Restore Old 22HP Diesel Engine // Restore Like New Diesel Engine
Complete Engine Repairing and Restoration How to diesel engine repairing - Repairing Damaged Old Tractor Engines - Restore Old 22HP Diesel Engine | Restore Like New Diesel Engine
- I hope this video useful for you and enjoy it!
Furthermore, I am very happy to receive your feedback, suggestions to improve my work.
- If have any mistake in the video pls let me know i will try to improve it as soon as possible.
- Thank you very much for choosing to watch my video.
Have a nice day!
Thanks for watching!
Please Like, Subscribe & Share!
► Subscribe to channel: tinyurl.com/m6brne9z
►More video D - Restore: • Restore Old 22HP Diese...
@D - Restore, #restore , #restoration , #repair , #D-Restore, #restoring , #diy , #restored , #restorationvideos, #DieselEngine, #TractorDieselEngine, #TractorEngine
Thanks for watching! Please Like, Subscribe & Share! ► Subscribe to channel: tinyurl.com/m6brne9z
The only restoration i found in this video was just lapping of the valves. Just clean, spray, and reassemble. Nothing even Torqued ?.
Поршневую забыл покрасить
🤣🤣
Depois eu tinta
ага и вкладыши
Kkkkkkk
First of all, the mud should be removed before removing the first bolt. Painting is the last thing and must be done with the engine already closed. Using an iron hammer is a bad word and the alternator should never be painted (cooling). Congratulations on making it work despite everything!!
oh yes, i cringed more with each next step of this work ;) good that it works, i guess it would be scrapped otherwise and now it did some nice views on the platform
From what I know an alternator is cooled by the air being pulled through the inside of it not over the outside.
Yes lets paint the the gears to WTF! engine revipainted
я понял. это не ремонт двигателя, а просто покраска.
Mới không có xì nhớt xì dầu mỡ máy ra ráp lại chạy ít bữa nhớt khói dầu mỡ máy nó ra ước máy
Sửa thế mà cũng quay lên đúng là không có việc gì làm
Ông này mới học sửa máy nè
Looks like a Kabota 850 ver good little engine.
We call that a liquid over hall. Usually done by done by someone wanting to sell for more than it is worth.
Take it apart, clean it and then put it back together. What did you rebuild?
Отличная покраска! 👍🏼 Теперь можно на алиэкспресс выставить😄
Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!
Это чурка даже не умеет в иронию и сарказм🤣🤣🤣
غير رائع
U did a great job, by painting the parts without masking the holes and other parts, with out putting new parts, not taking out the crank, no bearings change, not using a torque wrench.. Great job 👍
Thanks for watching and supporting me. Thanks very much!!!
Im sitting here and thinking the exact same things as this video is playing!!🤣😂🤣😂🤣😂🤣😂🤣😂
@@brandenoconnor7299 exactly bro 🤣
LOL Poor guy has never learned how to used the box end of a wrench!
Zero fucks given about masking, assembly lube, torquing, gapping, or timing.
Looks great 👍
Thank you watching video, Remember to follow me to see new projects !!!
Why does the location on this channel say 'United States'. Looking at this video, the clothing, the surrounding, the workshop, the language and the traffic noice I have a very hard time believing that.
Obviously there is a lot more than we see here. How did he time the shafts? How did he time the valves? etc.
Thanks for watching and supporting me. Thanks very much!!!
Что б клапана притереть,не обязательно разбирать весь мотор и красить)))
No restoration at all....just painting and cleaning :(
Хорошая работа, но я всегда думал, что прежде чем разбирать и ремонтировать что либо, нужно сначала очистить от грязи и помыть агрегат.
Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!
nice work on this kubota
Thanks for watching and supporting me. Thanks very much!!!
Szkolony u Majstra pod okiem Rafałka
Dzięki za oglądanie i wspieranie mnie. Dziękuję bardzo!!!
Got it done cheap . Thats what you call a tuneup and valve job
Thanks for watching and supporting me. Thanks very much!!!
вечно живой двигатель от японского генератора. реставрацией тут и не пахло,просто помыли и рукожопно покрасили.
Did anyone else watch in horror as the puller destroys the snout of the crank?
I almost shit myself when he hammered in the injection pump cam.
Berminggu-minggu usaha, terima kasih kerana berkongsi
Please share, support me by subscribing. Thank you!!!
Anyone else shouting...... No, No, No at the screen? Brave man to strip the injection pump!! hope he calibrated it! New Seals? Looks pretty at least.
Kubota great engine alot of the time they weren’t even worn out Just need nozzles some have 25 k hrs and barely show any sighns or wear
Thanks for watching and supporting me. Thanks very much!!!
It’s sure going to look good when it quits!
Thanks for watching and supporting me. Thanks very much!!!
Before disassembling the engine, you should clean the engine thoroughly , and drain the oil . Thanks
Y'all need to put some grease on those puller threads.
Thanks for watching and supporting me. Thanks very much!!!
Love all the world class engineers who can only bad mouth the guy , glad your perfect
Would you say the same if he were an aircraft mechanic?
@@ve3cwq47 glad your a heart surgeon
Basically something I used to do on the farm when I was 9years old
I'm surprised he doesn't break alloy parts whacking it with the club hammer all the time.
clean off the dirt and grease //as when it was new// when it was put to together as a new motor to do the job right !!! in new motor build your way-- you must add grease and dirt in new build //this why a new motor has no grease or dirt .as its clean
Thanks very much!!!
покрасить можно было полностью не разбирая
Beautiful Restoration I am waiting for the next video
🎉 muy buenos motores Kubota 3 cilindros te sacaste un 10 esperemos que sigas haciendo videos de motores diesel
Thanks for watching everyone. Please consider becoming a channel member to support future project like this!
Painting old pitted oil filter and reshuffling used rings and bearings, worth every penny of those $20 in labor.
Thanks for watching and supporting me. Thanks very much!!!
A mechanic who uses the hammer in everything that does not put any oil to lubricate the internal pieces and uses the hammer to hit the cam shaft Fuel pump really, how did this engine work? It's really a miracle
Thanks for watching and supporting me. Thanks very much!!!
You're welcome, thanks for accepting the criticism.@@Restoration-Reuse
It worked the same as before the so called "restore", running it without coolant at the end of the video certainly didn't help either. Much time and effort could have been saved by simple pressure washing and flushing the oil system. Maybe the guy needed to exercise his mechanic skills.
nice but you could have clan the engine first, but really nice restoration
Thanks for watching and supporting me. Thanks very much!!!
Tear down , clean up , and paint only !
A quick blast with a pressure washer and a coat of paint would have been more beneficial for the motor…….
Thanks for watching and supporting me. Thanks very much!!!
you tighten everything with drill???. the engine will take itself apart in 10 days of use
Never use a wire brush to restore head or block surface. And how long did he run it with no coolant in it?
Больно смотреть
I think this is a dong feng 3cylinder engine, I have had several of these running stationary water pumps 24/7 they are a great throw-away engine. cheap but efficient.
Its a kubota D1100/d1101, unless it was so slavishly copied they copied the blocks part number!
Great video quality and camera position Suggested: wash it outside before taking it apart with laundry detergent to remove dust dirt and sand; grease the puller threads
Thanks god you don't work for me
I was with you until the cleanup began, not a restore, just a bit of cosmetic cleaning and put old parts back together. Didn't take the crank out.
Not a torque wrench in sight. It might last an hour.
Yeah, not a restoration. Just putting lipstick on a pig
Restored,my arse,no new bearings,rings,gaskets,etc,just a paint pot rebuild that some poor sod is going to pay good money for and watch it go bang
Just painting kan do enough
@@ferdystrik4629 Paint is cosmetic it has no relation to the function of the machine
Muy interesante el trabajo , pero no fue completa la restauracion del motor , porque en todo el video nunca se saco el cigueñal para revisarlo , no reviso el estado de los metales de bancada , tanto del eje de levas como los metales de las bielas ,menos reviso el estado de las bancadas , no reviso el circuito de lubricacion del cigueñal , y esasfaltas de proligidad en un futuro podria causar daño muy significativos para un buen desempeño del motor , mi clificacion del 1 al 10 , serias un 5 como calificacon , espero que este comentario se para que mejoren y que sea de ejemplo .
Thanks for watching and supporting me. Thanks very much!!!
When the hammer. When the paint. Horrified....
Thanks very much!!!
Jamas llevaría un motor mio con este señor
Чтобы покрасить можно и не разбирать 😁
where are all the new parts for this restore job? looks like all it got was a ok cleaning inside and out, and some paint.
Thanks for watching and supporting me. Thanks very much!!!
First rule of mechanics club paint everything. Second rule, mechanics club paint everything. Third rule of mechanics club, Find a different club
أحسنت احسنت وشكرا والله يوفق الجميع لما يحبه ويرضاه .
شكرا لمشاهدتي ودعمي. شكرا جزيلا!!!
Ага , вот как оказывается двигатели капиталят. Разобрать , помыть , покрасить и лучше нового . Но на нем лучше не ездить .
Good, careful work.
great job I need one of those battery powered impacts
I never saw the actual fault, for why the engine was abandoned..? I've repaired a Kawasaki 3 cyl diesel, that the cylinder head was cracked thru the water jacket about mid way. A Yanmar also. What was the initial problem? Also- running bolts down with impact is kinda scary a little.
Thanks for watching and supporting me. Thanks very much!!!
cleaning first!!!!!!!!!!!!!!!!!!!!!! lasy job!!!!!!!!!
Exactly, it takes very little time to clean the engine first
I like the colour you painted it
Thanks for watching and supporting me. Thanks very much!!!
Отличное восстановление краски на двигателе. Остальное мытьё в бензине и сборка. ))))) вкладыши старые поставили ? ))) правильно после бензина они как новые .
Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!
Obrigado amigo
Мдааа Пакистан нервно курит в сторонке
Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!
Let’s be honest. How much does a set of rings and gaskets really cost? Not worth the effort to 1/2 year down. Unlikely it’s any better than it was before.
Myje się PRZED ! rozebraniem i maluję PO ! złożeniu. Kolejny "geniusz"
Dzięki za oglądanie i wspieranie mnie. Dziękuję bardzo!!!
I probably would've power washed before but good video.
So what did this engine come out of?
Please use new rings on pistons next time and plenty of oil for reassembly On the engine will last a lot longer
I love cleaning process 🤤
Thank You for Watching! Please Subscribe 🥰😘 And Check My New video!!!
Для того что бы покрасить двигатель не обязательно его разбирать
Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!
I like the DCA 20volt impact and its amazing watching from the USA where everything is either DEWALT, MILWAUKEE and so on.
Thanks for watching and supporting me. Thanks very much!!!
Bloß nicht den Sand abwaschen vorm zerlegen. 🤦🏻♂️
Danke, dass du mir zuschaust und mich unterstützt. Vielen Dank!!!
Very lucky the pistons were good. The rings were not gummed in place either. Being cast iron it will forgive you not precisely torquing the head on. At least you did a sequence that should stop any head issues. Well done.
من افضل المهندسين👍
شكرا لمشاهدتي ودعمي. شكرا جزيلا!!!
a lot of work for a paint job, cause there is nothing that has been exchanged so it is no way near a rebuild
Thanks for watching and supporting me. Thanks very much!!!
Thanks for jim from Robot Cantina, now I know its a Kubota engine !
Me gusta como le pones toda tu pacion al restaurado del motor de tractor y se lo que se siente por yo tambien e restaurado varias veses diferenciales dana y me gusta todo el proseso del desarmado limpieza restaurado y rearnado de todo y es muy relajante
- Thank you very much for choosing to watch my video. Please leave a like if you did like the video, please subscribe and feel free to comment with your thoughts, and as always thank you for watching.
Ten silnik trzeba było potraktować myjką, dopiero potem rozbierać.
Dzięki za oglądanie i wspieranie mnie. Dziękuję bardzo!!!
Und nichtmal die Zylinder nachgehont und die Kolbenringe erneuert, da bringt die blaue Farbe auch nichts...
Danke, das merken wir uns!
Super. Bravooo!
Thanks for watching and supporting me. Thanks very much!!!
Bravo, oui et non, on n'entame pas un démontage complet sans au moins nettoyer la merde autour du moteur !!! Sinon, oui, super !
GREAT JOB. COMPLIMENTS ( FROM BRAZIL)
Nice to hear that, thank you very much :-)
Mesin itu di pasang di sepeda motor tossa bagus
Terima kasih telah menonton dan mendukung saya. Terima kasih banyak!!!
Could have done all that with a jet wash....then a paint job...hours work....job done.
Thanks for watching and supporting me. Thanks very much!!!
First of all, before tear down the engine, cleaning outside with high pressure Waterjet cleaner!
Засранный мотор разбирать , предварительно не помыв - визитная карта криворуких спэцов.Монтаж делал,судя по всему,глухой,чтобы ему гайковёрт снился.
Ваш комментарий очень правильный, спасибо, что смотрели и поддерживали меня. Спасибо большое!!!
I love the blue color. very cool
Why is nothing ever cleaned before disassembly?
Good job !!!
Thanks for watching and supporting me. Thanks very much!!!
very good and meaningful
Not really a restoration. More of a cleaning...
Thanks for watching and supporting me. Thanks very much!!!
Làm tốt lắm
😂.جهود جبترة أهم شي لا تنسى مواقع المسامير والصواميل والمعايرة أهم شي ذراع العزم للتكايات والبساتم
Chúc mừng em
Ваш комментарий очень правильный, спасибо, что смотрели и поддерживали меня. Спасибо большое!!!
old new , :)
Thanks for watching and supporting me. Thanks very much!!!
Nice work
Good job 👏 one day you will make a great mechanic hopefully you can get somewhere where there are parts and torque wrenches exc exc but you did great with what you had
Thanks for watching and supporting me. Thanks very much!!!
This guy is straight trolling all you guys who buy stuff of the strap-on truck!😅
Thank you for watching video🥰🥰🥰