Not just like a Bending Machine / Straightening / Press
Buildplans in Millimeter: madebythemetalist.etsy.com/de...
Buildplans in Inch: madebythemetalist.etsy.com/de...
A simple idea has now become something special. I have already built a few bending machines so far. But most are always for either sheet metal or thick flat steel.
Sheet metal bender: • DIY Sheet Metal Bender...
Sheet metal roller: • How to build a DIY She...
Flat steel roller: • DIY Rollbender Roller ...
20ton Press brake: • DIY 20 TON Workshop Pr...
Buildplans to my projects:madebythemetalist.etsy.com
That's why I wanted to have a small bending machine with which I could quickly make repeatable bends using the adjustment screw. In addition, it is also perfect for straightening flat steel. The idea of using it as a press came to me while I was building it. So you can build all kinds of matrices for it and also have the chance to bend thicker material like 30x6mm flat steel at the end of the video
I'm super happy with the result and it fits perfectly into my small workshop.
Big thanks to xTool for this awesome laser. This will brings my work on a other level and I have so much ideas with this thing, stay tuned ;)
get your laser: www.xtool.com/products/xtool-...
Bacause so many people ask already, the Burrs on min 2:34 its from Pferd:de.pferd.com/en/tungsten-carb...
Friends and Sponsors from my Channel:
xTool Laser: xtool.com/
Pferd abrasives: de.pferd.com/en
Stepcraft CNC: shop.stepcraft-systems.com/Home
ESAB Welding and cutting esab.com
Kemper Welding Fume extractions: www.kemper.eu/en
Incredible work! And thank you so so much for no unnecessary music or commentary!!!
Thank you 😊
Exactly! Let me listen to what I like, while I watch the DIY bending machine come to life.
This guy is not only an artisan level craftsman but a talented engineer.
Thank you 😊
@@TheMetalistI’ve ran brakes for years, you could make a smaller bottom die for a tighter bend, or even put a smaller piece of angle iron in and your radius will be a lot tighter.
It's refreshing to see people still know how to work hand tools. And well! Nice tool 😘
Thank you 💪😁
I bought your welding table build plans and it was great step by step. I've been searching the web trying to find a good drill tap set. Can mention what taps you use and counter sink bits you use in your builds. Your fabrication builds are the BEST I've seen. Thanks for sharing your builds with the world 🌍🙌
I like your bender. Also a crafty guy, I appreciate the work of others. You do a lot with very little.
It is this moment where I am most thankful for my CNC milling machine 😂 Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.
Same, I'd have done a whole bunch of this on the laser at work while sipping a drink. I don't wanna work this hard haha.
BASIC tools?!?!? WTF? There nothing basic about those tools, you cannot even FIND those in a normal hardware store
@@mcamodellThose are not basic consumer tools but pro grade tools. I think @Factory400 ment hand tools.
@@lainethm "Amazing outcome with basic tools"
Awesome. I need exactly one of these. I've been following a long time. Im really glad to see how you've grown from building your own bench to where you are now. This is an awesome custom tool.
Beautiful. A real pleasure in watching you work. All the small details, chamfering the holes and edges. Neat tool for breaking the edge on your slots too. Great bender, great work. Thanks.
I like that you brazed your channel name into the table
Outstanding design! The versatility of this unit really shines through.
First off - AWESOME build!!! Secondly - DANG I am glad I own a mill 😀
Nicely done and well thought out, thanks for sharing. Charles
😊
Why did I watch this?! 😂 I now see more tools and bits I need to buy. My wife is NOT going to be pleased. Really nice work!! Thanks for taking the time to show us. I’ll see if I can put it in the mix for this Summer’s projects.
Awesome, thank you 😁
You've got some really cool toys, and good ideas.
Perfection. I am a flooring guy and I wasn’t able to take my eyes off the screen. Thank you so much for the excellent editing!
@Factory400 12 часов назад It is this moment where I am most thankful for my CNC milling machine Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.
Very clever, and well done!
Thank you 😊
GREETINGS FROM ARGENTINA! CONGRATULATIONS
Damn you! I love it. You have made me want something that I didn't know I needed.
Almost a sideways arbor press! Neat!
🎉🥳💪🏻👍🏻 wieder geil, das Video und das Ergebnis. Jetzt kann ich gut schlafen 😁
Vielen Dank 😊
When he turned it upright & used it as a press break........................I literally can even!!!! 🤯👌
😊
Show off :D - хаха Btw - nice work man. Good for you. You are a true craftsman. Respect !
Thank you 😊
Salut le BOOS . vous êtes super grave . merci pour le bendeur à mollets multiples. Big j'aime ! W
Don't be sure if i like more the simple design or the functionality. Great project 👍 Just to the right time on a sunday evening a good movie...this is what it takes 😆 I am excited what's up next 🙌
Thanks you 😊 nächsten zwei Projekte werden etwas einfacher😅
Einfach nur geil dir zuzusehen. Das ist ganz tolle Handwerkskunst und super um sich Inspirationen zu holen👌
Vielen Dank 😊
Dirk, there is no stopping you, my friend!!! 🫵r #☝️ Awesome Invention!!!👌 👏 👍
Thanks a lot Silver😊
Fantastic, you always do complicated things with basic tools and very well thought out construction !
Always enjoy watching your work!
Thank you 😊
Du machst wirklich klasse Werkzeug, klasse und pragmatisch
Vielen Dank 😊
Someone get this man a Bridgeport!! Bravo my friend. Great work!
What is a Bridgeport? I dunno if that's a tool or like a fancy drink?
@@heckyes A professional milling machine - knee mill
@@heckyesIt's an engineering tool, really. If you have a bridgeport and a lathe, you can build all kinds of machines like I do.
I love that third ✋. 👍😄
Oh Mann, einfach geil! Ich bin gerade an 2 Projekten von dir am Nachbauen und jetzt kommt das nächste Ding auf meine Wunschliste. Ich hab schlossern als Hobby angefangen und deine Pläne sind echt dankbar für Noobs wie mich ;) Ich lern echt viel dabei und es macht Spaß. Und vor allem wenn man es selber macht, merkt man erst wie viel Arbeit das ist. Auf jeden Fall, danke für deine tollen Projekte!! Du tust dir da echt was an.
Vielen Dank 😊 Ja ist ja auch mein Hobby 😁
Great tool, good job thanks for sharing.
Such a cool project, well done! 👏
Thank you 😁😉
Awesome bending tool, I fully plan to make one of these! Thanks for sharing
Love it - we made a small press for bending inside corners on letters - but it is hydraulic - this is a great project! I will use it as inspiration for the next build for sure!
Thank you 😊
Cool, das schreit eigentlich nach einem käuflichen Bausatz! 😊
You are the best my guy.
Thank you 😊
Very well put together.
That is so smooth! I like your designs cause they just work so many ways👌🏻 Metalist you are the beast😎!
Thank you 💪😊
Well done
Thank you 😊
Your skills are simply ridiculous. Well done sir.
Thank you
Your technique is spot on. Excellent craftsmanship 💯
Well done! Especial since you don’t use a milling machine to fabricate. One comment. Use a tapping fluid.
Thank you 😊 yes i missed it for a couple of sec 😅 but the bit is still good
Hello Dirk, once again great work, I'm thrilled! Best regards, Michael
@@michaelmetzner3981 vielen Dank...hab dich nicht vergessen 😉
The man has to be doing stuff infuriating on purpose. He literally just took a piece off the drop saw and then cut the miter with an angle grinder right after. Sweet Jesus
Also straight up welding and cutting that tube just to use as a fence...
That was awesome bro Way cool
Schade das nicht jeden Sonntag ein Video kommt mit geilen DIY Sachen. Wieder einmal eine geile Vorrrichtung die du da gebaut hast 👍🏻
Ja jede Woche das wäre schön vl klappt das irgendwann mal 😉
on my old job i had the hydraulic 40 ton version of this. So cool of a machine for custom fabrication work.
merci beau travail !!
Merci 😁
Amazing. As always. Great work
Thank you 😊
another brilliant design , an idea came to me when you upended the machine "vertically" this would work perfect for (dimple dies) i will be constructing one for myself in the future , thanks for sharing
Thank you 😊 Awesome send me some pics if it's ready 😁
great job
Brilliant design. Great video! 👍
Großartig Maestro 👌👍💪👏👏👏👏
Vielen Dank 😊
Wow... That's a lot of work for a 30 second slot. I hear Bridgeport calling your name!
Your an absolute wizard, very nice.
Не к чему придраться! Все выполненно четко и точно! Однозначно лайк и подписка 😊
Gefällt mir immer wieder sehr gut was du machst.
Vielen Dank 😊
BRILLIANT as always!!
Well done Brother!
Thank you 😊
Vraiment top ! bravo et merci ...
Coole Idee. 👍Spiele seit längerem mit dem Gedanken mir eine Zahnstangenpresse zu besorgen. Das scheint ne tolle Alternative zu sein!
Vielen Dank 😊 Zeichnungen will ich auf Dienstag fertig haben. Bin gerade noch dabei ein paar sachen zu verbessern 😁 Grüße
Allein die gleit-Führung mit Gewinden drin ist eine super-Idee. Da könnte man mit extrem wenig Aufwand eine Rollen-Biegemaschine draus bauen: 2 Rollen anstelle des "V-Amboss" und eine Rolle statt des beweglichen "Hammers" (keine Ahnung wie ich's ausdrücken soll). Dazu zusätzliche Gewinde in den Grundkörper in der Nähe des Hebels. Da könnte man dann eine Halterung mit Schraube als Press-Spindel befestigen um die bewegliche Rolle Richtung fester Rollen zu drücken.
Vielen Dank 😊 Ja das stimmt dachte mir auch schon sowas bloß die Idee mit dem gewinde die hatte ich noch nicht 😅 aber da kann man so viel verschiedene Matrizen bauen. Vl mach ich noch eine teil zwei für in dem ich mal alle Ideen verwirkliche 😅
Nice!
As usual, magnificent job 👏🏼🫡
Definitely interested in build plans when this hits etsy.
Thank you 😊 Plans are online
Nice tool! Unfortunately I cannot build one myself as I don't own a laser engraver!
😅😂👍
This is awesome
Thank you 😊
That mag drill is soo compact. Man the ones I've used were 3-4 times the size
Interesting project.
Thank you 😊
Excelente Fabricación de muy alto nivel
Merci 😁
Outstanding.
Thank you 😊
Pretty slick! Very useful too!
This is legit. Nice job, dude!
Beautiful work
Thank you 😊
Awesome work and good show of skills and thought :) - keep it up One day i hope i live somewhere were tools and materials aren't so expensive that I can do projects or have fun making stuff without the thought of the repercussions of not having food or a roof over my head (Life can be hard but doesn't mean not to dream)
What a brilliant video! thank you
Very impressive!
Incredible nicely done wow.
Great work as always Dirk... Just a thought you could put a crank handle and 2 fixed bearings to make a radius roller.. I know you have a dedicated Heavy duty one.
Thank you 😊 Yes not the first one who mentioned that
Beautiful love it
Hi everyone, the plans are online Millimeter: madebythemetalist.etsy.com/de/listing/1672317860/plans-for-a-universal-metal-bender-in Inch: madebythemetalist.etsy.com/de/listing/1672321156/plans-for-a-universal-metal-bender-in
Nicely done!
Thank you 😊
VERY NICE !!!! Love it.
Awesome and thank you!
very nice
Wow nice job!
Top Job, Sir 👌
Cool tool!
Nice tool great video.
Well Done!
Hello from France, Thank you for all yours video, you are creative and inspiring. What is the screw-tap brand you use with your hand drill ? It could be very interresting to show or to put in description all the tools and brand you use set a side yours sponsors. Thanks for your videos I reproduced some of your project
Thank you 😊 the tabs are from ruko. Yes i plan a shop tour 😅
Awesome tool. Thanks
This is awesome!!
Great Job Mister 🤠👌
Thank you 😊
Nice job. Thank you
Love your videos. Make some more,
install roller bearings on the tooling you used to make the hoop and a crank handle, and you could roll steel. awesome stuff sir.
You should make a depth set and lock for the handle and three roller wheels and a hand crank for the roller wheel on sliding mechanism For rod and flatstock rolling.
Thats a nice idea 😉😊
Megageil was Du da wieder gebaut hast ,super finde ich auch den Fräser oder die Rotationsfeile und den Anfasfräser ,wo gibt es das zu kaufen? Grüße Marko
Vielen Dank 😊 das gibt's alles von Pferd Grüße Dirk 👋
@@TheMetalist Super vielen Dank 👍😁