KZhead

Making Rotary Welding Table

Workshop From Scratch
2020 ж. 26 Қаз.
4 311 312 Рет қаралды
Жүктеу

The rotary table is powered by an electric motor from the mobility scooter, the tilt of the table is driven by the wiper motor from the Audi A8 B4. I powered the engines with a 24v / 12v 16.7A two channel power supply, I used a 40A voltage regulator to set the rotation speed of the table top. The table top has a diameter of 800 mm and a thickness of 8 mm, thanks to which the table's capabilities are very large, the table can be used as a welding positioner, as an assembly table or a plasma cutting table, Repair work can be done on the table, and thanks to the electrically adjustable table top, the work is less strenuous.

Пікірлер

  • Amigo, I don't know what kind of Genius you are to work metal, but let me tell you that you are one of the best and how we deserve in our Mexican land. You are !!UN CHINGON AMIGO!!

    @mrb4342@mrb43422 жыл бұрын

  • Having seen your work in the past, I knew it would be a well constructed and useful tool. But, when you added the tilt feature, it went over the top! Well done Sir!

    @TinMan0555@TinMan05552 жыл бұрын

  • Молодец! Супер стол, мечта сварщика! Инструмент и станки твои так и просятся творить чудеса

    @Kokosha3110@Kokosha31103 жыл бұрын

  • You never cease to amaze and inspire and entertain. I only wish you would speak to us as you create. Thank you again for sharing your brilliance! At about 14:30 I realized you were making the work table. I thought, “that might be thick enough if it were 10-12 inches (25-30 cm) or so. But 2 ft? No way.” Then you very creatively used the corners to make buttresses. I thought, “way.”

    @oddjobbob8742@oddjobbob87422 жыл бұрын

  • I was surprised that you did not use thrust bearings for axial load of the table. Other than that, thank you! Your videos are super awesome!

    @_Waldezas@_Waldezas2 жыл бұрын

  • That's got to be the best rotary table I've seen.

    @kelleysimonds5945@kelleysimonds59452 жыл бұрын

  • now having a rotary table makes way more sense after watching this. thank you. I have a motor with a worm gear box that I've been thinking for years what I should do with it. I think building one of these is the plan now.

    @thebonermaker@thebonermaker3 жыл бұрын

    • wetct

      @gilmartramontin2891@gilmartramontin28913 жыл бұрын

    • L

      @edgardoeliecervargasvislan6295@edgardoeliecervargasvislan62953 жыл бұрын

    • @@Inspiracion_ you have crabs

      @Pedro72740@Pedro727402 жыл бұрын

    • I don’t think you understand. I didn’t come here to save Rambo from yo. I came here to save u from him.

      @Pedro72740@Pedro727402 жыл бұрын

  • Está excelente su invención, adelante y ánimo, eso es otro nivel. FELICIDADES.

    @normandjosebustilloherrera2928@normandjosebustilloherrera29283 жыл бұрын

  • Seu trabalho é incrível, parabens

    @chrismaestrelli3943@chrismaestrelli39433 жыл бұрын

  • 20:08 Made my day.What a wonderful welding. This project is much useful than I thought earlier.I have to say this tool /machine is wonderful. keep it up 👍

    @anands6127@anands61272 жыл бұрын

  • EMD'S in Halstead.. that brings back some memories.. hasn't been there for a long time.. lidls now..

    @loonaticsrunningtheassylum@loonaticsrunningtheassylum6 ай бұрын

  • Of all the people I see working on KZhead videos, you 👈 are the best qualified professional, your projects are very well developed and they are very useful complement tools👍

    @Marcelo-56@Marcelo-563 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Professional and capable man. Blacksmith, electricity and controllers. You didn't leave anything to others wow

    @user-bd2yt6rf6e@user-bd2yt6rf6e Жыл бұрын

  • the microphone stand was a nice touch..........................well done

    @stanthur88@stanthur882 жыл бұрын

  • superb work, very enjoyable video!

    @ztyy8185@ztyy81856 ай бұрын

  • Gracias amigo por compartir sus trabajos. Viendo su video uno se da cuenta de todo el trabajo que lleva una maquina y porque tienen el costo que tienen aveces. Saludos desde Mendoza Argentina.

    @gustavoadriangiudice397@gustavoadriangiudice3973 жыл бұрын

  • Fantastic! Multi purpose table which gives, winning edge for precision projects.

    @harvindersingharora3845@harvindersingharora38453 жыл бұрын

    • No it doesn’t.

      @Pedro72740@Pedro727402 жыл бұрын

  • Nice build

    @roberthamblett9619@roberthamblett96193 жыл бұрын

    • Thanks 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • This looks remarkably like a Made In Poland video🤔🤫

    @docokd7oco443@docokd7oco443 Жыл бұрын

  • عبقرية الفكرة وابداع في التخطيط واتقان في العمل سلمت يداك وتحية لك من syria

    @citysad7233@citysad72332 жыл бұрын

  • Awesome build! That unit is so pro man! Great vid, thanks for sharing. Cheers

    @rickpalechuk4411@rickpalechuk44113 жыл бұрын

    • Thank you :)

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Excelente trabajo eres muy preciso en tus trabajos mucha experiencia

    @mauriciomendez9081@mauriciomendez90813 жыл бұрын

  • *VERY CLEAVER AND FUNCTIONAL FOR MANY JOBS...WELL DONE!!*

    @exposingthedarknesswiththe9190@exposingthedarknesswiththe91903 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • best I've seen ya do so far and you have done a lot of good stuff useful stuff. I think this gets at a production level more than all the other stuff so far. near-perfect wields with little effort after the real effort is done is invaluable you could run this thing while getting a lot of little stuff done around the shop. in short, I LIKE IT!

    @ronwhittaker6317@ronwhittaker63172 жыл бұрын

  • Очень круто. Спасибо за видео. Вы вдохновляет многих. Удачи.

    @user-zy7mf9qd7c@user-zy7mf9qd7c3 жыл бұрын

  • Excellent build. I loved the use of materials, and the construction using basic tools available to everyone. This is a very inspired project. Thank you for sharing it with us. Tim

    @MrTIGERH1752@MrTIGERH17523 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

    • Sorry you are wrong, the video is edited . No real fabricator will rely on those mag squares for a start. No showing of plans & drawings either , try to build something like this out of your head , not impossible but very improbable.

      @poontang7546@poontang75463 жыл бұрын

    • @@poontang7546 Poon Tang you are wrong most fabricators use and verify the mag squares to start with. The editing was done well to reduce the length of time it took to buy and load and unload the metal from the truck and removing the gear motors from the vehicles and crimping the lugs on the ground straps. He did show you how he drilled and painted. I am favorably impressed with his editing skills as well as his engineering skills.

      @ernestmurphy3898@ernestmurphy38982 жыл бұрын

  • Absolutely top notch. Innovation;10+. Craftsmanship; 10+. If it's worth doing, do it right and this weld table is all about rugged and versatile. I would pay serious $ to have it in my shop.

    @montwolfman@montwolfman3 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • It's attractive, big enough, and hell for stout! Thanks, JD

    @jdwisdom9433@jdwisdom94332 жыл бұрын

  • Seriously impressive, seriously impressed. Well done sir

    @007paulhopper@007paulhopper3 жыл бұрын

  • Great invention🎉

    @Ahmunsito@Ahmunsito8 ай бұрын

  • When u marked out that SQ piece of steel plate and cleaned it then drilled the holes and cut those perfect slots and rounded the table off by hand with the grinder I could only say WOW!!! Oh my GOD this guy is phenomenal.. Ur builds are so inspiring my friend.. As I'm typing these words I'm actually smiling to myself. U have built some of the best things I've ever seen in videos about metalwork.. I wonder have u ever thought about building a full on milling machine CNC style of even ur own Lathe?? I'm certain it would be another great build from ur good self my friend.. I would love to be learning from a teacher like u if u were teaching this art.. It's a pleasure to watch ur videos pal.. Keep up the great work .. I'm spreading the word as often as I can too. 4.2mil views on this video and I'm only catching it today. That tells u how new to this I really am bro.. LOL.. Salute from Dublin, IRE..

    @reaper060670@reaper06067011 ай бұрын

  • VERY NICE 👍 Really nice 👍 thanks God bless you all sir thank 🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇺🇲🇺🇲🇺🇲

    @JavedIqbal-ne6lb@JavedIqbal-ne6lb2 жыл бұрын

  • That should come in handy for lots of forthcoming projects. nice job! I use to use one of those for welding up lift rods for heavy Equipment.

    @fonhollohan2908@fonhollohan29083 жыл бұрын

  • Awesome build. I can see that coming in handy on future builds. Mad genius

    @benmiller5015@benmiller50153 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • MacGyver gets jealous when he watching his videos !

    @hansoloman@hansoloman Жыл бұрын

  • PLENTY STOUT ENUFF!! GOOD ON YA!

    @jiwbink@jiwbink3 жыл бұрын

  • thanks for sharing ideas and techniques. very helpful

    @bakirbadjou1156@bakirbadjou11562 жыл бұрын

  • I would really love to build a table similar to this. You did a fantastic job showing the basics on how to accomplish this. Thank you so much for making this video, and by the way could you please give me some idea of what this would cost in materials using US dollars. Thank you so much.

    @STRATTONSGARAGE@STRATTONSGARAGE2 жыл бұрын

  • I don't think this guy really plays these videos 2 or 3x faster there speed, I actually believe he is that good. Pure AWESOMENESS!!!

    @silvergrizzly316@silvergrizzly3163 жыл бұрын

  • Man this is a SERIOUS piece of machinery! Very well planned and executed 🙌🏻

    @Thewatson77@Thewatson773 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • I'm stunned at how well you've thought out this project . Keep up the fabulous work.

    @pierdolio@pierdolio3 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Your a mad scientist amazing work as always.

    @Atr42Greasemonkey@Atr42Greasemonkey11 ай бұрын

  • Sangat mengesan kan ,cara Anda bekerja ,Trima Kasih Atas Info my , Smoga Anda Suxes slalu ,..

    @syamsurisyam8280@syamsurisyam828011 ай бұрын

  • This is the kind of content I hope to find on KZhead. Excellent work!

    @lyteyearz5810@lyteyearz58103 жыл бұрын

  • ไอเดียแจ๋วมากคุณหรั่ง

    @user-yo4lw9df8x@user-yo4lw9df8x2 жыл бұрын

  • Thanks 🤩😍🤩 عمل رائع شكرا لك اخي

    @user-kt2hb8xr3p@user-kt2hb8xr3p3 жыл бұрын

  • Excellent work! Thanks for sharing!👍

    @wittemotor100@wittemotor1003 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Exelente idea amigo Saludos desde PERÚ!!!

    @riterfranachoreyna5865@riterfranachoreyna58653 жыл бұрын

  • the tutorial is very helpful. thank you. I hope you are always creative!!!

    @rekzaprokonveksisablon1278@rekzaprokonveksisablon12783 жыл бұрын

  • Excellent Job! ... I just wish I had all the metal for all the projects he does! ..LOL! .. Great Video .. Keep up the "GREAT" work!

    @dougdroneflyer5807@dougdroneflyer58072 жыл бұрын

  • Parabéns! Incrivel!

    @holiveira5743@holiveira57433 жыл бұрын

  • Amazing, useful tool! And, it took only a little over 20 minutes to build. I should have mine ready to use by tomorrow. :-)

    @Patriottoo2@Patriottoo23 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

    • Ha ha ha, i am sure. It took weeks to build this from paycheck to paycheck to buy the steel and components, and planning the next steps.

      @ernestmurphy3898@ernestmurphy38982 жыл бұрын

  • Un genio 👏👏👏 capo capo !!!! Un saludo desde Argentina

    @martinibarrola7789@martinibarrola77893 жыл бұрын

    • จรัญ/รอดตะเภา/ดี/ดี

      @user-jb5oy1xz1h@user-jb5oy1xz1h2 жыл бұрын

  • Wow, this is truly a Man sized rotary table. Put a couple of kids on top and spin them till they were sick! Too much fun. I have one constructive criticism. Instead of square headed cap screws, try black round headed cap screws. They won’t stand out as much but do exactly the same job. Brilliant work overall and so well done. Cheers.

    @petermarsh4993@petermarsh4993 Жыл бұрын

  • Ein super Teil, sehr gut konstruiert und angefertigt. Werde ich nachbauen!

    @norbertcoy1775@norbertcoy17752 жыл бұрын

  • The speed at which you work is incredible ; )

    @gregmiller4332@gregmiller43323 жыл бұрын

  • Good job

    @SFCrafting@SFCrafting3 жыл бұрын

  • MUY BUENO Y SOBRE TODO QUE PERMITIO EN SU MAYORIA VER COMO LO INICIO DEDE CERO, FELICITACIONES, DESDE COLOMBIA

    @javierreyesperez6744@javierreyesperez67443 жыл бұрын

  • Trabalho muito bom. Parabéns

    @pauloamaral8780@pauloamaral87803 жыл бұрын

  • You are a master builder! Awesome!

    @11sprials11@11sprials113 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Très fort. Bon courage d'Algérie.

    @baobel9056@baobel90563 жыл бұрын

  • Great job. Only thing I can think of to add is some concentric circles scribed into the table for easier setups

    @colinabell3672@colinabell36723 жыл бұрын

  • Excellent idea for help in the workshop. Well done.

    @faniepretorius5534@faniepretorius55343 жыл бұрын

    • Thank you :)

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • wow hand made very creative good job 👍👍👍

    @jayaken7355@jayaken73553 жыл бұрын

  • Great Job

    @ahmedwaly9073@ahmedwaly90732 жыл бұрын

  • Prosty pomysł, a jaki przydatny!!!

    @tatusiowyteatr@tatusiowyteatr Жыл бұрын

  • Merci beaucoup pour la vidéo

    @keupondestroy911@keupondestroy9112 жыл бұрын

  • Bardzo dobra robota👌👍👏👌👍👏 super ogląda się twoje filmy pozdrawiam

    @michalrakowski3720@michalrakowski37203 жыл бұрын

    • Dziękuję 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Champion!! Well done. I loved your video, you have good hands and you are very talented. I loved what you built, it looks super quality!

    @DIYFixMan@DIYFixMan3 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Это лучший вариант позиционера что я видел!

    @igory17@igory173 жыл бұрын

  • Super Salam from Tajikistan

    @Rich_0505@Rich_05053 жыл бұрын

  • Excellent build mate I would love one of these

    @davedunn4285@davedunn4285 Жыл бұрын

  • Bravo.... ottimo lavoro

    @quinto1910@quinto19102 жыл бұрын

  • Основательно и добротно! Не совсем понятно зачем такой толстый металл для корпуса, но видимо так задумано! Классный стол, молодец!

    @metallrabotka7823@metallrabotka78233 жыл бұрын

  • Очень интересный вариант,у автора талант! Жаль что не могу на его языке высказать благодарность за идею.пусть удача ему сопутствует во всех его начинаниях!

    @user-hy6zn9nl3j@user-hy6zn9nl3j3 жыл бұрын

    • Спасибо 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Bel lavoro.Molto talento e precisione.

    @MrLucius3247@MrLucius32473 жыл бұрын

  • Good jobs...KREATIF....😚😚

    @daudefendy3072@daudefendy30723 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • what kind of taps do you use? sorry if this has already been asked. You are a master at the stuff you build

    @flanagin_the_bot1188@flanagin_the_bot11882 жыл бұрын

  • now i want this well done, overkill yes its perfect

    @GabbyTech@GabbyTech3 жыл бұрын

  • fantastic work, well done

    @richiedwards4953@richiedwards49533 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Очень тонкий металл используется автором.Можно сказать почти фольга!Этот стол точно не выдержит локомотив😂😂

    @user-dg1xp8hp6e@user-dg1xp8hp6e Жыл бұрын

  • Nice project, I can see many hours of thought to get things right. Thanks !

    @hfdzl@hfdzl3 жыл бұрын

  • Amazing work💪👍

    @danushkaprabath1020@danushkaprabath10202 жыл бұрын

  • What can I say well done may man well done, New Zealand

    @alistairfurnell126@alistairfurnell1263 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • руки золотые, голова на месте👍

    @alexkiller9051@alexkiller90513 жыл бұрын

  • Parabéns show ! Projeto muito bem , 👏👏👏🤝🤝🇧🇷🇨🇮

    @joaomaglianooliveira1348@joaomaglianooliveira13482 жыл бұрын

  • Очень крутые инструменты.А главное,что все работает очень точно.

    @tamerlanhan35@tamerlanhan353 жыл бұрын

    • Ну по сравнению с заморчью функционал ни о чем.

      @user-fp6sz6lp9f@user-fp6sz6lp9f3 жыл бұрын

  • I viewed this at 50 & 75% rate just to take it all in. Very fascinating.

    @nevadabadger7925@nevadabadger79252 жыл бұрын

    • I find myself looking at the other tools you have fabricated. The drill press, the tables.

      @nevadabadger7925@nevadabadger79252 жыл бұрын

  • Muito show, parabéns trabalho incrível

    @django902@django9023 жыл бұрын

  • Time saving... Brilliant idea....

    @dodlaisdodla@dodlaisdodla3 жыл бұрын

  • Мастеру браво и респект. Молодец. 👋👋👋👍👍👍🤝🤝🤝

    @user-cc1vc5ks5i@user-cc1vc5ks5i2 жыл бұрын

  • That’s a wonderful piece of craftsmanship!

    @BrutusMetalArt@BrutusMetalArt3 жыл бұрын

  • Jak zawsze robota wykonana na 100%👨‍🏭

    @rafaantczak3050@rafaantczak30503 жыл бұрын

    • Dziękuję 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

    • @@WorkshopFromScratch może kiedyś i ja zbuduje taki obrotnik nieraz by sie przydał przy jakiś pracach

      @rafaantczak3050@rafaantczak30503 жыл бұрын

  • Precision !!! Good jobs !!!

    @aslanbalik952@aslanbalik9523 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Extraordinario !!!!

    @MrMidonka@MrMidonka3 жыл бұрын

  • Talent!

    @donsmith9081@donsmith90813 жыл бұрын

  • Brilliant. A pleasure watching you working.

    @MrMultiblades@MrMultiblades3 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

    • Wow have a nice job.welding...

      @zalgin_6473@zalgin_64733 жыл бұрын

    • And design

      @zalgin_6473@zalgin_64733 жыл бұрын

  • Nice work

    @tomdesantis938@tomdesantis9382 жыл бұрын

  • Another great project build. Very nice work indeed.

    @MickMcMadder@MickMcMadder3 жыл бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch3 жыл бұрын

  • Nice table

    @3rdlegCosimo@3rdlegCosimo3 жыл бұрын
KZhead