ABANA National Curriculum 1.13 - Monkey Tool
2023 ж. 13 Шіл.
844 Рет қаралды
Monkey Tool
Official ABANA Level 1 Curriculum. abana.org/education/national-...
1.13 - MONKEY TOOL [Gate latch, level II and Level III]
1.13.1 From 1-inch square stock (precursor to making a hammer - level 2).
1.13.2 For 5/16-inch tenon.
1.13.3 Tool to have vent/visual hole punched and drifted using tools from 1.10 & 1.11
1.13.4 Punching and drifting the eye is a pre-curser to making a leafing hammer.
1.0.13.5 The hole shall be centered in the bar and perpendicular to the center-line of
the parent bar
Filmed at Pioneer Farms in Austin TX:
www.pioneerfarms.org/
👍✌️
Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld On. Keep forge lit. Keep Making. God Bless.
Thanks, you too!
thanks for the share. Going to give a go at the same project here myself in the next few days only here is zub freezing yukon temps. Sounds like you need take a moment and take a deep breath!
Good luck with it. It was a fun project.
That is a very interesting anvil. Very skinny and I see that only one side of the horn is so greatly rounded. Farrier anvils are always interesting.
Yah it's a bit odd. 100ish year old Hay Budden.
@@WatersIronworks They are truly the tallest and longest of the anvil species, lol
..if at first you don't succeed, heat it up and give it some more whacks or make another. Well done Phillip! Quick as it gets below 90+ i'm firing up the forge. that may be October...
It is a crazy hot summer! I assume people might like to see what goes wrong as well as right. I find it encouraging to see that everyone else isn't making things perfect every time.