KZhead

How to make castle joints on a table saw

The Dusty Lumber Co
2019 ж. 24 Қаз.
807 099 Рет қаралды
Жүктеу

Dusty demonstrates how to make castle joints on a table saw
For more woodwork videos subscribe to our channel! Dusty gives step by step instructions on how to build as well as woodworking tips and tricks and tool reviews!
Links to tools Dusty uses:
Makita track saw with 5' track: amzn.to/2VRj46j
Makita 10' track for track saw: amzn.to/31n0JPq
Makita track saw clamps: amzn.to/2MPkgmp
Makita 6" sander: amzn.to/2OXvOXm
Makita cordless planer: amzn.to/2nTyE4C
Makita cordless trim router: amzn.to/2IX75P8
Makita cordless drill set: amzn.to/2MQyCCV
Makita cordless random orbital sander: amzn.to/33D7Qop
Makita cordless jig saw: amzn.to/32qNe2u
Products Dusty uses on projects:
Wood Wise black filler: amzn.to/2oGyluB
Varathane satin polyurethane: amzn.to/33FR886
Osmo polyX finish: amzn.to/2NgZk80
Table top epoxy: amzn.to/2Nc8rXM
To subscribe to our channel click here: / @dustylumberco
To follow us on Instagram click here: / dustylumberco
To follow us on Facebook click here: / dustylumberco
Our website can be found at dustylumberco.com/
Want to learn how to make a barnwood door check out this video: • How to build a barndoo...
and here: • How to build a barndoo...
Want to learn how to make a cool two step barnwood stool check out this video: • How to build a reclaim...
Want to learn how to make some barnwood countetrtops click here: • How to build barnwood ...
Want to see how to cut a slot in the bottom of your barnwood door check out this video: • How to cut a barndoor ...
#joinery #woodworking #woodfurniture

Пікірлер

  • I realize this is from several years back but my son asked for a 6’ long by 4’ wide L shaped computer/homework desk. His only other request was that it didn’t shake. 6 castle joints later and you had better not run into it because whatever body part hits it will lose. Extremely strong joint. Thanks for the education.

    @clayhicks1676@clayhicks1676 Жыл бұрын

    • And another year on and I'm about to use 8 of these joints for a new worktop. I'm fairly certain it's going to be pretty solid.

      @daveawb@daveawb2 ай бұрын

  • Brother , you are the man! I love your videos. I learn so much. You make me want to quit my job and become your helper! Love your work!!!!

    @mrknbham@mrknbham23 күн бұрын

  • I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great kzhead.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

    @morinbaptiste636@morinbaptiste6369 ай бұрын

  • To other KZhead video producers, this is a Goldilocks video. Not too long, not too short, not too complex, not to simple, just right. Have to try this joint out. Thanks.

    @mikewurlitzer5217@mikewurlitzer52173 жыл бұрын

    • Thank you so much!! I was hoping ti find a nice balance where it’s not over explained but not under explained 👍

      @dustylumberco@dustylumberco3 жыл бұрын

    • @@dustylumberco You did very well. Not only explaining your equipment, but how one could replicate this technique at the novice level with a basic table saw and a little attention to detail.

      @waynetadlock9719@waynetadlock97193 жыл бұрын

    • So true...This is a strong, pretty joint that everyone should try just for the heck of it. The key is in the measuring and cutting. No matter what tools you use to get the job done, the age old advice to “measure twice and cut once” is imperative. In this case you might even want to “measure thrice and cut once”.... it couldn’t hurt.

      @ebutuoy6463@ebutuoy64633 жыл бұрын

  • This table arrived well packaged and on time. kzhead.infoUgkxn94T8Mu1iMnsLCMNOI9srXSsLkI4JXKW Like another reviewer advised, I pulled everything out and made sure everything was included (everything was!). I built it alone and it took me about an hour. The color is great and for the price the lift part works well. As others have mentioned, it’s not the smoothest opening/closing, but it works. The screws do show, but I plan to order white sticker covers if that bothers us too much. Really happy with this table! UPDATE: it’s been over a year since we got this coffee table and we still love it! It gets HEAVY use as our dining table, foot rest, and school desk. Over time, the opening and closing mechanism has gotten smoother. I added a new photo with the white screw cover stickers. They blend in perfectly and make it look a little cleaner. 100% recommend!!!

    @jenmclernon9249@jenmclernon92499 ай бұрын

  • Fantastic workmanship. You've given a detailed explanation of the project unlike any I've seen in many many years! Keep up the fine work

    @joethomas3962@joethomas39623 жыл бұрын

    • Joe Thomas thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

    • Even I understood 😊 thanks a lot

      @mariecohen3052@mariecohen3052 Жыл бұрын

    • I am looking to make a tea box that would contain tea boxes and honey pots What wood do you recommend and what type of closing or lock should I buy 🎃

      @mariecohen3052@mariecohen3052 Жыл бұрын

    • Do you have any idea how satisfying it is to see these joints go together like butter? Also do you find the mechanical pencil is more precise than a carpenter’s pencil?

      @scottdrysdale923@scottdrysdale9234 ай бұрын

  • Exactly the project I am undertaking - thank you for the easy to follow process!

    @craigmills1813@craigmills1813 Жыл бұрын

  • Thanks for explaining this joinery. I’m going to use this on my next project. Great explanations!!

    @zaffman@zaffman3 жыл бұрын

    • David Zaffery you bet!! I’m glad it was helpful!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Love this joint. I am build a workbench for my new shop and will use this for the base/legs. Great lesson and instruction. Thanks

    @davidlangston6927@davidlangston69273 жыл бұрын

    • Thank you!!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • I like your channel and your style. I find it interesting you don’t use a lot of fancy expensive layout tools, you just have so much experience to use a speed square and a pencil and achieve excellent precision. I can tell you are production aware but skilled enough to achieve precision. Doing it fast, precise and once.

    @bldrtom@bldrtom Жыл бұрын

  • After watching your video, I watched several others, as I'm about to take my first stab at castle joints. Yours was by far the best and easiest to follow.

    @timothyanderson6301@timothyanderson63013 жыл бұрын

    • Thanks so much!! I’m glad to hear it!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • that looks so cool. I'm making a storage chest for my project, and this video explains how the joints are made, so well. Thanks so much.

    @JinNOSify@JinNOSify3 жыл бұрын

    • 👍👍👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • 🌲🍀A quality video, showing a nice high quality fitting castle joint. I liked that you talked about the joint not being too tight so as to avoid future cracking & breakage. The round overed edges look nice, but back in the day, they didn't have powered sanders not even sandpaper (or glue), and they would have used (l know, you know this) a block plane, or more likely a chisel to break the corners, and probably pegged this joint, or used a wedged "tusk" or "through" tennon joint to hold it all together. But a thumbs👍for a concise, very informative table saw & sander video😎🍀🌲.

    @johnadamski4012@johnadamski40122 ай бұрын

  • I'm learning a lot from you, thanks.

    @TheToolBoxWhisperer@TheToolBoxWhisperer6 ай бұрын

  • Thank you for explaining the castle joint with a table saw cutting. I just marvel at your expertise with working with wood. You truly are a Master Craftsman in wood. I too enjoy your you tube channel. Thank you for allowing us to come into your work room and share your space. Peace and safety be with you always.

    @deejensen5006@deejensen5006 Жыл бұрын

  • Looking to build a bed with castle joints, this way l was exactly the clear instruction I needed!

    @zzyzxensis@zzyzxensis Жыл бұрын

  • That looks great! Very unique...

    @valveman12@valveman123 жыл бұрын

  • Very cool, and well explained. Trying this now. Thanks for posting

    @Joestacemazjojo@Joestacemazjojo3 жыл бұрын

    • Joe Balch thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Been looking into this joint, thanks for the video!

    @mastermno5@mastermno54 жыл бұрын

    • Keith Long you bet!! 😀

      @dustylumberco@dustylumberco4 жыл бұрын

  • Very good at explaining everything definitely easily picking up what your putting down, excellent woodworking man!

    @tristanwaun19@tristanwaun193 жыл бұрын

    • Thank so much!!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Love that cross cur guide. Thanks for sharing!

    @Markomyt1@Markomyt13 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thank's for using a decent camera, not to mention the clear, concise, instructions.

    @robertpelland5649@robertpelland5649 Жыл бұрын

  • Thanks for the great video! I have the perfect application for the castle joint. Been wanting to try this.

    @philgoulding5219@philgoulding52193 жыл бұрын

    • Awesome!!! Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Simple and beautiful. Thank you!

    @chetnash5991@chetnash59913 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thanks for giving me another way to use my multitool.

    @jerryjones7293@jerryjones72933 жыл бұрын

    • 😁😁😁👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Beautiful. Really great explanation. Thank you. This will be a joint I will be attempting. It looks challenging.

    @dcalihou1998@dcalihou19983 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Dude - as a beginner woodworker who loves the smell of sawdust, I am really digging your videos. I purchased your mobile table saw/flip miter saw work bench plans with the castle joints. It looks kind of intimidating, but what the hell. Gonna give it a try and hope for the best. Thanks for sharing your knowledge and experience with all of us.

    @stevepieri3536@stevepieri35362 ай бұрын

  • Thank you!!! Finally someone that speaks my language. 🙌 I find it difficult for things to make sense to me, but you did it flawlessly.

    @depressionnow8290@depressionnow82903 жыл бұрын

    • I’m glad it was helpful !

      @dustylumberco@dustylumberco3 жыл бұрын

  • What a brilliant video. And well executed too, the explanation is spot on. My Father was a Cabinet Maker, sadly I did not inherit his skills. Thank you I have subscribed.

    @THEJR-of5tf@THEJR-of5tf3 жыл бұрын

    • Glad you enjoyed it!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Very good detailed work, thank you for taking the time to put this video together and share it with the interested audience. Awesome job

    @ersingokay2670@ersingokay26703 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Really nice table joinery, next summer I might give this a try

    @jamessharier7529@jamessharier75293 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Great vid. Thanks! I'm going to try these joints on a bed frame my wife wants.

    @154Jamesp@154Jamesp4 жыл бұрын

    • James Pelosi awesome!! Thank you!

      @dustylumberco@dustylumberco4 жыл бұрын

    • One of the things that I learned from making a bed frame many years ago is that if you don't constantly keep thinking about the ability to disassemble it, you will find out that you have a bed in a room that cannot be moved into a new room (or a new house) withing taking a saw to it and destroying the bed. When I started the project, I had *intentions* for it to be something that could be disassembled, but somewhere along the way in the expediency of getting it done, that kind of got pushed to the side. If I was doing it again, I would probably use a design that used wedges that could be knocked into place to lock the components together. As in everything else in life, there are always compromises...

      @CurmudgeonExtraordinaire@CurmudgeonExtraordinaire3 жыл бұрын

  • Thank you very much I appreciate all your help

    @TheDonweld@TheDonweld2 жыл бұрын

  • Excellent Video you've created!! I absolutely thrive on the unwavering, "Detail" your explanation with exactly what to do. How I wish more woodworking videos of others would not leave out those small details leaving myself with questions. You Nailed this! with No questions within your video. Well Done!!! I've subscribed because of that. Cheers, and Thank you. You make an excellent teacher!!

    @dwdw4499@dwdw44993 жыл бұрын

    • Thank you so much! I really appreciate it!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Simple incredible joint! Can't wait to use it on something lol great explanation as well

    @jasonkoontz4095@jasonkoontz40953 жыл бұрын

    • Thanks so much!

      @dustylumberco@dustylumberco3 жыл бұрын

  • AWESOME video! Thanks for sharing your technique.

    @pnwRC.@pnwRC.3 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • I like all your short vids as well as longer silent vids- but it was nice to hear your thought process on this one too. Great content, thank you. PS your fancy sliding table saw has for a while had me dreaming about how I could build a slide for my 1980’s craftsman 113 hahaha…gotta dream big

    @ERone43@ERone438 ай бұрын

  • I love your table saw set up! 😍😍😍

    @acornhomestead3575@acornhomestead35753 жыл бұрын

    • Me too!!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • I really appreciate this video man. from Calgary thank you

    @Mayonnaise69@Mayonnaise693 ай бұрын

  • Great job on the joints and the video. Just amazed at how all of these commenters are all experts on how they would have done it just a little better, however, I cannot find a single video from any of them showing me how they did do it better. Again, good work.

    @braniganblue3460@braniganblue34603 жыл бұрын

    • Thanks!! Yes it is mysterious that most people that are critical and harsh are also the ones that post no content themselves - presumably their work would all be absolutely flawless

      @dustylumberco@dustylumberco3 жыл бұрын

  • I've gained an interest in woodworking lately and have been looking at a lot of videos, just trying to get an idea what I'm getting myself into. I've never heard before that it's possible to get a joint too tight, and what will happen if I do. What a valuable piece of information!

    @JEBavido@JEBavido3 жыл бұрын

    • Hello! Yes you can definitely get a joint too tight and it will cause your wood to break and crack

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thanks for the knowledge. Great work!

    @cedarskydesigns@cedarskydesigns Жыл бұрын

  • " use a multi tool like a pioneer" Cracked me up dude! Marking across the grain with a knife lessons the possibility of tear-out too. Nice work!

    @markbowman3@markbowman33 жыл бұрын

    • 😁😁👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

    • I thought it was funny as well, but I prefer videos like this where it’s “real” instead of so edited down they look fake! By him saying that, it just shows like the rest of us, he has great ideas but he makes mistakes too! But yes def funny comment!

      @natemartin7697@natemartin76973 жыл бұрын

    • @@natemartin7697 thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

    • He said like an old pioneer after he said "a chisel and a hammer".

      @markarita3@markarita33 жыл бұрын

    • Hey I'm not knocking the guy. I just found that funny!

      @markbowman3@markbowman33 жыл бұрын

  • I found you on TikTok and now im watching you on KZhead. Great content!! Im new to wood working so please keep on teaching!

    @joelkooienga87@joelkooienga873 жыл бұрын

    • Awesome! Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • I just came across you’re channel, I’m a contractor/wordsmith hobbiest, love the shop, good work!

    @matthewhegstrom8478@matthewhegstrom84783 жыл бұрын

    • Awesome! Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thanks mate, I stumbled across this video while looking for something else but I have always wanted to try this joint in a table. Your video, and the way you made it, meant it was really easy to follow along and now i'm *almost* confident I can try it myself. Anyway, you've got a new subscriber, cheers mate!

    @OzSawdustMakers@OzSawdustMakers4 жыл бұрын

    • Oz Sawdust Makers thanks so much! I’m glad it was helpful 👍

      @dustylumberco@dustylumberco4 жыл бұрын

  • Top.. Top.. Top... Vou copiar! 👍👊

    @marcelo_rcosta@marcelo_rcosta3 жыл бұрын

  • I used the same joints for the base of my workbench. Solid! Never knew what they were called, I just conceptualized them intuitively.

    @arthurboddie5261@arthurboddie52613 жыл бұрын

    • That’s awesome 👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Excellent, your explanation is very understandable .. maybe one day of this I will do it and I will send you a photo of the work! keep it up .. your channel is fantastic!

    @ChannelWalking@ChannelWalking3 жыл бұрын

    • NEO32 awesome!! Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • That's a great quick castle joint. If the cross beams were narrowed where they go through the legs to leave a shoulder that registered on the outside of the legs, it would greatly increase strength and rigidity from what you have here. It only costs slightly more time and complexity.

    @jjbailey01@jjbailey018 ай бұрын

  • Thank you for your video very instructive

    @jonathanbailey5896@jonathanbailey58963 жыл бұрын

  • Nice video. Clear and Concise.

    @Linghunt2@Linghunt23 жыл бұрын

    • Thanks!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Very helpful video, thanks.

    @ronlutz2879@ronlutz28794 жыл бұрын

    • Ron Lutz thank you!

      @dustylumberco@dustylumberco4 жыл бұрын

  • Nice joint. Thanks

    @SOLT_Mark@SOLT_Mark4 жыл бұрын

    • SO LT 😀😀👍👍thanks!

      @dustylumberco@dustylumberco4 жыл бұрын

  • Nicely done. Good video. Clear, concise and easy to understand. Good craftsmanship. Have fun, be safe.

    @wrongfullyaccused7139@wrongfullyaccused71393 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Nice tip with the multitool 👍. Excellent quality video mate thanks a lot. 🙏

    @paulriggall8370@paulriggall83703 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Awesome explanation and demo. I was thinking of using a dowel in instead of the screw to solidify the joint

    @rickkern5785@rickkern57855 ай бұрын

  • I always suspected that you had a Makita track saw before you went full Festool, and this video confirms it 😂. I love Makita, great video btw, the best I’ve seen on castle joints.

    @TiffMcGiff@TiffMcGiff8 ай бұрын

  • Great video. I love the way you explain, step by step. American English accent is the best accent in the world.

    @HS-yk9he@HS-yk9he3 жыл бұрын

    • Thank you! My accent is Canadian though 😁

      @dustylumberco@dustylumberco3 жыл бұрын

    • @@dustylumberco I'm originally from the southern most part of Canada (AKA, Wisconsin) and I could detect the distinct Canadian accent. About =Aboot, etc.. LOL Great video BTW!!

      @paul-ld9vh@paul-ld9vh3 жыл бұрын

    • @@paul-ld9vh thanks 👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • I see i have changed . Now I am back . I do like all wood work projects . I do not always comment on each one but I do like this one .

    @garygomer9682@garygomer96823 жыл бұрын

    • Thanks

      @dustylumberco@dustylumberco3 жыл бұрын

  • Would love to see those 188 “genius” faces that pushed the 👎 on such a 💎. But it takes a talent to recognize the value. Go Dusty, go ... and THANKS for sharing! 👍👍👍

    @splanzza@splanzza3 жыл бұрын

    • Thanks so much👍 lots of critics these day 🤷‍♂️

      @dustylumberco@dustylumberco3 жыл бұрын

  • These look awesome!

    @ryananthony4840@ryananthony48402 жыл бұрын

  • Very well explained,thanks

    @bobjones8864@bobjones88643 жыл бұрын

    • You are welcome

      @dustylumberco@dustylumberco3 жыл бұрын

  • Really Nice Thank You!!😊

    @raymondpetracca6208@raymondpetracca62083 жыл бұрын

    • Raymond Petracca 👍👍🙏

      @dustylumberco@dustylumberco3 жыл бұрын

  • Because of this video, I am adding ya, subscribing and will share your video for others to follow! This is amazing! I had never seen this type joint. My workbench is sturdy, I used 2x4 and 4x4s to make it. But it has a tad bit of wobble. Now as soon as my shop is ready and Xmas is over, I’m rebuilding it with these joints! They look super duper sturdy! I look forward to more videos and ideas! Thank you!

    @natemartin7697@natemartin76973 жыл бұрын

    • Thank you! Yes it’s nice sturdy joint 👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Simply outstanding work it's gorgeous table . May God continue to bless you and all your work.👍👍🙏🙏

    @patrickarchuleta9594@patrickarchuleta95942 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco2 жыл бұрын

  • THANK,S FOR THE GREAT VIDEO; LEARNED ALOT; PATRICK.P

    @patrickpeterman4890@patrickpeterman48903 жыл бұрын

    • 👍👍👍🙏

      @dustylumberco@dustylumberco3 жыл бұрын

  • First time I’ve seen one of your videos. Really enjoyed it !

    @timhepworth7867@timhepworth78673 жыл бұрын

    • Thanks so much!

      @dustylumberco@dustylumberco3 жыл бұрын

    • Same here, I understood it right from the start, nice.

      @grantw.whitwam9948@grantw.whitwam99483 жыл бұрын

    • @@grantw.whitwam9948 thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • great video thx for posting

    @pauldejesus9644@pauldejesus9644 Жыл бұрын

  • Great stuff. Thank you.

    @ceonach@ceonach3 жыл бұрын

    • 👍👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Come on, pretty good, you do awesome work!

    @grobertson2008@grobertson20084 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco4 жыл бұрын

  • Thanks for sharing, I'm making a table saw and was wondering what kind of joinery to use. I'm keen on doing this one now, seems easy enough for a beginner like me. It reminds me of kumiko which I've been playing around with, and I love joinery that doesn't involve anything other than wood. You got another subscriber 🙂❤️

    @aeonyoda@aeonyoda3 жыл бұрын

    • Thank you!! Good luck!

      @dustylumberco@dustylumberco3 жыл бұрын

  • I am the guy who has the luck that the wood breaks . Lol. For today 23Nov20, I totally enjoyed this video. Having recently moved, I have little furniture to set up. I much prefer to make my own tables and such. This type of Joint, just looks good. I am able to set up a dato stack as well. Anyhow great video. Good audio. Good lighting. Good material .

    @hudsonriverlee@hudsonriverlee3 жыл бұрын

    • thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thanks Dusty

    @williamford7966@williamford7966 Жыл бұрын

  • Yeah I like it, nice a simple but man it looks really good. I'm going to use this sometime. Very nice.

    @btsmanman@btsmanman3 жыл бұрын

    • Glad you like it!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Wow that joinery made me sub!

    @arvismac@arvismac3 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Seems like with a little modification it would make a good portable knock down bench of some kind for the job site.

    @anthonyromano8565@anthonyromano85653 жыл бұрын

  • I wish I saw this before I did my last castle joint attempt. Broke the ends off because it was too tight.

    @Celticty@Celticty3 жыл бұрын

  • yay I liked this a lot .... now off to watch you other videos :)

    @David_11111@David_111113 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Muy buen trabajo mi amigo ánimo 👍

    @joseontiveros5322@joseontiveros5322 Жыл бұрын

  • Once again, thank you for reminding me to use my oscillating tool! Option 4: Use a Dado Stack on the table saw... thanks for the video!

    @guyh.4553@guyh.45533 жыл бұрын

    • 👍👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

    • In Europe, dado stacks are almost impossible to use.

      @tuomollo@tuomollo3 жыл бұрын

  • Enjoyed the video, thanks!

    @craigb.4624@craigb.46243 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Looks awesome!!

    @ephraim.1964@ephraim.19643 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Once you had them all lined up I thought you would have clamped them together and cut them all at once. Nice joints!👍👍

    @briceman7377@briceman73773 жыл бұрын

    • Thanks 👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Wow!! I think I can do that! Thank you sir!!!

    @ronswoodshack3855@ronswoodshack38553 жыл бұрын

    • 😁😁👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Clever! Thanks for sharing, I'm going to try it.

    @jerryprovencher2047@jerryprovencher20473 жыл бұрын

    • Thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • wow..a kind of video that help me a lot. thank you sir.

    @enricomagat4938@enricomagat49383 жыл бұрын

    • I’m glad to hear it!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Beautiful sliding saw

    @JonDunnmusician@JonDunnmusician3 жыл бұрын

    • Yes I love it!

      @dustylumberco@dustylumberco3 жыл бұрын

    • I just subscribed and enjoy your joinery talents! I looked into some of the sliding saws they usually start around 5k- there is Japanese woodworker who I like a lot who uses one: Ishitani- remarkable check him out

      @JonDunnmusician@JonDunnmusician3 жыл бұрын

    • @@JonDunnmusician thanks I will 👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • Nice comments on the final fit up. Thanks

    @williamfry6087@williamfry60873 жыл бұрын

    • thank you!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Very smart. Looks like 3D Bridle joint. Looks strong. Thanks for sharing 🍻

    @tonyalways7174@tonyalways71743 жыл бұрын

  • Interesting joint. You might mention the application of certain joints- ferinstance, this joint is an option if you want to use big, blocky legs.

    @boatdetective@boatdetective3 жыл бұрын

  • Works Great !

    @kassidyjones176@kassidyjones176 Жыл бұрын

  • Hey you did a great job breaking down your work for us. I would have to build a table saw sled to do this the way you did it. You've got a table saw sled build video?

    @Brosephyung1@Brosephyung13 жыл бұрын

    • Thank you! I don’t have a sled build video sorry

      @dustylumberco@dustylumberco3 жыл бұрын

  • Vintage Radial Arm Saw ( delta or dewalt pre 1960) with dado would be great addition for your shop. No blind ploughing like you have with table saw

    @maxfedor1@maxfedor13 жыл бұрын

    • Yes I do plan on getting one one of these days

      @dustylumberco@dustylumberco3 жыл бұрын

  • Very nice joints and build.

    @jorgefernandez-mv8hu@jorgefernandez-mv8hu3 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Thanks for the lecture amigo

    @Mojarra1@Mojarra13 жыл бұрын

    • 👍👍

      @dustylumberco@dustylumberco3 жыл бұрын

  • I love this video!

    @michaelowen8@michaelowen83 жыл бұрын

    • Thank you!!

      @dustylumberco@dustylumberco3 жыл бұрын

  • Good castle joint X 4!!

    @toddavis8603@toddavis86033 жыл бұрын

    • Thanks!

      @dustylumberco@dustylumberco3 жыл бұрын

  • It's beautiful bud

    @luckydadfla1@luckydadfla1 Жыл бұрын

  • Nearly 600k views for woodworking, and half of the comments are advise to HIM??? He even has all of his fingers still attached to him! Seems that it's impossible to create anything without somebody suggesting an improvement. Just waiting to see something original done by anyone of these down bringing critics. Mr. Dusty, you sir, are a king among men. In woodworking. P.S. love the prazi beam cutter, best attachment ever!

    @heikkiruokonen5185@heikkiruokonen51852 жыл бұрын

    • Thank you!! Yes truth is I can rarely post anything on social media and not get some haters commenting 🤷‍♂️ and most of them don’t post anything themselves so other can critique them

      @dustylumberco@dustylumberco2 жыл бұрын
KZhead