WORKING ON THE MASSEY FERGUSON 1525 | Welding Hedge Cutter Bracket & Oil Change
2024 ж. 8 Мам.
29 636 Рет қаралды
The Massey Ferguson 1525 requires its first oil change and the hedge cutter control bracket needs some welding work.
The Massey Ferguson 1525 requires its first oil change and the hedge cutter control bracket needs some welding work.
If there's a bustle in your hedgerow don't be alarmed now!!!
It's just a spring clean for the May Queen!
Please don’t ever stop making videos. I learn so much
it is so satisfying to watch the hedge cutter work
Well, what a pain accessing that oil filter was. Anyway, nice maintenance video with some fine welding/modification thrown in. Very cool!
Nice alteration, the cutter does a great job.
Love the channel man. When is the next episode on restoring the quad bike going to be
Very nice welding!
Nice little tractor and hedge cutter 👍👍
I love your channel sir. I sure do wish you could produce more content. Even a non restoration video like this is quite enjoyable to watch. more, more, MORE! :)
Nice tractor never seen a setup like that on a subcompact tractor. Great improvement!
That hedge trimmer is brilliant! I've never seen on like that before!
Very nice piece of equipment. You helped it with some key maintenance and made it more user friendly.
Nice job on the Massey!
you should go to your local Massey dealer and get a sample kit for the oil.they will send it off to be tested and lewt you now if something is wrong before a major brealdown
That Iseki filter looks like the common size for like 90% of Japanese Kei cars ☺ (65mm cup?) they really wedged that filter in there! For my two cars here in Japan I get the PIAA magnet filters - do you feel it is necessary to put a magnet filter on small tractors & cutters?
Nice job
Short and sweet, but no less enjoyable dude 👉👉👉. My day is always made by one of your vids 🙏🙏🙏. 😎
Thank you for the video 😊
Got so confused seeing this video twice in the "subbox". Dint even notice it was on both your channels.🤭
Good job mister well done
nice video! good work on that massey and the hedge :)
Awesome
Drinking coffee while watching then the oil starts peeing out sets off a different drain alarm.
Nice beads!
A friend of mine has something like that he uses to mow his hayfields with
Hi Daggerwin, I have the Iseki version of this and the Bomford MicroKlippa (same as the McConnell). I have a vid on my channel and you can see the bracket I made - it goes out far and is supported by an upright bolted to the floor.
Just recorded a video for you of the hedge cutter installation bracket - it’s over on my channel. Cheers, Charles.
Nice with new stuff for a change :-). Keep up the good videos!
Very tidy welding job with the bracket 👏
Daggerwin I do not see you wiping out signs with your own tractors. Nice tractor!
👍
I guess a treat is better than no meal at all. lol
9:08 Lubrication Dagwin, Lubrication!
Nice video Daggerwin 👍 But what about the 4X4 video ?
When is the next restoration going to be
Nice tractor
Those welds look better than the ones from the factory! Nicely done!
Does the swingtrim ever block?
That tractor is like new with only 75 hours. My tractor is up to 259.5 hours.
I have a 2003 Cub Cadet 1525
From the sound of the engine it's either a Kubota or yanmar inline 3or 4 cylinder engine
Should be a Iseki 25hp 3 cylinder diesel
what does daggerwin do for living just wondering since it looks like has a good a life.
Restore machinery
thank you mate@@Daggerwin
Waiting for somone to say there should been a 90 degrees support on the support bracket all these expert engineers 😂
Do you still have the other massey
Be nice if that hedge cutter was on fs be fun
When you rebuild engines how do you make new decals for it ❓
If you don't mind me asking how much did you pay for that it's awesome
Just noticed the massey is just a Iseki
What happend with the Restorer?
I think that roll bar belongs to a john deere 1025r
Wow, that is a mighty hedge cutter. Would save so much time doing my 10m high hedges. All I have is a Husqvarna hand-held hedge cutter and an 8m tall ladder, lol.
What happening with the old machines, are you doing new videos? Im missing your restoring and reparations on old Lawnmowers
my only question is why not just bend the plate a bit instead of cut and weld extra ?
was this video meant to uploaded to this channel aswell as the daggerwin channel?
Yes
@@MachineryRestorer okay fair enough, was just being nosey
what was the engine oil filter part number cant seem to find any numbers on my filter
🤗🙏👍🇻🇪
0:12 I SEE YOUR FACE🤩🤩🤩🤩🥰🥰🥰🥰
sounds like the engine is knocking is it me?
You,😮
i did my david brown today. I couldn't think of anything worse than a machine with poor access.
why are second hand compact tractors so expensive new kubota cost 13,000 eur, dont see them second hand only the 30 year old which cost almost price as new one heres a option but difficult to buy at this moment a belarus 132h articulated tractor cost 6000 eur with vat together good price one problem all power take off equipment only belarus
Punctuation: learn it. (what an un-readable mess)
sorry i didnt go to upper class school plus i forgotten how to spell i dont live in uk@@johncoops6897
you need to give the engine a few more rpms.the hydraulics need more flow
Weld in a straight line lol I'm guessing you watched some fool on KZhead on how to weld 😂😂
There's always one, and you're it
@@UPTHETOWN if you do a bad job wouldn't you want someone to tell you how to do properly
A chic mini tractor for a small private farm!👍👍👍 I don’t ask about the price, since it’s a new model and not everyone can afford it... especially if it’s exported overseas, and the scale of production of similar ones is not tens or hundreds of thousands of pieces, even per year. But I was very attracted to the device for trimming tall bushes and grass, which I will try to use in a similar homemade unit.... - I have to somehow get ahead of the Chinese in something!! P.S.: My best wishes from the “new bantustan” of the EU and the USA (-Latvia..).🤓