KZhead
Тәжірибелік нұсқаулар және стиль

How to Remove Small Dents Paintless Dent Repair PDR

Figuring It Out
2022 ж. 25 Қаз.
132 597 Рет қаралды
Жүктеу

Most small dents come out pretty well. Be patient and eventually they come out.
Here is an Amazon link to the kit: amzn.to/3zhWqbQ
Disclosure, this is a promotional link. No change in price to you.

Пікірлер

  • You can finish the rest on a hot day. Let the dent set exposed to the sun then use a can of air duster and hold upside down letting frozen liquid out onto the dent. The dented area will shrink up pulling metal flat. I've used this method several times.

    @jonmixer6142@jonmixer6142 Жыл бұрын

    • i’m interested😂 how and what is supposed to be frozen? i’m genuinely wondering as i just bought a truck and need to do some work

      @HomeStatOfficial@HomeStatOfficial8 ай бұрын

    • ​@@HomeStatOfficialIf you flip a can of air duster, like they use in offices to clean keyboards, upsidedown the liquid will start to come out really really cold. So I'm guessing if you spray that frozen liquid on a hot panel it will have some sort of reaction forcing it to pop the dent out. 🤷‍♂️

      @gzus1482@gzus14828 ай бұрын

  • Bought it. Got a restoration project going on. Hail hits, and some other hits. I got patience and time. Thanks.

    @cruelsun9243@cruelsun92436 ай бұрын

  • Thanks for the video. Really excellent job for a home repair. I have a few dents to take care of and will use this kit.

    @farnugen7685@farnugen7685 Жыл бұрын

  • Great tutorial and setting of limits there! Good Work!👍

    @zeeshanalikhananwar@zeeshanalikhananwar7 ай бұрын

  • terrific presentation, helped a lot, thanks!

    @thomassaylorrealtorlicense8763@thomassaylorrealtorlicense8763 Жыл бұрын

  • Good work, that looks damn good

    @ShowemRight@ShowemRight Жыл бұрын

  • Wow impressive! Thank you

    @user-tg1iv4sd2e@user-tg1iv4sd2e5 ай бұрын

  • Wow that came out good.

    @iivv_nn@iivv_nn2 ай бұрын

  • Thank you 🙏

    @sloyoteftw@sloyoteftw Жыл бұрын

  • love the detailed instruction.

    @yushaos@yushaos Жыл бұрын

  • Thank you, useful video 😊👍

    @podeig@podeig Жыл бұрын

  • Where can I get that work light? It is really impressive. So is your skill. Thanks

    @jamesross117@jamesross11710 ай бұрын

  • Good video ❤

    @JoeFidler@JoeFidler Жыл бұрын

  • This is perfect I think I want this for the tiny dent above my wheel arch. Do you have the link

    @kameoncarter4512@kameoncarter4512 Жыл бұрын

  • Never remove the glue with your finger nail,a cleaner way is to use isopropyl alcohol and no scratches.

    @oldmanJ@oldmanJ7 ай бұрын

  • Looked pretty good.I don’t understand how the plastic punch tool for hammering in a bump doesn’t put small dents back in ?

    @andrewsproson1410@andrewsproson1410 Жыл бұрын

  • amazing job ... sir just want to know how i can use the glue ? i mean is the gun heating up the glue before i can apply to the dent ? cause someone did small dent on my fender about an inch .

    @gamemaster6842@gamemaster68428 ай бұрын

  • effective on corners? Like the rear part?

    @Dennis-yl3cf@Dennis-yl3cf6 ай бұрын

  • can you tell me what kit you purchased

    @user-xh4lw8um6b@user-xh4lw8um6b10 ай бұрын

  • I ahve several glues. Some came with teh kit some I ordered extra. Looks like your using the general glue from the kit.

    @EdWeibe@EdWeibe Жыл бұрын

  • Use isopropyl alcohol to clean the glue off

    @ridenfish39@ridenfish398 ай бұрын

  • Got this kit also has black glue as well is there a difference.

    @ernk75@ernk75 Жыл бұрын

    • Black glue has less holding power than the clear

      @billstetler6769@billstetler67698 ай бұрын

  • dam good effot !

    @karenmurray3098@karenmurray30989 ай бұрын

  • I have a dent twice that size in my door. Does that method work for doors too?

    @bettymeow9764@bettymeow9764 Жыл бұрын

    • Yes. Use bigger pull tabs. Just make sure the door has not been repainted at some stage as the glue can pull off paint.

      @ukulelewizard6392@ukulelewizard6392 Жыл бұрын

  • Hi, did you heat up the area using heat gun before using the dent puller ?

    @harjotsandhu2354@harjotsandhu235410 ай бұрын

    • Thanks for the reply.

      @harjotsandhu2354@harjotsandhu23549 ай бұрын

    • @@harjotsandhu2354 LOL!

      @basesperanca@basesperanca3 ай бұрын

    • @@basesperanca LOL it's good to laugh

      @harjotsandhu2354@harjotsandhu23543 ай бұрын

  • Could you give me the link, please!

    @georgedragoiu0909@georgedragoiu090911 ай бұрын

  • 91% isopropyl spray will release the glue 😊

    @ShaneMiller1@ShaneMiller17 ай бұрын

    • ....and the paint as well.....

      @ac-qi3gi@ac-qi3gi3 ай бұрын

    • ​@ac-qi3gi as long as you get it off fast and don't let it sit

      @korbindutkiewicz7964@korbindutkiewicz79643 ай бұрын

    • goo gone?

      @DannySolvesTech@DannySolvesTech3 ай бұрын

  • Looks a good tool, but I'd be really concious of creating extra damages everytime you drop the little puller onto the car's paint work - I cringed everytime it happened and there seems to be a long scratch next to the dint after the third attempt - ouch ! But thanks for sharing.

    @nickhardy9862@nickhardy9862Ай бұрын

    • No scratch. That may be glue residue. It all wiped off.

      @FiguringItOut1@FiguringItOut1Ай бұрын

  • They need to invent a variable magnet with different sized bases that will pull a small dent flush and even with the base. A one-time pull. Comprende? Lo entiendes? Do you get my drift?

    @mmahtnart8986@mmahtnart89867 ай бұрын

  • 6 dents in on my hood frm acorns

    @rcbell436@rcbell4365 ай бұрын

  • can you use that method when the dent have paint chip?

    @SinagArawTV@SinagArawTV Жыл бұрын

    • yeah but its not going to magically get repainted, r ight?

      @rmat9023@rmat9023 Жыл бұрын

    • Same question here. Have a small dent similar to above with a paint chip. Want to pull out dent before touching up. Afraid the glue may remove additional paint.

      @lwhitty@lwhitty7 ай бұрын

    • @@lwhittyas a pdr beginner, I don’t recommend glue pulling it. If the paint of the car isn’t a factory painted then glue pulling the dent will cause the paint to pull off as well

      @christianh3565@christianh35656 ай бұрын

  • I MUST ORDER THIS . I dont know if the bird that took a shit on my car eat stones because after I washed the shit of , it left a nast dent.

    @ettienneesterhuizen1291@ettienneesterhuizen12917 ай бұрын

    • Sounds like perhaps it wasn't a bird at all, you say after you cleaned up the shit there was a dent left behind? Perhaps you drove thru the ghetto and someone tweaked out a shit off a fire escape and when it traveled down a few flights left a dent.

      @atruceforbruce5388@atruceforbruce53887 ай бұрын

  • did it not leave like a million scratches or is that me

    @glizzyisbest2027@glizzyisbest20278 ай бұрын

    • It's you. Anything that is there can easily be removed with some polishing.

      @basesperanca@basesperanca3 ай бұрын

  • Or get a decent PDR Pro and get it out 100%

    @cbattman@cbattman7 ай бұрын

    • Some people just like the satisfaction of doing something with their own hands, being independent, and having the ability of doing it over and over. Saving money is one side of it, but there are more sides to most DIYers.

      @basesperanca@basesperanca3 ай бұрын

  • Your using to much glue

    @cashgmoney@cashgmoney Жыл бұрын

  • Long process

    @Foundonetruth@Foundonetruth2 ай бұрын

  • Note will not stick to ceramic coats.

    @ernk75@ernk75 Жыл бұрын

    • Oh darn. I just got my car ceramic coated by the dealer.

      @cbsharpe0824@cbsharpe0824 Жыл бұрын

    • @@cbsharpe0824can just polish off the coating in that small area and then recoat it easily after the repair, that’s what I did.

      @HellzHonour@HellzHonour10 ай бұрын

    • @@HellzHonour Okay, good to know. Thank you!

      @cbsharpe0824@cbsharpe082410 ай бұрын

  • Next video "How to fix scratches caused by pulling"

    @josbing3497@josbing349724 күн бұрын

  • Ok so i just damaged dads car, im fucked i guess

    @igorbucenko6024@igorbucenko6024 Жыл бұрын

    • How so?

      @datmandeyah_8083@datmandeyah_8083 Жыл бұрын

    • You're dead

      @galvanizedgnome@galvanizedgnome10 ай бұрын

    • Well doing this all yourself wasn’t a great idea

      @christianh3565@christianh35656 ай бұрын

  • Yeah im gunna pass on putting glue on my car 😂

    @shitface1704@shitface17043 ай бұрын

    • If you're doing this in the cold, it's a good idea to use a heat gun (or hairdrier) to heat the paint up so it will not chip. Additionally, alcohol should be used to get rid of the glue, it comes right off. I'll be trying this on my new (to me) BMW which comes with dents on the hood "pre-installed". God help me.

      @basesperanca@basesperanca3 ай бұрын

    • Thats good,u shudnt be touching your car if you have no idea what your doing.

      @glitchthecat5011@glitchthecat50112 ай бұрын

  • Causes more damage than He tries to fix :D

    @bungietwab4868@bungietwab4868 Жыл бұрын

    • Does he?

      @TheRoadLessChosen@TheRoadLessChosen Жыл бұрын

    • @@TheRoadLessChosen You blind? Look at the scratches he's left.

      @bungietwab4868@bungietwab4868 Жыл бұрын

    • @@bungietwab4868 those aren't even scratches, easily hand polished out.

      @j.j.123@j.j.123 Жыл бұрын

    • ​@@bungietwab4868 aren't those just fine threads of glue?

      @davidthomas9165@davidthomas9165 Жыл бұрын

    • Just smeared glue. Wiped off. No scratches.

      @FiguringItOut1@FiguringItOut111 ай бұрын

  • You're supposed to clean off the excess glue after every single pull....man,this guy has absolutely NO IDEA what he is doing, there are zero reasons to take advice from this beginner

    @glitchthecat5011@glitchthecat50112 ай бұрын

  • I feel that you are just a beginner at pdr.... Reason i say this is BECAUSE YOUR NOT EVEN USING YOUR LINEBORD,that is literally the first thing ANY pdr tech learns how to use... you literally have that light on for no reason

    @glitchthecat5011@glitchthecat50112 ай бұрын

  • Bbbahahahahahhahahahahahab " it's getting harder for me to see the dent so I'm going to put some marks around here" what do you think the line board is even 4?... why is a beginner trying to give advice

    @glitchthecat5011@glitchthecat50112 ай бұрын
KZhead