KZhead
Ғылым және технология

I made this carving knife

i made this
2024 ж. 5 Қаң.
386 834 Рет қаралды
Жүктеу

Some say that carving wood is a really satisfying activity. There's only one way to find out. First, I had to make an appropriate tool, though. It was a fun project!
I hope you enjoy the video!
Please subscribe if you like my stuff! If you would like to support my channel and watch all my videos without ads, check out my patreon page: / imadethischannel
Follow me on instagram: / i_made_this_official

Пікірлер

  • Thanks for watching! If you would like to support my channel and get add-free access to all my videos, check out my patreon page: www.patreon.com/imadethischannel

    @imadethischannel@imadethischannel3 ай бұрын

    • I found you on Reddit I will follow you :))

      @Im-building-stuff@Im-building-stuff3 ай бұрын

    • Nice! So reddit was good for something after all!

      @imadethischannel@imadethischannel3 ай бұрын

  • Nice job, I love that you are still using hand tools

    @Im-building-stuff@Im-building-stuff3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

    • In my humble opinion, I believe that true craftsman are a dying breed. Not saying that people who use power tools aren't craftsman, just saying that doing it by hand brings a certain essence and quality that tools just doesn't. Pride of ownership and craft are on the way out in our country. Sad but true...but I'm gonna keep on being old school as long as I can. Thanks for the video. You reminded me of why I do things how I do them. Much appreciated

      @iamthemanwho41@iamthemanwho412 ай бұрын

    • how does bro have a lathe but not a drill

      @user-vn4xu5wz6d@user-vn4xu5wz6dАй бұрын

  • Hand filing a hand file with a hand file 🔥

    @L1gibsOTB@L1gibsOTB3 ай бұрын

    • That‘s the way to do it!

      @imadethischannel@imadethischannel3 ай бұрын

  • Great result with simple tools . Keep up the good job

    @omarbelhedi821@omarbelhedi821Ай бұрын

    • Thanks, I’ll try!

      @imadethischannel@imadethischannelАй бұрын

  • Awesome That’s a perfect little blade that would be a great EDC KNIFE 👍

    @allanwagner4570@allanwagner45702 ай бұрын

  • Perfect! A lot of manual work, only a lathe as a machine. That's great.

    @kiwi9722@kiwi97222 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel2 ай бұрын

  • You do very nice work, mate! You should post more often!

    @TheSmallWorkshop@TheSmallWorkshop3 ай бұрын

    • Wow, thanks! It‘s an honour to hear that from you! I am planing to make more videos again in the future.

      @imadethischannel@imadethischannel3 ай бұрын

  • Awesome! Geronimo would be proud of you! 🏹

    @illecebris8709@illecebris87093 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • This is a simple video of a great work.. Love it..

    @maxwellkingkonj2923@maxwellkingkonj29233 ай бұрын

    • Thank you!

      @imadethischannel@imadethischannel3 ай бұрын

  • Great looking knife. Very well done!

    @dixonqwerty@dixonqwerty3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • I'll have to try that too when I get my hands on an old file. Nice work and keep going

    @matthiasjakub512@matthiasjakub512Ай бұрын

    • Thanks, and yes, get an old file!

      @imadethischannel@imadethischannelАй бұрын

    • Thanks for your answer. How long did you anneal the file to get it soft? is it then just cooled down to room temperature?

      @matthiasjakub512@matthiasjakub512Ай бұрын

    • @matthiasjakub512 I just heat it until it is red and let it cool in air. That usually works.

      @imadethischannel@imadethischannelАй бұрын

    • Thanks for the advice!

      @matthiasjakub512@matthiasjakub512Ай бұрын

  • Really beautiful work, dude! It looks amazing!!! 😃 Happy new year! And stay safe there with your family! 🖖😊

    @MCsCreations@MCsCreations3 ай бұрын

    • Thanks! Happy new year to you and your family as well!

      @imadethischannel@imadethischannel3 ай бұрын

  • Great knife. Thankyou for posting the video.

    @dereksmith2910@dereksmith29103 ай бұрын

    • Thanks for watching!

      @imadethischannel@imadethischannel3 ай бұрын

  • Beautiful little knife, ive got a few file tails hanging around my shop as well as tons of small cunks of steel, definitely going to be making myself a few carving knives soon

    @McGowanForge@McGowanForgeАй бұрын

    • Yes, do it!

      @imadethischannel@imadethischannelАй бұрын

  • This was really fun to watch.

    @Lover-girlASMR@Lover-girlASMR2 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel2 ай бұрын

  • I've had a quick peek at all your other videos. I would LOVE to see you make a scorp.

    @susanp.collins7834@susanp.collins78342 ай бұрын

    • Good idea. I’ll keep that in mind! Thanks for watching!

      @imadethischannel@imadethischannel2 ай бұрын

  • Great Job ... really impressive how you did it ...

    @fanfarius@fanfariusАй бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • LOVE the Mallet!

    @daveparker5569@daveparker55693 ай бұрын

    • Haha, yes. I borrowed that because I have previously broken handles with heavier ones…

      @imadethischannel@imadethischannel3 ай бұрын

    • @@imadethischannel you were fortunate to have a friend who would loan you such an instrument!

      @daveparker5569@daveparker55693 ай бұрын

    • Yes, totally.

      @imadethischannel@imadethischannel3 ай бұрын

  • beautiful street scapel .

    @ratroddiesels1981@ratroddiesels19812 ай бұрын

    • thank you for your comment ,i really enjoyed watching your skills making it.

      @ratroddiesels1981@ratroddiesels19812 ай бұрын

  • Когда я увидел токарный станок, то очень расстроился, что не смогу сделать этот замечательный ножичек. Но потом я увидел коловорот и обрадовался. Ведь его можно использовать как токарный станок. Вот только женюсь. Чтобы жена крутила его, пока буду точить ручку. 😃

    @nedoZdetec@nedoZdetec3 ай бұрын

  • Nicely done.

    @plakor6133@plakor61333 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • Thank you for your video I learn haw to make by my hand

    @mohamedHassan-yy7rj@mohamedHassan-yy7rj19 күн бұрын

    • You’re welcome, thanks for watching!

      @imadethischannel@imadethischannel19 күн бұрын

  • A nice small little cutter! Ash is a (very) hard wood, so I can’t believe that plug was merely cut into two with a kitchen knife. It would be impossible even with sawing movements, no matter how sharp the knife was and what magic steel , it was made from. You need a saw to do that.

    @ihorpavlovych5236@ihorpavlovych52363 ай бұрын

    • Haha, well spotted! 😀

      @imadethischannel@imadethischannel3 ай бұрын

  • thats a very nice knife thanks for posting

    @keiththompson2337@keiththompson23373 ай бұрын

    • Thanks for watching!

      @imadethischannel@imadethischannel3 ай бұрын

  • Great work. Someday I'll try something like that. ❤

    @ms-ht1cj@ms-ht1cj2 ай бұрын

    • Thanks! And yes, do it!

      @imadethischannel@imadethischannel2 ай бұрын

    • Я себе також тішу подібними ілюзіями))

      @black-white379@black-white379Ай бұрын

  • very good for wood ✌️

    @AXE-WoodCarving@AXE-WoodCarving3 ай бұрын

  • Сразу видна старая слесарная школа мастеров. Нож будет очень удобен для резьбы по дереву. Но, на мой взгляд круглая рукоятка - это недостаток, нож будет скатываться со стола и прокручиваться в руке. В остальном всë супер.

    @user-cz6rr5ny3r@user-cz6rr5ny3r2 ай бұрын

  • Better than Maigret thoughroly enjoyed your craftsmanship best wishes Rick. 🇹🇹🚣‍♂️🇯🇴🇺🇦💕

    @captaincolumbus5946@captaincolumbus59462 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel2 ай бұрын

  • I need to mention that thinning on your Atoma flattening stone will make it wear out quick. I used to use my atoma for lots thinning for about 6 months and now its slower than an 800 grit diamond stone. Only use it for flattening, that's what it's made to do. For lots of grinding and thinning I tend to use either sandpaper (I usually wet my atoma and stick the sand paper on top, it's perfectly flat and has a great grip) or I use the "Sharpening Supplies" Grinder stone. It's an 80 grit water stone and works FAST. You will need some loose silicon carbide grit however, such as 60/90 tumbling grit. Other than that there is "THE BEAST" (this is it's real name) 50 grit diamond stone that's pretty cheap. Also to make annealing easier (and softer) its nice to have a little pot full of burnt ash. When work is hot, stick it deep into the ash. It cools down very slowly and it's very soft afterwards, this is what most blacksmiths do.

    @williamw7134@williamw71343 ай бұрын

    • Ok, thanks! Good to know!

      @imadethischannel@imadethischannel3 ай бұрын

  • 😂 like the ending

    @lumotroph@lumotroph3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • Beautiful project 🍺

    @YooProjects@YooProjects3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • Beautiful😊

    @victorrodriguez5590@victorrodriguez5590Ай бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • What I liked was the "mini lathe" Do you have a video of how do you built it?

    @goblin900dunsanylord@goblin900dunsanylord3 ай бұрын

    • Hey, I didn‘t actually build that one. These were sold by a company named Wolfcraft. I‘m not sure if they are still sold.

      @imadethischannel@imadethischannel3 ай бұрын

  • Nice video, very entertaining.

    @ElHaluko@ElHaluko3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • Браво! Вот зто настоящая ручная работа!

    @user-wg6bm3sv2r@user-wg6bm3sv2r3 ай бұрын

  • I had a knife like this, a long time ago it was called belly cuter.

    @lady_fantasy@lady_fantasyАй бұрын

    • Oh, what‘s your line of work?

      @imadethischannel@imadethischannelАй бұрын

    • @@imadethischannel Relax. I’m not a maniac. I need this knife for cutting bellies of fish, before cooking.

      @lady_fantasy@lady_fantasyАй бұрын

  • Schön gemacht. Auch die kleinen Details, Windows Fehlermeldung und Gameboy Sound ;) Ich schneide mittlerweile auch Stahlprofile nur noch mit dem Küchenmesser. Es gibt einfach nichts besseres ;) Gruß, Sven

    @SvensWerkstube@SvensWerkstube3 ай бұрын

    • Danke Sven! Ich freue mich immer über Lob vom echten Fachmann!

      @imadethischannel@imadethischannel3 ай бұрын

  • Carefull! Don´t burn the sausage!

    @84com83@84com83Ай бұрын

    • Haha, yes. I overdid it a bit:)

      @imadethischannel@imadethischannelАй бұрын

  • Great looking knife 😉😉

    @MASI_forging@MASI_forging3 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • I love it 5hank you

    @victorrodriguez5590@victorrodriguez5590Ай бұрын

    • Thanks for watching!

      @imadethischannel@imadethischannelАй бұрын

  • prachtig mesje van uit de oude vijl, m ijn duimpje omhoog.

    @renevandort7015@renevandort7015Ай бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • Tutorial on how to sharp knives please 🙏

    @jamzy007@jamzy00724 күн бұрын

    • I don‘t have immediate plans, but I might make one!

      @imadethischannel@imadethischannel23 күн бұрын

  • bro used a file to file a file

    @egb33665@egb3366522 күн бұрын

  • You blow torch a piece of metal then casually just pick it up like it's nothing

    @FoxDog1080@FoxDog1080Ай бұрын

    • Allowed time to cool

      @Muphetballs@MuphetballsАй бұрын

    • There is some minor editing in these videos.

      @imadethischannel@imadethischannelАй бұрын

    • Thats something us in the industry call: Editing

      @meganek0597@meganek059727 күн бұрын

  • Very nice

    @jackjacobsonelev9121@jackjacobsonelev91213 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • Very good.

    @XaLoiVlog@XaLoiVlogАй бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • Great Job. Thanks for showing us. Can you talk me where I can buy a lathe like yours. Thanks again.

    @pericodelospalotes9768@pericodelospalotes97683 ай бұрын

    • Hey, thanks for watching! The lathe was made by a company called Wolfcraft. I‘m not sure if it is still sold. I can also not really recommend it. It‘s not rigid enough and it feels kind of unsafe to use.

      @imadethischannel@imadethischannel3 ай бұрын

    • ​@@imadethischannel I would remove the tool rest when you're not using it,no chance then of getting fingers caught in the gap

      @adammckay296@adammckay2962 ай бұрын

  • Awesome, very beautiful video!! How many time did you spend to make it?

    @francesconapoli3999@francesconapoli39993 ай бұрын

    • Thanks! It actually takes quite long because of all the filming. Just the knife could probably be done in an afternoon.

      @imadethischannel@imadethischannel3 ай бұрын

  • 👍👍👍ручная работа 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

    @user-mb3xf9qd4f@user-mb3xf9qd4f2 ай бұрын

  • very nice job. but i have a question . is the inside of the file carbon steel. because i think they only add loose carbon on the outside of the file and harden that. or am i wrong and is it all carbon steel. i mean does it hold it sharpness for a long time?

    @nielsvlietland5406@nielsvlietland54062 ай бұрын

    • Thanks! This one was all carbon steel. But I have had files that were only case hardened. It took me a while to understand why I could not harden them. Now I try to harden a piece of a file before I use it for a project.

      @imadethischannel@imadethischannel2 ай бұрын

    • @@imadethischannel ok thanks for the answer i was just wondering. keep upthe nice videos

      @nielsvlietland5406@nielsvlietland54062 ай бұрын

  • Отличный нож получился.

    @Vikontus@Vikontus3 ай бұрын

  • Step one grab your file and start filing your file with the file until it gets filed enough until it looks less like a file. Lol

    @konstantinevetrov7@konstantinevetrov7Ай бұрын

    • Exactly!

      @imadethischannel@imadethischannelАй бұрын

  • i love this videos (your)

    @klosklouz@klosklouz2 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel2 ай бұрын

  • Man, what saw blades do you use? How long does it typically take you to saw through stuff like files and threaded rods?

    @B_COOPER@B_COOPER15 күн бұрын

    • These are standard saw blades and the time depends very much on the thickness of the material. Treaded rods and files are pretty quick, though. Check out my router plane video if you want to see some serious hand sawing workout ;)

      @imadethischannel@imadethischannel15 күн бұрын

    • @@imadethischannel thanks for the reply man! I’ve make that my next watch. I love the atmosphere (or vibe if you are like those kool kidz) that your videos bring. It reminds me of the opening credits from the movie Napoleon Dynamite, minus the singing haha.

      @B_COOPER@B_COOPER15 күн бұрын

    • @B_COOPER hey, thanks! I have to rewatch that.

      @imadethischannel@imadethischannel14 күн бұрын

  • Nice ❤❤❤❤

    @VirajJoshiVlogs@VirajJoshiVlogsАй бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • Hella dope knife, @imadethischannel!

    @geraldstamour1312@geraldstamour13123 ай бұрын

    • Thanks!

      @imadethischannel@imadethischannel3 ай бұрын

  • I dont get it, how is it he able to cut a file with a hack saw? Is it normalized/anealed?

    @romualdaskuzborskis@romualdaskuzborskis3 ай бұрын

    • Nvm, I appearently skipped the few secconds with torch..

      @romualdaskuzborskis@romualdaskuzborskis3 ай бұрын

  • You need to put the hotdog on point insert long way. That’s the way to not break the hotdog and lose it to the fire:) Great job on the knife, good to see people actually using mostly hand tools to make something looking awesome. Keep up the good work!

    @asbjrnyoung-groener1646@asbjrnyoung-groener1646Ай бұрын

    • Thanks! And I‘ll work on my hotdog technique!

      @imadethischannel@imadethischannelАй бұрын

  • Bravo

    @andygibbs8893@andygibbs8893Ай бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • Is that "lathe" home made or can you buy that?

    @daniellangdon7905@daniellangdon7905Ай бұрын

    • That is something that was once sold by a company named Wolfcraft. I am not sure if they still make it, though.

      @imadethischannel@imadethischannelАй бұрын

  • I would love to have that carving knife … how much if your willing to sell or maybe make me a custom one ?

    @shontaperez5168@shontaperez51683 ай бұрын

    • Hi, thanks for your interest in my knife! At the moment, all the projects I do are one-offs and I don’t sell anything. But this may change in the future. You can write me an email (see channel info) or leave your contact in my patreon so that you can get notified if that should happen.

      @imadethischannel@imadethischannel3 ай бұрын

  • По-русски сказать: - "Ни Богу свечка, ни чёрту кочерга". Мартышкин труд, иначе говоря.

    @Anatoliy1504@Anatoliy15042 ай бұрын

  • Next time burn the tang into the handle - you will get a better fit...

    @jeffreyhowll1392@jeffreyhowll13923 күн бұрын

    • Yes, true. I sometimes do that as well.

      @imadethischannel@imadethischannel2 күн бұрын

  • Bagus ,ini pasti kuat dan tajam ,,,salam kenal ya om 👍❤❤

    @rohmatbubut-um4ug@rohmatbubut-um4ugАй бұрын

  • Buenos muchachos.

    @titovanssoc1401@titovanssoc14013 ай бұрын

  • Best

    @Simbajatisawmill@SimbajatisawmillАй бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • 😊😊😊

    @eroltaskin@eroltaskin3 ай бұрын

  • Так вот, оказывается , для чего он !!! Чтобы сосиску с палочки снимать !!!😅

    @user-kr8zd3dt2p@user-kr8zd3dt2p3 ай бұрын

    • Из напильника нож только для этого и годится🤣🤣

      @user-rm4zl3yf7w@user-rm4zl3yf7w2 ай бұрын

  • mmm, sausage...

    @LockBits-ts6eo@LockBits-ts6eo3 ай бұрын

  • Like for hand tools!!!

    @StanQA@StanQAАй бұрын

    • Thanks!

      @imadethischannel@imadethischannelАй бұрын

  • Very funny

    @etcher6841@etcher68413 ай бұрын

  • i can do all the same with a cheapest kitchen knife

    @zhuk462@zhuk4623 күн бұрын

    • Sharpening a stick and burning a sausage?

      @imadethischannel@imadethischannel3 күн бұрын

  • That is not a “piece of ash” ! Is wood 😂

    @tobedetermined4180@tobedetermined4180Ай бұрын

    • Ash is a type of wood. There's an ash tree, ash forests and and ash wood axe handles

      @Muphetballs@MuphetballsАй бұрын

    • Haha, thanks for stepping in 😀

      @imadethischannel@imadethischannelАй бұрын

    • @@imadethischannel Ash is my favorite ❤️

      @Muphetballs@MuphetballsАй бұрын

    • Mine too. Especially for handles. I always try to keep my ash tray well stocked.

      @imadethischannel@imadethischannelАй бұрын

  • ,👍

    @user-wr5fv3vw9f@user-wr5fv3vw9f2 ай бұрын

  • Mega

    @holzhandwerklifehacksdiyto1537@holzhandwerklifehacksdiyto15373 ай бұрын

    • Danke!

      @imadethischannel@imadethischannel3 ай бұрын

  • А зачем отпускать, если можно болгаркой отрезать.

    @Mihail_Duymin@Mihail_Duymin3 ай бұрын

  • Bruhh that carving knife is so sharp that you easily cut wood

    @ChristopherOrena-vb5dd@ChristopherOrena-vb5dd2 ай бұрын

    • Yes, maybe I went too far?

      @imadethischannel@imadethischannel2 ай бұрын

    • Me when the carving knife carves

      @anishshirodkar484@anishshirodkar484Ай бұрын

    • I mean, call me crazy, but I'm more impressed they got the ferrule on while the lathe was spinning! Every time I try that, I lose a finger!

      @Thoron_of_Neto@Thoron_of_NetoАй бұрын

    • @Thoron_of_Neto yes, it can be tricky

      @imadethischannel@imadethischannelАй бұрын

    • Were you high when you wrote this?

      @evodamus139@evodamus13922 күн бұрын

  • На себя никто не режет, можно порезаться!

    @user-kk4cz3pz4l@user-kk4cz3pz4l2 ай бұрын

  • Из напильника хорошего ножа не получится.

    @astakhiy_v@astakhiy_v29 күн бұрын

    • How come?

      @imadethischannel@imadethischannel29 күн бұрын

    • @@imadethischannel у этого ножа отличный вид, не спорю. Но, использование его будет ограниченным, поверьте мне. Сталь не для ножа. 🤷‍♂️

      @astakhiy_v@astakhiy_v29 күн бұрын

  • Your filing a file

    @asadhussain3770@asadhussain3770Ай бұрын

    • True :)

      @imadethischannel@imadethischannelАй бұрын

    • Thank you for taking your time to respond to me. Not much KZheadrs do

      @asadhussain3770@asadhussain3770Ай бұрын

  • Слишком долго чтобы пожрать.

    @Vlad22051969@Vlad220519692 ай бұрын

  • Asuuuu bajungaaan senjata yg tdk seimbang

    @fahriejateng8234@fahriejateng82342 ай бұрын
KZhead