bicycle wheels . They can be as cool as bow made form PVC pipe especially when it can function as a normal bow or even can do bow fishing with it. I built one of bow with the inspiration from the Green Arrow bow, or Oneida compound bow. This time, I would like to present you my new Korean take down bow I made from an old rusty leaf spring which I bought at the local salvage yard. I. After several test shot at the target, i think one day, I should use it to do bow fishing a long with my crossbow. It's also fun for shooting this bow vs coke. The draw weight is 60lbs at 28 inches. The bow limbs are 4mm thick, the width is 2,4 cm. The thickness of the part of the bows to insert in the sockets that form the grip is 6mm thick. and the grip length is 10,5 cm.
In my previous video, I built a similar bow using four coil springs making the bow strong enough to shoot small games or do bow fishing. And I also show how I made the arrow rest from a PVC pipe.
In my previous video I show a bow that I made out of a Leaf Spring that I found an old leaf spring at the local salvage yard. It was a good bow and more powerful than this bow. Please check it out in this link : www.youtube.com/watch?v=ASlWj...
Please also check out my similar bow making project :
Bow made from bicycle wheel, arrow rest made from PVC pipe :
www.youtube.com/watch?v=PgwCo...
The followings are related videos :
Home made pistol crossbow part 2 - prods made from shovel not PVC, good for survival : www.youtube.com/watch?v=BkPZc...
How to build Mini Medieval crossbow, Rose Wood stock, prod made from blade of table plane not PVC : www.youtube.com/watch?v=TjtA7...
DIY, home-made crossbow bolts or arrows, an easy way to make dowels for crossbow bolts and arrows : www.youtube.com/watch?v=j1aVI...
Bögen können aus vielen Arten von Materialien und Werkzeugen kostengünstig hergestellt werden. In meinen vorherigen Videos habe ich ein paar Bögen aus alten Fahrradrädern gebaut. Sie können so cool sein wie ein aus PVC-Rohr hergestellter Bogen, besonders wenn sie als normaler Bogen funktionieren oder sogar mit dem Bogen angeln können. Ich habe einen Bogen gebaut, der vom Green Arrow-Bogen oder Oneida-Compoundbogen inspiriert ist. Dieses Mal möchte ich Ihnen meinen neuen koreanischen Take-Down-Bogen vorstellen, den ich aus einer alten rostigen Blattfeder gemacht habe, die ich auf dem örtlichen Schrottplatz gekauft habe. I. Nach mehreren Testschüssen auf die Zielscheibe denke ich, dass ich sie eines Tages zum Bogenfischen mit meiner Armbrust verwenden sollte. Das Zuggewicht beträgt 60lbs bei 28 Zoll.