A lot of time has passed since we bought a Powder Coating Machine, we have finally decided to make an oven to bake this powder.
The oven has 2m x 1m x 1m dimensions. We used 12 sheet metals 2x 1E 2mm.
This oven is warmed by three elements, which are located at the bottom of the oven, and each one is 3KW. In this way, we created an oven of 9KW.
► Read More: bit.ly/3se6ORF
► Get the plan: bit.ly/43iiYqS
► Linktree: linktr.ee/makeitextreme
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts
tipp: When you apply the powder to the workpiece you must wearing a respirator Mask. Or you build a Metal Construktion with fume extractor for applying the Powder.
I was thinking the same thing! They should be wearing a respirator mask when powder coating anything in the shop! WAKE UP CALL!!!!!!!!!!!!!!
Yeah, it looks really unhealthy!
Thank you for the feedback and concern! Some times we need not to ignore those things. Its an open space but we should be always cautious. Do you agree?
😂 amatures.. They don't wear anything because they are Pro's! also channel call's Extreme so everything is perfect 👍 Thanks for your work.
Yes!!! This!! I worked in powder coating for several years and I can tell you that you most definitely want to ALWAYS wear a respirator or at least a mask of some sort to filter out the particles. You will regret not wearing one after just a few times of spraying that coating without one. Makes your lungs feel like they are full of cement and will be coughing up a funky, nasty rainbow of garbage for days.
Superb job as always. Love all the finer details going into this. Lots of thought and rethinking that goes on that is overlooked on these amazing videos. 200 degrees Celsius is definitely plenty hot. Bravo 👏
This is INCREDIBLE! The razor sharp focus, the jump cuts and the slow pans all keep my interest while I watch you create really useful things! OK, not gonna lie, I was dancing while I watched most of this. Incredibly entertaining! You just earned another subscriber!
That was slick at the end with the pizza... love it!!! 😂😂😂 As always, love how you come up with ways to do projects "in house" like this for parts!! ❤❤❤
I sure hope they didn't eat that pizza. Powder coating ovens emit toxic chemicals after initial use.
Glad you liked it!!
Great build, thanks for demoing the air flow.
I have say that you have the most incredible skills for fabricating and then machining it into life!! I watch everything you do when it comes to your machine work, and it’s incredible and also not easy. I’m sure you made some mistakes and edited it out but that’s okay because in the end it all went together perfectly and worked perfectly!! God Bless my friend, JUST KEEP ON DOING WHAT YOU DO!!!
Great job making the oven, that's a lot of work! It is up to you but it would also be worth making a water table for the plasma CNC, and a spray booth, to reduce smoke and dust in the workshop
Absolutely not. Fumes are the best.
@@anttihuttula6547Yooo... Fume gang!
I clicked on this video before I read the caption, thought we were build a bullet proof safe room. Incredible job and probably a much higher quality oven setup then you could ever order off of the internet. Sick video
Like always great project and high quality build the oven looks awesome 🔥
You Guys are among the Best!! You are in MY Top 5!! 🥰🤩⭐⭐⭐⭐⭐
Very cool. Great work on an interesting project. Powder coating is a superior way to colorize and protect parts.
Now you can make a powder room for the poder aplying and with an exterior exaust...good job
Yes next production powder coating booth 😊
Brilliant work, guys! It looks menacing!!! 😃 Stay safe there with your families! 🖖😊
Awesome build. Excellent video. Nice work!! 🤘😎
Another fantastic video and build!
Great Job as usual Fellas!
I love good craftsmanship .... Great job brothers
ALWAYS ONE OF THE BEST.
Μπράβο ρε μάγκες μπράβο. Τρομερή ιδέα τρομερή πατέντα καταπληκτικοί. Από Χαλκιδική Νέο Μαρμαρά
Awesome work man!!
A super huge and massive Project !! Really Awesome. ;- )
you guys are amazing! long time fan of your content. But I want to give a special shout out to your film crew, who are great))
Thank you for your great comments!
well, it won't be falling apart any time soon! 😄 very nice build, amazing video.
Guys like you or DonnDIY or MadeInPoland are completely crazy, but completely necessary !! So inspiring !!!👍👍👍
You have made quite the dream shop sir! It is fun watching you grow in your projects and abilities!
Amazing scale and quality of the construction. And the ingenious simplicity of some solutions. Nice to watch. :) Cheers.
Thank you very much!
Nice job as always. We shared this video on our homemade tools forum this week 😎
Next episode is Make it Extreme Powder Coating booth because powder gets into everything, lol... Amazing work!
I would put on the middle instead of silly light a slow rotating hook -so that you can hook the parts and cure them better from all sides.
A great video and a really great oven too well done, I will have a cuppa and watch your video again very interesting.
I can smell that the "Make it Extreme" welding table will be made somewhere in the future. You've made so many shop tools that I feel the proper welding table is inevitable.
They built that nice sisors lift table Ages ago, but it was outside.
Now thats what i call an easy bake oven!
You guys are awesome!
The only thing the oven lacks is a timer with a buzzer and/or warning light to tell you the baking time is up.
Really really impressive and really really cool 🤩👍
profissionais de primeiríssima linha! Parabéns.
Just a amazing 😍 painting 🖌️ to use
Great video!!!
Awesome build 😁👍
WOW, BUDDY, THIS IS STUPENDOUS.😃😃😃😃
Great job! One thing tho. You need to replace the bearins in your mills headstock sooner than later. They sound like the are on their last legs!
Every time amazing.
You finally listened to my suggestion !
Desde España os sigo me encanta vuestros trabajos eres una máquina ojalá saber tanto como vosotros
Amazing work❤
Awesome!
Wow i was waiting on you to post
Entertaining and educational thanks
Φίλε είσαι ο καλύτερος!!!!
Magnifique, merci pour TOI amicci
amazing jod!!! perfect!!!
in the minute 18... how did you guys make a powder hoven look that epic hahahah can't believe it ❤ great job! love the channel
Thank you for your good comments! What did you like most of the looks? :)
@@MakeitExtreme honestly I like evening. This is one of my favourite creators channels :) hope to see more of that car soon!
It can double as a nuclear bunker if needed.
very cool!
*Well done.* Whether complex or basic, your designs/builds always turn out fantastic. I'm curious about 2 things: 1] is the temp level uniform from top to bottom using just one element-[does it even matter at such low temps]? 2] is it better to hang parts at the top when you only have a few parts or is closer to the element at the bottom better?
They made forced air circulation from top to bottom and heaters at very bottom of the oven so the temperature will be even at all volume.
@@zlozlo3935 // The circulating fan design made sense to me, but I was still curious as to its effectiveness in such a large area. Thanks.
The best! Big like.
Отличная работа 👍👍
Great job as always Guys :) Thanks for always sharing with us!💖👍😎JP
Thanks for watching! :)
@@MakeitExtreme Your very welcome Guys Have a awesome week😎
Excellent travail j adore 😀
How many time took you build this oven?? Great project btw
keep em coming 🤙🤙🤙
Hello mister beautifully made
Like bro! 👍😎
Very workfull nice work
Very professional looking work. Impressive.
hi guys, great job! THANKS . little tip, your riveter is not properly adjusted. the rivet should break in one go and not in two as seen in the video. you must disassemble the nose and move the adjustment screw back 1 or 2 mm.
Είστε ωραίοι.👏
May I ask, what paint did you use? Keep up the great job 👍
I thoroughly enjoy the music nice power coat oven 👌
good job. what electronics did you use?
Good lord, this has HOW many rivets?! Nice work gentlemen.
С таким уровнем планирования и качества выполнения работ он составит конкуренцию корпорациям типа Росатом🇷🇺, Рейнметалл🇩🇪 и УралВагонЗавод🇷🇺🤔😳👍👏
Very nice oven build. It must weigh a couple ton! LOL! Glad I found your channel many years ago because it's very interesting and has great interesting builds. You need to wear a mask and safety glasses (not just on the top of your head) when powder coating. Just FYI. Thank for the video.
Great job, but howd you made the temperature controller?
what can you tell me about the circulating fan set up? looking to add this to my current oven. curios what heating elements you used as well.
Guys, very cool project! For the next one you should consider making a spray booth, be careful about breathing in that powder, it will screw up your lungs bad!
Fantastico 👍
almost a bunker, great job
I also built a large vertical powder coat oven. But I put my heating elements recessed into pockets on the rear wall, because I scavenged from a double oven, and that's how it could fit. But I didn't think to add a blower fan. I'm wondering if I should add it now.
It will make it a convection oven and help keep the temp stable in the oven.
It would be a nice and helpful addition. What do you think? ;)
@@MakeitExtreme I'm realizing you are sucking the air through the holes, and not blowing. Yes, this makes sense to circulate the heat FROM the top to the bottom. I think this might help keep things at the very top of the oven curing too fast or over curing.
Incredible work. How many watts do the elements?
Hola amigos EXCELENTE su trabajo, pero deberían usar máscaras, y fabriquen el aspirador es otra cabina donde puedes pintar, saludos desde Argentina Corrientes 👍🏻🇦🇷👏👏😊
👍👍👍 красавчики !!!
I might have missed it, if you actually ever did explain it. But can you make a video explaining what the squiggly lines of your Make it Extreme logo are and what they stand for? Thanks much, I enjoy your content and am subscribed and always "LIKE" every video.
Very cool build! The separating shelf is a nice touch! But WHY ARE YOU NOT WEARING A RESPIRATOR when you spread that powder in the whole shop?! Be safe!
18:42 me: "Im feeling this green theme in the garage. no one goes with green. I wonder what inspired his color choice." 18:44 me: **squints eyes glancing over to the background** nope that's not it. 18:55 me: ahh THERE IT IS.
how long does the oven take to reach 200? where did you get the heater element? tks great work !!
Rivets versus welding -- how do you choose when you use one or the other? Sometimes you could weld, but use rivets (8:24). Other times, it's the inverse (15:20). Thanks!
I can't say for sure, but my guess is that rivets allow a little bit of movement, handy for parts that expand from heating.
@@bmay8818 I agree with that and it would be particularly important with this build and application. Cracks could form if there is no "give" for expansion and contraction.
@@bmay8818And if they want to replace the insulation one day because it is rotting away ( is that a thing? what even is this stuff?) they just have to drill out a bunch of rivets instead of sawing out the whole panel
@@warrangota8721 I don't see how it could "rot away", since it's not only indoors, but in an oven. It looks like mineral wool, which is basically fiberglass but made from rocks instead of glass.
How fast does the oven get to temprature? Thank you in advance!
Master of youtube ¡¡¡¡
Отличная работа, можно и баранину запеч
Какая б😊льшая духовка. 😊
Out of what material are the insulation mats you used? :)
I've designed and built two PC ovens, and yours incorporates some good ideas from both, but there is no need for a window at all, you put things in and you take them out later, nothing to see and heat leak point, the door should have a handle really but I'll let that slide, insulation was a bit over the top, not sure painting the inside was a good idea, I brought ours up to temp and powder coated it with hi-temp powder, not issues with it flaking and dropping onto coated parts, best powder is polyurethane NOT EPOXY and you must wear a mask as it is carcinogenic, for a better finish by far and to get around faraday cage problems on complicated shaped parts it's better to pre-heat parts before coating, you just need to ensure you don't overcoat them, especially wheels if pre heated as the powder can flow to the bottom and throw the balance way off, your wheels didn't look as if they had coated very well where the center meets the rims, pre-heat to avoid those as recoating is a real pain Another design uses oven elements on the back wall in a circular fashion with a low-speed fan in the center, with a cover over them. our ovens were about six times the size of that at least and we had no hot or cold spots worth mentioning, great build quality though as usual.
22:00Use protección respiratoria y un ambiente ventilado, la pintura en polvo también es tóxica‼️
Whats the wattage of your heating element? If I may ask
What is the weight of this amazing oven?
Wow! You guys need a down draft exhaust system for that plasma table.
Now you need an Extreme spray booth/room with a filter or exuast and some spray masks. Nice job as always.
next time on Make It Extreme powder coating booth
What type of paint did you use ?