KZhead

Making the "Impossible Joint" 四方鎌継

Dylan Iwakuni
2020 ж. 6 Қыр.
7 164 747 Рет қаралды
Жүктеу

Making Shihou Kama Tsugi (four-way goose neck joint). When you first look at it, it can be confusing as this joinery is on all four sides, without a way to be taken apart. But this joinery actually slides diagonally, making this "illusion" possible.
The wood is Walnut and Birch.
For more photos and videos on joineries,
check out my Instagram:
/ dylaniwakuni
Recommended books on Japanese woodworking, sharpening stones and measuring tools:
www.amazon.com/shop/dylaniwakuni
(affiliate link)
*As an Amazon Associate I earn from qualifying purchases
Free Sketch Up 3D joinery models:
www.dropbox.com/sh/ethawktkhz...
A cup of coffee is always greatly appreciated :)
www.buymeacoffee.com/dylaniwa...
#japanesewoodworking #traditionaljoineries #asmr #handtools #woodworking #woodjoinery

Пікірлер

  • after watching this, i was inspired and fixed a broken chair leg with duct tape.

    @adfhgadfsgasdf@adfhgadfsgasdf3 жыл бұрын

    • Too complicated! Instead I watched a video of a guy repairing a chair with duct tape --- was it you?

      @SenselessUsername@SenselessUsername3 жыл бұрын

    • I watched an instructional video on KZhead on fixing a chair with duct tape, then I made an instructional video about fixing a chair with duct tape, and now others can make instructional videos on how to fix a chair with duct tape..

      @irieanimalcare2736@irieanimalcare27363 жыл бұрын

    • @@irieanimalcare2736 Excellent news! I've got beer and crisps, I'll watch them all while sitting on the ground. I'm hoping to acquire a broken chair at some point in the lockdown.

      @SenselessUsername@SenselessUsername3 жыл бұрын

    • Lol

      @TheDrblu@TheDrblu3 жыл бұрын

    • Well, doing something is better than doing nothing.

      @diegovaldes8411@diegovaldes84113 жыл бұрын

  • I had accidentally turn on auto captioning before this video. Whenever chiseling would occur, a caption would say “Applause”. Who am I to argue with that.

    @josephregester7780@josephregester77803 жыл бұрын

    • Underrated comment

      @seraphim7512@seraphim75123 жыл бұрын

    • It works, 😱😵😵👍

      @racingheart92@racingheart923 жыл бұрын

    • I am in the Nobel Committee, and I think I know who wins this year's Nobel in Literature

      @TheDhauladhar@TheDhauladhar3 жыл бұрын

    • 👏👏👏👏👏👏👏

      @bobhall7257@bobhall72573 жыл бұрын

    • Hahaha I am surprised when I saw "Applause " caption.. wtf

      @donnyandrya8068@donnyandrya80683 жыл бұрын

  • My dad is a carpenter and he's always been impressed by Japanese woodworking. I get it now.

    @keenanlarsen1639@keenanlarsen16392 жыл бұрын

  • This is very interesting to me, not to mention very impressive. No intro, no dialogue, just a mind blowing level of precision and commitment to the craft.

    @ryanhass8716@ryanhass871610 ай бұрын

  • I swear i spent 70% of the video admiring how sharp his chisels are.

    @Mr.T-1000@Mr.T-10002 жыл бұрын

    • Japanese steel is top notch shit

      @youngnutsack17@youngnutsack172 жыл бұрын

    • Thank god! I'm not the only one 🙂

      @RAXITH_playz@RAXITH_playz2 жыл бұрын

    • Same here

      @chinmaychinmay7149@chinmaychinmay71492 жыл бұрын

    • My wife used one of mine as a screwdriver when she could find a flathead

      @apcook34@apcook342 жыл бұрын

    • @@apcook34 haha,thats just something to use next time she says she puts up with so much,just be like " says the women who ruins a chisel i have spent and hr sharpening over a screw haha

      @Mr.T-1000@Mr.T-10002 жыл бұрын

  • Making an impossible joint is now legal in 16 states.

    @jesusgaud8@jesusgaud83 жыл бұрын

    • It's 4:20 somewhere.

      @robertinscoe2379@robertinscoe23793 жыл бұрын

    • Was already legal for ages where i live 😊

      @SRADracer@SRADracer3 жыл бұрын

    • 😄😁☘

      @Nadheem721@Nadheem7213 жыл бұрын

    • what

      @a1graa@a1graa3 жыл бұрын

    • Lol!

      @NoCommentAtThisTime@NoCommentAtThisTime3 жыл бұрын

  • Amazing. The use of 'basic' hand tools is stunning - a clear demonstration of craftsmanship. Inspiring !

    @slincolne@slincolne2 жыл бұрын

  • Not the kind of joint I was expecting, but still a solid 10/10 execution.

    @70Se7en@70Se7en2 жыл бұрын

    • Same

      @deinvater6376@deinvater63762 жыл бұрын

    • This was exactly what I thought it would be. Just like in the thumbnail. "Impossible joint" is a magic trick / an illusion. Drugs are for stupid people, nobody should make videos of them. :)

      @siipi6331@siipi63312 жыл бұрын

    • @@siipi6331 haha drugs bad

      @leviathan3630@leviathan36302 жыл бұрын

    • @@leviathan3630 Yes, they are. ;)

      @siipi6331@siipi63312 жыл бұрын

    • Same, but I made one out of rizla and burned it anyway😂✊🤪

      @DungeonTV100@DungeonTV1002 жыл бұрын

  • When I saw impossible joint making, this isn’t exactly what I had in mind

    @zyguy8009@zyguy80092 жыл бұрын

    • I was expecting other kind of joint

      @comida_latina@comida_latina2 жыл бұрын

    • Thats why I clicked lol

      @Kriiken@Kriiken2 жыл бұрын

    • That's the bait

      @sidarigoz@sidarigoz2 жыл бұрын

    • Same here mate

      @Nixons5thterm@Nixons5thterm2 жыл бұрын

    • free the joint. legalize it!

      @mavram@mavram2 жыл бұрын

  • "No joint is impossible" - Bob Marley

    @insanebmxthomas@insanebmxthomas2 жыл бұрын

    • Snoop dogg wants to know your location.

      @Jess-cs8pk@Jess-cs8pk2 жыл бұрын

    • Nice

      @ObamasBirthCertificate@ObamasBirthCertificate2 жыл бұрын

    • brilliant

      @irgendopper8781@irgendopper87812 жыл бұрын

    • RIP the great

      @Preacher_.@Preacher_.2 жыл бұрын

    • My lime just brought this to 420

      @stevendwyer2479@stevendwyer24792 жыл бұрын

  • I was expecting some steam and clamps, not laser chisel precision. Very impressive!

    @RobertBreckenridge13@RobertBreckenridge132 жыл бұрын

    • Steamed clamps

      @fedyx1544@fedyx15442 жыл бұрын

    • @@fedyx1544 An unforgettable furnishing

      @ryanspence5831@ryanspence58312 жыл бұрын

    • Same, though i believe that option would've needed quite some laser chisel precision too.

      @topiuusi-seppa5277@topiuusi-seppa52772 жыл бұрын

    • @@fedyx1544 steamed clamps??

      @Ozone946@Ozone9462 жыл бұрын

    • @@Ozone946 Yes. It's a regional dialect.

      @alexanderenrique3058@alexanderenrique30582 жыл бұрын

  • 先人たちの知恵と技術に感動。

    @user-bt8bv5cn4b@user-bt8bv5cn4b2 жыл бұрын

    • Hijō ni jukuren shita shokunin. I apologize now of my translation didn't work.

      @brianknow9142@brianknow91422 жыл бұрын

  • Its so relaxing to watch this master craftsman working. No unnecessary music or talking, just the tapping on the chisel. Thank you for posting this.

    @larss337@larss3373 жыл бұрын

    • Happy to hear that! Cheers! 🙌

      @dylaniwakuni@dylaniwakuni3 жыл бұрын

    • I cant believe how many fantastic videos are ruined by obnoxious music.

      @silverishme8675@silverishme86753 жыл бұрын

    • @@silverishme8675 haha yea

      @jimybobjim@jimybobjim3 жыл бұрын

    • Sure, your preference! Cheers

      @DamageMaximo@DamageMaximo3 жыл бұрын

    • @@silverishme8675 Sure, your preference! Cheers

      @DamageMaximo@DamageMaximo3 жыл бұрын

  • This video isn't click bait, but the joint itself is.

    @freedomcaller@freedomcaller3 жыл бұрын

    • I too was disappointed that it is not impossible

      @thecurrentmoment@thecurrentmoment3 жыл бұрын

    • It's smart and plays on pretty clear assumptions. When I saw the diagonal profile I actually laughed out loud and thought it was brilliant. This is one of those things where if I bought one I would say "I not sure how they did it either but I'm sure it isn't a veneer"

      @CtrlAltRetreat@CtrlAltRetreat3 жыл бұрын

    • I think so too because it’s an illusion, and a lot of extra work for something that probably isn’t as strong as a simpler joint and weaker than what it appears to be.

      @Anvilcjl@Anvilcjl3 жыл бұрын

    • @@Anvilcjl well no,because this joint have actualy been used time and time again in Japan

      @coolyeah2410@coolyeah24103 жыл бұрын

    • Yall really suprised that the video "making the impossible joint" is not about making an acually impossible joint. Like duh, he cant make something that is impossible to make. The joint is called "impossible to make" coz of how it looks

      @kdr1235@kdr12353 жыл бұрын

  • This is amazing. Elegant and precise. Woodcrsfting in this manner is so rare these days. Thank you💛

    @someonesdaughter3180@someonesdaughter31802 жыл бұрын

    • Elegant and precise are often used to describe musicians, authors, athletes. I love that it can also be used for this. Artistic design that's functional.

      @takaorobinson8719@takaorobinson8719 Жыл бұрын

  • What an incredible joint to make! The super sharp chisels and the accuracy of the cuts with the saws, inspirational!

    @tachi98lep@tachi98lep2 жыл бұрын

  • The noise of the sped-up chiselling is sooo satisfying

    @rand5106@rand51063 жыл бұрын

    • Its perry the platapus!

      @korniso@korniso3 жыл бұрын

    • Its like woodpecker.

      @sheerenergy8602@sheerenergy86023 жыл бұрын

    • Watch at 2x speed. It's even better

      @frankroquemore4946@frankroquemore49462 жыл бұрын

    • Trrrrrr trrrrr tar tarrrr

      @OnepieceEp@OnepieceEp2 жыл бұрын

    • It's like a musical machine gun

      @mikmop@mikmop2 жыл бұрын

  • I'm honestly impressed by the craftsmanship. I wasn't expecting the hand tools!

    @mrtrigger2016@mrtrigger20162 жыл бұрын

    • I’m not sure this would be really doable with power tools. The wood work is too delicate for that

      @DK-lz7kg@DK-lz7kg2 жыл бұрын

    • @@DK-lz7kg I agree. Sometimes, you need the lighter touch of a human handsaw rather than a circular saw. Much more precise, even if it takes more time.

      @gunsandroses896@gunsandroses8962 жыл бұрын

    • @@DK-lz7kg maybe a CNC machine but idk

      @yyhrva5605@yyhrva56052 жыл бұрын

    • His skills are at peak perfection

      @OhSoTiredMan@OhSoTiredMan2 жыл бұрын

    • @@yyhrva5605 Yea I've seen other youtubers do it with a CNC machine, the fact that this guy did it all by hand is amazing

      @a.carneirozhu8104@a.carneirozhu81042 жыл бұрын

  • Traditional Japanese woodworking is positively beautiful, as well as ingenious. Those chisels are stupid sharp.

    @yuwish6320@yuwish63202 жыл бұрын

  • I am thoroughly impressed! It just shows me how much I have left to learn. I love this type of content, as opposed to the videos that show simple hacks, because this type of video shows you that there is still virtue in dedication and doing hard things. Very inspiring.

    @bcb2585@bcb25852 жыл бұрын

    • Well said

      @takaorobinson8719@takaorobinson8719 Жыл бұрын

  • I watched the whole video just to find out how it fits

    @nenaddimitrijevic1147@nenaddimitrijevic11473 жыл бұрын

    • I watched the end of the video just to finds out how it fit sooner

      @lefaxiong@lefaxiong3 жыл бұрын

    • I skipped to the end...

      @Nickelodeon81@Nickelodeon813 жыл бұрын

    • Noob. I skipped to the last minute

      @Nobddy@Nobddy3 жыл бұрын

    • I dont even play the video. I just let my wife tell me how it fits after she done watch the video.

      @kakigame9521@kakigame95213 жыл бұрын

    • Totaalmeente.. increible ingenio

      @marcbactxion@marcbactxion3 жыл бұрын

  • I'm more impressed with how sharp your chisels are. Jesus.

    @AGfrom83@AGfrom833 жыл бұрын

    • Yeap, especially when chiseling against the grain

      @jwd215@jwd2153 жыл бұрын

    • I was thinking it's the wood being soft or some shi lol

      @chvishal@chvishal3 жыл бұрын

    • Same there - jeez, one slip and down a finger or two!

      @terrydavis2552@terrydavis25523 жыл бұрын

    • I took a woodworking class and the first two days were spend on how to sharpen cutting tools. This was on timber frame houses. Wish I could remember it now.😄 neat video.

      @robertinscoe2379@robertinscoe23793 жыл бұрын

    • It is necessary.

      @superchroma@superchroma3 жыл бұрын

  • Japanese woodworking craftsmanship is second to none...💯☝🤫

    @thegardner800@thegardner8002 жыл бұрын

  • I am going to a timber school soon. And I have tried to make wood joints before and failed horribly, but I know how much patience and perfection you need for these thing. So great job 👏

    @Chips308@Chips3082 жыл бұрын

  • His control is amazing. Notice how he takes small cuts as he chisels. Also notice the backside of his chisel is like a mirror.

    @farklefuster6876@farklefuster68763 жыл бұрын

    • You noticed two great points! Cheers!

      @dylaniwakuni@dylaniwakuni3 жыл бұрын

    • That's really how chisels are meant to be used. Same reason chefs don't bludgeon wildly with a knife. It's a fine skill but an essential part of woodworking otherwise you're not going to be able to make anything presentable.

      @BlueZirnitra@BlueZirnitra3 жыл бұрын

    • It is said you can tell a lot about some one based on the condition of their tools. Amazing work and amazing skill.

      @hellfire33100@hellfire331003 жыл бұрын

  • The fact that he did it all with his hand tools and did not use machines makes it so much better.

    @Milan-db3uy@Milan-db3uy2 жыл бұрын

    • Judging from the sound he used a hydraulic hammer. Since this is youtube, where users are slower than elsewhere: I am joking. And if you were just enraged, then this means you, yes.

      @bur2000@bur20002 жыл бұрын

    • Tbf that's how all carpenters make joints if they are worth their salt

      @williamoneswhannell1060@williamoneswhannell10602 жыл бұрын

    • @@bur2000 ???¿???

      @lounirs@lounirs2 жыл бұрын

    • @@bur2000 Looked more like a hydraulic arm than a hammer to me. That sawing was of Steve Austin standard. For anyone under 40, not the wrestler.

      @zacmumblethunder7466@zacmumblethunder74662 жыл бұрын

    • it's the artistry of the design of the structural integrity that makes it 'better' - NOT the lack of using machines.

      @ayoutubehogotztaeattoo2871@ayoutubehogotztaeattoo28712 жыл бұрын

  • Cool stuff. I love the showing of the whole outside before any marking/shaping. It's fun to pause after seeing the 4 faces, and take a moment to figure out the possible inside shapes!

    @patientred3203@patientred32032 жыл бұрын

  • I have no idea how the algorithm put this in my feed, but it was absolutely captivating.

    @CVSoprano@CVSoprano2 жыл бұрын

  • I love how the title doesn't even mention that it's done entirely with hand tools. Masterful work.

    @sihTdaeRtnaCuoY@sihTdaeRtnaCuoY2 жыл бұрын

    • @@marxgalacticambition7023 nope, it entirely matters how it was made.

      @RyanLeeW@RyanLeeW2 жыл бұрын

  • This guy makes it look easy, but that precision with handtools? That's serious dedication to craft and project, with a heap of talent to boot.

    @Helxas@Helxas2 жыл бұрын

    • If you keep talking like this you'll never achieve anything in your life

      @cube4547@cube45472 жыл бұрын

    • @@cube4547 Ahh yes appreciating other peoples hard work means you will never achieve something.

      @dovydasgrigas441@dovydasgrigas4412 жыл бұрын

    • It looks so difficult because of the speed-up. Wood-carving is so slow that as long as you're using the proper techniques and not too much brute force, accuracy isn't a problem. It's mostly about knowledge and keeping your tools in good condition.

      @Santi-bt7if@Santi-bt7if2 жыл бұрын

    • I think wording it as hard work, practice and skill would've been better than talent

      @animeizsyellenide@animeizsyellenide2 жыл бұрын

    • @@dovydasgrigas441 there's no such thing as talent. If you keep thinking you need some magic, help from god or genetic luck to be relatively successful, skilled or knowledgeable then you'll never be any of those things.

      @cube4547@cube45472 жыл бұрын

  • I don't know what's more impressive. The layout of the work or the incredible chisel work . Truly amazing art.

    @Shotsmoky@Shotsmoky2 жыл бұрын

  • "I am more than a power tool myself"-Dylan Ivakuni

    @sasikala5305@sasikala53052 жыл бұрын

  • Wow ! I'm a welder of 35yrs I have since retired my eyes have waned but , they're still good enough to recognize the work of a Master ! What a gifted set of hands I would be proud to work / learn from your skill set . It is my hope that you have and are teaching a room full of apprentice's your craftsmanship you are an Artisan !!

    @grandpabill6684@grandpabill66843 жыл бұрын

    • Hope ur eyes get better

      @Franc822@Franc8222 жыл бұрын

    • Its always good to see people well versed in the field of craftsmanship praising one another

      @everythingsalright1121@everythingsalright11212 жыл бұрын

    • If you have cataracts and can get surgery, life is much brighter.

      @imho2278@imho22782 жыл бұрын

    • @@imho2278 Thank you for your response ! I don't have cataracts. I'm just an old fart who is losing his visual acuity . Wearing glasses is about as good as it's gonna get for me . 😎

      @grandpabill6684@grandpabill66842 жыл бұрын

    • Check out Grampa Amu. He'll blow your mind. ...fellow welder here, btw.

      @_Solaris@_Solaris2 жыл бұрын

  • when they said people back then can make homes out of wood without a single nail, this video proved how that is possible

    @haziqsembilanlima@haziqsembilanlima2 жыл бұрын

    • There's a bridge in Cambridge, England, that was built without nails.

      @zacmumblethunder7466@zacmumblethunder74662 жыл бұрын

    • Yeah I'm glad I got to witness fine Craftsman but damn

      @GlitchTechV1@GlitchTechV12 жыл бұрын

    • They built entire castles in Japan

      @laspilly@laspilly2 жыл бұрын

    • And yet at the same time because this one join is this labour intensive, why it is also functionally impossible in today's world

      @greebj@greebj2 жыл бұрын

    • @@greebj you can automate the procedure, though

      @softwarelivre2389@softwarelivre23892 жыл бұрын

  • Amazing Japanese wood craftsmanship!

    @Redplane500@Redplane5002 жыл бұрын

  • Japanese joinery is always perfection, amazing.

    @abdusserally7437@abdusserally7437 Жыл бұрын

  • Boss- "This looks great, we're gonna need a thousand of these by tomorrow."

    @dahwe12@dahwe122 жыл бұрын

    • Because you're so good with it, you're from now on responsible for it

      @MaDrung@MaDrung2 жыл бұрын

    • Boss: "Congratulations! You are a victim of your own success."

      @piratekingthaszar7912@piratekingthaszar79122 жыл бұрын

    • This... is why I don't get coffee breaks anymore...

      @robdom91@robdom912 жыл бұрын

    • @@robdom91 right!

      @dahwe12@dahwe122 жыл бұрын

    • And what i do after lunch ?

      @Varimos@Varimos2 жыл бұрын

  • 3:35 Video: person making the most complex joint KZhead caption : applause

    @primeaucourant1176@primeaucourant11762 жыл бұрын

    • even KZhead impressed by his craftsmanship

      @muhammadaqil7025@muhammadaqil70252 жыл бұрын

    • Lmao

      @yancybuenavista9032@yancybuenavista90322 жыл бұрын

    • I had the same thing 😂

      @rileykortemusic@rileykortemusic2 жыл бұрын

    • Haha

      @ungabungalunga1002@ungabungalunga10022 жыл бұрын

  • Amazing! Such a precise job without any machinery!

    @michaelgolub2019@michaelgolub20192 жыл бұрын

  • Seeing thumbnail : what? How? See the diagonal join : Ah, that make sense.

    @farihmuhammad8838@farihmuhammad88382 жыл бұрын

    • Thanks for your insight

      @cube4547@cube45472 жыл бұрын

    • From impossible joint to sorta possible joint

      @johncarlofernandez2698@johncarlofernandez26982 жыл бұрын

    • This is peak KZhead comment brainpower

      @HandledToaster2@HandledToaster22 жыл бұрын

    • @@johncarlofernandez2698 its 100% possible tho

      @fireemblemistrash75@fireemblemistrash752 жыл бұрын

    • reminds me of the dove box

      @ambrosxa@ambrosxa2 жыл бұрын

  • 1000 years in future, people will find this joint, and think it was built by aliens.

    @nfrancisj2122@nfrancisj21223 жыл бұрын

    • What if we're aliens pretending to be humans

      @NetiNeti-gm5bz@NetiNeti-gm5bz3 жыл бұрын

    • 😄😄😄

      @EmilyOrtiz@EmilyOrtiz3 жыл бұрын

    • "People in 2020 couldn't have possibly been this smart, they must have had help!" - People in 3020

      @jordanrichards320@jordanrichards3203 жыл бұрын

    • i've lived in 10 countries and 2 planets. Planet earth and planet Japan.

      @esotericist@esotericist3 жыл бұрын

    • Right, because it would be unfathomable to future humans that past humans had any skills? Do people think archaeology is the study of alien artifacts?

      @BlueZirnitra@BlueZirnitra3 жыл бұрын

  • I'm impressed that this was done by hand and not by modern machinery. I've seen this joint before but never cut by hand. Beautiful work.

    @aaronmcneal1698@aaronmcneal16987 ай бұрын

  • Bravo. The precision of each cut is mind bending, and not a piece of sand paper in sight! 👏

    @charlesphillips8635@charlesphillips8635 Жыл бұрын

  • Only one possible conclusion: I know nothing about woodworking

    @markfieten9558@markfieten95583 жыл бұрын

    • you should at least know that it requires wood.. and working with wood

      @jub8891@jub88913 жыл бұрын

    • @@jub8891 NO SHlT????

      @BenBLR@BenBLR3 жыл бұрын

    • @@jub8891 GODDAMN!

      @zidan2360@zidan23603 жыл бұрын

    • @@jub8891 My eyes have been opened

      @banant5620@banant56203 жыл бұрын

    • @@jub8891 Sherlock Holmes, that you?

      @kris_py@kris_py2 жыл бұрын

  • I love how impossible it looks at first glance, then finding out the solution is very simple - or as simple as it could be if you're a master carpenter!

    @RichardM-kv4uu@RichardM-kv4uu2 жыл бұрын

  • Absolutely fascinating. World-class pin-point chiseling to create a wonderful joint. Which is not only beautiful but also seems to be strong as well. Lovely stuff keep it up!

    @hemannjatia2062@hemannjatia20622 жыл бұрын

  • It is in fact an illusion, but one of absolute brilliance. This is what woodworking is all about. I couldn't hope to get something like this right if I tried it. Hat's off to you!

    @meme9492@meme94922 жыл бұрын

  • I love watching things that make me realize just how much I suck at everything.

    @ChrisDidGood@ChrisDidGood2 жыл бұрын

    • That's what she said

      @rodrigoiglesias6938@rodrigoiglesias69382 жыл бұрын

    • I hate watching things like that

      @ayoutubehogotztaeattoo2871@ayoutubehogotztaeattoo28712 жыл бұрын

    • Maybe stop watching and learn something instead? Naaaaah, too hard.

      @HandledToaster2@HandledToaster22 жыл бұрын

    • @@HandledToaster2 people learn by watching though.......No?

      @chaosismyway690@chaosismyway6902 жыл бұрын

    • @@chaosismyway690 have you learned woodcrafting from this video?

      @HandledToaster2@HandledToaster22 жыл бұрын

  • Man, this kind of chisel work always blows my mind and impresses the hell out of me because I know there's no way I could ever achieve that kind of perfection, shaving off exactly the right amount, getting all the flats just right. If any one of then isn't just right then the piece either won't assemble, or it might have gaps. That level of precision is just exceptional to me.

    @NickC_222@NickC_2222 жыл бұрын

    • You could if you have the right chisels and patience

      @truthneverlies4922@truthneverlies49222 жыл бұрын

    • This isn't talent. It's a skill through repeated actions.

      @tmmnago2722@tmmnago27222 жыл бұрын

    • @@tmmnago2722 This guy gets it. There is nothing to prevent the average person from achieving this level of craftsmanship, save for years and years of practice.

      @totsuka2213@totsuka22132 жыл бұрын

    • @@totsuka2213 well I think the dedication that must've gone into achieving this level of skill is very impressive

      @fatimaalaa2659@fatimaalaa26592 жыл бұрын

    • Dude you absolutely could make this, all it takes is patience

      @whyshouldsergregorturnbrig6879@whyshouldsergregorturnbrig68792 жыл бұрын

  • Nothing but a saw, chisel & mallet! No power tools...very intricate!

    @adnankaba3372@adnankaba3372 Жыл бұрын

  • Finish carpenter here - genius work. Cheers!

    @brentruss2168@brentruss21682 жыл бұрын

  • That flow of sped-up background noises (church bells, cars, voices et all) is a treat on its own.

    @renderizer01@renderizer012 жыл бұрын

  • As a Danish carpenter and woodworker, I find this very fascinating. I haven’t seen a joint like that before. Beautiful!

    @HITARIX@HITARIX2 жыл бұрын

    • go china, u will see more than this,this construction be called '榫卯' in chinese. 事实上,日本的木工技术是从中国流传进入的

      @eugenesilence4009@eugenesilence40092 жыл бұрын

    • @@eugenesilence4009 lol

      @amanjha5916@amanjha59162 жыл бұрын

    • @@eugenesilence4009 and yet China can’t build roads that don’t fall apart and collapse daily

      @Muscovy7@Muscovy72 жыл бұрын

    • @@eugenesilence4009 Your social credits have been increased. Congratulations!

      @tomate045@tomate0452 жыл бұрын

    • The two modern China don’t use this technique anymore. Cost to much time and money.

      @eric_asa_c@eric_asa_c2 жыл бұрын

  • This is an amazing joint that just stumps the European style joinery loved it great execution!!!

    @danny5327@danny5327 Жыл бұрын

  • I was simply fascinated by watching this video. This is truly art of worksmanship! Respect!

    @peterfrigge5803@peterfrigge58032 жыл бұрын

  • Imagine there being a disclaimer... "*This footage is not sped up.*"

    @Mimirai@Mimirai2 жыл бұрын

    • me: enables 2x speed

      @papyfun5097@papyfun50972 жыл бұрын

    • That would be funny because technicly the video asked

      @toob_shoob1324@toob_shoob13242 жыл бұрын

    • Howb

      @toob_shoob1324@toob_shoob13242 жыл бұрын

    • Why on earth have 300 people liked this moronic comment. What an asinine thing to say. *Sees slowed down content* “Imagine if there was a disclaimer that said this isnt slowed down LOOOOOL hhahhaha so funny!!!”

      @josephg9249@josephg92492 жыл бұрын

    • @@josephg9249 r/woooosh

      @TeaTabby@TeaTabby2 жыл бұрын

  • I love how the wood is hard yet so soft. Edit: Oh no, what did I just say

    @mnnptl@mnnptl3 жыл бұрын

    • lmfao

      @DamageMaximo@DamageMaximo3 жыл бұрын

    • I feel you man

      @chipperphilly5083@chipperphilly50833 жыл бұрын

    • Hol’ up 03-30-31 12:01 AM (PDT)

      @tempestshadow9992@tempestshadow99923 жыл бұрын

    • ha ha thats funny

      @stuff3862@stuff38623 жыл бұрын

    • Haha, I hope it was intentional!

      @mist3325@mist33253 жыл бұрын

  • That’s fricken amazing patience and craftsmanship .

    @Hungrybird474@Hungrybird4742 жыл бұрын

  • I must say that when I first saw it I thought that it was an impossible joint, but through wonderful craftsmanship and ingenuity this joint is magic. Wonderful crafysmanship.

    @colinsmith6116@colinsmith61167 ай бұрын

  • *I love the sound of sped up wood chiseling.*

    @CYGNIUS@CYGNIUS2 жыл бұрын

    • Wanna hear a metal version of this?! (surprised this has nothing to do with my metal music lol) I actually use this vid to sleep to. kzhead.info/sun/oLmfe5ehrGljgWw/bejne.html

      @devinhence3104@devinhence31042 жыл бұрын

    • perry the platypus sounding ass

      @CH-gm6rl@CH-gm6rl2 жыл бұрын

    • Kinda sounds like someone is doing a bit of bedroom woodworking lol

      @clockworkNate@clockworkNate2 жыл бұрын

    • reminds me of a woodpecker which i guess is pretty fitting

      @squiggles5640@squiggles56402 жыл бұрын

    • yay 100th like by me

      @Ashish.1.1@Ashish.1.12 жыл бұрын

  • No machines, no chemistry magicks, not even sand paper. Only chisels, saw, wooden clamps, some hammering. And godlike dedication.

    @ivandovranic5834@ivandovranic58343 жыл бұрын

    • those chisels were sharpened somehow

      @mro4922@mro49223 жыл бұрын

    • @@mro4922 You can hand sharpen to a mirror finish like that... I've done it multiple times over the last 3 days.

      @frankroquemore4946@frankroquemore49462 жыл бұрын

    • @@mro4922 probably on a stone.

      @nexus8516@nexus85162 жыл бұрын

    • That lumber is definitely sandblasted before he buys it tough

      @jacobbass2056@jacobbass20562 жыл бұрын

    • And to think ancient chinese slaves had to do thousands of joints like these for buildings

      @Franc822@Franc8222 жыл бұрын

  • So satisfying watching a master craftsman at work!

    @MrDaveCoetzee@MrDaveCoetzee2 жыл бұрын

  • If you break this joint down to its basic components it is somewhat simpler to understand. It is basically a double mortise/tenon joint done at a 45 degree angle with the twist of sliding dovetails added to the end of each tenon.

    @chaecoco2@chaecoco27 ай бұрын

  • If there's one thing I've learned about "impossible joints," it's that whatever it looks like is a lie.

    @SuperSpatman@SuperSpatman3 жыл бұрын

    • Its called an optical illusion, magicians use them all the time this was a neat example of one

      @ronaldharris6569@ronaldharris65693 жыл бұрын

    • @@ronaldharris6569 always do amusing that usually the trick of the trick is pushing the boundaries if credulity. The tricked watcher can't even conceive of the work that went into the staging of a seemingly simple trick. A often it's about putting in a lot more effort than people would suppose anyone would invest for the result. Magic I mean, not the woodworking.

      @fomoran@fomoran3 жыл бұрын

    • Is a very beautiful joints, and that is the meaning with this joint

      @asiastreets4032@asiastreets40323 жыл бұрын

    • Og

      @bval2201@bval22013 жыл бұрын

    • @@asiastreets4032 and it is as strong as the wood so it's a good thing

      @ronaldharris6569@ronaldharris65693 жыл бұрын

  • A combination of evenly grained wood, sharpest tools, a steady hand and focused mind, yes this is great accomplishment. I am amazed Congratulations and thanks for sharing this seemingly impossible task!

    @virginiogarcesjr293@virginiogarcesjr2932 жыл бұрын

    • Why do you send comments out into the ether? What purpose does it serve?

      @SargentandGreenLeaf@SargentandGreenLeaf2 жыл бұрын

    • @@SargentandGreenLeaf aren’t you doing the same thing right now? also why do you care?

      @valx5@valx52 жыл бұрын

    • Nothing serves any purpose, all comments are fleeting moments that are glimpsed only by a vanishing few and leave no trace or meaningful impact behind them before they are inevitably forgotten. Including this one :D

      @rorychivers8769@rorychivers87692 жыл бұрын

    • @@rorychivers8769 lost... Like tears... In the rain -The man, Rutgur Hauer

      @honuman39@honuman392 жыл бұрын

  • Takes skill, patience and years of practice to achieve this. How the 2 pieces slotted into each other is like magic.

    @evora9081@evora90812 жыл бұрын

  • The world needs more of this. Love it!

    @earbjr4715@earbjr4715 Жыл бұрын

  • Thank you for graciously showing us how you made that joint. I thought you might have done it another way, but seeing this solution has opened up entirely new doors to solutions in the future for me to use. Thank you again, this kind of thing is helping me improve my repertoire in joinery, and I appreciate it greatly

    @johnathonfrancisco8112@johnathonfrancisco81122 жыл бұрын

    • Yeah i though it was only on two sides and figured it was a twist on kind of thing

      @user-nb8yt2il2r@user-nb8yt2il2r2 жыл бұрын

  • Me: That’s impossible. Woodworker: I know what I’m about, son.

    @coreymoore1443@coreymoore14432 жыл бұрын

    • Give me all the bacon and eggs you have

      @acedia_14@acedia_142 жыл бұрын

    • DELETE ALL PICTURES OF RON!

      @nish720@nish7202 жыл бұрын

    • I call this a turf 'n' turf.

      @coreymoore1443@coreymoore14432 жыл бұрын

  • ただ、ただ、素晴らしい。日本人の誇りが、この動画に存在する。

    @andoorinn6015@andoorinn6015 Жыл бұрын

  • Always a pleasure watching a sharp chisel at work.

    @omahanprabla3058@omahanprabla30582 жыл бұрын

  • I usually scroll through videos like this to save time, just wanting to get an idea of how the affects are achieved. But the precision and sharpness of the tools were mesmerizing. Had to watch it all the way through. If any of my tools were that sharp, I'd be a danger to myself and anyone within arm's reach. Truely amazing work. Thank you for the video.

    @mapleholler9800@mapleholler98003 жыл бұрын

    • Thank you! That's great to hear! 😊

      @dylaniwakuni@dylaniwakuni3 жыл бұрын

    • Same here, first I had to guess at how it pops together, then I wondered how he got those tools so sharp where he could push them through hard wood. I ended up watching everything

      @mikelliteras397@mikelliteras3973 жыл бұрын

    • sharp tools are safer than stump tools😉

      @Hermelin.G1@Hermelin.G13 жыл бұрын

    • @@Hermelin.G1 Exactly... Less force is required to push the tool through the material. Less chance of a slip.

      @jimmurphy6095@jimmurphy60953 жыл бұрын

    • @@jimmurphy6095 absolutely correct!

      @Hermelin.G1@Hermelin.G13 жыл бұрын

  • Something about the sped up sounds of carving and chiseling is a bit mesmerizing

    @amateurcinematics@amateurcinematics2 жыл бұрын

  • The crazy thing is that you might think the video maker is "tricking" you until the ending, but actually, the "trick" is right there in the description. It''s just that the video is so mesmerising that, well, who's gonna *read* before hand? Congratulations for the great work!

    @FernieCanto@FernieCanto2 жыл бұрын

  • japanese woodworking is really incredible how clean it is

    @champy5095@champy50952 жыл бұрын

  • This is not woodcraft, it is woodart. I am stunned and fascinated by this performance.

    @christophaltmann8711@christophaltmann87113 жыл бұрын

    • Thank you 😊

      @dylaniwakuni@dylaniwakuni3 жыл бұрын

    • I thought it was witchcraft

      @nathanwhite609@nathanwhite6093 жыл бұрын

    • P

      @malikbarbrie5257@malikbarbrie52573 жыл бұрын

  • Imagine the competency of the craftsman who invented this joint.

    @HighMaintenancePS@HighMaintenancePS3 жыл бұрын

  • So good. It was super chill to watch. Thank you ❤️

    @Quaxlabax@Quaxlabax2 жыл бұрын

    • Happy to hear that 😊

      @dylaniwakuni@dylaniwakuni2 жыл бұрын

  • I really like when a video just shows you exactly what's going to be in it, no clickbait. I could definitely not smoke this joint.

    @ZorroVulpes@ZorroVulpes2 жыл бұрын

  • I made this using light coloured wood and a dark brown felt tip.

    @UKallroad@UKallroad3 жыл бұрын

  • The wonderful free thinking mind that created this joint is of godly knowledge.

    @whitedragon4050@whitedragon40503 жыл бұрын

    • Wowsers... you have apparently never met God.

      @ibealion1@ibealion13 жыл бұрын

    • @@ibealion1 well, have you?

      @herrvorragend1175@herrvorragend11753 жыл бұрын

    • @@herrvorragend1175 I have... Dec 14th, 2011 sometime between 1:00 and 3:00 a.m. I was quite distressed, so I don't know the exact time... but it was by far, the most wonderful and life-changing moment of my life.

      @ibealion1@ibealion13 жыл бұрын

    • @@ibealion1 I'm happy for you then :)

      @herrvorragend1175@herrvorragend11753 жыл бұрын

    • @@ibealion1 That can't be true because he was visiting my grandma at that time. Are you sure it wasn't a burglar or a sleepwalking family member?

      @BlueZirnitra@BlueZirnitra3 жыл бұрын

  • This is amazing craftsmanship, and I am ashamed to admit, but who else besides me skips to the end to watch him fit the pieces together?

    @donaldjones8920@donaldjones89208 ай бұрын

  • The sound of wood carving is so relaxing to listen to, I could fall asleep to this video.

    @frostbite7553@frostbite75532 жыл бұрын

  • I closed my eyes and his chiseling sounded like a descent of woodpeckers. Amazing skill work. Ciao from Little Italy 🇮🇹 Montréal

    @sauropod5393@sauropod53933 жыл бұрын

  • The chiseling is pure ASMR

    @velocifero4167@velocifero41672 жыл бұрын

    • Bro same on 2x speed it is amazing

      @miguelherrera5654@miguelherrera56542 жыл бұрын

    • Yeah, it is kinda. I noticed that.

      @_Solaris@_Solaris2 жыл бұрын

    • I felt so relaxed, this shit is entrancing.

      @LuizAlexPhoenix@LuizAlexPhoenix2 жыл бұрын

    • It lowkey sounds like Perry the Platypus or keyboard clicking at times

      @raviedavieu@raviedavieu2 жыл бұрын

  • Very thoughtful idea !!! Thanks for the video !!!

    @zahir2023@zahir20232 жыл бұрын

  • この建具の作り方を見せてくれてありがとう、それを知ることができて光栄です 🙏🏼

    @amirharsat2224@amirharsat222410 ай бұрын

  • Am i the only one who thinks that this is really satisfying? Both the sound and seeing him slowly chisel away at the wood

    @dragonfury1565@dragonfury15653 жыл бұрын

    • "slowly"... I wish I could chisel away hardwood at this speed with this precision. (Yes, I'm aware the footage is sped up)

      @SvenGBerlin@SvenGBerlin2 жыл бұрын

  • I would make an unfixable mistake so quickly. There isn't a single step to this process that I could not mangle beyond recognition. THOSE are some tight seams, bravo!

    @teslainvestah5003@teslainvestah50033 жыл бұрын

  • That's pretty much the trick I expected from looking at the thumbnail. Really nicely done !

    @Kiwi-fl8te@Kiwi-fl8te2 жыл бұрын

  • Beyond amazing job, and that dark wood sure is extra pretty. This takes great skill and patience! ❤️

    @lauragraves4342@lauragraves4342 Жыл бұрын

  • You’re telling me that shit just slides in

    @frog5984@frog59842 жыл бұрын

    • Hur dur das wat she sed

      @whyshouldsergregorturnbrig6879@whyshouldsergregorturnbrig68792 жыл бұрын

    • Think clean thoughts think clean thoughts think clean thoughts

      @atlf3357@atlf33572 жыл бұрын

    • That’s what’s she said

      @kladdha_@kladdha_2 жыл бұрын

    • Lmao

      @cassandraa@cassandraa2 жыл бұрын

    • Constipation

      @yosshimaru7941@yosshimaru79412 жыл бұрын

  • There’s something so therapeutic about hearing “hEH fhoo” when he was blowing away debris

    @Bumbassery@Bumbassery2 жыл бұрын

    • Oogway

      @Wilson0621@Wilson06212 жыл бұрын

    • ...bumbo? But thats my name

      @BumboMcJumbo@BumboMcJumbo2 жыл бұрын

    • @@BumboMcJumbo greetings fellow

      @Bumbassery@Bumbassery2 жыл бұрын

  • Incredible precision on the chiseling. Very impressive.

    @TheWinezen@TheWinezenАй бұрын

  • Amazing precision and skill, wow

    @stevedee3038@stevedee30382 жыл бұрын

  • me, who has never made anything out of wood and knows nothing about woodworking: "impossible?! Well, now I've got to see this"

    @ScientificallyStupid@ScientificallyStupid2 жыл бұрын

  • That’s way more satisfying than the classic “satisfying” stuff

    @simondavid2519@simondavid25192 жыл бұрын

    • Ikr!

      @mostofakamal4315@mostofakamal43152 жыл бұрын

  • This is exactly what I had in mind. I *love* this kind of joinery. Beautifully done and well-executed.

    @jenn976@jenn976 Жыл бұрын

    • Thanks 😊

      @dylaniwakuni@dylaniwakuni Жыл бұрын

  • 芸術としか言いようがないです。感動しました！

    @user-id5tv2qg7r@user-id5tv2qg7r2 жыл бұрын

  • 15 minutes of Age of Empires 3 working and building sound effects at various playback speeds.

    @dylanmilne6683@dylanmilne66833 жыл бұрын
KZhead