Follow along as I repair a broken push blade arm on a Bobcat Mini Excavator
Пікірлер
One of the things I really appreciate about these videos is that even though you sometimes deal with horrendous previous repairs, you never say a bad word about it. Just get on with what needs to be done. The mark of a true professional is that their work speaks for itself. No need to bring others down. Cheers.
@OkinawaWild3 жыл бұрын
I’m a engineer and this guy has a better understanding of stresses in a repair joint than some of the “expert engineers” I work with.
@razorbackg.70043 жыл бұрын
Perhaps that's 'cos he have seen and repaired more cracks than all of them together! *smiles
@samos_sainz3 жыл бұрын
Because he’s in the field. And those guys are like well it works on my computer. Engineers, so smart and yet so wrong so many of the times.
@JimBob-tk5zx3 жыл бұрын
Practical visual deduction built on decades of first hand experience he is pretty spot on repairs especially in the field applications , abused machinery in rocky areas makes him invaluable on recommendations for fixes..🤔👍🤙✌️😔❄️🙏
@milotorres68943 жыл бұрын
@@JimBob-tk5zx a computer is one thing practical hands on is of another brand for sure real worker gets my vote any day..🤔👍🤙✌️😔
@milotorres68943 жыл бұрын
@@JimBob-tk5zx same thing I experienced in the army. Was trained on theory but field experiences was totally different.
@johnghatti54353 жыл бұрын
I don't understand why some people leave a thumbs down for IC Weld. The only thing I can think of is either they're envious of his skills or they don't know what professional work looks like?
@simplicityisbliss3 жыл бұрын
I betcha most of them are accidental
@Prestiged_peck3 жыл бұрын
It could also be people who see this kn their recommendations, and dont want it to be. So they dislike it; that way it wont come up again.
@wicklash90652 жыл бұрын
The real thing that makes you good is your lack of ego. You just know that your work speaks for itself. I have learned a lot from you.
@carlinlentz68492 жыл бұрын
Thank you.
@ICWeld2 жыл бұрын
Your videos are my favorites on here. I like how patient and humble you are with your repair work. The good vibe rubs off on me and travels with me to work. Thank you for sharing your time with us.
@lakeviewgarage31033 жыл бұрын
Thanks for explaining in plain english most of the problems with patch plates. Spot on every bit. Thanks for sharing ... again.
@buttheadsmith70123 жыл бұрын
low key guy I ain't never seen upset by any welding situation. that's from years in the field, liking what he's doing and making it his business to keep up with advancements in the trade. the man deserves all the success he has. love watchin the guy at his craft.
@marcuscicero95873 жыл бұрын
Thank you for the kind words. I rarely get surprised anymore, hehe. I've seen my share of broken things in the past 30yrs,
@ICWeld3 жыл бұрын
I C Weld = Clicking the "thumbs up" even when you just started to watch his video.
@thebestleathers1053 жыл бұрын
Yuuuup
@MRI520guy3 жыл бұрын
yup me too!
@jamieaustin64033 жыл бұрын
Howd you know
@7rixee3 жыл бұрын
I'm trying to make similar content on my youtube channel. I think that you may find some entertainment in my content. I think the work this guy does is awesome, especially for a small, homebrew shop, exactly like the one I work out of. I plan on releasing many videos to come on my repairs.
@losrussets89453 жыл бұрын
How to tell if a video is good if you havent seen it? 😐
@Muncles3 жыл бұрын
I love your description in the beginning on 'bush fixes'. Never judge someone's poor quality work if you weren't there to see what happened. In the real world sometimes you have to work with what you got, even when it's poor materials, lack of proper tools, limited skills, and a timetable. So many so called 'professionals' don't appreciate real world situations that result in the crap you end up fixing properly. You clearly do. Bravo. And props to the customer who was willing to pay you to fix it properly vs insist you patch up the broken welds.
@knurlgnar243 жыл бұрын
I try and never criticize anyone's efforts. Just as you mentioned, you never know the situation they were in to keep the machine running.
@ICWeld3 жыл бұрын
you're the rare combination of engineer and fabricator. lots are good at one or the other but the really talented are good at both.
@a-fl-man6402 жыл бұрын
I truly appreciate your humor and humility. You are a genius and a gentleman.
@humancattoy77673 жыл бұрын
You sir are my hero. Very skilled. My favorite part about you is that are HUMBLE! You're very good at what you do my friend.
@sledsports3 жыл бұрын
Thank you so much
@ICWeld3 жыл бұрын
Was also going to mention the fact that a repair that looks like stock can usually translate to a higher resale price down the road. I bet a seller can make back every penny they pay you to do the super awesome job that you do. Many thanks for sharing you knowledge!
@waiakalulu24723 жыл бұрын
You are a professional man, love how softly spoken you are and nothing ever seems to be a problem for you, you are an inspiration for welders and men everywhere.
@Tunzbig Жыл бұрын
Heat affected zone will get you every time. Your approach to repair speaks to your years of practical first hand experience. Excellent job on all your repairs. Glad the Miller Equipment serves you well!
@russellgilson40723 жыл бұрын
I love your rather dry self- depricating sense of humor when describing your skill level.
@ronaldziehlke97203 жыл бұрын
Mad respect for the way you handle the differing opinions on how to do these repairs.
@techbilly1193 жыл бұрын
Your absolutely right about the patchplates. Most often there occurs a new break just next to the pplate.
@willemstreutgers11543 жыл бұрын
Totally agree. Seen it many times. Not that I’m right to do this. But I usually try to only stitch the patch plates on if I can. Roughly a one inch weld and a one inch gap - - - - - seems to keep it from cracking more. I dunno why. Less heat maybe. Also like that if one of my weds crack it usually only cracks that one weld and doesn’t propagate across the whole part.
@Mad.Man.Marine3 жыл бұрын
Seems to help if you make the patch triangular or diamond shaped so that the stress riser doesn't go straight across whatever your fixing.
@Lucas12v3 жыл бұрын
@@Mad.Man.Marine like drilling a hole a the end of a crack. Doesn't have material for the crack to follow threw
@pooinyourass3 жыл бұрын
@@Mad.Man.Marine I agree stress is less memories of practice plates beads heat curls it up same direction of heat less stress more strength and relieve spots kinda built in stress relief zones works on sheet metal spot welds. Ears could be 1" sléeved welded in and pinned both sides ,not much abuse unlesspushing big boulders around Texas is famous for in,that neck of the woods., 🤔🙏👍😊❄️🤙✌️
@milotorres68943 жыл бұрын
Fish plates. Round corners or tapered. The stress/strain increases with sharp transitions. I agree you can’t make it better fish plating everywhere all the time, sometimes just fix the crack and leave it that way is better. Depends on the job
@paralou85763 жыл бұрын
I learn from every video you do. Appreciate ya takin the time to do it.
@treddirt3353 жыл бұрын
He is good at his work. I weld and repair also. What I like about his videos he is not constantly talking.
@gilbertbrewer269 Жыл бұрын
To the casual observer it's hard to understand the EXTREME pressure you can be under to get a machine back in the field. Having that machine can make or break meeting a construction deadline. So ripping things apart like this and getting it back together is a testament to the skill and experience required. Most customers draw the line somewhere of where to stop a repair, and it's usually based on whether they know they can still make money with it as it is and the time that the machine is out of production. It's a tough business.
@waiakalulu24723 жыл бұрын
I go two thumbs up for the idea dealing problems at the root! It’s goes like someone started a lie and would follow a thousands lies to back it up! Remove the problem and start afresh, like here, would solve the problem and more importantly stops future problems coming! That’s the best solution! Well done!
@philipwai50833 жыл бұрын
* go with two thumbs..
@philipwai50833 жыл бұрын
The reason why some people give a thumbs down is because they think they know better. I’m retired and worked with many welders but this guy is king 🤴
@robertdominiczak65232 жыл бұрын
I love the casual competence in all of IC Weld's vids. It's obvious to him at all times what needs to be done.
@Hinch553 жыл бұрын
Thanks for letting us in your shop.
@neptune41673 жыл бұрын
I love watching your repairs. I am an amateur welder , i like making home projects or doing bodywork. Welding fascinates me.
@lar4305 Жыл бұрын
I welded farm equipment all day to help prepare for the growing season up north here near Chicago. I coma home, had dinner, and now I am watching you weld up heavy equipment. You do good work! God bless and have fun!
@rh59713 жыл бұрын
I absolutely love your work!!, I’ve been telling guys for decades that the more heat you put into those parts make the area weaker and not stronger. Metallurgy 101. Not a lot of guys even know what metallurgy is. Keep up the great work!!!
@robpeters52042 жыл бұрын
Thank you for all you show us Isaac! Im in welding school at the moment and your videos really help me learn that little bit extra about the field. Before i would look at a crack and kinda wonder how the heck to get in there and fix it. Now i can say i almost feel confident enough to touch a backhoe repair. We need more men like you out there.
@wicklash90652 жыл бұрын
Just subscribed!! When you explained your experiences with the plates used in the previous repair, that was a piece of information I always wondered about, and my thoughts were the same as your experience. Watching your videos makes me a better welder, and I thank you for it.
@kevinflowers31305 ай бұрын
Looks like they've been grabbing the blade when they were digging. I think that's how they broke it. Common sense matters!! Welders matters!! Great job Issac!!! " Flash" in Tennessee
@flash80D3 жыл бұрын
Probably explains the sloppy pin holes too. Lots of up/down on the same axis with the full weight of the machine.
@ZaphodHarkonnen3 жыл бұрын
Great job, IC. That was a great explanation about using plates on flat breaks. Your explanation about creating weak points by over building others makes a lot of sense. Love your work!
@markreetz10013 жыл бұрын
Glad it was helpful!
@ICWeld3 жыл бұрын
Cracks are caused by cold working embrittlement, which could have been prevented by heat treatment before the crack began. Making the area stronger will shift the cold working to the immediately adjoining area.
@0MoTheG Жыл бұрын
Great job love watching a professional work and explaining why and how he does what he does. THANKS will be waiting for the next one
@georgewarlick32523 жыл бұрын
Appreciate what you do; You keep the wheels turning for the rest of us who don't even realise that things go wrong. Thanks.
@markalexander51242 жыл бұрын
Watching you has made me a better welder I can say and a better outlook on repairs. Thank you for your vids and hard work
@jjt10932 жыл бұрын
Great explanation of the patch plate repair. I'm trying to understand preheating and over heating. Positive attitude is much appreciated as well. Thanks!
@seriousorry3 жыл бұрын
Pre heating. When u start a weld. Yr introducing heat The welding to cold parent metal which isn’t ideal. If you pre heat to say 100 degrees and then start weld. You get far better penetration and far deeper into the parent metal. Thereby creating a stronger weld Post heating is a stress relief technique. Once you finished welding. By post heating. U on a molecular level. Reposition the metal particles and they realign themselves evenly. And thus. Creating and spreading stress if any. More evenly throughout the parent metal the weld deposit and the heat affected zone which is found either side of the weld on the parent metal Hope it makes sense
@tontobb89562 жыл бұрын
Hello my friend greatly love your videos please keep sending them I'm watching from Alabama
@lancetucker45183 жыл бұрын
Speaking from an old school/old fart point of view, I’m right with you on your mig comment! I still prefer 7018 & 6010 stick over solid wire mig, but if you ever have the chance to try dual shielded flux core, I think you’ll love it! I ran it for years with Co2 shielding, .045”, and it’s great in all positions on everything including thick plate! Had to test (x-ray) several times in 2G, 3G & 4G - 3/4” plate to AWS D15.1 standard, and never had any issues! Of course it wouldn’t be the thing to use for field repairs. Also liked that you replaced the whole piece of square tubing instead of stitching it back together! Gives a much stronger, better looking result!
@tomt95433 жыл бұрын
I've been meaning to try dual shield. I just might try a roll one day.
@ICWeld3 жыл бұрын
@@ICWeld .045”. 25.5 volts & 265 to 300 inches/minute wire speed, CO2 at 50. You will love it for in shop projects! Much nicer than straight flux cored. Stay well!
@tomt95433 жыл бұрын
Nice video 👍I don’t even weld, I work in IT, but I find this so interesting .
@johnsukie79323 жыл бұрын
Same here...cloud engineer...enjoying welding video
@brianwatson97893 жыл бұрын
Same day turnaround ,his concerns were the loose ears on base , quick fix was a no go, on washer plates, run n gun job probably didn't have longer pins to utilize fix ,nice work as usual from Issac , good clean ground helps
@milotorres68943 жыл бұрын
Helps flux core unless base was just cruddy see you were fighting to get flow on puddle arc blow w/.040 maybe contacts on trigger carbon marked.,🤔✌️🤙🙏😊😊👍❄️😔
@milotorres68943 жыл бұрын
That's cool that you tech nerds have an interest in these things. Might put some of these pointers into your line of work some how some way.. *cheers
@Trey4x43 жыл бұрын
@@Trey4x4 Shows that smart people regardless of their trade recognize greatness in other peoples trade. Many trades i.e. Doctors, lawyers, engineers, teachers delude themselves into thinking I am so smart because my education bla bla...but the great people in any trade know greatness when they see it and they tend to be humble because they can be in aw and respect other peoples greatness.........love this channel and the man!!!!
@artstudio96733 жыл бұрын
Bad pins and bushings led to flexing and broken welds. This excellent repair will be undermined by the sloppy bushings. You did your best repairing the machine and offered excellent advice to your customer. That is worth the money.
@laszlovass73263 жыл бұрын
IC you da man. Just starting to teach myself to weld, for hobby only and luv watching your vids for info. You are so down to earth and humble. The world needs more peeps like you👍 Keep the vids coming.
@weets693 жыл бұрын
Most projects are so intriguing. Quite an artist with the torch and gun. Low key humble guy with an abundance of talent and an educated eye. Love watching educated hands work. IC Weld, cheers!!
@russmcelreath56233 жыл бұрын
I can hold my own with minor stuff. You can hold everyone’s. You’re an artist Subscribed
@mattl17583 жыл бұрын
I love how not only are you a master welder but the way you explain the how and why the way you make the repairs! For example pointing out that if you beef up a weak point with a gusset plate it will just transfer the weak spot to the next weakest point. Most of us know that you don't replace a shear pin with a stronger part in order to stop breaking shear pins, you point out that it is the same with other repairs that are not as obvious! You also explain some of the other issues and complexities that the weld or repair introduce to the the equipment. I can weld ( a little) and I have an engineering degree, you have skill, knowledge, understanding of all the variables and most important experience!!!!!! Thank you so much for your Videos, it gives us home gamer welders the extra insight of a true pro and a better chance of doing a more successful repair based on getting to see and hear how a master of his craft look at and take on a repair!!!!!!
@artstudio96733 жыл бұрын
Much respect for you and your fellow tradesmen.
@flat6fever680 Жыл бұрын
It was great to see your video. I'm not a welder but have great respect for your talents using your hands and head ! I've been around aircraft welders for 50 years and always was amazed by their beautiful welds and abilities with metal. It's a dying art but it's great to see it still done by true craftsman as yourself.
@joemoore40273 жыл бұрын
"its not gonna fall off , i hope !" lol
@willitworks3 жыл бұрын
IC Weld is a national treasure, making the country a better place by his skill, work ethic, and morality! He should be raising an apprentice to clone this. (I went to tech school, and thinking back now, I can't imagine learning under this kind of tutelage)
@moikechan3 жыл бұрын
Finally got myself a torch to go with my welder, think of this channel every time I light it 😂👍
@ThatcherKSA3 жыл бұрын
I bought a oxy acetylene setup and i have yet to light it!!! all because of IC Weld. I’m just a dabbler in the metal steel arts but I will get it lit soon and get practicing cutting and doing some welding with it. I’ve read and seen the validation in learning to weld with oxy acetylene as a starter as you get to see the weld pool develop and learn what you are looking at. With the local welding courses still shut down at local CC I just have YT and my neighbor to lean on for feedback. IC Weld is inspiring in his knowledge and skilled field repairs.
@johnkruton97083 жыл бұрын
I like to watch your videos, even though I'm not a welder or mechanic. You have an easy relaxed delivery.
@davemarks73222 жыл бұрын
Great to see a master doing it right. Thanks for taking the time to video and explain. Excellent work.
@MrMrWrench3 жыл бұрын
I love when he says Should be good enough and then bulids as good or better than new.
@Dman1991182 жыл бұрын
Great job ,enjoy how you pick the right points of how everything works and how it should go together, thanks and great videos
@bobchipman91522 жыл бұрын
Amazing workmanship and great explanations along the way. I really enjoy your videos
@brianhdueck33723 жыл бұрын
So well explained: the issues with the backplates, HAZ, rigidity and flexibility, the stress movement... That was exactly how I studied it... Your explanation is worthy of being said in a class! Cheers from Spain.
@samos_sainz3 жыл бұрын
I love your videos. Can tell you're well experienced and take pride in your work. Few and far between any more in the field.
@shawnpaul45613 жыл бұрын
Great explanation as to why patch plates don't work, and I totally agree. great work as always.
@petermccuskey18323 жыл бұрын
Thank you man. Your work and thoughts are like a college course.
@davidmunro14692 жыл бұрын
Nice job as always! Best thing is you show and do it the correct way Top notch work from a top notch guy Thanks!!
@johnmcgreevy7423 жыл бұрын
Glad to see you back, thanks!
@bentaylor83423 жыл бұрын
I love Star Wars too. Good repair on the abused mini.
@oby-16073 жыл бұрын
Thank you for these videos. I agree with the rest of the viewers in that your can-do attitude is infectious. Also, I have learned a good deal: your knowledge for exceeds my teachers. Again, thank you
@davidjohnson42223 жыл бұрын
Another awesome job completed , please keep the video's coming
@gracewthomas3 жыл бұрын
Love the music you add to the videos. It’s chill and kind of classic. Much like your work. Incredible master of your trade. Good work.
@PrairieMechanic3 жыл бұрын
Glad you enjoy it!
@ICWeld3 жыл бұрын
I'll stick with the phrase....a grinder and paint, make me the welder I ain't. Thanks for the video. 👍
@Wrenchen-with-Darren3 жыл бұрын
Always a joy to watch your videos. I didn't know you used a plasma cutter. They are certainly handy machines. Thanks for sharing.
@BruceBoschek3 жыл бұрын
Just watched this one again, I learn something every time! You should do a video on your machines, plasma cutters welders etc. It would be useful to see what size you use for these thick repairs, cuts etc.
@Gyppor Жыл бұрын
It takes knowlege and time to do the job right like you do. The even tempering of metal is so important.
@davidmunro1469 Жыл бұрын
Great job again bud Cheers from Nova Scotia
@francodeiuliis15622 жыл бұрын
14,210 thousand view in only a few hours, really rocking Issac...cheers
@Laura-wc5xt3 жыл бұрын
love what your doing thank you for the explanation, be retiring soon from the ironworker and would like to get some side work like this
@mikedoran67533 жыл бұрын
Move to Texas get ready to do a little bit of all kinds of work. You’ll figure out all kinds of fixes
@dirtfarmer74723 жыл бұрын
Again your analysis of the strength issues is spot on. I would say that in most of the cases of repair to construction machines that you show there is a problem with the strength analysis in the manufacturers design. In this case the blade arms are too close together and would have been better spaced further apart or angled outwards in the first place. Needless to say a flared joint with gusset plates would be an improvement to having the square tubes just welded around at the ends. Anyway, another good lesson from you as always. Keep up the good work.
@marklelohe3754 Жыл бұрын
This guy is awesome ..i do alot of machine and equipment repair in sawmills... Patches have a place for quick repair for up time but when time permits cut it out as far back from any previous repair ....
@shoemonk3 жыл бұрын
Nice repair,love your videos! I'm self taught and still learning! Thanks to guys like you!
@petersmart19993 жыл бұрын
brilliant opening advice!!!!! clear/concise!!!
@rickbrandt95593 жыл бұрын
from watching your videos i had taken for granted how fast you are with an arc gouge vs the plasma. either way great work!
@jr36283 жыл бұрын
Doing Chassis extensions all Patch/Brace Plates had to be plug welded, the Engineer would mark out where, how many and how big on the Plans.
@65cj553 жыл бұрын
Thanks for posting and sharing, i learned something in the first 2 minutes!
@lendavidhart97103 жыл бұрын
Love it Isaac,good job
@tricksfixx83033 жыл бұрын
Thank you for the explanation. I learned something today!!!
@MyJake0073 жыл бұрын
As always a great video of a craftsman at work
@glenlockwood54013 жыл бұрын
Better than new! Thanks for sharing.. I love your videos. and learn a lot.
@DK-vx1zc3 жыл бұрын
Great repair and good information! Thanks!
@Watchyn_Yarwood3 жыл бұрын
You are awesome to watch and I have learned a lot from watching your videos. Keep on making videos and explain what your doing.
@treetopflyersofva23 жыл бұрын
I appreciate that!
@ICWeld3 жыл бұрын
excelente trabajo... quedo mejor que de fabrica ... Saludos desde Corrientes Argentina
@joseserenelli2031 Жыл бұрын
Your not a welder, YOU Sir are a craftsman!!!
@barrb61343 жыл бұрын
One welder to another, Job well done. You make some fine point for anyone doing this rapair, to do a better job.
@davidvaughn65762 жыл бұрын
Master in his trade. Great vid.
@abelcedillo57583 жыл бұрын
It's the little hobs like that, that will keep you in business. Good job
@deant8763 жыл бұрын
I am learning so much watching your channel. I am not a skilled welder by any twisting of the word skilled, but I do learn and am learning. Thank you for good content. God bless you good sir
@rodneysrepurposingrecyclin38212 жыл бұрын
Love the music. Reminds me of a guy back in the 80's.
@huskiesgo59443 жыл бұрын
Love the channel and LEARNing. Thanks So Much....
@70centurian3 жыл бұрын
Thanks for sharing Your skills with us all.
@markdouglas17413 жыл бұрын
I just did a bunch of work on my channel with a 331e. I have a small machine/welding shop and record some of the same content. It's really impressive what you can do with a few tools. Nice work.
@losrussets89453 жыл бұрын
The owners were probably doing something the machine was not designed to do that caused that joint to break in the first place. Nice repair job, after it gets its natural dirt-covered look back on it you would never know it was repaired. Enjoy your videos!
@davidschwartz51273 жыл бұрын
You are a genius Sir!! I love your videos and how you make difficult tasks seem so simple!! Thanks for sharing & greetings from South Africa!
@nevillecartwright72922 жыл бұрын
You definitely fix things right!!! 👍🇺🇸
@scarface-393 жыл бұрын
I try
@ICWeld3 жыл бұрын
You are an honest man.
@jimlong5273 жыл бұрын
IC very nice industry repair and weld , very professional how the repair plates have the original shape to them ...
@petem62913 жыл бұрын
Thanks again for going to the trouble of putting the videos out.
One of the things I really appreciate about these videos is that even though you sometimes deal with horrendous previous repairs, you never say a bad word about it. Just get on with what needs to be done. The mark of a true professional is that their work speaks for itself. No need to bring others down. Cheers.
I’m a engineer and this guy has a better understanding of stresses in a repair joint than some of the “expert engineers” I work with.
Perhaps that's 'cos he have seen and repaired more cracks than all of them together! *smiles
Because he’s in the field. And those guys are like well it works on my computer. Engineers, so smart and yet so wrong so many of the times.
Practical visual deduction built on decades of first hand experience he is pretty spot on repairs especially in the field applications , abused machinery in rocky areas makes him invaluable on recommendations for fixes..🤔👍🤙✌️😔❄️🙏
@@JimBob-tk5zx a computer is one thing practical hands on is of another brand for sure real worker gets my vote any day..🤔👍🤙✌️😔
@@JimBob-tk5zx same thing I experienced in the army. Was trained on theory but field experiences was totally different.
I don't understand why some people leave a thumbs down for IC Weld. The only thing I can think of is either they're envious of his skills or they don't know what professional work looks like?
I betcha most of them are accidental
It could also be people who see this kn their recommendations, and dont want it to be. So they dislike it; that way it wont come up again.
The real thing that makes you good is your lack of ego. You just know that your work speaks for itself. I have learned a lot from you.
Thank you.
Your videos are my favorites on here. I like how patient and humble you are with your repair work. The good vibe rubs off on me and travels with me to work. Thank you for sharing your time with us.
Thanks for explaining in plain english most of the problems with patch plates. Spot on every bit. Thanks for sharing ... again.
low key guy I ain't never seen upset by any welding situation. that's from years in the field, liking what he's doing and making it his business to keep up with advancements in the trade. the man deserves all the success he has. love watchin the guy at his craft.
Thank you for the kind words. I rarely get surprised anymore, hehe. I've seen my share of broken things in the past 30yrs,
I C Weld = Clicking the "thumbs up" even when you just started to watch his video.
Yuuuup
yup me too!
Howd you know
I'm trying to make similar content on my youtube channel. I think that you may find some entertainment in my content. I think the work this guy does is awesome, especially for a small, homebrew shop, exactly like the one I work out of. I plan on releasing many videos to come on my repairs.
How to tell if a video is good if you havent seen it? 😐
I love your description in the beginning on 'bush fixes'. Never judge someone's poor quality work if you weren't there to see what happened. In the real world sometimes you have to work with what you got, even when it's poor materials, lack of proper tools, limited skills, and a timetable. So many so called 'professionals' don't appreciate real world situations that result in the crap you end up fixing properly. You clearly do. Bravo. And props to the customer who was willing to pay you to fix it properly vs insist you patch up the broken welds.
I try and never criticize anyone's efforts. Just as you mentioned, you never know the situation they were in to keep the machine running.
you're the rare combination of engineer and fabricator. lots are good at one or the other but the really talented are good at both.
I truly appreciate your humor and humility. You are a genius and a gentleman.
You sir are my hero. Very skilled. My favorite part about you is that are HUMBLE! You're very good at what you do my friend.
Thank you so much
Was also going to mention the fact that a repair that looks like stock can usually translate to a higher resale price down the road. I bet a seller can make back every penny they pay you to do the super awesome job that you do. Many thanks for sharing you knowledge!
You are a professional man, love how softly spoken you are and nothing ever seems to be a problem for you, you are an inspiration for welders and men everywhere.
Heat affected zone will get you every time. Your approach to repair speaks to your years of practical first hand experience. Excellent job on all your repairs. Glad the Miller Equipment serves you well!
I love your rather dry self- depricating sense of humor when describing your skill level.
Mad respect for the way you handle the differing opinions on how to do these repairs.
Your absolutely right about the patchplates. Most often there occurs a new break just next to the pplate.
Totally agree. Seen it many times. Not that I’m right to do this. But I usually try to only stitch the patch plates on if I can. Roughly a one inch weld and a one inch gap - - - - - seems to keep it from cracking more. I dunno why. Less heat maybe. Also like that if one of my weds crack it usually only cracks that one weld and doesn’t propagate across the whole part.
Seems to help if you make the patch triangular or diamond shaped so that the stress riser doesn't go straight across whatever your fixing.
@@Mad.Man.Marine like drilling a hole a the end of a crack. Doesn't have material for the crack to follow threw
@@Mad.Man.Marine I agree stress is less memories of practice plates beads heat curls it up same direction of heat less stress more strength and relieve spots kinda built in stress relief zones works on sheet metal spot welds. Ears could be 1" sléeved welded in and pinned both sides ,not much abuse unlesspushing big boulders around Texas is famous for in,that neck of the woods., 🤔🙏👍😊❄️🤙✌️
Fish plates. Round corners or tapered. The stress/strain increases with sharp transitions. I agree you can’t make it better fish plating everywhere all the time, sometimes just fix the crack and leave it that way is better. Depends on the job
I learn from every video you do. Appreciate ya takin the time to do it.
He is good at his work. I weld and repair also. What I like about his videos he is not constantly talking.
To the casual observer it's hard to understand the EXTREME pressure you can be under to get a machine back in the field. Having that machine can make or break meeting a construction deadline. So ripping things apart like this and getting it back together is a testament to the skill and experience required. Most customers draw the line somewhere of where to stop a repair, and it's usually based on whether they know they can still make money with it as it is and the time that the machine is out of production. It's a tough business.
I go two thumbs up for the idea dealing problems at the root! It’s goes like someone started a lie and would follow a thousands lies to back it up! Remove the problem and start afresh, like here, would solve the problem and more importantly stops future problems coming! That’s the best solution! Well done!
* go with two thumbs..
The reason why some people give a thumbs down is because they think they know better. I’m retired and worked with many welders but this guy is king 🤴
I love the casual competence in all of IC Weld's vids. It's obvious to him at all times what needs to be done.
Thanks for letting us in your shop.
I love watching your repairs. I am an amateur welder , i like making home projects or doing bodywork. Welding fascinates me.
I welded farm equipment all day to help prepare for the growing season up north here near Chicago. I coma home, had dinner, and now I am watching you weld up heavy equipment. You do good work! God bless and have fun!
I absolutely love your work!!, I’ve been telling guys for decades that the more heat you put into those parts make the area weaker and not stronger. Metallurgy 101. Not a lot of guys even know what metallurgy is. Keep up the great work!!!
Thank you for all you show us Isaac! Im in welding school at the moment and your videos really help me learn that little bit extra about the field. Before i would look at a crack and kinda wonder how the heck to get in there and fix it. Now i can say i almost feel confident enough to touch a backhoe repair. We need more men like you out there.
Just subscribed!! When you explained your experiences with the plates used in the previous repair, that was a piece of information I always wondered about, and my thoughts were the same as your experience. Watching your videos makes me a better welder, and I thank you for it.
Looks like they've been grabbing the blade when they were digging. I think that's how they broke it. Common sense matters!! Welders matters!! Great job Issac!!! " Flash" in Tennessee
Probably explains the sloppy pin holes too. Lots of up/down on the same axis with the full weight of the machine.
Great job, IC. That was a great explanation about using plates on flat breaks. Your explanation about creating weak points by over building others makes a lot of sense. Love your work!
Glad it was helpful!
Cracks are caused by cold working embrittlement, which could have been prevented by heat treatment before the crack began. Making the area stronger will shift the cold working to the immediately adjoining area.
Great job love watching a professional work and explaining why and how he does what he does. THANKS will be waiting for the next one
Appreciate what you do; You keep the wheels turning for the rest of us who don't even realise that things go wrong. Thanks.
Watching you has made me a better welder I can say and a better outlook on repairs. Thank you for your vids and hard work
Great explanation of the patch plate repair. I'm trying to understand preheating and over heating. Positive attitude is much appreciated as well. Thanks!
Pre heating. When u start a weld. Yr introducing heat The welding to cold parent metal which isn’t ideal. If you pre heat to say 100 degrees and then start weld. You get far better penetration and far deeper into the parent metal. Thereby creating a stronger weld Post heating is a stress relief technique. Once you finished welding. By post heating. U on a molecular level. Reposition the metal particles and they realign themselves evenly. And thus. Creating and spreading stress if any. More evenly throughout the parent metal the weld deposit and the heat affected zone which is found either side of the weld on the parent metal Hope it makes sense
Hello my friend greatly love your videos please keep sending them I'm watching from Alabama
Speaking from an old school/old fart point of view, I’m right with you on your mig comment! I still prefer 7018 & 6010 stick over solid wire mig, but if you ever have the chance to try dual shielded flux core, I think you’ll love it! I ran it for years with Co2 shielding, .045”, and it’s great in all positions on everything including thick plate! Had to test (x-ray) several times in 2G, 3G & 4G - 3/4” plate to AWS D15.1 standard, and never had any issues! Of course it wouldn’t be the thing to use for field repairs. Also liked that you replaced the whole piece of square tubing instead of stitching it back together! Gives a much stronger, better looking result!
I've been meaning to try dual shield. I just might try a roll one day.
@@ICWeld .045”. 25.5 volts & 265 to 300 inches/minute wire speed, CO2 at 50. You will love it for in shop projects! Much nicer than straight flux cored. Stay well!
Nice video 👍I don’t even weld, I work in IT, but I find this so interesting .
Same here...cloud engineer...enjoying welding video
Same day turnaround ,his concerns were the loose ears on base , quick fix was a no go, on washer plates, run n gun job probably didn't have longer pins to utilize fix ,nice work as usual from Issac , good clean ground helps
Helps flux core unless base was just cruddy see you were fighting to get flow on puddle arc blow w/.040 maybe contacts on trigger carbon marked.,🤔✌️🤙🙏😊😊👍❄️😔
That's cool that you tech nerds have an interest in these things. Might put some of these pointers into your line of work some how some way.. *cheers
@@Trey4x4 Shows that smart people regardless of their trade recognize greatness in other peoples trade. Many trades i.e. Doctors, lawyers, engineers, teachers delude themselves into thinking I am so smart because my education bla bla...but the great people in any trade know greatness when they see it and they tend to be humble because they can be in aw and respect other peoples greatness.........love this channel and the man!!!!
Bad pins and bushings led to flexing and broken welds. This excellent repair will be undermined by the sloppy bushings. You did your best repairing the machine and offered excellent advice to your customer. That is worth the money.
IC you da man. Just starting to teach myself to weld, for hobby only and luv watching your vids for info. You are so down to earth and humble. The world needs more peeps like you👍 Keep the vids coming.
Most projects are so intriguing. Quite an artist with the torch and gun. Low key humble guy with an abundance of talent and an educated eye. Love watching educated hands work. IC Weld, cheers!!
I can hold my own with minor stuff. You can hold everyone’s. You’re an artist Subscribed
I love how not only are you a master welder but the way you explain the how and why the way you make the repairs! For example pointing out that if you beef up a weak point with a gusset plate it will just transfer the weak spot to the next weakest point. Most of us know that you don't replace a shear pin with a stronger part in order to stop breaking shear pins, you point out that it is the same with other repairs that are not as obvious! You also explain some of the other issues and complexities that the weld or repair introduce to the the equipment. I can weld ( a little) and I have an engineering degree, you have skill, knowledge, understanding of all the variables and most important experience!!!!!! Thank you so much for your Videos, it gives us home gamer welders the extra insight of a true pro and a better chance of doing a more successful repair based on getting to see and hear how a master of his craft look at and take on a repair!!!!!!
Much respect for you and your fellow tradesmen.
It was great to see your video. I'm not a welder but have great respect for your talents using your hands and head ! I've been around aircraft welders for 50 years and always was amazed by their beautiful welds and abilities with metal. It's a dying art but it's great to see it still done by true craftsman as yourself.
"its not gonna fall off , i hope !" lol
IC Weld is a national treasure, making the country a better place by his skill, work ethic, and morality! He should be raising an apprentice to clone this. (I went to tech school, and thinking back now, I can't imagine learning under this kind of tutelage)
Finally got myself a torch to go with my welder, think of this channel every time I light it 😂👍
I bought a oxy acetylene setup and i have yet to light it!!! all because of IC Weld. I’m just a dabbler in the metal steel arts but I will get it lit soon and get practicing cutting and doing some welding with it. I’ve read and seen the validation in learning to weld with oxy acetylene as a starter as you get to see the weld pool develop and learn what you are looking at. With the local welding courses still shut down at local CC I just have YT and my neighbor to lean on for feedback. IC Weld is inspiring in his knowledge and skilled field repairs.
I like to watch your videos, even though I'm not a welder or mechanic. You have an easy relaxed delivery.
Great to see a master doing it right. Thanks for taking the time to video and explain. Excellent work.
I love when he says Should be good enough and then bulids as good or better than new.
Great job ,enjoy how you pick the right points of how everything works and how it should go together, thanks and great videos
Amazing workmanship and great explanations along the way. I really enjoy your videos
So well explained: the issues with the backplates, HAZ, rigidity and flexibility, the stress movement... That was exactly how I studied it... Your explanation is worthy of being said in a class! Cheers from Spain.
I love your videos. Can tell you're well experienced and take pride in your work. Few and far between any more in the field.
Great explanation as to why patch plates don't work, and I totally agree. great work as always.
Thank you man. Your work and thoughts are like a college course.
Nice job as always! Best thing is you show and do it the correct way Top notch work from a top notch guy Thanks!!
Glad to see you back, thanks!
I love Star Wars too. Good repair on the abused mini.
Thank you for these videos. I agree with the rest of the viewers in that your can-do attitude is infectious. Also, I have learned a good deal: your knowledge for exceeds my teachers. Again, thank you
Another awesome job completed , please keep the video's coming
Love the music you add to the videos. It’s chill and kind of classic. Much like your work. Incredible master of your trade. Good work.
Glad you enjoy it!
I'll stick with the phrase....a grinder and paint, make me the welder I ain't. Thanks for the video. 👍
Always a joy to watch your videos. I didn't know you used a plasma cutter. They are certainly handy machines. Thanks for sharing.
Just watched this one again, I learn something every time! You should do a video on your machines, plasma cutters welders etc. It would be useful to see what size you use for these thick repairs, cuts etc.
It takes knowlege and time to do the job right like you do. The even tempering of metal is so important.
Great job again bud Cheers from Nova Scotia
14,210 thousand view in only a few hours, really rocking Issac...cheers
love what your doing thank you for the explanation, be retiring soon from the ironworker and would like to get some side work like this
Move to Texas get ready to do a little bit of all kinds of work. You’ll figure out all kinds of fixes
Again your analysis of the strength issues is spot on. I would say that in most of the cases of repair to construction machines that you show there is a problem with the strength analysis in the manufacturers design. In this case the blade arms are too close together and would have been better spaced further apart or angled outwards in the first place. Needless to say a flared joint with gusset plates would be an improvement to having the square tubes just welded around at the ends. Anyway, another good lesson from you as always. Keep up the good work.
This guy is awesome ..i do alot of machine and equipment repair in sawmills... Patches have a place for quick repair for up time but when time permits cut it out as far back from any previous repair ....
Nice repair,love your videos! I'm self taught and still learning! Thanks to guys like you!
brilliant opening advice!!!!! clear/concise!!!
from watching your videos i had taken for granted how fast you are with an arc gouge vs the plasma. either way great work!
Doing Chassis extensions all Patch/Brace Plates had to be plug welded, the Engineer would mark out where, how many and how big on the Plans.
Thanks for posting and sharing, i learned something in the first 2 minutes!
Love it Isaac,good job
Thank you for the explanation. I learned something today!!!
As always a great video of a craftsman at work
Better than new! Thanks for sharing.. I love your videos. and learn a lot.
Great repair and good information! Thanks!
You are awesome to watch and I have learned a lot from watching your videos. Keep on making videos and explain what your doing.
I appreciate that!
excelente trabajo... quedo mejor que de fabrica ... Saludos desde Corrientes Argentina
Your not a welder, YOU Sir are a craftsman!!!
One welder to another, Job well done. You make some fine point for anyone doing this rapair, to do a better job.
Master in his trade. Great vid.
It's the little hobs like that, that will keep you in business. Good job
I am learning so much watching your channel. I am not a skilled welder by any twisting of the word skilled, but I do learn and am learning. Thank you for good content. God bless you good sir
Love the music. Reminds me of a guy back in the 80's.
Love the channel and LEARNing. Thanks So Much....
Thanks for sharing Your skills with us all.
I just did a bunch of work on my channel with a 331e. I have a small machine/welding shop and record some of the same content. It's really impressive what you can do with a few tools. Nice work.
The owners were probably doing something the machine was not designed to do that caused that joint to break in the first place. Nice repair job, after it gets its natural dirt-covered look back on it you would never know it was repaired. Enjoy your videos!
You are a genius Sir!! I love your videos and how you make difficult tasks seem so simple!! Thanks for sharing & greetings from South Africa!
You definitely fix things right!!! 👍🇺🇸
I try
You are an honest man.
IC very nice industry repair and weld , very professional how the repair plates have the original shape to them ...
Thanks again for going to the trouble of putting the videos out.