The Art of Traditional Japanese Wood Joinery 日本伝統の技術『仕口・継手』
At the end of the 12th century, fine woodworking skills and knowledge were brought into Japan from China. Over time, these joinery skills were refined and passed down, resulting in the fine wood joineries Japan is known for.
Here are some examples of traditional wood joineries which are still used today.
The book I referred to when marking out the joinery:
The Complete Japanese Joinery
www.amazon.com/Complete-Japan...
One of my favourite joinery book:
木組み・継手と組手の技法
www.amazon.co.jp/%E6%9C%A8%E7...
For more photos, check out my Instagram:
/ dylaniwakuni
Recommended books on Japanese woodworking, sharpening stones and measuring tools:
www.amazon.com/shop/dylaniwakuni
(affiliate link)
*As an Amazon Associate I earn from qualifying purchases
Free Sketch Up 3D joinery models:
www.dropbox.com/sh/ethawktkhz...
A cup of coffee is always greatly appreciated :)
www.buymeacoffee.com/dylaniwa...
#japanesewoodworking #traditionaljoineries #asmr #handtools #woodworking #woodjoinery #finewoodworking
For those interested in learning more or wanting to make joineries, I've listed some of my recommended books and resources in the description box. Cheers and happy weekends!
Thank you so much for posting. Can you please share what is the type of wood that you use generally? I can see 2 different kinds of wood species being used in most of the joints. Namaste.
For these, I used what I had available. Mostly Birch and Walnut
@@ashishwadekar6395 1ㅣ
@@dylaniwakuni Thank you so much!
Los ensambles te quedaron excelentes
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzhead.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Meanwhile, I'm proud when i can just get two 45 miter joints to go together.
Two? Man, you must be good
I feel your pain man. Small victories.
Miter? Still have to do it by hand
Bwahahaha me too
🤣
日本は湿気が多く金属の釘を使うと錆びたり、また地震が多いため木材を一体化し強化できる「継手」の技術が生まれました。また、木が腐ったところだけを切り取ってそこを新しい木材で修復できるとてもエコな技法でもあります。しかしとても難しい技術のため、今は廃れ始めているのが現状です。 In Japan, the humidity is high and metal nails can rust, and there are many earthquakes, so the technology of "継手" that can integrate and strengthen wood has been born. It is also a very ecological technique that allows you to cut out only the rotten wood and repair it with new wood. However, because it is a very difficult technology, it is now becoming obsolete.
I didn’t know I needed this content in my life but I’m sure glad I found it!
You and me both
The perfection in those cuts must be laser spot on for them to line up the way they do. Just amazing.
Thank you for keeping this craft alive and for your recommendations on how to educate ourselves! Definitely will keep watching this channel!
Happy to hear that! Thank you! 😊
I love working with wood, I've never seen joinery quite like this. No clue requires because the joins are so tight. The shape of the joins are so precise and even with expanding and contracting they won't move. This is why some of the oldest structures in Japan are still standing. I bet these were cut by hand with a Japanese saw I have one for fine cutting you get such a precise and accurate join.
My house is quite old and I admired the technique used in joining blocks of woods here. Learned today that they are called Kanawa Tsugi. Thanks KZhead for recommending this video.
I'd love to see Ron Swanson taking a class in Japanese Wood joinery.
I "wood" watch that.
I swear...my dream is to move to Japan, find a nice place in the mountains by a beautiful lake or river, and build a house using all of these techniques so I can spend my life in peace and harmony.
That's a great dream! Houses/land in the country side are cheap too!
@@dylaniwakuni Thanks...now if I can only find a way to make it happen. I had some pretty interesting ideas for a house too. Ground floor laid out to surround and enclose a lovely garden with a pond while still being open air in the middle, and possibly still including a second floor above it while continuing to allow natural light in. It was an idea I came up with when I was 20. :)
@@technewsfortechnoobs That's cool and a great purpose. But remember, wherever you go, there you are. Peace is not a location but a state of being. Start bringing it in now and you can take it with you when you go to Japan.
well you don't have to do it in Japan. it would be much simpler not to.
@@GhostofTradition that is kinda the idea, you have to make your dreams so difficult you never have to act upon them because of it. ;) Because our dreams are at their best when they stay just dreams.
That's how we've been coexisting with earthquakes.
I've tried to find a video to actually showcase the joints and stuff used for those ancient ass earthquake resistant buildings, nail-less building just sounds kinda rad and i wanna see more
@@Crosshill kzhead.info/sun/qKtsZ8uJiqiomWw/bejne.html Any metal material wasn't used to build this. The whole tower is a shock absorber that was designed to last more than 400 years.
@@Crosshill This is super late but, try looking up the architecture of Kiyomizu-dera, specifically the 43ft-tall stage area. The whole damn thing was built without using a single nail, and it's still intact. I got to go there before on a study tour and it gave me chills just looking at it, whether standing on the stage itself or looking up from ground level.
Simple yet complex and beautiful
Stunningly beautiful! Thank you for being kind enough to share your skill
Such beautiful craftsmanship! Japanese attention to detail always makes things better!
Thanks for your generous sharing of information, this is incredible.
Thats a machining level of precision, a really good materials and superb technique could do. Perfection
Some of the finest woodwork in the world... Thanks!
Thanks for keeping the skill alive!
😊🙌
Outstanding craftsmanship! Thank you!
I have always loved technical marquetry using a round corner table with various colors of wood embedded in beautiful designs with mother-of-pearls.
Amazing! The four sides one blew my Mind.
All of these could have had a twenty minute video each, they are stunning. Great work.
Amazing knowledge and art 👍
Fascinating work! Love it.
The Japanese are just next-level Masters!
The Japanese culture are next level advance. I mean they invented the Katana and Ju-Jitsu a few hundred of years ago?!
Amazing and very therapeutic to observe . Thank you .
Wonderful work, so impressed with this
Thank you for all the videos, Dylan. Have finished watching them all. Big thumbs up and subbed.
Happy to hear that! Thank you 😊
I'm a metrologist and to think all of this perfect fitting was created long before concepts like GD&T really blows my mind.
I love this kind of work! Congrats.
No nails or glue required, just accurate measurement.
“Just”...
Perfect timing! Was just looking to attempt some of these for my kids bedroom set.
That's great! Cheers! 🙌
The skill here is beyond belief , i take my hat off to craftsman like this , mesmerising
先人の職人さんが作られた継手は素晴らしいものですが、現代の職人さんが新しく作られた継手が存在するのか?も興味があります。
The different tsugi brought me the first time to Japan wanted to see the joinery in the shrines , castles and tempels. Just love it ☺️☺️🇯🇵🇯🇵
Very nice, Japanese architecture is some of the worlds most beautiful and intricate. Those joints require some very precise measurements and cutting ability. Not to mention some very sharp and well taken care of tools.
Insane precision..so satisfying to watch!
Да, истинное мастерство! Спасибо, Вам Мастера, и доброго здоровья!
This skill is amazing! No nails, staples or glue is used.
Amazing craftsmanship!
天才です。
Nice little teaser to start the weekend. Arigato!
Cheers! 🙌
I am humbled. Absolutely incredible!
I was searching for a good way to attach my 3d printed plates together. I will use the first one, thanks
I watched this for the first time like 2 hours ago & have been binge watching your videos ever since anyway an hour ago I *saw* you putting the impossible joint together but I didn't really understand what I was seeing, I just came back to this & rewatched & it's amazing how comprehension can go from 0 to 50% like that so fast. Now I really want to try this; seriously considering buying some tools. Your channel is magical.
Happy to hear you’ve been enjoying my channel! 😊🙌
that's so impressive i aspire to be this good someday, but right now i struggle with making the boards flat. its great to see an expert at work.
Wow such craftsmanship
Beautiful joinery.
You are very very skilled.
The scarf joint looks a beautiful piece of work. Really strong joint too.
Yes, it's a very solid joint!
This is exactly the type of joinery I really want to get into. Still got to get my head wrapped around on the layouts first. Great video, cheers :)
Happy to hear that! Cheers! ☺️🙌
I wish I were that good.So, I must practice a lot more I guess. Thanks for sharing this video.
I am so extremely fascinated about this .... wanna learn.
This guy is literally the definition of seamless
Incredible engenuity and effectiveness. Wow!
Just wonderful!
The Japanese really can make anything an art form.
Well said. I thought about paper. Cultures everywhere used it yet only one turned it into a crane with just folds.
I'm going to have to start a new category in my collections, having watched this. Some of these are extremely complex looking, but they're all beautiful in one way or another. I found this vid very relaxing and an overall absolute pleasure to watch. Thanks for posting.
the japanese carpenters are the best on the World !!!👍👍👍🙏🙏🙏
The dislikes are from people who are envious of a person who's more skilled than them
My hands has been unstable since small lol I can't even do woodworking school project then, let alone take selfies today. I can't get jealous of precise mathematical engineering anymore than beautiful craftsmanship that is in the Japanese roots of creation. Edit: but I didn't dislike the video. I like it, in fact.
継手のなかでも、【金輪継ぎ】を考えた先人の賢才さに、ただ脱帽。【隅留ほぞ差し】は狂奔の結果に考案したかのような継手、人間業なことが見事!
Thank you so much for sharing the files, this will gave me the boost to have a try, I wouldn't go without a map ;-)
Happy to hear that 😊
Que arte. Parabéns
Satisfyng
Great joinery. Talented woodworking. Whenever I make something with tight fits like this, when I drive it together, something always splits.
Thanks
I must learn to become a master of this craft
OMG, what a acuressy tipical work💰👍👌
Didn’t even watch t yet but I KNOW it will be exceptional! Cheers Master
Amazing
Everything they do, they do very well.
OMG! this is so satisfying to watch
This is beautiful
Ari shiguchi is what I’m using for bearers and joists, such a good join.
You just earned another subscriber (me)! The content is so good and refreshing!
Thanks 😊
Amazing. The fit is unreal, like it was machined out of metal by a master
The fastest ‘thumbs up’ I’ve ever given to a video !
That's pretty nice
I'd love to see more on how temples and castles were made. Both may have elements where at least to my untrained eye 6 beams meet (like a pillar with two orthogonal beams supporting a floor and another pillar on top, or that scaffold on which some temples stand at a steep cliff). Also, how can they make such precise joints with such huge beams? You can't just try out all the joints, or?
Sooo beautiful..
absolute perfection
This is pure poetry.
This is incredible..
Wonderful! Time to sharpen my chisels and make ..... something! Thanks for sharing this!
Cheers! 😊🙌
Stunningly beautiful... domo!
wow Great👍
すばらしい!
You should test the strenght of these joint by putting them through different pulling/pushing tests
incredibly smart
The entire world should be made this way sustainably, the trees would be proud.
I have to admit, I am VERY jealous of Mr. Iwakuni. Because.......... all the joints he cuts/demonstrates, he makes look SO darn easy! I know I am just starting out with timber framing in general and, I understand I shouldn't be so hard on myself for the lack of skill as I improve daily. But boy oh boy does that bar he set look HIGH! As an experienced Tool and Die maker/Tool Designer, I have a lot of skill with tools/calculations/drawings and so forth and, I am grateful that much transfers over from cutting steel to cutting wood (as far as general concepts/design/ thought process goes). I have a lot of respect for those who are just starting out, from square one because, there is just so much to learn. But, it IS worth every moment! Thank you very much Mr. Iwakuni for taking the time to teach myself and others. In my book, you are the best of men for sharing all that knowledge with us.
Thank you for the kind comment 😊
Excellent work, and Tang Dynasty says ‘You are Welcome’
For God's sake even the video description gets it wrong,this did not came from the Tang Dynasty just look up any Chinese wood working and you see the difference these kinds of techniques were developing all over the planet, one of the oldest techniques watariago-shiguchi goes back to the Jomon period Before contact with Mainland Asia.
Very cool and satisfying, love the joins from the second half, starting at 1:43 :) Would a person expect any cracking from expansion or contraction of the wood pieces, or two types of wood as you've used in one or more of the joins?
Perfectionist will be happy if they see this
Love the video. I do have a random question. Do you think this skill could be used for making wooden musical instruments?
i was wondering, 0:20 and some other types of tsugi that includes this, does the wooden peg purposely be left attatched? or there were times that this come off after? just came confused even after the one video where you replaced one support with a joinery that looks like that
Muito interessante.
Time to make something using this joints.
Super