How to Easily Fix Cracks by Plastic Welding!
2020 ж. 21 Нау.
1 339 410 Рет қаралды
Sometimes a crack in a bumper will be sent to the dumpster real quick, but with the knowledge in this video they can easily be fixed. In this Episode I am using the most basic plastic welder to repair a 6 inch crack in a plastic bumper cover. I have broken down the steps to make it easy for any DIY attempting bumper repair for the first time!
TO PURCHASE SHIRTS AND DECALS: paintsociety.bigcartel.com/
To share your project or ask questions please join our facebook group page: / 440942309941585
IG: paint.society
Plastic Welder: amzn.to/2KCHVJI
Glazing Putty: amzn.to/3c30GkT
Flexible Primer: amzn.to/3iDXv4A
As an Amazon Associate I earn from qualifying purchases.
To support the channel and purchase Official Paint Society Shirts and Decals: Paintsociety.bigcartel.com
Just wanted to say many thanks. I've been watching your posts for a while now. Had been going to ask how to do plastic repairs as I'm trying to repair a gsxr. The fairings are needing cracks filled and painted. Other issue is the bike had been knocked over in my garage and the petrol tank had an axle stand pierce the tank. What would be the best way to pull the split edges together, I did purchase a two part metal filler to plug the hole in the tank although there is still a crease hence I'm unsure of best way to repair, fill and sand as to get the best finish possible. I'm spraying the bike to match my wifes weekend toy which is an obsidian black 2.5 ltr Subaru Impreza sti. The Subaru J32 obsidian black has an amazing colour and very light sparkle to it. Also I've seen some paints that can supposedly spray the alloy frame. Any tips on painting those. 1507Lachlan on Instagram 😀
I've been in the paint business for 50 years , us old guys can always learn something new ,I really appreciate your show And take care !!🍺🍺
As long as your willing to learn you never get too old
It’s always nice when a professional will take the time to show us wannabes how to attempt to do what they can do in their sleep. Thank you very much.. This is an excellent video well narrated and produced.
Thanks Robert. I read and listen to all the comments and even better videos follow.
For those not having the equipment, a zip tie does it equally well. Use a lighter to set fire to, and melt, the zip tie, while holding it above the damage. The drips from the melted zip tie bonds with the plastic, and it gets really strong. With a bit of practising, the result can look like a TIG weld.
thats how i used to apply p-tex ski and snowboard base repair. thanks for the tip!
@@tomr1107 You have to make sure it's the same type of plastic or it won't bond.
Cant control temperature of the plastic its dripping on so wont bond together or weld together,have you done the right test to id the plastic that needs fixing ?
The damaged plastic must be melted as well to mix with the filler plastic. Drips of burned plastic will not heat the damaged plastic to the correct temperature for melting and will barely stick to but not bond to (or repair) the damaged plastic.
Awesome info as usual, and I enjoyed your detail. No skimping on process, which matters!:) Proper repairs make a world of difference for lasting quality. Some of us are working on those special projects we don't want to pay an arm and leg for, so knowing how to do it right really helps! Thank you!!
I just love the way you explain the process, please keep it up.
Hello greetings from Tijuana Mexico. I own a small paint and body shop and I am very happy to have you share your knowledge with us.
I’m going to try this method on my cracked bike plastic parts. Thank you for sharing
Awesome tutorial my friend. I really like how you take the time to thoroughly explain each step by step.
Cool..good to know..bought my own first ride on a manual to learn how to drive, had mini accidents that fd my bumper & got it replaced for a couple hundreds..so i appreciate the time you put in this video to show us how we can invest in a tool like what you have shown us so we can diy our cars in welding plastic. Thanks man.
Great repair and super video. I've begun to try repairing plastic (not car bodies), and this is really helpful. Thank you for sharing 🙂
Thank you Brian, you spent a lot of time and finally you did a great job.
I have a tip for you. If you want to speed the process up a lot you can get one of those little pencil torches and use that along with the flat tip to get things warmer faster. I use them all the time and my crack repair time is 75 percent faster. Obviously, you need to be careful not to get the plastic too hot but you know that. I have repaired hundreds of cracks with a torch and the welder and never had one fail. I also wanted to say that I actually think that my welds with the torch are stronger because I find that the plastic welder just doesn't get the bumper cover hot enough to bond all of the plastic together
Thanks. Great tip!!
Love this one! I bet the repair gave the panel some strength. I've done this with minimal tools and success. After watching this I feel I could confidently make a proper repair. Your awesome Brian, thank you for sharing your skills with us!
Thank you. It doesn’t take much after you watch the video, it just takes patience. No real skill needed.
This video came at a perfect, thank you , we have to fix my sons bumper , we bought the kit a while ago, i have never fixed one , but you just made that easier for me, once again, great video
Let me know how it goes !!
Brian awesome advice thank you I restore scooters you made my life so easy again thanks , and Stay Safe !
after watching this, now I am qualified bumper restorer.
that's really good, I didn't realize that could be done.
Very informative Brian .Great tutorial!
I have used this to fix my Honda engine cover. The back pins broke and I’m not paying $300 for a new one! Multi use tool and polyvarence support!
Once again.thanks for the lesson.having the right tools.for the job,is the key. Brian please stay safe. 🇬🇧
It is key! Stay safe
Thank you for the no BS, clear and concise video. This has really helped me out. THANKS!
You are a good instructor. You speak clearly, good pace. Thanks for clarifyin WHY you need aluminum tape. I learned lots and enjoyed it too
Hi Brian i always learn from you. THANK YOU FOR YOUR VALUED TIME.
Well done👍👍Your videos are a true asset to society education. Keep up the good work. Doc🕊️
Fantastic, had no idea how it was done CORRECTLY. Lifetime repair I dare say. Many thanks for sharing.
Thanks for your clear and detailed video. Now I feel comfortable repairing my older BMW’s damaged bumper cover.
Very interesting and very clear explanation, thank you. I wish you to stay safe and healthy during this scary pandemic moment!
Thank you!
used this video to put the mesh on my new hood scoop so I can start to bond the scoop to my hood now so it's functional. thank you!
Thanks for the video, I have a project I'm working on and this will come in very handy.
DUDE!!! you literally have a video for every repair i need to ever do! .....and always a top notch, detailed tutorial that educates while entertaining. Thank you for all the work you put into this channel brother!! Very much appreciated! - Hawk
Thanks Ryan!!
Nice repair. I loved the detail and the way you explained the process 👍
Awesome repair and video. Thanks for sharing! Hope you and the family are staying safe with this epidemic
Thanks for watching Juan. Doing just fine, but more work is so slow.
Hi Brian, I'm from Australia and just want to say great tutorial as its a different way to how i repair plastic. I use a hot air welding gun and heat up both plastics and let them fuse together.
Thank you, great tutorial.
Very informative I learned something new. I actually just sent my bumper to plastic weld just wanted to see what’s the process. Thanks a lot
I love watching these how to videos! For some reason with body work and painting projects I end up throwing something, cussing or messing it up more!😁
Pretty neat! Always wanted to know how to weld with plastic. What I have been doing is use Fiberglass mesh from screen doors and windows and glues the mesh to the joint with 5min epoxy, then Bondo the front.
This by far is the best welding kit I've seen!
It’s pretty good. Simple
Excellent tutorial on plastic welding, great tips, thank you
Good, informative video. Many thanks for taking the time.
Excellent demo and tutorial. I very much doubt however that a "professional" will ever take so much time or apply all the steps to effect a good result
Great instructional video! Being a fabricator welding plastic for years my tip is to use acetone on PP or PE to clean before welding.
You are a great teacher, Thanks for all your insight!
Thank you, very informative!
Hi Brian, great video. From my limited experience, drilling a hole in each end of the crack would prevent the crack from expanding further if the area was to be damaged again. This would be done before the sanding usually. 👍
That sounds lik a good idea👍👍
That's what they do to stop cracks spreading in glass and engine blocks/cylinder heads.
Thank you for that idea about the holes i am going to use that when fix my cracked front bumper..
Great job, very professional! Thanks for sharing!
Thanks God for those who shares with their talent. They're instruments of Your blessing to others who are in need of knowledge fixing personal prob in a lighter way. Bless you 😃
Great explaination, great demonstration. THIS is why you are a professional, who gets paid the BIG BUCKS!!!
Wow thats great - did auto coliision 10 yrs ago and man has it changed - it looks more fun now
Been using this process for 20 years.
Thanks a lot friend, you're a star. Thanks for the knowledge indeed.
Thanks for sharing! Tons of info and well presented. Great job!
Thank you!
Very nice job brotha! Thanks for the videos thru these crazy times!! Keep up the great work bro!
Thanks Mike!!
Great content! Keep up the amazing work!
Great information and delivered like a pro. Thanks
You are very talented indeed... Great video Mike Ruffalo.
9:10 Where The Tires Slip as the Supercharger kicks in Great video by the way man thank you so much Keep up the amazing work
Thank you very much for such a detailed and clear instruction.
I'm trying to start a business in this field and ur video wS much more helpful then instructional videos
Great work and I see you got a new helper!
I see you watched the video until the end lol
thanks for the video Brian,Stay safe 👊
Thanks Kamil!!
Dang, never knew there was a kit for what I did with a scraper, trimmed off piece and solder iron. Very nice. Thank you.
Got a nasty crack in my range rover bumper and this method although time consuming was the way to go thanks for the tutorial 👍🏻
very cool to see it now on youtube when i did it 15 years ago to my scooter panels
Very well presented! great learning experience.
I have never seen plastic welding before. It was very interesting and educational thanks.
very kool tool!always wondered about something like it.I do it old school,butane torch and any plastic i have laying around.Thank you for the insite!
Great job showing each step
I've probably shortened my lifespan after doing some plastic welding but the repairs are nice and solid. It saves throwing them in the bin and didn't cost me anything.
Yeah. I was wondering why you guys aren't wearing masks
@@debrac1688 When plastic welding now i either do it outside or with a mask on next to an extractor fan.
I use a propane torch, an old screwdriver and black zip ties(for filler rod). Worked on a radiator, interior plastic, broken headlight (the back side of course, not the clear front side). Haven't tried it on a bumper cover yet but I'm sure I'll have to eventually
It went awesome,, bumper looks great , thanks for the video it did help out , keep them coming
Thanks!!
great demo.I`ve done a bit of plastic welding and this video has great info.Thank you.
Very impressive repair - well done
Thanks for your lessons
Another great video, Brian. Stay safe!
Thanks David!!
Great video. Thanks a lot for sharing those pro skills 👍
God bless you. Bravo. Bravo.
Looks better than my soldiering iron and cable tie repairs. Thanks for sharing.
But your technique is good for a Diy job where anesthetics aren't so important.
good job, i do the same but different,,when i get a bumper that needs to be replaced , i take the no good bumper and i strip the paint off of it and i cut strips of it and save it to melt on a bumper that needs to be fix down the road,i save money ,and i can fix a bumper pretty cheap,,,my heat rod is a 10 dollar rod from princes auto ,,people laughs at it [or at me], i really donnt care because it gets the job done,,and when their 300 dollar heat rod broke,,than they ended up buying a heat rod like mind,,,now whos laughing,,i am enjoying watching your videos, for i am learning something from every video,,,i just wanted to say,,,thank you and your follow workers for shareing,, thank you
Awesome and you’re right. You think smart and taking apart a old bumper is a way to save money!
I weld the crack to parent plastic only and it works every time. The green lids off milk bottles in the uk work well as filler. Yellow 110 volt site plugs also work well as filler if cut into strips. I did a video on how I do it.
kzhead.info/sun/hq2PZrWKsHdmkoU/bejne.html
You're amazing! Very nice video and very educational. Keep the good work
Great job. You make it look so easy. Thank you sir.
Well done👏🏼👏🏼👏🏼👏🏼
Thank you for sharing wonderful informations.
Wife comes in at the end " What's Burning "
Lmao, so does the shop 🤣
Been doing plastic repair for years also, and just have to be that guy who point something out. . Of course : great video! Liked it a lot! In my experience, preheating the object with a heatgun until you see it becomes just a bit sweaty, (not much tho) will bond better. Plastics bond the best when both sides are “tangible” (hot) The massage after is what really does it. Too much heat can do the opposite favour of what you want, so mess around and make notice.. 220degrees C is a sweetspot. +/- 20 imo... Mostly i use handheld extruders with temp settings.
Best video about this topic. Great job
Thank you!!
Thank you Brian.
Dude you are awesome ... thank you for making these videos!
Excelent video bud! Thanks for sharing!!
Thank s for share your knowledge
I love it I never used the flexcore on both sides. Just on one and filler on the other with the like bondo on the other
Great job!! I also use steel wool on the bottom side to give it a more stabilizing benefit. As you say it’s only paint. Best regards, Richard
Fantastic information thank you
Can’t wait to try this on a rare bumper lip I got from Japan
kzhead.info/sun/rKWocaZ9gGmZf3A/bejne.html
Wow man ausome a lot of work but it looks challenging I like much appreciated 👍 grate knowledge thank you for sharing your experience and skills with all of us around the world 🌎 cheers and kindly 😀
I have used plastic padding and or epoxy glue. A little bit of heat ,not to melt but to soften to enable a better bond.
Wow, Great info on plastic bumper repair!!! Great lesson
Nice video Good plástic Welding tool 👍
Good job buddy, its pretty helpful, thank you so much for giving information in detail👌👌👍😊
Thanks for sharing this.