How To Make A Perfect Knife From 10 Metal Drills?
2024 ж. 17 Сәу.
149 126 Рет қаралды
How To Make A Perfect Knife From 10 Metal Drills?
My Other Knife Videos:
Incredible Custom-made Knife That I Made In 1 Day: • Incredible Custom-made...
Mega Sharp Dagger Made Of Damascus Steel: • Mega Sharp Dagger Made...
Created an Incredible Dagger with a Brass Handle from an Ordinary Piece of Metal: • Created an Incredible ...
Creating an Unrealistically Sharp Knife from a Piece of Metal and Bamboo: • Creating an Unrealisti...
I Made An Incredibly Sharp Knife Out Of An Ordinary Piece Of Metal: • I Made An Incredibly S...
Our Facebook: / knives.project.channel
#knife #sharp #metal
The guys on this channel have hammers and anvils, but the only way I ever seen any of make a knife is to forge a rectangle then grind a knife shape into it. Also, why are they always i in such a hurry showing the finished product? I mean, you gotta look real fast to see all the de-lamenations and cold shuts. WoW, that thing really tore through that paper. 🤣🤣🤣 A real work o fart.
So where can we view your work? I’d like to be able to compare build quality.
Okay but you can only form an opinion once you post your work to be compared... See how dumb that? I don't need to be a dancer to know laying down isn't a cool dance to watch
Looked like a pretty clean weld to me,
Show us how it’s done
Клинки из быстрорежущей стали - самые качественные 💪👍
Даже близко нет
Sir very nice Knife but Two things to try ,instead of using the Can Damascus try Stainless Steel Clamps then fold. Last please use Pins to hold handle to knife with your Epoxy
thats supposed to be only 10?
good looking blade design
Muy bueno colega yo también después del templado lo pongo en arena,vos por qué lo haces no se si era arena o acerin ?🔪🤠🤜🤛🇦🇷
what does dipping the harden blade in the saw dust do
Un cuchillo muy atractivo amigo ✌️👍👍👍
Very beautiful knife, great work
How much do you want for that piece of art?
Nice work
Magnifique j'adore ❤
На сколько я знаю, у сверла верхняя часть из мягкого металла сделана, а нижняя из крепкого.
Always a pleasure to see his works of 🖼️ art!
Beautiful Knife. I would have taped the handle before epoxy and mixed the epoxy on something other than my vice,.
You should make a retracting kyokestu-shoge you use it like the regular weapon but use something to retract it back to u like a tape measure kinda then you could use the force of it retracting to hit anything behind you
Honestly always hate videos like these where they don't actually forge the blades out. sure its Damascus but not even a high layer count, minimal effort. At that point just get a slab of 1095 and a cnc machine and cut the knifes out of it.
So how many have you fully forged.???
Forging a blade out to a refined shape is, for sure a skill on it's own. Just like getting a nice, clean pattern weld is. But there's only so many skills you can show off on one knife at the same time before they start detracting from each other. In this case, forging it out would have reduced the appearance of the pattern
Yeah he’s not a real smith
Does it cut glass that is the question. Even kitchen knives can cut plastic bottles and paper if sharpened well.
Gorgeous knife but would never trust any knife without a mechanical connection of at least one pin
You are worried about the handle? He never tempered the blade! Why put a good handle on a wall hanger?
does that slow belt sander get a bit annoying? the last one I got is slow like that and gets on my nerves, it takes forever to get anything done with it. you've got the touch with that angle grinder. profiling something like that is a lot more difficult that it looks. maybe not as hard as forging the shape out but definitely a skill. the large choil is nice, I like that. I don't trust epoxied handles at all. scales with pins or paracord wrap or burn in with a pin. nice work though, very good.
creo que no es muy funcional y le faltó mucho filo
Красотень
Really cool knife . two 👍👍up 😎😎😉
Very nice!
Nice !
This is different for mee
nice
he put more than 10 in the pipe
"It will keal."
100% perfect , this time
100% perfect??? It can't even cut paper!!!
Awesome Job!!👍
Another masterpiece, keep up the good work.
O bıça o sap olmadı
Actually you used 30 drill bits instead of 10 😅😅😅
He never tempered the knife, it is for looks only.
Maybe, if it was at his tempering temp, after the quench, that was his purpose to stick it in the sawdust, or what ever that was. There are similar techniques that use the remaining heat after the quench to create the temper. This wouldn't be my technique. But it could work, if you know what you are doing.
How do you know he didn't? Because it wasn't shown in the video?
Какая то кустарщина
Should have taken the can off. Then twisted it since it was made from drill bits. The hammered it to shape not cut it. Then if you feel you must grind the bevels. I would have hammer formed my bevels and fuller also. Then ground it to expose the bits inside. That is what forging is. You forged a bullet Then cut out a knife. I have 38 years experience as a bladesmith. No I have not taken the ABA test, but I assure you I am in fact a master bladesmith. I don't use power tools. All my forge work is by hand and hammer, all my grinding is with files and stones, all my finish work is with hand tools the way bladesmithing is ment to be. Any other way you are a machinist not a Smith period.
You should also ride on a horse and use candles for light….. dude matters is end result we have developed tools for a reason. Why do you hate so much
Put a guard on your grinder ! Stupid not to .
First
They changed the steel with another piece, these were not the drills.
more like 30