And this how you get cheep parts at the parts store
@davidcraven2776 ай бұрын
Интересно откуда взяли новые ламели, по которым щетки бегают......
@HUIVAM6 ай бұрын
Amazing!
@Topjake14926 ай бұрын
Congratulations that was so good to watch. You Sir are a true professional in your chosen career. Thanks for showing us all how to make the most of what you have. 👍🏼
@kevdimo64596 ай бұрын
這翻新技術就是專業，佩服❤
@lww39885 ай бұрын
Excellent...
@offpherj78846 ай бұрын
عمل رائع
@Hmod-Al.motiri6 ай бұрын
Wow that's Great Work 💯
@Foodveloger6 ай бұрын
Thanks 🔥
@WowThings6 ай бұрын
I learnt to be patient lol
@fahadalmudayfir5712 ай бұрын
Nice! And an optimistic colour you've chosen for it :)
@ramayasket6 ай бұрын
Thanks! 😊
@WowThings6 ай бұрын
Sir,Which cemical do you use to clean those parts?
@KanchantraverseIndustries5 ай бұрын
I think gas
@806845 ай бұрын
👏👏👍👍🙏
@stony78276 ай бұрын
Muito bom
@joaquimlimanascimento45126 ай бұрын
Stay connected.
@WowThings6 ай бұрын
厲害
@yeungyeungjohn5 ай бұрын
If you read the instructions manual. Under "Disassembly" it says "Set it on fire" that way the harmful chemicals and gases safely go into the air and water supply.
@MaxmadV86 ай бұрын
Межвитковому замыканию быть😂😂😂
@benzo-745 ай бұрын
Just not the same with all new tools. Need more dirt :(
@mosizlackm75226 ай бұрын
*bearings left the chat*
@sysierius6 ай бұрын
English here is also needed 😭
@bryanmontello57024 ай бұрын
You guys did a much detailed and better job at this restoration than I expected. Please do more restorations from Pakistan. Thanks!
@lovehatecomments3 ай бұрын
Огонь..)))
@natalex026 ай бұрын
Yeah sure. Except you spent most of the time making it LOOK better, and wasted a lot of time redoing things that didn't need redoing, and didn't do things that needed doing. And scarred up the shafts. and tediously wire-brushed up the copper conductors. And annealed the main shaft. And soldered instead of spot-welded the wire ends. And reused the old bearings, didn't even wash them out and regrease the bearings. And reused the old sprags. And reused the old brushes. And didn't seat the brushes. And didn't refurbish the engagement solenoid or relay points. And didn't burnish the commutator. And didn't put down a coat of primer. And didn't test the final product under actual conditions for noise, engagement, torque, or current draw. A true "Craigslist" or "Chinese" rebuild. Nobody wins at this game.
@georgegonzalez24766 ай бұрын
ouch.
@zhugeliang7776 ай бұрын
What do you expect for $50 ?
@kevwills8585 ай бұрын
Thank you for shining some light on the plot holes of this theater performance!!
@Fanzindel5 ай бұрын
Actually all video could be like 5 sec in the beginning and 5 sec in the end 😂
@Kato_pa5 ай бұрын
Jesus calm the F down! It probably works for them and their needs. They did what they could or had the means to considering circumstances you can't possibly understand not being from that part of the world. Of course it isn't perfect or did the best job. Calm down and go hate on something/someone else. WTF is wrong with people these days.
@lovehatecomments3 ай бұрын
Эй, зачем покрасил, дорогой!? Все исиспортил!)))
@user-bj7he7xc6s6 ай бұрын
Уважаемый, сколько по времени занимает эта работа?
And this how you get cheep parts at the parts store
Интересно откуда взяли новые ламели, по которым щетки бегают......
Amazing!
Congratulations that was so good to watch. You Sir are a true professional in your chosen career. Thanks for showing us all how to make the most of what you have. 👍🏼
這翻新技術就是專業，佩服❤
Excellent...
عمل رائع
Wow that's Great Work 💯
Thanks 🔥
I learnt to be patient lol
Nice! And an optimistic colour you've chosen for it :)
Thanks! 😊
Sir,Which cemical do you use to clean those parts?
I think gas
👏👏👍👍🙏
Muito bom
Stay connected.
厲害
If you read the instructions manual. Under "Disassembly" it says "Set it on fire" that way the harmful chemicals and gases safely go into the air and water supply.
Межвитковому замыканию быть😂😂😂
Just not the same with all new tools. Need more dirt :(
*bearings left the chat*
English here is also needed 😭
You guys did a much detailed and better job at this restoration than I expected. Please do more restorations from Pakistan. Thanks!
Огонь..)))
Yeah sure. Except you spent most of the time making it LOOK better, and wasted a lot of time redoing things that didn't need redoing, and didn't do things that needed doing. And scarred up the shafts. and tediously wire-brushed up the copper conductors. And annealed the main shaft. And soldered instead of spot-welded the wire ends. And reused the old bearings, didn't even wash them out and regrease the bearings. And reused the old sprags. And reused the old brushes. And didn't seat the brushes. And didn't refurbish the engagement solenoid or relay points. And didn't burnish the commutator. And didn't put down a coat of primer. And didn't test the final product under actual conditions for noise, engagement, torque, or current draw. A true "Craigslist" or "Chinese" rebuild. Nobody wins at this game.
ouch.
What do you expect for $50 ?
Thank you for shining some light on the plot holes of this theater performance!!
Actually all video could be like 5 sec in the beginning and 5 sec in the end 😂
Jesus calm the F down! It probably works for them and their needs. They did what they could or had the means to considering circumstances you can't possibly understand not being from that part of the world. Of course it isn't perfect or did the best job. Calm down and go hate on something/someone else. WTF is wrong with people these days.
Эй, зачем покрасил, дорогой!? Все исиспортил!)))
Уважаемый, сколько по времени занимает эта работа?
Максимум 20 мин.