How to repair cracked vinyl armrest.

2013 ж. 29 Қыр.
206 369 Рет қаралды

Inexpensive way to repair a Chevy Astro armrest. All you need is vinyl from fabric store, 3M adhesive, and latex/silicone caulking.

Пікірлер
  • I was looking for a solution to fix my cracked vinyl without a specific vehicle in mind but funny enough the most helpful video I find is actually on the van I have haha. This must be a common issue with these things

    @lindseyh8617@lindseyh86178 ай бұрын
  • This is what I needed to see to fix my damaged door panel. Thank you

    @ramonjrusa@ramonjrusa2 жыл бұрын
  • You can also use a heat gun to heat the side where you made a seam. if you heat up the vinyl, you can pull on it and stretch it so you have no seam. you heat and pull that corner till it molds and you don't have to cut the vinyl and have no seam. just a tip. pretty good vid

    @raiderman28@raiderman289 жыл бұрын
    • Thanks! There used to be a vinyl seam glue that would seal the seam, but I couldn't find it.

      @jcableman@jcableman9 жыл бұрын
  • Good job sir, thanks for showing that. I was not sure what do with my doors and that would be perfect.

    @shannonleeann5643@shannonleeann56437 жыл бұрын
  • Thanks!! very pleasant on the eyes and ears! You're talented.

    @mistereasy2587@mistereasy25879 жыл бұрын
  • Thanks.. I just bought an astro.. it has some hand rest problems.. I have to find a section that fixes some foam that is damaged too.. but thanks for what you've shown!!!

    @woodsrider117@woodsrider1178 жыл бұрын
  • Great video!! Thanks for posting!

    @fedeled6282@fedeled628210 жыл бұрын
  • I have a 2000 GMC Safari van with the cracked arm rest. I am going to try your method. I have had a temporary fix by taping down a pair of vinyl but as the tape has gotten old, it is coming up. I need to try something else and I will try yours. Turned out great in your video so fingers crossed !

    @PawPrintBx@PawPrintBx5 жыл бұрын
  • nice video!thanks for sharing

    @jsnantic@jsnantic9 жыл бұрын
  • I'm trying to repair an armrest on a car, and need to know the best way of leveling it off before applying the new vinyl? Would like for it to be solid, strong, and sturdy. Some of the foam is missing from underneath the crack and it is concaved. What would be a good product to fill this with?

    @Luke-bx5xm@Luke-bx5xm7 жыл бұрын
  • You are fantastic!

    @extremetruckdriver88@extremetruckdriver886 жыл бұрын
  • Thanks ... nice video!!!

    @iSleepDoc@iSleepDoc10 жыл бұрын
  • These part is $ 13 in eBay

    @Elelyon999@Elelyon9995 жыл бұрын
  • Very nice!

    @1995RangeRover@1995RangeRover5 жыл бұрын
  • Thanks. I have an 87 pickup i need to do

    @OraleIggy@OraleIggy10 жыл бұрын
  • what song is this thats playing?

    @jaggass@jaggass8 жыл бұрын
  • Blue painter's tape woks best, but looks good!

    @davejohnson3860@davejohnson38606 жыл бұрын
  • DUDE! Thank you for this video! Just what I needed. I love the internet

    @abetraven1962@abetraven19624 жыл бұрын
  • I always have admiration for people that make-do or try to make things last (lol....Astro vans discontinued in 2005). We are a society of high disposal and waste and it's arrogant at times. Having said that, I do believe on this particular application, I'd have hopped on the web and ordered a new (or used) armrest for $20.00. Sometimes you just gotta do it. I'm thinking that a few good bakes in the sun and that piece of vinyl will be on the floor. Still gotta appreciate the guy's heart!

    @Glitch-nr9ct@Glitch-nr9ct9 жыл бұрын
  • where did you buy the vinyl from?

    @ForeverGeniusTV@ForeverGeniusTV8 жыл бұрын
    • +Nicholas Owens You can get this stuff in most colours from ebay

      @GollyVids@GollyVids8 жыл бұрын
  • Never had this problem on our astro, but if i do, pretty cool fix.

    @spiffcats@spiffcats8 жыл бұрын
  • Whatta man

    @toshonline5@toshonline59 жыл бұрын
  • Chevy could just avoided all this by having the arm rest removable so could be replaced.

    @laserfalcon@laserfalcon7 жыл бұрын
    • Or building a better product that wouldn't break down as these do.

      @guyfromgalax@guyfromgalax6 жыл бұрын
  • I fiber glassed mine..

    @razziel2010@razziel20107 жыл бұрын
  • . . . . Thanks. so many times these types of item / issues are compared to a half dozen toyotas with perfect arm rests after 250,000 miles poor design even poorer materials in a known high use area and a van that had enough manufactured years to respond to feed back and correct.. but instead, GM headed to capital hill with hat in hand seeking millions in financial relief... . . . and now about the pot metal door handles :0 . ..a door handle- an item used EACH time the van is used and attached to a heavy door knowingly and willingly used cheap materials and owners change out multiple times boggles the mind.... . . "like a ..... "pebble" .

    @MrBluoct@MrBluoct8 жыл бұрын
  • I have a leather repair company , and that's a long way to do a repair and it's not a magnificent job at all ! For instance all you had to do is clean it well sand the whole spot with 400 to 600 finishing sand paper , and use leather or viny compound smoothly on the scratches then sand it down again with 400 to 600 finishing sand paper and dye the color on it 3 times , use a hair dryer each time you dye it and seal it when you finish . My business website is fivestardentwheelleatherrepair I service PA , NJ , N.Y. .I did a lot of work for Bentley , porsch , BMW , Mercedes Benz , Lexus and more . Lisenced and insured.

    @myrthocharles2525@myrthocharles25256 жыл бұрын
    • You may have a leather repair company, but you don't have much tact. Try being nice.

      @davids6533@davids65333 жыл бұрын
  • That's recovered. Not, repaired. Neat job.

    @cravan1982@cravan19823 жыл бұрын
  • what a waste of time go to the wreckers and a cheap armrest just saved 2 hours

    @bigredbomber555@bigredbomber5559 жыл бұрын
    • Paul Williams All Astros have the cracked arm rests, so going to the wreckers to search is a waste of time.

      @jcableman@jcableman9 жыл бұрын
    • Paul Williams you always take risk when going to the junkyard many parts are interior panels are in poor condition.

      @jaggass@jaggass8 жыл бұрын
  • Crap repair

    @anivarhain@anivarhain9 жыл бұрын
    • lol....

      @Glitch-nr9ct@Glitch-nr9ct9 жыл бұрын
    • I think i do have heheheh you have just replaid Hehehe

      @anivarhain@anivarhain7 жыл бұрын
    • It's a great repair depending. It isn't professional, but it's a simple and cheap repair you can do at home.

      @AlexxWretched@AlexxWretched6 жыл бұрын
KZhead