CAT 928 Front End Loader Boom Extension Modifications
2021 ж. 18 Қар.
410 239 Рет қаралды
Hey guys. Thank you for your patience and support. Here is a longer more detailed video of some modifications I made to a Boom extension that was meant for another machine. Follow along as I cut off the old mounting ears and fabricate new ones. I hope you're able to pick up some pointers as you kick back and see the process. Grab a bite to eat and relax on the sofa. This is a long one!
It's about the details , I know people that would have made the mount out of the 2 inch and then blamed the customer for not knowing what was needed . It's good to see someone who pays attention to the details .
I have said this before, "You can always tell that how good they are by how easy they make the job look." I really admire your work.
I’m 77 years old, been a heavy mechanic most of my adult life, thought I knew how to cut and weld until I watched you. Hats off to you Sir!
Thanks bud. I appreciate you saying that
I'm 75.... same thing here. These videos are GREAT ! NBS welding is good too (another master).
I'm a a semi retired Millwright and single Dad, so nobody to tell me I can't do :) .. I'm watching this video, while I'm adding parts to my bicycle in the living room. I had to weld a bracket for a chain idler. I'm making it electric drive. Not quite as manly of a job as working with 1 1/2" plate steel though!:)
Your torch cuts are straighter and cleaner then the surgeons hand that worked on my fathers ankle. You’re a true craftsman.
I learned firsthand most surgeons are hacks and most tradesmen are perfectionists
@@tombeauchamp806 I was about to say much the same thing.
I have a more important question why was a surgeon using a torch on his ankle
@@tombeauchamp806 That is absolutely true, doctors are like mechanics and 9 out of 10 of them are totally worthless. Orthopedic surgeons may be book smart but the vast majority of them are not one bit mechanically inclined and have no clue as to what is straight plumb or true. I want a orthopedic surgeon who works with his hands and builds things, no wonder why a large percentage of people who have hip replacements wind up having lrg length discrepancies.
His torch cuts are cleaner than my cuts with a cut off wheel
I didn't remember the beautiful tone when you worked on it with your "tack hammer"!!! Rather like a distant bell. I've always been amazed at the cuts you make with a torch. No slag and parts fall off at the end of the cut. Maestro of the "Blue Wrench"!~!!~~~!!!!!! I did not remember U using the plasma table to cut the part with the O-A. Amazin!!!!
That’s not being lazy, that’s working smart 👍🏼
What I really like about this guy is he makes MAGIC with regular tools. No auto darkening helmet, no super expensive arc air torches, and no special welding chaps/coats. Truly old school magic and thank you bro.
well it takes years of practice, and sometimes less complecated is better when you are doing lots of jobsite repairs like Issac does, after all, I am sure there are things he would love to drag back to the shop to fix, but sometimes its more expediant or too far to drag after all many of these are heavy machine repairs and oil field type things, you got to make it work and work well in the inhospitable job site especially like texas its very warm there and has many environs it holds, after all time is money as they say. In a way I suppose you could say he is like a trama surguon for big machines, you got to be good you got to be fast but you got to make it work and be creative lots of the time, as non textbook things appear all the time with all the oilfield equiptment and harsh hot environ it has to work on. I just like the way he talks very casual and conversational, like a master tv show host on public tv, not an easy day but been at it long enough to know how to do it effecent but not so frantic you mess it up. in effect like an irish grandpa doing his trade and telling a story though I am guessing Issac is prob part native or part latin decent based on his slightly darker skin, face structure and slight accent. this is the usa though anyone could really be any combination of many things though so not much surprises me, I had someone tell me I thought was german decent tell me their family was from, burma or what is called myanmar in the modern days all I know is they man is machine good with a regular oxy torch and knows how to patch machines up and make it work well when it looks like its past the point of all hope and I love his conversational style eh sarry for the discourse, I get kind of wordy my moms italian family had an influance on me lol
He uses the first two in the video and more likely than not has an FR short, so...
Never mind on that arc air one at least, I forgot that's a brand name, the slang term is the other way around
You are so relaxed and it is obvious you have an affinity for teaching. Thanks for letting us watch a craftsman at work.
Great to hear that someone else holds their breath when they run a bead/cut with the torch, catch myself doing that all the time.
I do to. What's that all about?
I do it just so I'm not breathing in that nasty shit any more than I have to
@@KISSMYACE3203 Smart move, time your breathing and wear a respirator.
I don’t think I’ve been so excited for an one hour video, ever!
One of the first things we were ever taught to make (I was a blacksmith/welder at a mine) were some of those long tapered wedges. Our instructor called them 'fox wedges' and us teenagers laughed when he told us we would find them to be the most useful things in our kit. He was right! I see you use them to great effect.
ahhh the old "blink tack" ......brings back memories, you need good trigger finger/eye coordination for that. Trust me, I've seen me do it wrong :D
Smart, not lazy. Takes me around a half hour to get bent enough to tie my boots every morning from lifting things that should have been done with a machine. Pain and experience are great teachers. Unfortunately the pain comes before the experience if you don’t work with good teachers……..
It cracks me up the way you always say "hopefully I can..." Those of us who watch you know darn well you can do whatever you set out to do. It's why we're here. And you're always entertaining. I hope your family knows how much we appreciate them sharing you with us... God has blessed you with great talent, and us with your willingness to share it...
I worked at a heavy equipment dealership years ago and did a fair amount of this sort of thing. I was always amazed at the lack of preheat being done on heavy steel at that location. There were a lot of young welders there and of course you couldn't say anything to them. 🙄 Then stuff started coming back busted and it was figured out. Us old guys didnt have nothing coming back though. I was glad to see you pull the sweat out ou that piece.
Oh!, hello Archie! 😆 😅 😂 🤣
Because the young guys "Know it All already". O I know...till it's broken. I'm the operator fault. I did a super weld... Did you preheat the plate?... Yea yea.. several times...yup I preheated it.. I know that already..😅😅😅
You SIR are an artist. I don’t know what kind of $ you earn for your skill, but you are obviously a man who worth every penny.👍 I wish you continued success!
One thing I really like about you is that you LOOK at the work you're doing. I'm also in repairs and some of these other employees don't even LOOK at what they're working on before they start to work on it.. it drives me insane. You always seem to collect as much info as possible so that you can plan ahead the best way to tackle a problem .
Recently started working at a place that flame cuts a lot of steel. Saw one table cutting 4". 6 inches per minute. I lay out the nests to be cut for the lasers, plasma and torch tables. You adapting your oxi to your plasma table was very creative!
Lol, that hammer looks like a good job for your son. "A learning experience" Watching you cut with a torch is my favorite part of your videos.
The details about the gouging equipment are very much appreciated!
looked like John Henry swingin that hamma !
You really know whatcha doing. Love watching masters of their craft.
You’re the best torch man l have ever seen. Also a great sense of humor.
That plasma table is magic.
BEST MOD I’ve seen with any CnC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Im glad you mentioned holding your breath 🤣 i felt like it was just me because im a naturally tense person
Nice job !!! When you’re working by yourself, being smart is not being lazy.
That WD 40 trick is great.
I wonder if your customers are smart enough to realize how fortunate they are to have your talent in their part of the country! You are the MAN IC.
That's not being lazy, that's being intuitive, being one with the machine. Great video.
Orale!! Issac, you are an artists. When I saw you cut those holes out of that thick steel you very much impressed me. No expensive machines just plain common sense, skills, knowledge and experience at work.
That was not being lazy, that was being smart! It was great see to the end result. Well done!
Exactly!!!
I like how you show not everything is done perfectly once
I like the sound of your Hyster forklift, it brings back many happy memories. Nice fabrication that you did here, neat and well though out.
That was just so awesome to watch you probably hear this all day long but you sir have some serious God given skills!!!!! I liked when you were lifting and lowering with the overhead crane and the forklift!!! And when you wrote “ this is me just being lazy” it actually makes you a better operator!!! So don’t be to hard on yourself! I was really happy that you had the 1 1/2 scrap steel kicking around and watching you cut and your programable cutting unit cut I couldn’t tell the difference!!!! I was so happy you went for a ride and try your pattern saving your self a lot of grief! I even liked meeting Wile I didn’t spell that right but you know what I am getting at! Keep America going Man 😀🇨🇦
I like the fact that this video was over an hour long, better than anything on tv. Cheers.👍👍
Wow! What a craftsmanship! Pieces of art! Well done! 💪👌
Your work is unbelievable and I wonder how much videos help these companies to find you to get this work done. I wish these people who give you a thumbs down would have to explain what they disliked to leave that negative opinion.
I like how you use PAD instead of CAD.....Plywood Assisted Design instead of Cardboard Assisted Design......cheers....
it's really funny in a (good way) when you see (free hand) torch cut 😆 straighter then a steal bench saw 😎 👍🏼
Using the plasma cutting table with oxy was pure genius….I’ve never seen someone so good with a torch
I have to say, I do enjoy the videos that you are a part of in speaking about what your doing and how you are doing it. Much more instructive. Thanks for the great vids. I have learned alot....needless to say 😊
Really well done! It's always good to see your son learning from the master.
Thankyou for your no nonsense videos.. Always learning.
Really like the long videos. As usual, beautiful work.
You have a good eye for square and a very steady hand. Good job Brother!!!
Thank you Isaac. Wonderful job. Wylie was looking for the road runner.LOL.
Great old school welding.....plus you have The Greatful Dead playing!!!
That's a kick ass plasma cutter, smooth cuts.
That "Ta Daa !!" cracked me up. Glad you didn't get hurt.
That whole sequence made me smile.
Thanks IC, Been telling folks it is nice to have a couple of small driving wedges, instead of trying to use big chisels that do not have enough angle to split stuff apart without ruining the assemblies. I keep a couple of sets that I found inexpensive to keep around. Thanks for the cnc torch work. Maybe plot a drill hole in the center as your origin, then do the outer circle plot from the centerline plot.
You are not being lazy. I just had two vertebrae fused in my back as I didn’t work smart when I was younger
Watching the bevels cuts from Townsville Australia💯👌👌
Really nice vlog, using different equipment, little road trip and fitment! Nice job 👏 👍 👌
Another great video, I could watch these for hours !!!
Probably your best video to date. The road trip bit, was very VGG esq. I really enjoyed seeing the fitment on the machine and adjustments/modifications you did on-site. Your forklift skills are pretty good too.
PERRSONALLY, I LOVE THE LONGER VIDEOS, I LIKE YOU SHOWIN TO PREHEAT THE METAL, I'M 59, AND ONLY LEARNED THAT 3-4 YEARS AGO , LOVE THE CHANNEL/PAGE
Your the man. You've shown the correct process to make a drawing and mock up to test the fit first. Way to go.
So cool seeing a CNC cutting torch
Such a 👏 good job! Love watching all your channels and your expertise IC! Keep up the good work and thanks so much for sharing them.
Always a pleasure watching your videos
Fantastic video thanks an amazing experience watching a master at work
No not being lazy working smarter. I love watching your videos.
Love how the workers are admiring the work! I bet they thought there was no way until IC Welding took the Job!
PROPER! Isaac. Another Quality dress right dress spot on Fabrication and weld job! Really love that your son is by your side and learning from the Master! ⭐️⭐️⭐️⭐️⭐️🙏💙
Great Job! Not many people have ever lifted a 16 pound hammer! I did in my day being a well Driller!
Love the videos. Showed me a few trick and tips thats helped out. Especially the broke bolt trick. Would really like to see a tour of how you have your truck setup with a tour of the boxes.
I just wanted to say thank you for your videos on here! Your calm demeanor has helped me with some jobs that i do as a handyman welder here in Australia! Most jobs are straight forward and the people i deal with are pretty cool for the most part and it's so satisfying to work with them and get the job done. Other jobs however are a nightmare especially undoing someone else's work.... when i'm presented with a problem like that i remember your words "it's only metal and we can fix it" :)
You are amazing! I look forward to your posts and am happy when they come! Keep on working and teaching all of us that follow!
You and the torch are one! Your work is amazing. A true professional
“Pretty good”?????? A terrible understatement. Masterful!!! 👏👏👏👏
In the words of Nick Bezates “ it’s just reverse welding”…. Well done sir. 🤘
Pretty much!
@@ICWeld carve it out, burn it back ... we’ll done sir !
Slick trick using the plasma table. IC is never afraid to try new ideas, that's how things advance to a better way. Excellent fab/weld skills and learning video, thanx.
This guy is good!!! That gouging is so perfect.
Beautiful fabricating skill great guys like you are still in America so great to see
Looking Great enjoyed watching you build stuff Wonderful job.
Hi, Mr Cruz. This is as good as being taught by my grandfather.
I like your music choices and your laid back demeanor!
That has got to be the “BFH”I have ever see anyone swing. Better you than me my friend, a hammer that size would have me taking the rest of the day off! Well done.
Isaac, you sure gathered a crowd when you mounted the extension on the loader. Thanks for sharing your process.
One way you could do the hole with the CNC would be to pre-drill the starter hole (or, flash it out yourself). That way, you can start the program, as if it were an edge, and simplify the whole thing that way. Gotta say, have never seen a CNC torch before. Have seen laser, have seen water+garnet, plasma, never torch, yet...it makes so much sense!!! :))
If you want to see CNC torching go to Peddinghaus and look at their coper, I used to run and program those. I also ran Peddinghaus drill lines and program those too. They make a whole lot of videos that I'm sure you can find on youtube as well. The suggestion you made about pre-drilling the hole is what I used to do, I'd have the drill put a 13/16”, pilot hole drilled into 14”x500 or 14”x700 columns before trying to cope their 2.125” lifting hole in the web of the column.
can't believe you made it to the second side before you knocked it off the jack stands. was sure you were gonna knock it off on the first one.
LOL, I spent more time watching the jack stands move than the hammer...
Beautiful work
Forever learning something new
Another great video that always answers the question on just how do you do it… Take care my friend…
IC gets big style points with that torch in hand... he has the groove going🥽🥽🥽🥽📐📐📐📐📐📐🔨🔨🔨🔨🔨🔨👍👍👍👍👍👍👍👍👍👍
You are badass with a torch. The best I’ve ever seen
I learn from you every video, thank you!
Thank you for the video. Nice and clean job.
Very enjoyable hour spent! Thank you.
the anxeity I was feeling while you hammered on the second hook was too much... "Wait for it..." You sir are an expert, and clearly welcome dangers shake. Hats off to you :)
Awesome job! A true craftsman!
Outstanding work, very clean and perfect as always!!
Its amazing how effortlessly you work with large/thick metal!
Great job as always
Great video,nice work.
Really enjoyed this long one Isaac!
Very nice job as always.
Great job. Really enjoyed the video.