KZhead
Автокөліктер мен көлік құралдары

Don't Clean throttle body before watching this/Cleaning cable controlled or Electrical Throttle body

AliMECH
2021 ж. 16 Шіл.
2 230 732 Рет қаралды
Жүктеу

Throttle Body and Air-Intake Cleaner: amzn.to/2UcEXAF
In todays video i will show how to clean throttle body weather if its cable controlled or electrical
so Don't Clean throttle body before watching this, there are some things you should know before cleaning that way you don't damage your car and cost you more for repairing
Steps for gunk Cleaning cable controlled or Electrical Throttle body
---So for cleaning cable Controlled Throttle body, after i removed throttle body hose and spray CRC throttle cleaner with plate closed and then open the plate and spray the cleaner again, then wipe it with paper towel
after 5 minutes put the throttle hose back
--So for cleaning Electrical Throttle body, after removing throttle body hose, spray CRC throttle cleaner with plate closed and then put the key on (ON) position, ask someone to hold the gas paddle and spray the cleaner again, then wipe it with paper towel
release the gas paddle
after 5 minutes put the throttle hose back
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : facebook.com/ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер

  • You dont waste a minute of anyones time. Every video should be like this.

    @auntbarbara5576@auntbarbara55762 жыл бұрын

    • Thanks, i like to give more information is a short time, become when ppl having a problem, they should see the solution immediately

      @AliMECH@AliMECH2 жыл бұрын

    • But also remember, experience makes the difference

      @jenarorosado460@jenarorosado4602 жыл бұрын

    • 😂

      @babarbka0005@babarbka00052 жыл бұрын

    • This is wrong way too do it

      @mackmorris138@mackmorris1382 жыл бұрын

    • @@mackmorris138 how to do it correctly then, please explain, thanks.

      @tonyreyes9969@tonyreyes99692 жыл бұрын

  • To the point, no fishy glamour, no waste of time, simple and excellent information 🎉👍

    @TilakRajVerma@TilakRajVerma2 ай бұрын

    • I appreciate that!

      @AliMECH@AliMECH2 ай бұрын

  • This method is good when throttle body is slightly dirty. But if it’s too dirty better to open it and then clean from inner side too. Secondly never spray directly on throttle body when it’s attached all the dirt goes into intake. Better to apply spray on clean cloth and the clean it. That’s how i clean electric throttle of my cars.

    @ahmedghaznavi@ahmedghaznavi Жыл бұрын

    • Thks I Wuz wonder that

      @frozenking9394@frozenking93942 ай бұрын

    • Exactly if you know the engine is crapp it doesnt matter, but if you care about the health of your engine dont do it this way.

      @scottykilmer3920@scottykilmer3920Ай бұрын

  • If you came to the comments for the reviews , this a 100 stars review , no time wasted and both ways shown thanks

    @jesusavila629@jesusavila629 Жыл бұрын

  • Best throttle body cleaning video on YT. Only one I found describing how to safely and properly clean the electronic TB and neat tip with torque wrench.

    @martialarts151@martialarts1518 ай бұрын

  • I have a 2010 WV beetle with a 2.5 automatic. I noticed recently more hesitation while shifting. I followed your technique of using in my case a piece of wood to keep the throttle plate open. Its interesting how clean it looked from the outside, but after the seafoam spray it was like black ⚫️ tar coming from it. I felt resistance against the motor (buzzing noice) once I bumped the throttle plate. I was able to lightly brush the plate. After about 10 minutes of cleaning, i started the car up. Quicker starting, quieter idling, and consistently better shifting. Thats just from driving down my street. Thank you sir for your help. Eveything i needed was already home for some time so basically it was free maintenance.

    @dohc1067@dohc10677 ай бұрын

  • Thank you. Every LS400 Owner needs this lol

    @Coldwallbar@Coldwallbar Жыл бұрын

  • Thanks for sharing your video on cleaning throttle bodies. As a throttle body manufacturer, we appreciate your thorough steps for both cable-controlled and electronic throttle bodies. It's important to properly clean your throttle body to avoid damage to your car and expensive repairs. We'll be sure to recommend your video to our customers for proper maintenance.👍

    @loreadaauto@loreadaauto Жыл бұрын

    • Thanks, glad it was helpful and easy for understanding

      @AliMECH@AliMECH Жыл бұрын

    • A friend cleaned my throttle bottle with thinners, my car has been revving and consuming so much fuel itself since then. I’m struggling to get a spare throttle bottle for Chevrolet

      @tee3294@tee329411 ай бұрын

    • @@tee3294 Your friend may have sprayed way too much into the throttle body that it seeped into the electronic control panel on the side of it, causing damage. Very little cleaner is needed.

      @InexplicableBill@InexplicableBill7 ай бұрын

  • My dealership charges $89 for this service so watched this video and did it for a few pennies that the clear costs.

    @lancewhite4807@lancewhite48072 жыл бұрын

    • Awesome, glad that my video saved you money

      @AliMECH@AliMECH2 жыл бұрын

    • Mine wanted 159.00

      @wolfsden3812@wolfsden3812 Жыл бұрын

    • Yes it's worth that much if they're going to remove it and clean it properly, not just spray stuff into it.

      @843idfa@843idfa Жыл бұрын

    • Plus there’s more involved than just spraying in the throttle body it’s a 3 part kit that includes something like sea forming

      @jamaalblack9076@jamaalblack9076 Жыл бұрын

    • thank you for the good details on this. can you please tell me if ( super tech spray from walmart is ok for this? it says throttle body clean + it was the only type they had? ) thank you very much. )

      @daviddowns7552@daviddowns7552 Жыл бұрын

  • Excellent! Great camera work and step-by-step instructions. Thank you!

    @seanmcasey8376@seanmcasey8376 Жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH Жыл бұрын

    • @@AliMECH Take the throttle body off to clean! C’mon man.

      @gregroth4696@gregroth4696 Жыл бұрын

    • Exactly

      @thomasbrogan9102@thomasbrogan9102 Жыл бұрын

  • Made sense, to the point,into target. Thank bro

    @achmada9338@achmada93382 жыл бұрын

    • You are welcome, dont like to waste time 🙏🏻🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

    • @@AliMECH true, keep up bro.

      @achmada9338@achmada93382 жыл бұрын

  • Good video. Make sure to clean the Idle Air Control (IAC) valve while you’re in there. Same steps as shown but you’ll need brushes to scrub the housing, valve pintle, and spring.

    @spod2998@spod2998 Жыл бұрын

  • Good points! Today I cleaned my electrical throttle body with Gumout cleaner, my ignition is a push start and I don't have the option to leave it open the way you did with the long rod. Yes I did get the engine light, but after cleaning and spraying into the throttle body little at the time while revving the engine afterwards the Kia Niro accelerated like a champ, I almost could not feel it and small hills became easier to climb and I could feel the air going through very well with a roar. I also did have a 16OZ B12 Chemtrol cleaner for the fuel. Now I will be clearing the engine light soon.

    @Luigi13@Luigi13 Жыл бұрын

    • What codes did you get on the check engine light? I have 2018 Camry and my throttle body is not opening on key accessory position. is there any other way or should I move it by hand?

      @sumanravichandran9107@sumanravichandran9107 Жыл бұрын

    • @@sumanravichandran9107 The only way to open the throttle is by using a clean piece of wood or a hard plastic material to avoid scratching it . It is like a spring it will open and then spray the chemical a little at a time inbetween each spray when I rev the engine I close it by not touching it it goes back the way it is when you first start. And then rev it a little bit and spray gently again and again each time revving the engine at 2K RPM not to eceed 3K rpm. This was my experience towards the end I sprayed an 1/8 of a can and let it sit with the engine off, for about 45 minutes and took it for a drive. Drove for about 10-12 miles and it run beautifully? I have about 31.5K miles on my Kia Niro.

      @Luigi13@Luigi13 Жыл бұрын

  • "No need to use too much of the cleaner." LOL love this video!

    @oujiaboard3119@oujiaboard3119 Жыл бұрын

    • lol if you clean something always use more hahah, thanks

      @AliMECH@AliMECH Жыл бұрын

  • I like videos like this because I learned more here then at my work shop

    @edsalvador5939@edsalvador5939 Жыл бұрын

    • Thanks for letting me know, glad it was helpful

      @AliMECH@AliMECH Жыл бұрын

  • A little add up: -if you won't let it to dry, car may be hard to start for the first time because of fumes of cleaner left in the intake -if you have modern throttle position sensor it may need some time for ECU to readjust after cleaning. So it will be good if you replace ECU fuse before start cleaning and put it back after you reassemble all the parts.

    @EricJones1969@EricJones19692 жыл бұрын

    • Never heard anyone mention this other than removing the neg to battery. Does that work as well?

      @Nytellem@Nytellem2 жыл бұрын

    • @@Nytellem Might help but then you won't be able to use gas pedal for opening the throttle body right?

      @vakhtangjokhadze2427@vakhtangjokhadze24272 жыл бұрын

    • @@Nytellem Yes it does. I remove ECM1 and ECM2 fuses after I'm done for about 1 minute and then put them back in. I do this every time I modify my intake system...Now I got it just where I want it. So even when you are doing an intake system, throttle body spacer, exhaust, etc. It is always a good idea to reset the computer system this way. Plus it's easier than removing the battery terminal. Hope this helps.

      @jamesj.litteriojr.433@jamesj.litteriojr.433 Жыл бұрын

    • @@jamesj.litteriojr.433 where is this located in a Honda Accord 2011? Is it easy to disconnect and reconnect

      @premiumc2282@premiumc2282 Жыл бұрын

    • @@premiumc2282 I would look in the owners manual for fuses or fuse box at the back of the book. Once you locate it, then you can see how the layout is setup on your car and pick the ECM or ECU fuse/fuses. My Scion has 2 ECU fuses so I pulled them both after I cleaned the throttle body and waited one minute then put them back in to reset the computer everything was fine. Hope this helps.

      @jamesj.litteriojr.433@jamesj.litteriojr.433 Жыл бұрын

  • Now that is a smart way to clean the throttle body. I've seen people doing it other ways and then have to relearn the throttle idle control. This was EXTREMELY informative.

    @morningglory102@morningglory102 Жыл бұрын

    • Depending on the car, it may be easy to relearn it, like turning on the ignition, waiting 60s and turning it off. If it is, that's easier than using something to keep the pedal down and avoiding any contact with the throttle.

      @unnainconnu9098@unnainconnu9098 Жыл бұрын

    • For a Toyota, the idle relearn procedure is super easy

      @brazyuniverse4221@brazyuniverse4221 Жыл бұрын

    • The reason you relearn the body idle air control is because you removed the smut from the throttle body that is causing the plate to have to open more to run. Not because you manipulate the plate.

      @codyprice0295@codyprice0295 Жыл бұрын

    • @@codyprice0295 There is a position sensor in those electronic versions. Manually moving them throws them out of sync or damages them.

      @toddh6234@toddh62346 ай бұрын

    • @@toddh6234 on what kind of vehicle? That’s a very generic statement

      @codyprice0295@codyprice02956 ай бұрын

  • Kaka Ali your chanel is one of the most useful Kurdish Channels on the Web, thank you for all these informative videos you share with us.

    @stephenhaval6769@stephenhaval6769 Жыл бұрын

    • Glad to hear that, and appreciate your support brother

      @AliMECH@AliMECH Жыл бұрын

  • Very informative. Thank you !🙂

    @BenDieseL313@BenDieseL3139 ай бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH9 ай бұрын

  • Excellent work very well! Car is running smoooooth! 2012 Forester with electric throttle.

    @dahaze140@dahaze140 Жыл бұрын

    • Great to hear!

      @AliMECH@AliMECH Жыл бұрын

  • I always remove the throttle when cleaning them. Maybe this is short cut but i want it cleaned well on thw other side too and not riak of having the dirt and grime going to the intake manifold.

    @erwinmelgar9575@erwinmelgar95752 жыл бұрын

    • Exactly, those cheap youtube videos try to lure people into clicking liking and subscribing with cheap advice, and don't care what happens to people's cars. I had a ton of grime come out when I removed and cleaned mine.

      @843idfa@843idfa Жыл бұрын

    • Than you get check engine lights if you don’t relearn it

      @GametimeSlime@GametimeSlime7 ай бұрын

  • Also when you are done your car might be a little hard to start and when it does you might see smoke from your exhaust. It goes away pretty quickly depending on how much cleaner that you had used. I can only speak on the ones with the cable. If you have one that is really filthy it is better to remove it to give it a good cleaning. Old toothbrushes really make short work out of cleaning one and you can use a toothbrush even with the throttle body on the engine. Great source of information I must definitely hit the like and subscribe. Look forward to watching another one of your videos.

    @davidfrank2824@davidfrank28242 жыл бұрын

    • If using a toothbrush and some carbon falls in, is that okay?

      @brazyuniverse4221@brazyuniverse4221 Жыл бұрын

  • Had my throttle body off when I replaced the coolant bypass hose on my 2005 Tacoma and cleaned it I moved the throttle plate by hand very slowly and cleaned it no damage what so ever and that was 2 years ago still running great

    @1995dresser@1995dresser Жыл бұрын

    • Most damage comes from cleaning throttle body while still connected electrically.

      @royquesada5295@royquesada5295 Жыл бұрын

    • @@royquesada5295 Yep

      @1995dresser@1995dresser Жыл бұрын

    • Thks 😮

      @frozenking9394@frozenking93942 ай бұрын

    • You are right. Open the electronically activated throttle plate very slowly and gently. Don’t force anything. Spray the microfibre cloth not inside the throttle body and use one finger to carefully wipe.

      @Zeek800@Zeek800Ай бұрын

  • A well taught video thanks I'm a female and I am going to try it now!

    @MrTitaocasio@MrTitaocasio4 ай бұрын

    • Thanks for watching

      @AliMECH@AliMECH4 ай бұрын

  • Thank you for doing electrical throttle body. I was thinking o would have to remove throttle body.

    @stephenharvey5289@stephenharvey5289 Жыл бұрын

  • You can in fact, open most electrical throttle body by hand, may want to check with your individual manufactuer but Hondas, Toyotas, Subarus all allow you to open the butterfly valve by hand, just don't over extend it and do a throttle body / idle relearn afterwards.

    @churchofseabass9227@churchofseabass9227 Жыл бұрын

  • Thanks. Well done, bruh.

    @thomasbrogan9102@thomasbrogan9102 Жыл бұрын

  • 2008 Nissan Altima 2.5 do I have to reprogram the throttle after cleaning it or remove the Hose?

    @traviesocuevas3571@traviesocuevas35712 жыл бұрын

  • Go to any Chevy parts dealer they sell stuff called top engine cleaner, it’s the best hands down. A couple drops of this on a microfiber rag and your throttle body and butterfly are golden. Also clean the IAC Valve and MAF Sensor while you are at it using Sensor Cleaner.

    @letsgobrandon8661@letsgobrandon86612 жыл бұрын

    • Seen some KZhead videos using Sea foam and a toothbrush with Great results the Sea foam won't hurt the coated bushings on the throttle shaft

      @1995dresser@1995dresser Жыл бұрын

  • You're so informative and to the point. Subscribed.

    @StillLifeHomocide@StillLifeHomocide2 жыл бұрын

    • Thanks and welcome

      @AliMECH@AliMECH2 жыл бұрын

  • straight to the point vid. I've 07 crv and noticed when engine is idle and I press the gas pedal there's a second delay before it revs not sure what the issue is, or is it normal. Any ideas?

    @lalolalo1233@lalolalo12335 ай бұрын

  • Thank you for your useful tips!

    @baikalkim5324@baikalkim53242 жыл бұрын

    • You are welcome, thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • Great video, you went straight to the point. Thanks a lot bro

    @charlesakaolisa20@charlesakaolisa203 ай бұрын

    • Thanks for watching

      @AliMECH@AliMECH3 ай бұрын

  • Hi Ali, I moved the throttle body by hand, I had not seen your video. How do i test it now?

    @azzamhaq9556@azzamhaq9556 Жыл бұрын

  • Good work. I like this video. It's quick and to the point. Good advice on the proper spray TB cleaner only. I think I can do this myself. My Autozone has the CRC brand cleaner. I will also clean the MAF Sensor with only CRC MAF Sensor spray cleaner.

    @truenexus1usa@truenexus1usa Жыл бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH Жыл бұрын

  • Thank you so much. Direct to the point. :).

    @mickoespanillo6735@mickoespanillo6735 Жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH Жыл бұрын

  • hello do i need idle relearn in this toyota camry which has electric throttle body?

    @omayaali4157@omayaali41572 жыл бұрын

  • Good demo and info thank you… from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

    @melraine919@melraine919 Жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH Жыл бұрын

    • @@AliMECH You’re welcome 👍🏼 🏴󠁧󠁢󠁥󠁮󠁧󠁿

      @melraine919@melraine919 Жыл бұрын

  • Top video, thank you. Just for clarification, did you turn ignition to first notch or turn on the engine fully?

    @neildean7515@neildean75157 ай бұрын

    • The key has to be on ignition position

      @AliMECH@AliMECH7 ай бұрын

  • Thank you. Can we do the same way with honda odyssey 2008?

    @HT-dp6tw@HT-dp6tw2 жыл бұрын

  • Wow! Fantastic video. Thank you.

    @RMalai@RMalai2 жыл бұрын

    • Appreciate that

      @AliMECH@AliMECH2 жыл бұрын

  • Hello 👋 how’s it going I’ll appreciated if you could answer me about this question 🙋‍♂️ when I press the gas pedal my throttle does not open. Is a Hyundai Sonata 2016 2.4 thank you 🙏

    @jesuslopez5494@jesuslopez5494 Жыл бұрын

  • On my 2011 Ford fusion hybrid, the air filter is a lifetime filter under the fender.

    @rgruenhaus@rgruenhaus7 ай бұрын

  • Muito bom!🥇

    @j.f.a5041@j.f.a5041 Жыл бұрын

  • Great job bro 👏

    @tareq7922@tareq79222 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • My 2013 Nissan Sentra 1.8 revs pick up too high with out the acceleration if I give it too much right foot drive it hard . Ok if I drive it gingerly slow . Any advice please I’ve changed transmission fluids and transmission valve body it goes in all gears smooth no noises but can’t accelerate to hard or revs pick up too high . So no rally driving for me right now 😂🤙

    @garrieparsons2265@garrieparsons2265 Жыл бұрын

  • in elctronic throttle body without accelertor cable , if L-N key screw which is hidden in glue type material is messed up with. how can we adjust it to orignal position? do we need to use multimeter to check voltage of sensors at idle and full open throttle? do you know any reference values or can ask any professional who knows the values or procedures? its toyota corolla 2010 model..

    @inamrehman8709@inamrehman8709 Жыл бұрын

  • Thanks for great video. How do you reprogram electronic throttle body?

    @juliustay2541@juliustay25412 жыл бұрын

    • just let it idle for a few minutes or driving on the freeway from 40 mph raise and drop speed or cycle the key in the ignition a few times each car is different for me i just had to idle it for a few minutes

      @kato2182@kato21822 жыл бұрын

  • Hi am having a corsa utitlity bakkie it take time to pickup and need pressure on accelerator pedal

    @munethumultimediaproductio4625@munethumultimediaproductio462510 ай бұрын

  • Very nice thank you for the valuable information, greetings to you

    @ghaithsabah8885@ghaithsabah8885 Жыл бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH Жыл бұрын

  • I bought Motul P1 Carbu Clean a few days ago. It says, start the car and spray the cleaner through throttle. I cleaned my throttle body past with brake cleaner without starting the car. And now my problem is due to cleaning with brake cleaner I think idle air control valve or valve positioning sensor was damaged or the dirt inside throttle was moved to sensor or stuck in the idle air controler somewhere. I wish this Motul product will solve my problems. Here is my question, should I remove the throttle body completely or this is not so necessary? How can clean IAC valve and my positioning sensor? Thanks.

    @selman044@selman0447 ай бұрын

  • Honda Accord euro 2009 2.0 R20A3 just cleaned out whilst ignition on position 2 and weight on gas peddle so butterfly is fully open/closed. After clean, disconnect battery for 15 mins, reconnect with all lights and radio off, go to ignition positon 2 for 2 seconds, then start car, run at 3000rpm for 5 mins or until fan kicks in, and throttle position relearn is all done, set ready to go. Idle rock steady and running sweet 👌😙. This teaches ECU the adjusted position of throttle after it has been cleaned

    @bronniesboy@bronniesboy Жыл бұрын

  • Did you spray it into the electronic throttle body? Because I learned through the Penfoster course I completed, that it is not wise to spray the cleaner directly into the throttle body because it may get into the TPS sensors and may do some damage.

    @carlodonnell146@carlodonnell146 Жыл бұрын

  • Love This Guy!!!!! Always learn something new!!!!!

    @jamesj.litteriojr.433@jamesj.litteriojr.433 Жыл бұрын

    • Thanks James 🙏

      @AliMECH@AliMECH Жыл бұрын

    • The key on/ pedal push method was new to me! I removed mine fully on 2006 Tundra 4.7 and really carefully did open gently, as well as a few on engine cleanups. Seems no harm done, just a clean TB!

      @gratefuldale117@gratefuldale117 Жыл бұрын

  • Thank you your advice is good

    @roadtripper5553@roadtripper5553 Жыл бұрын

  • Thank you for sharing this

    @zanuarrosyidi4034@zanuarrosyidi40342 жыл бұрын

    • You welcome 🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

  • my one is non-cable controlled throttle body. did u just show "ABRO Carb & Choke cleaner" not to use in throttle body? just want to know more side effects. thanks.

    @docker588@docker5882 жыл бұрын

  • Straight up dont be putting your fingers in an ETB. Some have ice breaking cycles amd they WILL sever your fingers.

    @somethingforeveryone4206@somethingforeveryone42062 жыл бұрын

  • On an electric powered throttle before any spraying of the cleaner disconnect the multiplug. No need for ignition to be on. Once multiplug taken off you can move the butterfly valve by hand but slowly. No problem.

    @sydsnott5042@sydsnott50422 жыл бұрын

    • Removing multi plug or removing -ve battery terminal , which one is better ?

      @Fayis1341@Fayis13412 жыл бұрын

    • @@Fayis1341 the multiplug

      @sydsnott5042@sydsnott50422 жыл бұрын

    • @Aidan Bhuiyan I don't understand why my car 2015 Nissan Sentra S won't have the butterfly move/open when the car was in the accessory mode and the gas pedal was pressed down. Thank you in advance for any advice.

      @kimpliny@kimpliny Жыл бұрын

  • Great video brotha! Thanks so much!!!

    @coolceecoolcee3958@coolceecoolcee395810 ай бұрын

    • No problem 👍

      @AliMECH@AliMECH10 ай бұрын

  • Excellent throttle body cleaning video!

    @unebonnevie@unebonnevie3 ай бұрын

    • Glad you liked it!

      @AliMECH@AliMECH3 ай бұрын

  • I did this same cleaning but moved the butterfly by hand. I didn’t use unusual force and hope I didn’t damage it. The car runs better but mpg still not where it should be. Any thoughts.

    @humid-rb7rt@humid-rb7rt2 ай бұрын

  • What if u clean it with another spray and not the one u used ? Can cause check engine light u said ?

    @VivaLaRaza619.@VivaLaRaza619. Жыл бұрын

  • Is CRC throttle body cleaner any different than regular Gumout or all the other carb cleaners?

    @jamesgoforth1606@jamesgoforth1606Ай бұрын

  • So on the electronic throttle body even if the battery is disconnected the plate can't be open by hand?

    @bernabesalgado9636@bernabesalgado9636 Жыл бұрын

  • Good video! I did it to my car and the engine light turned on and then after driving the car for a few minutes, it turned off by itself.

    @jonathanp7184@jonathanp71842 жыл бұрын

    • Thanks, it's OK, maybe you didn't let it dry completely, that's why engine light came on, after driving, it got dry 🙏

      @AliMECH@AliMECH2 жыл бұрын

  • Genius!!!!

    @edlopez5k@edlopez5k2 жыл бұрын

  • Well done wonderful

    @shakali3665@shakali3665 Жыл бұрын

  • ! WARNING ! Remove the throttle body completely to avoid damaging your intake manifold. Throttle body cleaner melts plastic on contact. At least in my engine, there is a plastic cylinder just behind the throttle body lining the intake manifold. If you spray cleaner into the body like this, it will get behind and onto that plastic and will melt the surface. This will make the surface of the cylinder rough and pock-marked, at the least. Furthermore, You won't be able to clean the inner throttle body behind the plate without removing the body. A lot of carbon builds up on the other side of the plate. If you want to see how quickly the cleaner melts plastic, just find a piece of plastic you don't care about damaging and squirt some on it. I dripped some onto a paper towel sitting on some plastic under my hood and it melted the plastic underneath, fusing the paper towel to the plastic in seconds.

    @depth_and_breadth5255@depth_and_breadth5255 Жыл бұрын

  • Nice video. Keep it going.

    @jt8084@jt80842 жыл бұрын

    • Thanks for watching, I will 🙏🏻

      @AliMECH@AliMECH2 жыл бұрын

  • You have to leave key turned on once pedal is pushed down?

    @hotwheel6663@hotwheel6663 Жыл бұрын

  • Thanks,properly made video!

    @4yp6aH8@4yp6aH810 ай бұрын

    • Glad you liked it!

      @AliMECH@AliMECH10 ай бұрын

  • Brilliant video 👏

    @ben_jammin242@ben_jammin242 Жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH Жыл бұрын

  • I got a 2019 chevy malibu 1.5. Its a touch button start up and I got someone to turn the ignition, had them push the gas peddle but the throttle body valve would not open

    @chrismorgan1838@chrismorgan1838 Жыл бұрын

  • Really great video brother. I have LEXUS LS 460 but it’s throttle won’t open even I apply acceleration in ignition mode . Can I open the trottle with my hand a clean inside? Wht about battery negative terminal is it must to remove that ??

    @Fayis1341@Fayis13412 жыл бұрын

    • I am seeing my comment after 8 month still no reply 😂

      @Fayis1341@Fayis1341 Жыл бұрын

  • Great video thank you so much 🇺🇸

    @LunaCycleAZ@LunaCycleAZ Жыл бұрын

    • Glad you enjoyed it

      @AliMECH@AliMECH Жыл бұрын

  • 👏🏼👏🏼 going to my car now.

    @ashleypickle1328@ashleypickle1328 Жыл бұрын

  • Excellent video thank you 🙏

    @richroc7@richroc710 ай бұрын

    • You are very welcome

      @AliMECH@AliMECH10 ай бұрын

  • I don't have scanner to relearn it. I also replaced my crankshaft sensor. Not it's hard to start my car like it wants to turn on but will not. I have to pump gas pedal a lot then it starts. When in drive I can accelerate. Please help

    @jaguarblack4332@jaguarblack43322 жыл бұрын

  • Thank you for the video

    @leomysky@leomyskyАй бұрын

    • No problem

      @AliMECH@AliMECH26 күн бұрын

  • I have an electrical one and the check engine light is on doing this can it fix that ? I plugged a scanner and said it the throttle

    @toetoe6733@toetoe6733 Жыл бұрын

  • Great vid, not drawn out, great advice. If you get a chance to try BG throttle body cleaner, LMK how you like it, I definitely prefer it.

    @k_h_nobody@k_h_nobody Жыл бұрын

    • Thanks! Will do!

      @AliMECH@AliMECH Жыл бұрын

  • Dude , you're straight to the point, efficient and honest. Unlike our American Government. I just subscribed.

    @jwayne777@jwayne777 Жыл бұрын

  • Amazing video!!! Good advice

    @anuruddhadissanayake4881@anuruddhadissanayake48812 жыл бұрын

    • Thanks

      @AliMECH@AliMECH2 жыл бұрын

    • Thanks

      @AliMECH@AliMECH2 жыл бұрын

  • What if I opened the throttle body using my hand while the car was off? I have a 2002 Lexus Es300 that’s idling around 250rpm then stalls. Can’t figured out what’s going on. Recently changed the battery also. Tried “reprogramming” the throttle bottom using the “put in drive while e-brake is on” method and no success. Noticed that when it’s cold, car starts right up, even idles for a minute then dies. When the car is warmer like normal temps, it won’t start unless I feather it some gas but then immediately after I stop feather it gas, it idles at 250rpm then dies. Please help. It has 144k miles.

    @djmechell@djmechell Жыл бұрын

  • Thanks bro!!!

    @bonggenese2438@bonggenese24382 жыл бұрын

    • Any time

      @AliMECH@AliMECH2 жыл бұрын

  • Never, ever stick your fingers in an electronic throttle body with power plugged in. Those things are geared down so much they will cut your finger off.

    @evictioncarpentry2628@evictioncarpentry26282 жыл бұрын

    • are you pulling my leg or something jesus ?

      @Gaspirator@Gaspirator2 жыл бұрын

    • Obviously a troll and definitely not a mechanic or an untrustworthy one. There are always narcissists getting joy by manipulating or taking advantage of other peoples trust. That is why people today are less trusting because individuals like the above are spreading misinformation and getting such a thrill and joy of fooling people that they keep doing it. They create a toxic environment of fear mongering, confusion, lack of trust and being hurt by trusting.

      @crxdelsolsir@crxdelsolsir2 жыл бұрын

    • This is true, coming from a red seal tech. Drive by wire systems you make sure the vehicles battery negative is disconnected.

      @KillaKliff101@KillaKliff1012 жыл бұрын

    • @@KillaKliff101 how do you do this then? Like open it without power on. Going to do this ti my 2012 Ford Focus

      @ThatBoyMichael1@ThatBoyMichael12 жыл бұрын

    • @@ThatBoyMichael1 disconnect battery negative, this insures the plate doesn't move unexpectedly with your fingers in there. I'm sure it's fine on that model to manually move throttle plate for carbon cleaning.

      @KillaKliff101@KillaKliff1012 жыл бұрын

  • Yeah dont clean electric throttle bodies like this. What he showed can damage them plus can hurt you doing that that way. Just take the throttle body all the way off and run a throttle position reset when you hook it up. Most cars its easy and also improves responsiveness from the sensor reset.

    @epp4791@epp47913 ай бұрын

  • Ali I have 2016 Highlander and do I need to change transmission oil? Some people says you never have to.

    @relaxman-tu1tp@relaxman-tu1tp2 жыл бұрын

    • Hello, yes you can change it every 30-60k miles

      @AliMECH@AliMECH2 жыл бұрын

    • @@AliMECH Thanks Ali 👍

      @relaxman-tu1tp@relaxman-tu1tp2 жыл бұрын

  • LOVE IT❤

    @animeangel6863@animeangel68632 ай бұрын

  • Fantastic! Thank you!

    @gracec1665@gracec16655 ай бұрын

    • You're very welcome!

      @AliMECH@AliMECH5 ай бұрын

  • Is it safe to spray all the throttle body cleaner into the electrical throttle body? I watched one other video and it recommends spraying on a clean paper towel and wipe it inside the throttle body because of the electrical components behind the throttle body. Any advice. Thank you.

    @jasonsmith6978@jasonsmith6978 Жыл бұрын

    • i wouldn’t trust spraying that into the hose or valve better spray by on towel and wipe or removed it all together

      @shevyjohn9308@shevyjohn93082 ай бұрын

  • Sorry for this: never, never spray the t.b cleaner directly onto the throttle body itself. The solvent goes through the butterfly shaft and can damage either the TPS circuitry or the throttle by wire electronics. The correct method is spraying a soft shop cloth and then clean the throttle carefully. The best of the best is to remove the throttle and clean it off the engine. That's a more professional way but it takes more time and the job will be more expensive to the costumer.

    @joserodriguez9986@joserodriguez99863 ай бұрын

  • Thanks Bossy Because U Jus Learned Me SumTing New😍😍😍😍

    @delroyjohnson36@delroyjohnson36 Жыл бұрын

    • Glad to hear it

      @AliMECH@AliMECH Жыл бұрын

    • @@AliMECH Respect ✊

      @delroyjohnson36@delroyjohnson36 Жыл бұрын

  • I did exactly as you showed in the video, in my 08 Chevy Aveo, but I noticed that the flap opens very little when the accelerator is pressed. Does that mean I have to replace it?? Pls help! 🥺

    @latentacion8282@latentacion82822 жыл бұрын

    • No, you just need to adjust the throttle body cable, just like i do here: kzhead.info/sun/jdezaNSEh5SEmYk/bejne.html

      @AliMECH@AliMECH2 жыл бұрын

    • @@AliMECH ...Don't think the chevy aveo is a cable controlled throttle body.

      @royquesada5295@royquesada5295 Жыл бұрын

  • Smart trick with torque wrench - this is true re: electronic controlled throttle bodies - they are electronically calibrated and very sensitive. Never force open with hand.

    @stuntdriver2147@stuntdriver21474 ай бұрын

  • Can I spray starter fluid inside a throttle body to make my motorcycle start ?

    @acceptjesuschrist4132@acceptjesuschrist4132 Жыл бұрын

  • When open throttle by making switch on , sure there is check engine light , what you did for that .

    @Khan12652@Khan12652 Жыл бұрын

  • Thanks sir

    @parvezkutub3857@parvezkutub38572 жыл бұрын

  • I used carb cleaner instead. Works.

    @liquidh5226@liquidh52264 ай бұрын
KZhead