Make it for Defense

2024 ж. 20 Сәу.
3 157 691 Рет қаралды

Slingshot Channel

Пікірлер
  • When I was 11 I made a thing like this. It shot shotgun shells. Before I triggered it the first time, a voice in my head said, "Don't do it". Terrified, I took the things apart and disposed of it. I'm 80 now, and I heard that voice only one other time, about 30 years later.

    @wilstjb3122@wilstjb31227 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow7 күн бұрын
    • What happen about that 30 years later ?

      @buenasnoticias9093@buenasnoticias90937 күн бұрын
    • Was 30 years later at the altar?

      @robwithanr5685@robwithanr56857 күн бұрын
    • @@robwithanr5685You beat me to it. I was sure the voice was saying, "Don’t marry her!"

      @michaelgoble8200@michaelgoble82007 күн бұрын
    • More like "Don't kill her". Or himself possibly?

      @larryfromboston7578@larryfromboston75787 күн бұрын
  • The faith you have in superglue is inspiring.

    @gabedom_@gabedom_14 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow14 күн бұрын
    • 7 drops held a 4000lb car off the ground on mythbusters

      @MrMiguella@MrMiguella11 күн бұрын
    • Cyanoacrelayte is extremely strong.

      @christophergromiuk8473@christophergromiuk847311 күн бұрын
    • Me trying to unstuck my fingers rn:

      @thiago32994@thiago3299411 күн бұрын
    • I have faith in superglue...when it's used the proper way. Gluing wood is not that way.

      @mrblanche@mrblanche10 күн бұрын
  • Vampire Slayer, Werewolf Hunter and possibly on the FBI watchlist! That craftsmanship is crazy!

    @judgeharrell46@judgeharrell464 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow4 күн бұрын
  • I'd be glued to everything 5 minutes into this

    @raymondstrehl3679@raymondstrehl36797 күн бұрын
  • When I met my wife she had a Spanish guitar with a neck that was broken loose from the body. Since I had two perfectly fine specimen myself I decided to give it a go with superglue, removed the strings and glued it together. Then added the strings and put the guitar in our crewroom at work for anybody to use it. That was 12 years ago now and it is still solid as a rock. Being a technician I see what our crew wrecks on a daily basis and I do trust superglue on wood 100%!!

    @vincidicaprio298@vincidicaprio2987 күн бұрын
    • Thanks for watching🙏🙏🙏

      @diycrossbow@diycrossbow7 күн бұрын
    • Good to know!

      @willnotquit@willnotquit7 күн бұрын
    • 3:09 3:18 3:56

      @nemezioluciofavero7617@nemezioluciofavero76175 күн бұрын
    • When he was putting the little magnet in should he not have put the glue between the wood and the magnet instead he put it over the top ?

      @davidmccann2633@davidmccann26335 күн бұрын
    • ​@@davidmccann2633No, you really just want to anchor it, you can't really glue a magnet with cyanoacrylate, it does not have tixotrophic properties on such a material.

      @vincidicaprio298@vincidicaprio2985 күн бұрын
  • People will criticize you no matter what you do . Excellent work

    @annemorrison9922@annemorrison99228 күн бұрын
    • Well said. The internet seems to bring out the worst in some people. Thanks for taking time to be positive

      @jonathanclark6652@jonathanclark66528 күн бұрын
    • Thanks my friend🙏

      @diycrossbow@diycrossbow8 күн бұрын
    • Criticism makes you better. It makes you realize your mistakes and how to improve them. The problem is that people are so thin-skinned now that any criticism is taken as "verbal abuse."

      @jbilletz@jbilletz7 күн бұрын
    • @@jbilletz yeah, there's a difference.

      @jonathanclark6652@jonathanclark66527 күн бұрын
    • And some will only critique.

      @geclay8996@geclay89967 күн бұрын
  • ATF be, "It's a firearm!" OP : "Technically, it's a crossbow." Judge : "He's technically correct. The best kind of correct."

    @gorilladisco9108@gorilladisco91086 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow6 күн бұрын
    • In Canada it is a slingshot until the moment you put a crossbow bolt in it. Then it becomes a restricted weapon.

      @aspy6860@aspy68605 күн бұрын
    • @@aspy6860 you failed already in the first 2 words of the sentence XD if it has anything to do with a trudeau you ffed up...

      @jaquesmerde9146@jaquesmerde91465 күн бұрын
    • @@aspy6860 Canada is in big trouble. I will pray you get your freedom back.

      @ManannanmacLir69@ManannanmacLir695 күн бұрын
    • @@ManannanmacLir69 I was born in Detroit, was plinking with my .22 at ten and grew up enjoying guns so I get ya, but ... my reality is that I find that living in a culture with far fewer guns gives me more freedom, not less.

      @aspy6860@aspy68605 күн бұрын
  • awesome build! but i'd put a thin plastic or rubber tube around the screws. in time the threads may cut through the loop in your rubber band.

    @WillSurvive2TheEnd@WillSurvive2TheEnd9 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow9 күн бұрын
    • I was just about to comment the same.

      @Lookin4LoveInAllTheWrongPlaces@Lookin4LoveInAllTheWrongPlaces8 күн бұрын
    • Ha, that was the only bit where I thought, no, I'd do it differently, with a smooth bolt or sleeve. Fun watch.

      @urgemore@urgemore7 күн бұрын
    • @@urgemore great minds think alike!

      @WillSurvive2TheEnd@WillSurvive2TheEnd7 күн бұрын
    • I suppose it's only human that I find the making of weapons soothing.

      @ChrisGurin@ChrisGurin7 күн бұрын
  • Some people say your a hero, I say your a warrior an australian warrior thank you Nick.

    @godisourfather9376@godisourfather9376Күн бұрын
    • Thanks my friend🙏

      @diycrossbow@diycrossbowКүн бұрын
  • I had a lovely wooden desk with a wooden door. Somehow someone broke the door. Well, it was amazing how a colleague fixed it. Skills. In the past there were so many more we have lost.

    @kevindarroch7332@kevindarroch73322 күн бұрын
  • This would make the perfect apocalyptic weapon for sure

    @jamessharier7529@jamessharier75297 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow7 күн бұрын
    • lo mismo pense ¡¡

      @cesarbajana2337@cesarbajana23375 күн бұрын
  • In my Country , just owning this i would end up in Jail or a massive fine....Great work all the same,,, cheers

    @Orionneb@Orionneb10 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow10 күн бұрын
    • same in UK

      @fredtedstedman@fredtedstedman9 күн бұрын
    • Same in Sweden.

      @johanolofsson8558@johanolofsson85589 күн бұрын
    • То же самое в России.

      @user-yl5ob4tp3j@user-yl5ob4tp3j9 күн бұрын
    • Oder Deutschland

      @maxmustermann8290@maxmustermann82909 күн бұрын
  • Somehow Canada would find a way to make this illegal

    @kelbale@kelbale6 күн бұрын
    • I'm certain it's already illegal.

      @Loader138@Loader1386 күн бұрын
    • Hey…we’re just trying to enjoy our syrup and Tim Hortons up here eh…

      @stevelacy137@stevelacy1375 күн бұрын
    • It is illegal!

      @BobSmith-ui4qu@BobSmith-ui4qu5 күн бұрын
    • where I live they made this illegal, sling shots are considered weapons..

      @urbnctrl@urbnctrl4 күн бұрын
    • 110% true! Here in Canada we love to spoil your day...so have a beautiful "Shitty" day eh!

      @rickrodrigues2219@rickrodrigues22194 күн бұрын
  • It's very nice and would be helpful if you share the wood's template.. Thank you for sharing..

    @juliandono8986@juliandono898610 күн бұрын
    • Use your limited brain power and create your own template from the concept. Clearly you have zero engineering skills and even less talent. Stick with what you know and stop being mentally lazy. Besides which - better to stay OUT of trouble - than build devices that will ensure you are imprisoned for being in possession of an offensive weapon - imprisonment would for a very long term should you cause grievous bodily harm - even in a self0defense situation - use of excessive force can lead to a prison sentence - So don't be STUPID

      @andrew_koala2974@andrew_koala29747 күн бұрын
  • Thank god! Now I am calm, and I can not be afraid of being attacked by balloons, or empty tin cans 😁

    @sergeyborod6165@sergeyborod61658 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
    • You made me laugh dude 😅

      @Shambo805@Shambo80517 сағат бұрын
  • I'd also like the blueprints on this! So sweet!

    @barburso7184@barburso71848 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • If I would have to play bass guitar in that band I'd probably build that gun, too!

    @InTheSh8@InTheSh87 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow7 күн бұрын
    • 😂

      @Liliedugg@Liliedugg2 күн бұрын
  • The gun they gave gator after his desk pop lol

    @joepena2140@joepena214011 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow11 күн бұрын
    • "But they're so convincing!" 😂

      @Sgt.Lincoln_Osiris@Sgt.Lincoln_Osiris9 күн бұрын
    • IK THAT REFERENCE WILL FARREL IN THAT SCENE WAS FUCKING HILARIOUS

      @numb3rsix664@numb3rsix6648 күн бұрын
    • Best scene ever when Samuel L. Jackson and The Rock jump off the building like they they’re superheroes… 😂😂😂

      @soiltek2015@soiltek20157 күн бұрын
    • @@soiltek2015 "You thinkin what I'm thinkin?"

      @rh3ttj@rh3ttj3 күн бұрын
  • I would like to get the plans for this. Are they available?

    @theodoreyoung7946@theodoreyoung794610 күн бұрын
    • @theodoreyoung7946. The plans are not available to minors like you.

      @redblade8160@redblade81608 күн бұрын
    • Exactly what I was thinking! I will end up just guessing, but it would be nice to have some specs. Like what did he use/where did he getting the bands for the stored tension? That's all I really need. Saving the video to a "Projects" folder.

      @DM-wp9vq@DM-wp9vq7 күн бұрын
    • ​@DM-wp9vq if you figure out the bands, please come back and let us know. I doubt I will ever actually make 1, but i am curious about the bands

      @zeusdarkgod7727@zeusdarkgod77277 күн бұрын
    • Is abstraction difficult.

      @othmanhassanmajid8192@othmanhassanmajid81926 күн бұрын
    • Not that i needed in florida but following

      @uscroger4690@uscroger46906 күн бұрын
  • Very Cool. A Template and some dimensions would be great, if you have the time.

    @catmando4914@catmando49149 күн бұрын
    • Use your limited brain power and create your own template from the concept. Clearly you have zero engineering skills and even less talent. Stick with what you know and stop being mentally lazy. Besides which - better to stay OUT of trouble - than build devices that will ensure you are imprisoned for being in possession of an offensive weapon - imprisonment would for a very long term should you cause grievous bodily harm - even in a self0defense situation - use of excessive force can lead to a prison sentence - So don't be STUPID

      @andrew_koala2974@andrew_koala29747 күн бұрын
  • The way you was tapping the tin can, I expected a scantily clad lady to appear 😅when it popped

    @alanwilkinson9487@alanwilkinson94878 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • Thumbnail had me thinking this was click bait for the first few minutes. Nice work this is some creative and clever craftsmanship.

    @johnnyRandomadness@johnnyRandomadness9 сағат бұрын
    • Thanks

      @diycrossbow@diycrossbow4 сағат бұрын
  • This guy is a master of his craft. And makes doing this look easy!

    @Shambo805@Shambo80517 сағат бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow17 сағат бұрын
  • Great design. I would add a hollow magazine inside the grip for ball bearing shot and two extra bungee bands

    @user-bh7cs4dp2r@user-bh7cs4dp2r7 күн бұрын
    • did you know you can add a magazine with several stored tensioned springs/bands which cycle upward when shooting so it operates as semi-auto?

      @trashcanmucous5153@trashcanmucous515316 сағат бұрын
  • the device is interesting. is it possible to download ready-made drawings of this device somewhere?

    @denisravens2826@denisravens28268 күн бұрын
  • Amazing work. Some people criticize because that is the only thing they know how to do in life. Again, very very nice work!

    @MrAJM728@MrAJM728Күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow17 сағат бұрын
  • Excellent craftsmanship! You're a real gunsmith! I would want to buy this amazing crossbow!

    @iv3599@iv35997 күн бұрын
    • Thanks. It sale in Indonesia only

      @diycrossbow@diycrossbow7 күн бұрын
    • ​@@diycrossbowkalau mau beli dimana om?

      @real_dd6451@real_dd64516 күн бұрын
    • @@diycrossbow Nang ndy

      @auraajah3072@auraajah30726 күн бұрын
  • Having a quiver full of those arrows, you'd be unstoppable. Just pew pew pew...ftw. "Find out" man is what they'll call you.

    @jaybingham3711@jaybingham37118 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • An impressive piece of work. Convenient that you had all the necessary pieces of the right size. Remind me never to make you angry.

    @michaelgoble8200@michaelgoble82007 күн бұрын
  • Great video and great slingshot pistol! My son is into archery and likes to build things. He'll love your channel. Very inspiring. I agree with the conenters that would like to see a part list or plans. Keep up the great work!

    @georgeseal8463@georgeseal84638 күн бұрын
    • Thanks brother🙏

      @diycrossbow@diycrossbow8 күн бұрын
  • Nice invention With very very nice background music

    @rajasarfraz3948@rajasarfraz394814 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow14 күн бұрын
    • Who says the background is nice must start again, from the kindergarten era, learning what music is ! That one is a mere shit computer sound repetition. 🤮🤮🤮 On the contrary, the vid content is interesting👍, at least's been made by human skills 👏

      @toro5338@toro533811 күн бұрын
    • I know, right? What immensely brilliant music! I couldn't stop dancing. It was so incredible. I bet it won a Grammy. My grandmother didn't agree though. She didn't like the music at all. Probably because she had diarrhea, again.

      @Bhatt_Hole@Bhatt_Hole10 күн бұрын
    • has already been invented centuries ago dude

      @cusoonmyfriend3738@cusoonmyfriend37389 күн бұрын
    • The music sounds like a rip-off of August 10 by Khruangbin, made just different enough to get past the copyright detector. Seriously, have a listen and you'll see what I mean.

      @brothersoulshine@brothersoulshine8 күн бұрын
  • Very very terrific, no other words to describe 👍👍

    @SamMonkulas@SamMonkulas8 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow7 күн бұрын
  • Thanks for including link for this very relaxing music, it's great! Your crossbow is petty cool too.

    @harryschaefer8563@harryschaefer85633 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow2 күн бұрын
  • Can you send drawings and parts list?, love the creativity!

    @Goldenbrown134@Goldenbrown1347 күн бұрын
  • Very nicely made and crafted , very skilful !

    @theflyinghamster8442@theflyinghamster84428 күн бұрын
    • Thanks my friend🙏

      @diycrossbow@diycrossbow8 күн бұрын
  • Technically he is building an official John Wick hypersonic pencil launcher! By using nails it should penetrate 3/8" of mild steel!!!😅

    @josephmarino3045@josephmarino30459 күн бұрын
    • Drugs are bad

      @annwitzel9630@annwitzel96307 күн бұрын
  • Might be interesting if all the necessary details were provided. For example, the exact outlines and measurements seem like a good place to start.

    @dalemullen96@dalemullen969 сағат бұрын
    • Thanks

      @diycrossbow@diycrossbow4 сағат бұрын
  • I am rolling on the floor from the staggering awesomeness of all these things you can make.

    @inkey2@inkey23 күн бұрын
    • Thanks for watching🙏🙏🙏

      @diycrossbow@diycrossbow2 күн бұрын
    • No you're not. You're sitting on the sofa admiring it , the same as the rest of us

      @peterherrington3300@peterherrington33002 күн бұрын
    • @@peterherrington3300 I don't even own a sofa....I am on a raw wooden floor

      @inkey2@inkey22 күн бұрын
  • Hi can you send drawings Thanks

    @yankl1@yankl110 күн бұрын
  • I'd be using Titebond III Ultimate for sure, but in Australia, crossbow is heavily frowned upon by the law 😬😉

    @MNCPMSteve@MNCPMSteve8 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow8 күн бұрын
    • compound bows are legal Cheers Steve nsw

      @Stevos_HookedonRods4844@Stevos_HookedonRods48442 күн бұрын
  • A new meaning to "im going to nail you" 🤣

    @NATEZPLAZE@NATEZPLAZE2 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow2 күн бұрын
  • Cool, the only thing is that you should cut small metal tubings to protect the elastic from those 2 front agressive screws that are holding the elastic in place.

    @birdman7083@birdman70832 күн бұрын
  • A man with hands and a head. Brilliant.

    @z-lupa@z-lupa7 күн бұрын
    • Thanks my friend🙏

      @diycrossbow@diycrossbow7 күн бұрын
    • Человек с оружием - это человек без головы! Однозначно!😡👎

      @bcde737@bcde7376 күн бұрын
  • Меня больше клей заинтересовал 😊

    @hardrush970@hardrush9708 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
    • На Озоне - "Клей для творчества OKONG "

      @viktorsvetlov80@viktorsvetlov807 күн бұрын
    • Обычный цианоакрилат

      @vmaxi7625@vmaxi76256 күн бұрын
    • 🙃Ага! В этом Видео как раз Интересен Клей: берёт и Дерево и Дерево, Металл с Деревом! 😁Раньше был такой - Н-88! А сейчас? И кстати Тов. работает с этим клеем без перчаток и клей не берёт пальцы! Возможно склейка монтажа?😁🤣🙃

      @igorartemov9187@igorartemov91874 күн бұрын
  • Could be wrong but I would put a protective layer over the screw threads. The exposed threads will eventually lead to faster failure of the banding.

    @ygrittesnow1701@ygrittesnow17018 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • Seit wann klebt man Holz mit Sekundenkleber? 🤔

    @ehcsemak3917@ehcsemak39177 күн бұрын
    • Since I be video maker

      @diycrossbow@diycrossbow7 күн бұрын
  • Creative & Defence.....GOOD WORK 👍👍

    @husainiIbrahim-wl8nd@husainiIbrahim-wl8nd8 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow8 күн бұрын
  • smooth brain: making a gun out of gun Galaxy Brain: W O O D

    @monsterfukk7737@monsterfukk77378 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow8 күн бұрын
    • What retains the loose projectile from falling out?

      @marryellen7713@marryellen77136 күн бұрын
  • Cute. Proof of concept works, so make a longer barrel and use two screen door springs. Buy a bunch of solid aluminum knitting needles, remove the top end, then sharpen the points . Now you've got a man-stopper.

    @hootinouts@hootinouts2 күн бұрын
    • Thanks

      @diycrossbow@diycrossbowКүн бұрын
  • The wood work is beautiful...i'm just not sure about the glue type and longevity. There is no doubt to its potential in defense!

    @michaelkaiser1864@michaelkaiser1864Күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbowКүн бұрын
  • I don't know man the overuse of superglue just triggered me 😁 What? No? Oh ok I'll get my coat.

    @Bluebuthappy182@Bluebuthappy1828 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • Sir i need one for my personal use, please send it to me and i will send the money , thank you

    @alexisarnedo4380@alexisarnedo438014 күн бұрын
  • I’d really like to get a set of plans for this, it’s quite amazing what can be accomplished with minimal power tools and a Dremel!

    @jackdurden466@jackdurden4667 күн бұрын
  • Make it for defence Killers: "... What do you mean"

    @m_ravenswood@m_ravenswoodКүн бұрын
  • This is not for home defense; this should be a constitutional carry! Less lethal first; if the aggressor doesn't get it; Rambo mode! Awesome job Sr!

    @Strategies_Estrategias.@Strategies_Estrategias.6 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow6 күн бұрын
    • well said!

      @johnlombardo7816@johnlombardo78166 күн бұрын
  • Love the fact that some crucial parts could be replaced if broken, due to usage of screws.

    @chebypattern@chebypattern13 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow13 күн бұрын
    • ​@diycrossbow Do you have any drawings or plans? I'm telling you people would pay good money for them.

      @joshhuskins5363@joshhuskins53639 күн бұрын
    • До шурупов спускового крючка нет доступа, а он первый выйдет из строя, так как деревянный

      @MadebyBelarus@MadebyBelarus9 күн бұрын
  • no balloon will mess with my home after this

    @aleksszukovskis2074@aleksszukovskis20748 сағат бұрын
  • Do you have any dimensions or plans/drawings to offer or is this merely for viewing entertainment?

    @mr.kimber44@mr.kimber448 күн бұрын
  • That s great. Now I can defend myself being attacked by aggressive air balloons. Reminds me of an old Monty phyton scetch.

    @Guiltank@Guiltank7 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow7 күн бұрын
    • If you have an issue in your federal or state background check that keeps you from obtaining a legal firearm , this may give you peace of mind. Also remember that the political left wants you to smoke pot but they want to take away our guns. Those that are capable will invent what is necessary.

      @jonpotter570@jonpotter5707 күн бұрын
  • Интересно, сколько это чудо в джоулях выдаёт 🤔 наверняка запрещёнка

    @humorduck2@humorduck28 күн бұрын
    • Тут видимо зависит от резинок( пружин).

      @user-xk8uf8mw9j@user-xk8uf8mw9j6 күн бұрын
    • очень мало.

      @mishelle771@mishelle7716 күн бұрын
  • very creative.. I regret not having so much articulation to do the same

    @carlosneydeoliveira8909@carlosneydeoliveira89098 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
  • Could you share the figure you used with the measurements pls

    @netten2057@netten20579 күн бұрын
  • Hi pls insert the measurments & components of the gun ❤❤❤❤

    @elbhzz5895@elbhzz589514 күн бұрын
    • Plans pleases.

      @aaronhenderson8502@aaronhenderson850214 күн бұрын
    • Why don't yall donate instead of sitting there thinking everyone's work is free 😒

      @bigv1@bigv112 күн бұрын
    • ​@@aaronhenderson8502 he already showed y'all the breakdown ... you can figure out the rest on your own ... if you had a brain.

      @rudamchu@rudamchu10 күн бұрын
  • *Please take a measurement of the bullet departure speed of each homemade and show it at the end!*

    @alexandr___s5229@alexandr___s522914 күн бұрын
  • I wish it was a full guide rather than skipping parts out but it looks great

    @Chaos_Senpai@Chaos_SenpaiКүн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbowКүн бұрын
  • We had a similar kinetic g

    @karaz7477@karaz747715 сағат бұрын
    • Thanks for watching🙏

      @diycrossbow@diycrossbow13 сағат бұрын
  • No me canso d ver este tutoial maestro gracias desde lima peru

    @juanpabloserranoquispe48@juanpabloserranoquispe4814 күн бұрын
    • Thanks for watching🙏

      @diycrossbow@diycrossbow13 күн бұрын
  • Any drawings, measurements etc available? Thanks.

    @dietmarthies7564@dietmarthies756410 күн бұрын
  • I would like the PDF to show how to make this and complete parts list please

    @greggm1232@greggm12329 күн бұрын
    • just curuiiouys anhd why would you not just buy a gun

      @JohnDoe-mp1zk@JohnDoe-mp1zk8 күн бұрын
    • @@JohnDoe-mp1zk Versatility. In a SHTF situation ammo is not going to be readily available. This seems to allow for a variety of projectiles.

      @ygrittesnow1701@ygrittesnow17018 күн бұрын
    • Me also

      @bigmarkthe1@bigmarkthe18 күн бұрын
    • @@JohnDoe-mp1zk Because woodworking ist fun. And there are places where you can't "just buy a gun".

      @frankbauerful@frankbauerful8 күн бұрын
  • Now thid is dope great production 🤜🏼🤛🏼

    @crosxroadhxrmony@crosxroadhxrmony2 күн бұрын
    • Thanks

      @diycrossbow@diycrossbowКүн бұрын
  • Nicely done, but how much superglue de-bonder was used on stuck fingers during its manufacture?

    @MervynPartin@MervynPartin5 күн бұрын
  • Self-defense against drunk squirrels.

    @tiddybearkush@tiddybearkush8 күн бұрын
    • Really? Try standing as a target from 2 meters away then. I wonder what will happen to ur 🧠

      @user_xsr@user_xsr8 күн бұрын
    • Never underestimate the power of a drunk squirrel!

      @garettfunk4889@garettfunk48898 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
    • And just wait for the zombie squirrel apocalypse!

      @wayne9518@wayne95188 күн бұрын
    • @@wayne9518next tutorial: wooden machine gun

      @therealloganyt237@therealloganyt2377 күн бұрын
  • Это реклама чёртового клея!

    @Vadim_Lev@Vadim_Lev7 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow7 күн бұрын
  • That is good, question , where do you get the spring and other accessories to purchase.

    @franklinsimpson9357@franklinsimpson935710 күн бұрын
    • hardware store

      @bmxerkrantz@bmxerkrantz10 күн бұрын
    • I can see getting everything except the elastic sling hardware

      @royallplatnum@royallplatnum9 күн бұрын
  • Por favor disculpe podría decirme que pegamento usa, es increíble y me gustaría saber cuál es para comprarlo aquí en Colombia. Gracias amigo. Video muy instructivo.

    @ottoeugenioduranrevellon8524@ottoeugenioduranrevellon85248 күн бұрын
    • Cyanoacrilate🙏

      @diycrossbow@diycrossbow8 күн бұрын
  • I wish that you had chipped in and were talking as you were making this or post schematics.You did a great job for sure!

    @user-yp7ke9sk8b@user-yp7ke9sk8bКүн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbowКүн бұрын
  • Should make a video how you make those springs

    @scrqqge@scrqqge11 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow11 күн бұрын
  • I would like to see the drawings of your products. Even an experienced craftsman will not be able to repeat it just by looking at it!

    @StandUpShorts37@StandUpShorts3713 күн бұрын
    • Любой школьник это повторит! Если руки из плеч растут, а не из...

      @Nili-mot@Nili-mot8 күн бұрын
    • Its not rocket science. Anyone with access to the pause button and a hand saw could follow this.

      @ec4020@ec40208 күн бұрын
    • @@Nili-mot ну так повторите, потом скажете легко ли без чертежей или хотя бы размеров сделать это.

      @StandUpShorts37@StandUpShorts377 күн бұрын
  • How much did they say they wanted from the Coolass crossbow pistol? OR The Blueprint at best

    @wildcard5269@wildcard52696 күн бұрын
  • At first I was like WTF is this going to defend against... Then he pulled the broad head out 😮

    @QuestionableStudios@QuestionableStudiosКүн бұрын
    • Thanks for watching🙏

      @diycrossbow@diycrossbow17 сағат бұрын
  • “Any one of these is ideal for home defence.”

    @OliverTrist@OliverTrist8 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow8 күн бұрын
    • Against....Wife !? 😂

      @kenzo2297@kenzo22977 күн бұрын
    • I got it if no one lese did lol. I'd much prefer a "Phase plasma rifle in the 40watt range" or an "Oosy nine millamater"

      @mackychloe@mackychloe7 күн бұрын
  • Excellent work friend!

    @cyncitynv7413@cyncitynv741314 күн бұрын
    • Thanks my friend🙏🙏🙏

      @diycrossbow@diycrossbow13 күн бұрын
  • It's a good design and shoots really good! But it's better to use nails and glue for wood to hold it together! Super glue sips through the pores of wood, leaving only a small amount to keep the parts together!

    @Trabunkle@Trabunkle4 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow4 күн бұрын
  • May I please have the plans for this? Beautiful work!

    @donnaschartung836@donnaschartung8366 күн бұрын
  • Plans please?

    @indigos290@indigos2908 күн бұрын
    • You just saw the plans dude

      @draventhore353@draventhore353Күн бұрын
    • @@draventhore353🤭🤭🤭🤭

      @labete1075@labete107522 сағат бұрын
    • Some people work better with actual plans that include measurements and so on. Not everyone is as amazing as you, being able to replicate it from a video. Forgive us our weaknesses amazing one

      @Linkenstein06@Linkenstein0621 сағат бұрын
    • This is pretty simple tho. Simple shapes and you can use foam board first to mockup the size till you find a size that fits you personally. This one ain’t rocket science.

      @diegosanchez8673@diegosanchez867320 сағат бұрын
    • Pause and screenshot

      @braq9775@braq977513 сағат бұрын
  • And that's for "defense"? 😳...

    @sinuanuy7885@sinuanuy788510 күн бұрын
    • Defence against mice 😅

      @nigelskinner8799@nigelskinner879910 күн бұрын
    • Stand in front of the arrow at the end and tell me how useless it is then.

      @OffGridInvestor@OffGridInvestor8 күн бұрын
  • Step 1: Understand the god’s work of gorilla glue

    @UltracoreUltraUranium@UltracoreUltraUranium3 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow2 күн бұрын
  • Excelente trabalho artesanal. Voce poderia passar as medidas de cada peça utilizada na construção???

    @samuellacerda9391@samuellacerda93917 күн бұрын
  • Now im sad 😞 I want that gun ❤

    @Lovely_lulu_@Lovely_lulu_14 күн бұрын
  • You can't stop watching👀👏

    @MARVELSWOODEN@MARVELSWOODEN13 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow13 күн бұрын
  • Very clever… a clean well engineered design.

    @aerialcat1@aerialcat15 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow5 күн бұрын
  • Wife: Do you remember the two most devastating words you've ever spoken? Husband: I do !

    @tedmeeuwsen712@tedmeeuwsen71223 сағат бұрын
    • Thanks for watching🙏

      @diycrossbow@diycrossbow17 сағат бұрын
  • 🎉🎉🎉

    @user-ww2fm7zo7v@user-ww2fm7zo7v14 күн бұрын
    • Thanks🙏🙏🙏

      @diycrossbow@diycrossbow14 күн бұрын
  • That's never going to defend anyone, but will definitely hurt someone.

    @mante6458@mante64588 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow8 күн бұрын
    • Never? Lols im pretty sure you'll be out if that arrow landed anywhere on your head..

      @d4thetesor778@d4thetesor7788 күн бұрын
    • come on. Don’t be so serious, it is just an interesting toy

      @23113@231137 күн бұрын
    • ​@@d4thetesor778imagine it landing right in someone's soft eye balls. It's definitely going all the way in.

      @adad1adads@adad1adads7 күн бұрын
    • ​@@adad1adadsnow imagine you missed, what then? This is a toy

      @nunyabusiness6691@nunyabusiness66916 күн бұрын
  • Yes, because everyone cuts wood expertly and accurately. And also has high performance elasticy things with loops on them. And barbed stainless steel arrowheads. On the plus side I do have superglue. In a cupboard somewhere. I think I do. Yes definitely. Somewhere.

    @TheRealSlimSteve@TheRealSlimSteve3 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow2 күн бұрын
  • IDK definitely moderate defense with those tri arrow tips you got there

    @user-oz4qy2wn6u@user-oz4qy2wn6u7 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow7 күн бұрын
  • Unless your name is Hawkeye, this is not stopping a grown man

    @Baptiser@Baptiser11 күн бұрын
    • Thanks

      @diycrossbow@diycrossbow11 күн бұрын
    • Here in New Zealand a few years ago, a drug dealer killed a Policeman with an air rifle. I think you may be surprised what can stop a grown man.

      @tutekohe1361@tutekohe136110 күн бұрын
    • ​@@tutekohe1361I'm not from N.Z. but I remember hearing something about that. Kind of like bringing a knife to a gun fight. At least than 25 feet away I'd rather have the knife. Be up on you but before you can pull out a gun youll have several holes in you. Not you personally. Just saying you as a figure of speech. I did see a video where a guy had a knife against five armed police officers that already had their weapons drawn. The police didn't have a good day. He stabbed 3 or 4 of them before they got off a shot. When they did shoot they missed knife guy didn't. 2 of the police died. 2 others gravely injured. Dude brought a knife to a gunfight and pretty much won even though he was finally subdued.

      @elliott9139@elliott91398 күн бұрын
    • @@tutekohe1361 It took multiple shots on the same point whilst the victim was pinned down.

      @nickmansfield1@nickmansfield18 күн бұрын
    • @@nickmansfield1no, it was a single shot from the corner of the house. The Policeman was standing in the driveway having just finished planting a tracking device on the guy’s car. The guy didn’t know the Policeman had died until his friend heard it on the radio later.

      @tutekohe1361@tutekohe13618 күн бұрын
  • coba tembakin ke kayu bang 😁

    @its_faad_tmzn3339@its_faad_tmzn333914 күн бұрын
    • Thanks🙏

      @diycrossbow@diycrossbow14 күн бұрын
  • GREAT WORK!!!! Would you provide a scale plan?

    @jeepochta@jeepochta4 күн бұрын
  • I learned to make Japanese Shurikens and throw them at a certain distance for accuracy.

    @allenmontalvo8355@allenmontalvo83552 күн бұрын
    • Thanks for watching🙏

      @diycrossbow@diycrossbow2 күн бұрын
KZhead