KZhead
Автокөліктер мен көлік құралдары

The Way I Repair A BIG Dent With Paintless Dent Removal | PDR

Dent-Remover
2024 ж. 8 Мам.
1 281 859 Рет қаралды
Жүктеу

Vehicles with dents can be repaired with Paintless Dent Removal (PDR)
This Mini was a recent job of ours, Our customer called us to say her car had been damaged by passers by falling/kicking the side of the car and leaving a hefty looking dent
The repair was done using only the latest Glue repair tools and a bit of skill! I filmed this job to show you how the repair is carried out....I hope you enjoy!
💚WE NOW HAVE MEMBERSHIP!
Join this channel to get access to perks:
/ @dentremover01
💥We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
😊www.blackplaguepdr.com/discou...
🟢The Hot glue tabs by DB Dent tools are amazing! New 2.0 tabs have just being released and also the Green plastic Nylon ones too. Get yours now ⬇️
dbdenttool.it
🔴The Glexo cold glue can be purchased from
glexotools.com
------------------------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 Intro
00:46 Explaining the damage
02:11 Start the repair
02:52 The first glue pull (Sideways)
03:39 Using GLEXO cold glue
04:53 Check the repair so far
05:22 The top crown
08:57 Repair the middle?
10:42 Repair the bottom crown
11:14 Middle dent again!
13:12 The finishing touches
14:35 Thank you for watching til the end
14:58 Before & After shots
15:26 Endscreen
----------------------------------
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin Sadler
#paintlessdentremoval #youtube #collisionrepair #dent

Пікірлер

  • Watching high quality videos like this is the reason why I don't watch TV anymore, thanks for putting the extra time into your videos they really do come across as being really professional thank you and another job perfectly done, brilliant Martin.

    @keymad4@keymad47 ай бұрын

    • Thank you Keymad4 I really appreciate your great feedback andnits great to know I’m on the right track. A lot of effort goes into editing these so comments like yours help me move forward

      @dentremover01@dentremover017 ай бұрын

    • you deserve it.@@dentremover01

      @keymad4@keymad47 ай бұрын

    • Same here, plus you learn how to do cool stuff.

      @Choober65@Choober657 ай бұрын

    • @@Choober65 thank you

      @dentremover01@dentremover017 ай бұрын

    • I agree , YT is such an education and I rarely watch TV anymore. Whilst I may not attempt a lot of things I watch , what is does do is give me a better insight and understanding in to various things that previously I may have sat back and moaned about. I’ve added you to my subscriber list and will look at some of your other videos. Bodywork is such an art , if I could transport myself back to 16 again I’d have loved to gone down that route as a career. Top work 11 out of 10. Craftsmanship at it’s best.

      @ianrobinson9243@ianrobinson92437 ай бұрын

  • Astonishing! If it was my car I would have been totally satisfied with the first two pulls you did. But you even managed to get all the smaller dents out. A work of art.

    @marcelpursche5339@marcelpursche53396 ай бұрын

    • Haha thank you! Just takes patience to carry on and finish the repair! Thanks for watching

      @dentremover01@dentremover016 ай бұрын

    • @@dentremover01 I think that take a helluva lot more than just patience. You're clearly a very experienced repairer, with an amazing skill set. Where did you learn to do that?

      @Boxing4K@Boxing4K5 ай бұрын

    • thank you @Boxing4K I appreciate your comment.it took a few years to learn this and I taught myself while panel beating, fixing cars daily I was able to lessen the amount of filler put into cars and ended up not having to remove the paint if it was ok

      @dentremover01@dentremover015 ай бұрын

    • How much for this ''simple'' type of repair ??

      @igor9746@igor97464 ай бұрын

    • @@igor9746 this type of repair would be from a couple of hundred upwards

      @dentremover01@dentremover014 ай бұрын

  • You are an absolute artist! 👌 Btw: these repairs show how incredibly strong modern car paint is.

    @Conservator.@Conservator.7 ай бұрын

    • Hi Conservator appreciate your kind words Yes 100% the paint is very strong especially on BMW and German vehicles. Some older Japanese vehicles are quite weak though and the paint can sometimes come away

      @dentremover01@dentremover017 ай бұрын

    • A bs artist 👎

      @mik823@mik8236 ай бұрын

    • i was going to say the same thing. this is art, like a plastic surgeon but for a car. just amazing skills.

      @roromad9603@roromad9603Ай бұрын

  • I truely believe this is a craft where people underestimate the amount of experience you need to be able to do this for a living. Beautiful to see.

    @J4rn0@J4rn0Күн бұрын

  • I have never saw so much skill. I wish he would open up a shop in my town. All my best from the US. JIm

    @jimmymiller77@jimmymiller776 ай бұрын

    • Thanks Jim! In the USA there are many super techs! Have a search and see how you get on

      @dentremover01@dentremover016 ай бұрын

  • I can't help but think of the episode of Father Ted where they try and repair a small dent in a prize car. I don't think they quite had your skill level. Really nice work.

    @adfraggs@adfraggs3 ай бұрын

    • You almost had it there for a second Father!

      @dentremover01@dentremover013 ай бұрын

    • @@dentremover01 That scene must be well known in the industry!

      @gartgreenside3657@gartgreenside36578 күн бұрын

  • That's bloody amazing mate! I didn't doubt you'd get it all out, but doing without removing any trim or plastics, 100% from the outside - That I did not expect! Very impressive!

    @hydorah@hydorah6 ай бұрын

    • Thank you Hydorah I really appreciate your comment and sorry for the delay in replying. I repair lots just by using the Hot Glue System and very efficient and as you can see, effective Merry Christmas and happy new year

      @dentremover01@dentremover014 ай бұрын

  • I'm a joiner who takes great pride in my work and i must doff my cap to the care and time you put into what most people would think was an impossible job. Amazing.

    @4faxache935@4faxache9352 ай бұрын

    • Thank you so much. Nothing wrong at all with putting the effort and going the extra mile for that ultimate finish as I’m sure you do with your work. That’s what sets us apart from the rest 🙌🏼

      @dentremover01@dentremover01Ай бұрын

  • Brilliant too see a genuine craftsmen at work taking pride in their work, great job.

    @darrenclarke3677@darrenclarke36777 ай бұрын

    • Thank you Darren 🙌🏼

      @dentremover01@dentremover016 ай бұрын

  • This is amazing! The skills and patience required for this job is incredible!

    @elvinlawcc@elvinlawcc6 ай бұрын

    • Thanks for watching and commenting

      @dentremover01@dentremover016 ай бұрын

    • Not to mention tools and type of lights used

      @Trinida374@Trinida3744 ай бұрын

    • We have a lot of tools here

      @dentremover01@dentremover014 ай бұрын

  • Wow much respect for your skill. Reminds me of this documentary I saw of these Japanese metal smiths hand forming the nose section of the bullet trains. You definitely know how to read the material you work with!

    @elefja1@elefja14 күн бұрын

    • Thank you for your great comment! Metal smiths have their own set of skills I don’t think I could do that! They even amaze me

      @dentremover01@dentremover012 күн бұрын

  • Martin, thank you so much for your videos. I am a novice PDF specialist, thanks to your content I have learned a lot. I'm watching your videos through an interpreter, I'm from Russia! Thanks again!

    @user-rw9ew7yw9e@user-rw9ew7yw9e7 ай бұрын

    • Thank you for your great comment and congratulations starting PDR I do have Russian subtitles if that helps? Check out the cc in the corner of the video and choose Russian That should help??

      @dentremover01@dentremover017 ай бұрын

  • I just stumbled onto this and I've got a dent in the front of my car. It's ruddy marvelous what you've done. Pure sorcery! 👏

    @petesky007@petesky0074 ай бұрын

    • Thank you Pete! Try and speak to a Dent technician first and see what they say. Then you can attempt it or get them to fix it Happy new year

      @dentremover01@dentremover014 ай бұрын

  • That is truly awesome! Worked in a body shop 55 years ago when lead was still used to repair! This is amazing!

    @justincase1575@justincase15757 ай бұрын

    • Thanks Justin! When I started panel beating thy had just phased out lead work. Was 1997 time. Was panel beating til 2011 when I went self employed with PDR Well done doing 55years!

      @dentremover01@dentremover016 ай бұрын

  • your technique, skills, and tools are amazing to see, Martin. Thanks for producing this video!

    @binauralfortune@binauralfortuneАй бұрын

  • All the gear AND all the idea. Superb! I couldn’t believe how much you popped out, just with the first lateral pull!

    @MrBigMalT@MrBigMalT2 ай бұрын

  • Now thats a craftsman! Like watching an artist at work. Amazing!!!!!

    @Kingdonnerkebab@Kingdonnerkebab3 ай бұрын

    • Thank you so much 🙌🏼

      @dentremover01@dentremover013 ай бұрын

  • Thank you for checking out my latest repair video 😊

    @dentremover01@dentremover017 ай бұрын

    • #dentking #dentdiscount #pdrking #manofsteel #pictureperfect #creaselife #b16dent #uksnumberone

      @whodat7366@whodat73667 ай бұрын

  • I can attest to Martin's work, I recently took my car to him and the end results were simply astonishing! I'm sure my neighbours think I'm bonkers because I occasionally just go out and stare at my car in sheer disbelief that the dents are no longer visable. A true master of his craft. Thanks very much

    @FreddieTiffy@FreddieTiffy9 күн бұрын

    • Thank you FreddieTiffy that’s amazing to hear! Thanks for sharing your feedback on my services and your certainly not bonkers you just enjoy your car 🙌🏼

      @dentremover01@dentremover019 күн бұрын

  • Totally amazing work, I never in a million years thought you get that out without paintwork. My mind is blown away.

    @Ian-Hall@Ian-HallАй бұрын

  • Great work ! great video too !! from an old 30 year in the job and still at it ! and still learning :) cheers , Shane

    @bmcbodyshop1@bmcbodyshop17 ай бұрын

    • Hi Shane thanks for your comment! 30 years in the trade wow well done! Plenty of repairs right there!

      @dentremover01@dentremover017 ай бұрын

  • A big 👍 from me, I recently had to use one of these guys in my area on my car, and they're all incredibly talented.

    @paultaylor9652@paultaylor96527 ай бұрын

    • Amazing! PDR is the best method if you have a dent without paint damage

      @dentremover01@dentremover016 ай бұрын

  • Fascinating to watch this no damage repair. Really nice job.

    @knutknutsen5610@knutknutsen561017 күн бұрын

  • You sir, are an artist. Beautiful work.

    @user-ri3dv9id5d@user-ri3dv9id5d27 күн бұрын

  • I’m another who stumbled across this channel, totally blown away by the skill involved and the patience required. Well done, great customer and viewer attitude, and great to watch. I’m going to have to get a dent removal starter kit, if they exist, and have a go at a couple of dents in my car next! I love having a go myself at things on my car, but have to work outside, so it’ll be a Spring project 😂😂

    @budflanagan1262@budflanagan12626 ай бұрын

    • Hi Bud Flanagan thank you so much for your kind comment. Very happy you enjoyed the video and hope you subscribed to our channel 🙌🏼 There’s alot of cheap PDR equipment on eBay etc, always best to practice on a scrap panel first before you try it on your vehicle but certainly try! All the best Martin

      @dentremover01@dentremover016 ай бұрын

  • You just keep getting better and better mate, well done Martin! Nice repair, great explanation and cracking video to watch!

    @LearnPDROnline@LearnPDROnline7 ай бұрын

    • Hi Tom! Hope your well mate and thank you!! I enjoyed making this one! Not filming it though I had so many people come in that day to chat with me and the rain too!

      @dentremover01@dentremover017 ай бұрын

  • A pleasure to watch a craftsmen at work.

    @thomasdavidbassett483@thomasdavidbassett4836 ай бұрын

    • Thank you so much

      @dentremover01@dentremover016 ай бұрын

  • Crazy impressive. He is a very talented artist.

    @jetxenoh2823@jetxenoh282325 күн бұрын

  • One more really amazing repair. I enjoy watching your skills!

    @Unsko-sanski_kanton@Unsko-sanski_kanton7 ай бұрын

    • Thank you Unsko- sanski Kanton 🙌🏼

      @dentremover01@dentremover017 ай бұрын

  • High quality video and really satisfying to watch such a pro at work.

    @petervisi5369@petervisi53696 ай бұрын

    • Thank you kindly Peter 🙌🏼

      @dentremover01@dentremover016 ай бұрын

  • I am learning a lot. People in Europe have incredible skills. Thank you

    @qzqx3047@qzqx30473 ай бұрын

  • watch your videos since your channel opened, glad to see you have more and more subscribers, your hardworking and professional deserve it.

    @user-audiggc@user-audiggcАй бұрын

  • Top quality work! Top quality production! what more can you say 😉

    @1st_track_dents@1st_track_dents7 ай бұрын

    • Thank you Jake 🙌🏼

      @dentremover01@dentremover017 ай бұрын

  • amazing work! I admire these works as a true artist! Well done! May I kindly ask you what lamps do you use? do the ones with the stripes already come out like this or do you apply an adhesive to have the striped effect?

    @uba1988@uba19887 ай бұрын

    • Hi Thanks for your message. The light I use is from Elim a Dent And you can either buy the lenses with lines on, or I personally use 2-5mm black coach lines which are adhesive

      @dentremover01@dentremover017 ай бұрын

  • This is more of an ASMR video than repair work. Man I can watch this all day.

    @gauravkumar3146@gauravkumar314622 күн бұрын

  • Amazing skill and craftsmanship. Hats off to you!

    @bladder1010@bladder101022 сағат бұрын

    • Thank you kindly

      @dentremover01@dentremover018 сағат бұрын

  • it ain't as easy as it looks mate, all the tools needed ain't cheap either. Best to just pay guys like him to work on your vehicles and be happy with it.

    @brucewayne2773@brucewayne27736 ай бұрын

    • Hey Bruce. Yes correct. I show the process and repairs to show the process so customers and viewers see what’s involved. But for a total newbie to do this I’d always recommend speaking to a dent tech first, and then have a practice before trying their own car 🙌🏼 batman

      @dentremover01@dentremover016 ай бұрын

    • I have multiple dent removal tools and have given a go at it on my own vehicles. I still hire dent less removal guys to fix my cars. Not anyone can do it even with the right tools. Training is definitely needed and lots of it. I rather do the body work and paint it if that ends up with a better result.@@dentremover01

      @brucewayne2773@brucewayne27736 ай бұрын

  • Second 😁

    @alexandruszilagyi1176@alexandruszilagyi11767 ай бұрын

    • Thank you!!!

      @dentremover01@dentremover017 ай бұрын

  • Beautiful workmanship by a true master 👍

    @RoadieWingZZ@RoadieWingZZ27 күн бұрын

  • Great workmanship

    @donnareed3822@donnareed382225 күн бұрын

  • excellent patience got the job done. Good skill

    @michaelcrump1288@michaelcrump12883 ай бұрын

  • A true craftsman. Of course he makes it look so easy. Simply amazing. Or as my friends from across the pond would say, “Absolutely brilliant “.

    @martinuribe4722@martinuribe47229 күн бұрын

    • Thank you very much!

      @dentremover01@dentremover018 күн бұрын

  • Nice to see good skills and attention to detail 👍

    @steveburgess9709@steveburgess97093 ай бұрын

  • Wow, a true master at work. Amazing.

    @billsmith6745@billsmith67452 ай бұрын

  • Absolute craftsman at work.. Excellent workmanship.. Really enjoyed your video 😊

    @OH-HELL-NO...@OH-HELL-NO...Ай бұрын

  • Dude this is the second video I watch and im amazed how detailed you are. You sir, are an artist!

    @mnmlbaez@mnmlbaez4 ай бұрын

    • Thank you so much 😀and for watching my video! Hope you subscribed!

      @dentremover01@dentremover014 ай бұрын

  • Sir what a pleasure to see a true craftsman do such a professional repair. Thank you for sharing.

    @MrCabimero@MrCabimero4 ай бұрын

    • Thank you so much for your kind words

      @dentremover01@dentremover014 ай бұрын

  • Wow , this is a highly skilled job ! Congratulations!

    @george1187@george118710 күн бұрын

    • Thank you! Cheers!

      @dentremover01@dentremover018 күн бұрын

  • Hi Martin, it's always a pleasure to watch your outstanding work and videos. As always, thank you for sharing them 🤩

    @franciscoramos226@franciscoramos2267 ай бұрын

    • Thank you Francisco hope your well mate

      @dentremover01@dentremover017 ай бұрын

  • An amazing technique.

    @DavidRobinson-rj2sp@DavidRobinson-rj2sp23 күн бұрын

  • Man, very good, congratulations, amasing woork.God Bless you

    @josedias9458@josedias9458Ай бұрын

  • Listen, you are a master craftsman, what a beautiful work! I wish that even 5% of the dent workshops were close to this level

    @afikzach@afikzach2 ай бұрын

    • Thank you for your kind comment. This is the type of work I produce daily. I take pride in my work. I’m sure the other guys do the same but I can only showcase my work 😉 thanks for watching

      @dentremover01@dentremover01Ай бұрын

  • Perfect video. Great view showing how the lines on the lamp reflect off the panel. I have a very similar dent in my door. Now I know just how to approach it. The local PDR shop didn't want to take it on. Thanks for posting this.

    @NackDSP@NackDSP7 ай бұрын

    • Thank you NackDSP appreciate your kind comment. Just take your time when trying your repair. Did the dent tech say why they wouldn’t fix it for you?

      @dentremover01@dentremover017 ай бұрын

  • Very impressive and a joy to see a professional at work.

    @neilbullock6835@neilbullock68355 ай бұрын

    • Thank you very much Neil 🙌🏼

      @dentremover01@dentremover015 ай бұрын

  • Just saw this and thought 'worth a look' I found myself absolutely gobsmacked, I'd no idea how dents were removed. Such a skill and a very interesting video.

    @haitch04@haitch046 ай бұрын

    • Amazing thank you for your great comment and a pleasure to show you something new!! I hope you subscribed so you can see more in the future 🙌🏼

      @dentremover01@dentremover016 ай бұрын

  • Nicely done! Thanks for documenting the process and sharing it here.

    @RichardHarlos@RichardHarlos4 ай бұрын

    • Glad you enjoyed it!

      @dentremover01@dentremover013 ай бұрын

  • What a great video, thanks for sharing your secrets Mike and demonstrating your amazing skills. Brilliant!

    @jezedwards3858@jezedwards38586 ай бұрын

    • My pleasure! Glad you enjoyed it!!

      @dentremover01@dentremover016 ай бұрын

  • Impressive! Thanks for making the video.

    @alastairwatson3201@alastairwatson32012 ай бұрын

  • Great job fun to see the changes as you work.

    @jbuchan8114@jbuchan811410 күн бұрын

    • Thank you

      @dentremover01@dentremover0110 күн бұрын

  • All I can say is WOW! I never knew about this method of dent repair. Look forward to future videos.

    @crescentmemorials9855@crescentmemorials98556 ай бұрын

    • Amazing! Thank you I’m glad I could show you something new!

      @dentremover01@dentremover016 ай бұрын

  • You make it look so easy. What an amazing skill to have. Thank you for sharing your craft.

    @JamieBainbridge@JamieBainbridge3 ай бұрын

    • Thank you Jamie really appreciate your kind comment

      @dentremover01@dentremover013 ай бұрын

  • took auto body in high school . never seen this type of repair pretty cool repair method . Great work sir.

    @scotted6136@scotted6136Ай бұрын

    • Amazing thank you so much for your comment and enjoying the repair

      @dentremover01@dentremover01Ай бұрын

  • agreed: absolute artist! Can you imagine how many people in the "world" can do this, very very very few!! WOWWWW

    @olegyamleq7796@olegyamleq77966 ай бұрын

    • Thank you so much for your kind words

      @dentremover01@dentremover016 ай бұрын

  • It's fascinating to watch you work the dent out, superb repair.

    @GoodwoodMR2@GoodwoodMR27 ай бұрын

    • Glad you enjoyed it thanks!

      @dentremover01@dentremover017 ай бұрын

  • AMAZING, THANK YOU FOR A GREAT VIDEO.

    @GA-tl4iy@GA-tl4iy3 ай бұрын

  • Thanks, great video. Last year I had part of a chimney fall on my car parked by the side of my house. When it came back from repair, I could not believe they had removed all the dents in the roof. The car looked like it had just come out of a show room. Thanks to you I now know how they did that miracle.

    @SuperBartet@SuperBartet7 ай бұрын

    • Amazing! Glad you were able to have your car repaired and yes! This is how it’s done!! Thanks for watching and commenting 😉

      @dentremover01@dentremover016 ай бұрын

  • I had no idea that such a thing was even possible. To hell with the rabbit and the hat both. You are the worlds greatest magician when it comes to making things disappear.

    @petedowns7183@petedowns71834 ай бұрын

    • Thank you so much for commenting and enjoying the video! My wife can make money disappear quicker than I can repair a dent lol

      @dentremover01@dentremover014 ай бұрын

  • Quite incredible!

    @kevthered4972@kevthered497216 күн бұрын

  • Really nice work buddy, impressive 👍

    @Joethisyear@Joethisyear24 күн бұрын

  • Superb work, and a very well produced video 🎉👍😎

    @Ro32da72@Ro32da723 ай бұрын

  • Amazing work 👌

    @theavenger3363@theavenger3363Ай бұрын

  • That was absolutely crazy to watch. Never have seen that done before. That guys amazing.

    @dwightrapp4788@dwightrapp47886 ай бұрын

    • Thank you!!🤩

      @dentremover01@dentremover016 ай бұрын

  • Unbelievably superb repair kind regards to you and take care Mark from Billericay 😀👍🇬🇧🇬🇧

    @marcusmaximus451@marcusmaximus4513 ай бұрын

  • You are skilled guy right there. Awesome.

    @aarubs@aarubs15 күн бұрын

    • Thank you 🙌🏼

      @dentremover01@dentremover018 күн бұрын

  • don't know how I stumbled across your channel, but watched this one and now subscribed and looking for more satisfying repairs, stunning work

    @viscuine@viscuine7 ай бұрын

    • Thank you very much! I’m very happy you enjoyed my video(s) and you saw something different All the best Martin

      @dentremover01@dentremover017 ай бұрын

  • I can't say I find watching PDR that interesting - I tend to watch tech videos of things I intend doing and I know its a skill that looks easy and is far far from it, i would lose patience and try to rush, but I have to say watching the reflection lines progressing was fascinating

    @m60kaf@m60kaf7 ай бұрын

    • Excellent thank you for watching! It can get a bit boring watching a PDR video so I like to make it a bit different using angles and show you guys what I see. It is a patience game but to be fair when I’m repairing a big job I drift off and think of other things! I watch a lot of engineering vids too 🙌🏼

      @dentremover01@dentremover016 ай бұрын

  • Thank you for sharing your skills.

    @crashaxearmory@crashaxearmory2 ай бұрын

    • My pleasure!

      @dentremover01@dentremover01Ай бұрын

  • Fantastic video, I loved how clearly you explained the process, genuinely fascinating.

    @justblairthompson@justblairthompson7 ай бұрын

    • Hi Blair thank you for your great feedback, your comment really helps me make future videos 🙌🏼

      @dentremover01@dentremover017 ай бұрын

  • To me, it's like magic. Highly skilled work from a highly skilled technician

    @michaelreeves8164@michaelreeves81646 ай бұрын

    • Thank you Michael very kind of you 🙌🏼

      @dentremover01@dentremover016 ай бұрын

  • Absolutely Brilliant

    @robertgalloway5757@robertgalloway57576 ай бұрын

    • Thank you

      @dentremover01@dentremover016 ай бұрын

  • What a satisfying watch. Someone did say to me a few years back that minis were especially difficult with dent removal so this is top work and I may now have to add you to my list of select car related channels I sub!!👍👍👍

    @michael5089@michael50896 ай бұрын

    • Wow thanks Michael! Yes the doors can be a nightmare because they are ultra braced! And a pain to strip the doors too Appreciate your sub and I’ll look forward to showing you new videos asap!

      @dentremover01@dentremover016 ай бұрын

    • @@dentremover01 Thanks!!!👍

      @michael5089@michael50896 ай бұрын

  • I've been in the motor trade 27 years as a technician and have always wondered how you guys manage it and how the line boards work, I very nearly did a PDR course a few years back as I need a change of career due to health problems, But decided I wouldnt be able to complete the course, I might actually do it now after watching this video. Thanks

    @channex8179@channex81796 ай бұрын

    • You don’t need a course. I self taught. If you’re a panel beater then get yourself a few long bars and a simple line board. Practice while you work. I can offer a day or a week course if you feel you’d like to try PDR. I can get you removing a simple dent in a week 🙌🏼

      @dentremover01@dentremover016 ай бұрын

    • @dentremover01 Thank you for the offer I really appreciate it, Unfortunately I'm in Stockport so East Yorkshire is a bit far to travel back and to for a week but I'll definitely give this a go, another feather in the cap and all that.

      @channex8179@channex81796 ай бұрын

  • Amazing Skill

    @ronaldcurry1457@ronaldcurry14572 ай бұрын

  • Fascinating video, being an old school panel beater makes me think I was living in the dark ages! Top class work - genius!

    @alfharris7459@alfharris74593 ай бұрын

  • That is amazing . Never seen this done before !

    @markb1971@markb197122 күн бұрын

    • Welcome to PDR Mark! I hope you watch a few more and subscribe! Thanks so much for commenting

      @dentremover01@dentremover0122 күн бұрын

  • You are the Leonardo Da Vinci of dents Sir. Amazing stuff and so absorbing to watch a master of their craft.

    @grindled@grindled3 ай бұрын

    • Thank you very much for your kind comment and glad you enjoyed the video!

      @dentremover01@dentremover013 ай бұрын

  • Excellent video! Outstanding work!

    @RA-ew8rv@RA-ew8rv4 ай бұрын

    • Thank you!

      @dentremover01@dentremover014 ай бұрын

  • Terrific Job!

    @drdentrepair5530@drdentrepair55307 ай бұрын

    • Thank you Dr Dent Repair

      @dentremover01@dentremover017 ай бұрын

  • mentle work, you guys are clever ❤❤❤❤❤❤

    @user-bi4sg3oc1h@user-bi4sg3oc1h16 күн бұрын

  • Brilliant work 👏👏👏

    @micksidaway@micksidaway6 ай бұрын

    • Thank you 🙏

      @dentremover01@dentremover014 ай бұрын

  • Nice work 👍

    @arbitrator6744@arbitrator6744Ай бұрын

  • Fascinating ! I always wondered how this was done.

    @jp.9664@jp.96643 ай бұрын

    • Thanks for watching and enjoying

      @dentremover01@dentremover013 ай бұрын

  • Excellent. First time I've ever seen it done. It's a mystery no longer. Thanks

    @rasheyes@rasheyes2 ай бұрын

    • Amazing! Thank you for commenting and enjoying the video!

      @dentremover01@dentremover012 ай бұрын

  • Blown away by this great video

    @Invisiblehawk007@Invisiblehawk0076 ай бұрын

    • Thank you! I have another due this week

      @dentremover01@dentremover016 ай бұрын

  • Thanks sooooo much!

    @catboytoys@catboytoys3 ай бұрын

  • Brilliant. Enjoyed vid. Nice to watch a skilled craftsman at work. Really informative.😊

    @andyburkett133@andyburkett1333 ай бұрын

    • Thank you Andy great feedback

      @dentremover01@dentremover013 ай бұрын

  • Wow that was incredible 👍😀

    @dord1954@dord19547 ай бұрын

    • Thank you 🙌🏼

      @dentremover01@dentremover017 ай бұрын

  • Just found your video and what a pleasure too watch a skilled professional at work...👍

    @alanyoung7655@alanyoung76554 ай бұрын

    • Amazing! Thank you so much. Happy new year

      @dentremover01@dentremover014 ай бұрын

  • this is when a "hand-work" is made by an ARTIST... compliments from Italy man! impressive

    @onemaxlight@onemaxlight6 ай бұрын

    • Thank you so much! 😊

      @dentremover01@dentremover016 ай бұрын

  • Great job Martin

    @davebromby6429@davebromby64296 ай бұрын

    • Thank you Dave

      @dentremover01@dentremover016 ай бұрын
KZhead