KZhead
Тәжірибелік нұсқаулар және стиль

Razor Sharp! Sharpen a Knife in 3 Minutes With This Method

Creation Holic
2024 ж. 29 Қаң.
2 375 545 Рет қаралды
Жүктеу

Hello everyone! You are watching video "Razor Sharp! Sharpen a Knife in 3 Minutes With This Method"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #tipsandtricks #recyclediy #diyprojects

Пікірлер

  • This looks like a good idea because there's at least half a dozen knives which I have to sharpen. And many thanks for using metric units. (I'm in India)

    @madddogg6904@madddogg6904Ай бұрын

    • Glad it helped!

      @creationholic101@creationholic101Ай бұрын

  • For the life of me, I couldnt figure out where this guy was going! And I am a cabinet maker for the last 54 years. For the love of Mike, it seems people today MUST make even what should be a simple task, over complicated to the enth degree! Take a deep breath, sit down, and quite simply....learn how to sharpen a knife the traditional way, and once learned, you will have it for life.

    @jeffreylombardo782@jeffreylombardo7822 ай бұрын

    • I soo agree with your sentiment. I just pissed away 8 minutes watching a video that proclaims to sharpen in 3 minutes. (DUH, ME!)...My grandfather was an old German butcher who taught me how to sharpen knives and every darned thing else. His knives were so sharp you could shave a gnats arse... These kinds of videos need to come with a SCHMUCK warning...I'm getting old too soon, smart too late...At best , this video was done with good intentions. (I hope)

      @johnduffy6546@johnduffy65462 ай бұрын

    • Agreed. But I do like the using of vinegar and baking soda to clean the rust and the polish. But I prefer sharpening my expensive Japanese knives with my trusty whet stones.

      @chautime5095@chautime50952 ай бұрын

    • @@johnduffy6546 So many KZhead videos are simply rabbit holes that waste your time. Fortunately for me I spent more time writing this reply than watching the video. I have learned to use the fast forward slider and actually try to avoid those tempting images they suck you in with (I failed and clicked on this one). Anytime you see one of those cryptic weird images that just don't make sense, you can bet the actual video is not going to match up with what you thought you were clicking on. The vast majority of what I see on the right side on my monitor right now is BS clickbait. This place can be a huge time suck from your life.

      @SimplyRedVirginia@SimplyRedVirginia2 ай бұрын

    • Meh, why do simple if complicated is an option.

      @boblolo3977@boblolo39772 ай бұрын

    • LOL! Yes, but this got over half a million views in one month. Content that attracts views pays!

      @AwosAtis@AwosAtis2 ай бұрын

  • Excelente idea por su simplicidad, A partir de ella uno puede completarla a su gusto Pero la idea base Genial mis felicitaciones

    @namberguan5746@namberguan5746Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Brilhante ideia. Obrigado pela partilha.

    @lfvenancio@lfvenancio2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Système ingénieux. J'ai attendu jusqu'à la fin de la vidéo pour mettre un pouce bleu. Bonne continuation à vous.

    @quentinlhomme3873@quentinlhomme38732 ай бұрын

    • Thank you for watching

      @creationholic101@creationholic101Ай бұрын

  • the general principle of this device is good. getting the sharpening angle accurate (and consistent) is crucial.

    @raymondo162@raymondo1622 ай бұрын

  • 自製的定角磨刀器與磨刀石，很有創意。👍

    @user-br2vf7fs7f@user-br2vf7fs7f3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • Thank You for sharing

    @scottmckinney1830@scottmckinney1830Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • YOU ARE A ABSOLUTE GENIUS ! STELLAR PRODUCTIONS, EVERY-ONE-OF -THEM !!!! THANK YOU 😎😎😎😎😎🎯🎯🎯🎯🎯🎯🎯🎯🎯🎯

    @JACK-wh6jl@JACK-wh6jl3 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1013 ай бұрын

    • @@creationholic101 as a alternative prep method if u put it in some acid instead of vinegar and finish rusting process u can boil it in water and blacken blade and it wont rust again

      @hamasmillitant1@hamasmillitant12 ай бұрын

    • @@hamasmillitant1 vinegar IS acid (acetic acid).

      @davidbroadfoot1864@davidbroadfoot18642 ай бұрын

  • Türkiye den selamlar çözümleriniz pratik ve harika zevkle izliyorum

    @maboreski@maboreski2 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1012 ай бұрын

    • Kkkkkkkkk pratica ? kkkkkkkk

      @flavioking4167@flavioking416726 күн бұрын

  • Hola soy de Argentina. Me encantó el video, buenísimo 😊👍!!!! Le pediría a mi sobrino que me armara el aparatito y tendría todos los cuchillos afilados. Muy buen filo!!! Muchas gracias por compartir esta práctica idea 💡muchas gracias por el video 😂❤

    @lilianalopezallen7724@lilianalopezallen7724Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

    • No te das cuenta que el vídeo está editado?? El vuelvo ya tenía filo o lo afiló con otra cosa eso por si solo no te da ese filo..... Me extraña que habiendo trabajado tanto tiempo con hijas afiladas creas en esto🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

      @victorhugoperezgascon4686@victorhugoperezgascon468626 күн бұрын

  • I bought this long ago and its a Lansky knife sharpener kit - it makes knives razor sharp too! Great way to make your own! good job

    @Krispy1011@Krispy101110 күн бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Күн бұрын

  • After sharpening the knife would have had a large burr. It was obviously removed before the sharpness demo. As it's an important part of the process, the burr removal should have been show.

    @martinvickers2348@martinvickers23482 ай бұрын

    • Probably two different knives 😂😂😂

      @mikeweiser2210@mikeweiser221018 күн бұрын

  • What about the folded sandpaper on the thumbnail? Show us how you sharpen with it. Also the knife was sharpened on one side,why? Isn't there a burr on the opposite side when you sharpen the blade?

    @claytonsimplot9554@claytonsimplot9554Ай бұрын

    • The knife was sharpened on one side because it uses a chisel grind. Personally I don't get the appeal, but most of my knives are western style knives. Chisel grinds are very popular among Japanese kitchen knives and Japanese utility knives. As for the burr on the opposite side. Yes. You do get a burr on the opposite side, but you would normally remove that by flattening the back side and/or a by stropping. Though depending on how much metal was removed it might not have been an issue the first time the knife was sharpened.

      @jkirschy@jkirschyАй бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Well done.. Great idea thanks

    @kenwhite5248@kenwhite5248Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Fantastic idea 100% will try it and let you know

    @donmcintyre5837@donmcintyre58372 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic101Ай бұрын

  • This is for those with zero skill in knife sharpening... there are similar devices available commercially, but I still prefer to sharpen my knives manually on different grades of stone under running water to a mirror finish and razor-sharp edge... it takes time and patience, but the satisfaction is unparalleled.

    @55gryphyn@55gryphyn2 ай бұрын

    • Thank you for sharing your feedback. Have a good day!

      @creationholic101@creationholic101Ай бұрын

    • Good for you. You do your thing other's will do theirs!

      @kenbar4761@kenbar4761Ай бұрын

  • A homemade Lansky...I've been using my Lansky for over 30 years. Best sharpening system on the market.

    @khiggins61@khiggins61Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Πολύ καλό μπράβο παληκάριμου να μας δείξεις πως να τροχίσω τα τρυπάνια

    @user-vy4qg1oe9o@user-vy4qg1oe9o3 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1013 ай бұрын

  • I bought a Drill Doctor many years ago and was very pleased with its performance, but the plastic depth stop to set the flutes broke and when I tried to buy another the style had changed to two fingers in the flutes and were hard to set right. The one you just tested went back to the original method of setting the depth of the drill in the holder. I may have to buy another one soon. LOL

    @hansjansen7047@hansjansen7047Ай бұрын

  • What purpose does the baking soda serve? The vinegar will remove rust without it. Adding the baking soda only neutralizes the acid in the vinegar. The acid is what loosens the rust. Baking soda only slows the process.

    @papaw5405@papaw54053 ай бұрын

    • Came here for this comment. The baking soda makes the fizzy bubbles, but enhances the process in absolutely no way other than that.

      @oliviaalexanderchiango3979@oliviaalexanderchiango39792 ай бұрын

    • That mixture cleans very well

      @creationholic101@creationholic1012 ай бұрын

    • It makes an effective cleaning 'paste'. This paste adheres to the surface and aids the cleaning process.

      @rapido2962@rapido29622 ай бұрын

    • Baking soda and water make an effective paste for cleaning. Adding vinegar only weakens it. @@rapido2962

      @papaw5405@papaw54052 ай бұрын

    • Both vinegar and baking soda are good cleaners but mixing them weakens both.@@creationholic101

      @papaw5405@papaw54052 ай бұрын

  • Somente vinagre ou suco de limão primeiro, decapa toda a ferrugem, depois lava-se e neutraliza-se com algo alcalino, o bicarbonato de sódio.

    @fechaed@fechaed3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • ¡Excelente idea!.. ¡Aplausos..! Lo pondré en práctica... ¡Muchas gracias....!

    @antoniodragonetti8533@antoniodragonetti85332 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic101Ай бұрын

  • Μπραβο.... πολύ έξυπνο!!! Σε Ευχαριστω 👍

    @werewolf6085@werewolf60853 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1013 ай бұрын

  • Whenever I sharpen a knife, it never takes more than a minute, ok kitchen knives. This took a took a tad too long and I would really question why anyone would do this.

    @nickjanssens@nickjanssens3 ай бұрын

    • It would be very easy for those without experience like me

      @creationholic101@creationholic1012 ай бұрын

    • This system will make you enter another level of sharpening knives for sure. Do it on both sides of kitchen knives.

      @VitorRodrigues-mj4cq@VitorRodrigues-mj4cq2 ай бұрын

  • This took you 3 days bro

    @ThurgoodJenkinz@ThurgoodJenkinzАй бұрын

    • 😂

      @ronnynilsson3@ronnynilsson3Ай бұрын

    • 😅😅​@@ronnynilsson3

      @user-no7xf7bc7f@user-no7xf7bc7fАй бұрын

    • After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

      @creationholic101@creationholic101Ай бұрын

    • ​@@creationholic101no.

      @RedRain9717@RedRain971723 күн бұрын

    • 😂😂😂😂😂

      @user-od1kl3kz4y@user-od1kl3kz4y21 күн бұрын

  • Thanks for sharing, great idea

    @TipsDIY8989@TipsDIY8989Ай бұрын

    • Thanks for watching!

      @creationholic101@creationholic101Ай бұрын

  • سلام.واقعاکارت زیبابود.تشکرمیکنم..ایران شیراز🎉🎉🎉

    @user-tu6tz7bq6n@user-tu6tz7bq6n3 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1013 ай бұрын

  • More like 5 hours of work just to sharpen a knife. Easier way is turn on your stove fire up and heat the knife up for 3 minutes and file it down for 1 minute. Do both sides and then use the smooth sandpaper to buff it up. Easy peasy! 8:39

    @ogtripledicer@ogtripledicer2 ай бұрын

    • Yes and then potentially ruined the knifes temper

      @boinecastillo7455@boinecastillo74552 ай бұрын

    • I couldn't agree more.....!!!!!

      @apostolisstefanopoulos883@apostolisstefanopoulos8832 ай бұрын

    • The 5 hours work is just for the first time, next time it will take 5 minutes. Less than ur version.

      @birwatihorhe9033@birwatihorhe90332 ай бұрын

    • Terrible idea...since you ruined the heat treat your knife will dull faster from then on. Just learn how to sharpen with stones.

      @haggis357@haggis3572 ай бұрын

    • The time is making the knife holder. A one of project guarantee to sharpen at the correct angle. You can't guarantee to only stay on the edge on your method

      @donmcintyre5837@donmcintyre58372 ай бұрын

  • Muy útil. Excelente❤

    @juandanielcano8052@juandanielcano8052Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Great idea!

    @devamahadevan1390@devamahadevan13903 ай бұрын

    • Glad you think so!

      @creationholic101@creationholic1012 ай бұрын

  • cara asah pisau setajam silet. luar biasa .. mantab

    @tania7tv@tania7tv3 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1013 ай бұрын

  • This is genius!

    @pkfitnesshub@pkfitnesshub19 сағат бұрын

  • Exediste los tres minutos ! Pero está bien interesante, gracias.

    @user-nv9vx1ps6p@user-nv9vx1ps6p2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • HOLA SOY DE CHILE ...GENIAL IDEA....

    @samuelaranda9663@samuelaranda96632 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic101Ай бұрын

  • Genial, danke dir😁

    @erichk5283@erichk52834 күн бұрын

  • good idea, thanks

    @4563582@45635823 ай бұрын

    • You are welcome!

      @creationholic101@creationholic1013 ай бұрын

  • Terima kasih ilmunya.ya kk sukses selalu jgn lupa bahagia kk❤❤❤

    @user-iz2gw6tk6v@user-iz2gw6tk6vАй бұрын

    • Hello! I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic101Ай бұрын

  • Brilliant.

    @VitorRodrigues-mj4cq@VitorRodrigues-mj4cq2 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic101Ай бұрын

  • Crazy idea. Might just be crazy enough to work!

    @russmiller3745@russmiller3745Күн бұрын

  • great video thanks

    @grayintheuk8021@grayintheuk80213 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • I have something like that from lansky ,great video,greetz from eindhoven the netherlands

    @peerverbraak@peerverbraakАй бұрын

    • Thanks for watching!

      @creationholic101@creationholic101Ай бұрын

  • After a working life of 54 years during which I used a knife every day for minimum of 10 hours a day, I have used many ways of keeping them sharp, if I had the opportunity to have tried this method I would have . Retaining the sharpness of a blade is the premier skill of being able to work with one.

    @KD-ih1sn@KD-ih1sn2 ай бұрын

    • Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

      @creationholic101@creationholic1012 ай бұрын

  • These types of guided sharpening systems/machines are popular and readily available. You took the time to make your own which is cool. Don’t worry about the complaining old men. You did good and it’s better than trying on a stone without the skill and ruining your knife (until you get the skill). Good video.

    @iSharpen@iSharpenАй бұрын

    • Hello! I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic101Ай бұрын

  • Thanks for motivating me to buy a new knife 🔪

    @bdebnath240@bdebnath2402 ай бұрын

  • Also you could replace cable tensioner with another wood for a fixed angle and use a stone to sharpen on that angle.

    @rodrigog.c.6047@rodrigog.c.60472 ай бұрын

    • Hello! thanks for your recommendation. Wish you all the best!

      @creationholic101@creationholic1012 ай бұрын

  • Super ideea !Felicitari maistrului !

    @mateipetresergiu5795@mateipetresergiu57952 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • muito bom.....vou fazer

    @jaimegenegordon9092@jaimegenegordon909225 күн бұрын

    • I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic10123 күн бұрын

  • أنا أستمتع بمشاهدة بالفيديو من العراق

    @user-xo6sy5iw8j@user-xo6sy5iw8j2 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1012 ай бұрын

  • This is what i need 👍

    @nx9Art@nx9Art3 ай бұрын

    • Glad it helped!

      @creationholic101@creationholic1012 ай бұрын

  • Good idea , very simple and efective

    @jositom@jositom2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

    • Be, semplice non direi proprio....

      @gianmariozucconi3242@gianmariozucconi32422 ай бұрын

  • Hello. Klasse Video 👍👍👍 Thanks........Fim🚂👮🤚

    @fokusnikfim@fokusnikfim3 ай бұрын

    • Thank you very much!

      @creationholic101@creationholic1013 ай бұрын

  • daca nu ai aspirator pentru operatia de la min 1:55, metoda mai poate fi folosita cu succes ? am de ales intre sa merg sa cumpar un cutit sau un aspiroator , nu stiu ce sa fac .

    @tehnic1452@tehnic14522 ай бұрын

  • A very fine sharpening jigg! Thanks!

    @tjenahoj@tjenahoj2 ай бұрын

    • Thank you too!

      @creationholic101@creationholic1012 ай бұрын

  • Congratulacions desde Euzkadi.

    @joseantoniodelorenzoquinte2609@joseantoniodelorenzoquinte26092 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic101Ай бұрын

  • Not bad for a home made knives sharpener.

    @HighWorthyMan@HighWorthyMan3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • Fantástico!!!!

    @marcelodiniznassif9168@marcelodiniznassif91682 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1012 ай бұрын

  • thanks for the free idea

    @soplam9555@soplam955519 күн бұрын

    • Most welcome 😊

      @creationholic101@creationholic10118 күн бұрын

  • I watched your video from Paris, thank you

    @sylvainc3303@sylvainc33033 ай бұрын

    • Thanks for watching!

      @creationholic101@creationholic1012 ай бұрын

  • Cara.Muito bom vídeo excelente parabéns 😮

    @user-vq9hf3gq1c@user-vq9hf3gq1c2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • Bravo taglia veramente bene,complimenti

    @casubaldo@casubaldo2 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic101Ай бұрын

  • I was waiting for you to get back to the knife 👍

    @stevenlengyel9701@stevenlengyel97012 ай бұрын

  • Hi Thanks for video What was the green body you rubbed?

    @AlirezaMoeini@AlirezaMoeini2 ай бұрын

    • Polierpaste zum Entgraten

      @uwemaurer2027@uwemaurer20272 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • Great Idea !! But why did you use a welding rod for the guide, and not just a round steel rod or pipe? And why the turnbuckle? Why not just thread the eye bolt directly into the wood base?

    @jctreese@jctreeseАй бұрын

    • I use soldering iron because it is available in my house

      @creationholic101@creationholic101Ай бұрын

  • Este ângulo é muito acentuado. Deveria acompanhar a inclinação da lâmina...

    @paulofernandes9126@paulofernandes9126Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Estupenda orientación , Morelia Mich.

    @CarlosArellano-kz2le@CarlosArellano-kz2le12 күн бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Күн бұрын

  • Gracias por compartir tan importante herramienta lo pondre en práctica un abrazo desde Colombia

    @lorenzoburbano2890@lorenzoburbano28902 ай бұрын

    • I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

      @creationholic101@creationholic1012 ай бұрын

  • Verry nice! Netherlands.

    @klippertijdgeest6000@klippertijdgeest60002 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic101Ай бұрын

  • My grandfather was a butcher and he left me some of his knives but I've never seen one with only one edge. What is it used for? Also if you treated the blade with vinegar and baking soda another time would it get rid of more of the staining? I never saw that trick before.

    @mrhot6shot@mrhot6shot2 ай бұрын

    • Normally, Japanese knives usually have 1 blade. To remove more, you should soak them longer

      @creationholic101@creationholic1012 ай бұрын

    • Is that sarcasm?

      @kenbar4761@kenbar4761Ай бұрын

  • Exellant❤

    @cezmicikatay7740@cezmicikatay7740Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • An ingenious method that I learnt today. Thanks for sharing this video.

    @krishs718@krishs7182 ай бұрын

    • Glad it was helpful!

      @creationholic101@creationholic1012 ай бұрын

  • que buena idea

    @anibalachondo876@anibalachondo8762 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • ..pro ukázku ostrého nože jsi měl ukázat jak krájí měkkou potravinu - jako například maso...pak by se ukázalo jestli je nůž ostrý ☝️😊

    @martinbuchar5923@martinbuchar5923Ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic101Ай бұрын

  • Great video. Going to make one. I have a question. Shouldn't you flip the knife over and sharpen that side too?

    @bobwild4773@bobwild4773Ай бұрын

    • That knife only has one blade, if your knife has two blades, turn it over to sharpen.

      @creationholic101@creationholic101Ай бұрын

  • Hello, if vinegar is mixed with soda bicarbonate , one is neutralizing the other.In what way does it help in cleaning the metal from the rust ?

    @georgiosdretakis8617@georgiosdretakis8617Ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic101Ай бұрын

  • Siempre.se.pueden.aprender.cosas.que.te.sirven.gracias.por.su.idea😂❤

    @carloscontreras-yo2nv@carloscontreras-yo2nv2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Great idea! Buying such a sharpener is very expensive plus the satisfaction of making something very useful 😊

    @andrevandenheever6740@andrevandenheever67402 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic101Ай бұрын

  • So, you made a Lansky kit?

    @armyfazer1410@armyfazer14102 ай бұрын

  • Toll und was ist mit dem Grad auf der 2. Seite ? Beim schärfen zieht man abwechseln beide Seiten ab , der dabei entstehende Grad hebt sich dann als feiner Metallspan ab . Alles andere ist Pfusch .

    @andreasreiffinger7964@andreasreiffinger79642 ай бұрын

    • Fully agree

      @jog3676@jog36762 ай бұрын

    • This knife only has 1 blade

      @creationholic101@creationholic1012 ай бұрын

    • ​@@creationholic101 Die meisten Messer haben nur eine Klinge ! Hier geht es um die Schneidfase ! Auch wenn ein Messer nur eine Fase hat muß man die andere Seite abziehen , sonst verhindert der Grat das das Messer gut schneidet . Dabei legt man das Messer mit der glatten Seite auf einen feinen Abziehstein und poliert die Spiegelfläche !

      @andreasreiffinger7964@andreasreiffinger79642 ай бұрын

  • Good Good Good 👍👌👏

    @user-ju3vs6eg7b@user-ju3vs6eg7b3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • dobre jestem z Polski Pozdrawiam

    @jerzymach5211@jerzymach52112 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Zu kompliziert!!!!!!!!

    @peterehrbar611@peterehrbar6112 ай бұрын

  • Genius. In the time it took me to watch someone to make a home made Lansky. I could have went down to my shop and sharpened many knives. A knockoff Lansky is $22 on ebay my time is worth something.

    @markthegunplumber8376@markthegunplumber8376Ай бұрын

  • Genial.

    @DM-ol6bv@DM-ol6bv2 ай бұрын

    • Thank you for watching

      @creationholic101@creationholic1012 ай бұрын

  • You made a Lansky 3-stone system... look it up

    @JuniorFarquar@JuniorFarquar2 ай бұрын

  • ممكن تستخدم لشحذ مقص الحلاقة

    @HASAN-jy7ps@HASAN-jy7ps3 ай бұрын

    • yes !

      @creationholic101@creationholic1013 ай бұрын

  • Goiânia - Goiás - Brasil

    @josecarlosgomesmora6397@josecarlosgomesmora63973 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1013 ай бұрын

  • Tizayuca Hidalgo México

    @user-id6ql3zm9c@user-id6ql3zm9c3 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1013 ай бұрын

  • great video, thank you for sharing.

    @Inventor799@Inventor7992 ай бұрын

    • Thanks for watching!

      @creationholic101@creationholic1012 ай бұрын

  • Got to mind sharpening takes time to learn I can still mess up and I've done it loads

    @eddiebhoy6754@eddiebhoy67542 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • 밑에 놓여있는 도마는 나무조각을 Glue 를 사용하여 조립 붙혀져서 화학물질인 Glue 로 인해 칼질을 하게되면 음식에 섞여지게 되어 먹으면 인체에 해를 줄수가 있다

    @jeakim4152@jeakim41522 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1012 ай бұрын

  • Nice..👍🙏❤️🇮🇩

    @tdkreatif@tdkreatif3 ай бұрын

    • Thanks for visiting

      @creationholic101@creationholic1013 ай бұрын

  • Na Verdade Vc Processou a recuperação de uma faca e, Seu Método/Possibilidade de Afiação, Sugiro Q Reveja pois, Apresenta uma Complexidade de Preparação e, para os bisonhos, "possibilidade" de acidente...!! 🙄🤔👁️👁️👍

    @raimundonegrao2890@raimundonegrao28902 ай бұрын

  • دمت گرم ❤❤❤

    @hasanalirezai6085@hasanalirezai6085Ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic101Ай бұрын

  • Smart idea ; these devices do exist but they cost a fortune ! Just asking : Don’t you need to follow the angle of the bevel on these mono bevel knifes ? And ; isn’t the 240 grit a little harsh ?

    @olivvapor4873@olivvapor4873Ай бұрын

    • Knife sharpening angle is usually 18-22 degrees, you choose to suit your knife

      @creationholic101@creationholic101Ай бұрын

  • Respekt.

    @mirijanadidic3502@mirijanadidic35022 ай бұрын

    • Thank you for watching

      @creationholic101@creationholic1012 ай бұрын

  • سلام..راه اسانتر برای تیز کردن مته❤

    @Shapoorkarimi@Shapoorkarimi3 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1013 ай бұрын

  • Coole Idee 👍👍

    @user-se9yd1mv3f@user-se9yd1mv3f2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • Buenas noches, una pregunta algo salida del tema, que tipo de cuchillo es el que está afilando. Gracias

    @jacksontovar5801@jacksontovar580125 күн бұрын

    • Japanese deba knife

      @creationholic101@creationholic10123 күн бұрын

  • Next up: Building a luxury yacht from a billion pencils while wearing shackles and blindfold!

    @fly1327@fly1327Ай бұрын
KZhead