You know it’s a good day when machinery restorer uploads
@Acegaming4910 ай бұрын
And twice in one week! Might have to go and buy a lottery ticket lol!
@gforcekaras10 ай бұрын
And this one looks like he got it for free because of it’s shape, many use free as click bait sadly.
@retro869610 ай бұрын
Yep
@TheOneEyedWitchandAMouse343210 ай бұрын
@@gforcekarasExactly!
@RazvanYON10 ай бұрын
Only if the upload is a restoration video, not a shitty "Can I fix it" or "Will it start".
@Dustmadeout10 ай бұрын
Love the custom work on that deflector, plus it is great to see another ride on mower up and running, keep up the great work 😃👍
@ksaab394610 ай бұрын
It was fun watching this little mower brought back to life. Watching you work and your explaining in detail has helped me not bot be afraid to tackle my own mower mechanical problems.
@raywood818710 ай бұрын
Having done small engine repair, I recognize that eng as being basically a push mower engine, albeit a higher end engine as it has electric start. That one turned out a treat
@Farm_fab10 ай бұрын
I was thinking the same thing lol 6.5 hp is nothing for a rider guess things are different across the pond
@tylerfrankel537410 ай бұрын
@@tylerfrankel5374 I remember VW detuning a Porsche engine they put in the Transporter van. Barely 60 HP on the wasserbox engine. I could never figure that out.
@Farm_fab10 ай бұрын
@@tylerfrankel5374 many of the little riders here in the US use similar engines, but the larger rear engine riders are more common.
@M.TTT.9 ай бұрын
Another winning video, nifty piece of kit. When I first saw it I thought it might not be much good at actually cutting. I imagine that the previous owner was less than impressed with blade fitted upside down. An impressive restoration
@kensherwood486610 ай бұрын
i just want to take a moment to thank you. thanks to your videos i learned the necessairy techniques to repair our old riding-lawnmower with a honda engine, we had enjoyed riding around but had been left outside for a few years. through your videos ive been motivated to try and fix it, so i went outside and tried to start it, but it wouldnt. after a carb clean it would start but only for about a minute though sounding very rough. later i found out that he lost spark when getting warm, was given another ignition coil by a friend of my father, who like you repairs lawnmowers. now it runs very well and we can enjoy riding it again. thank you.
@JohnL_S1710 ай бұрын
Nice job with the deflector, and with that short wheelbase it comes close to a zero-turn mower also! Thx for showing! 👍👍👍
@horstszibulski1910 ай бұрын
Daggerwin another great video!! Thank you for sharing with us. I love watching all your videos you explain your steps so well!
@fatherofsixwackykids207410 ай бұрын
That's a nifty little mower. Glad you were able to get it working again. Reminds me of a modern day Snapper rear engine lawnmower.
@MarkMeadows9010 ай бұрын
Very cool, turned out great. Very simple fix, i agree the “ride on push mower”. Very good name for those, they’re becoming quite popular here in the states as well.
@loranzobaker729310 ай бұрын
They’re really not and there’s only 2 on the market priced higher than a 42” deck mower.
@sideburns200910 ай бұрын
Hey Daggerwin, where do you find the machinery you restore. I am building a workshop where I hope to do a similar thing to you as in restoring machinery etc but I can't seem to find any good deals. Love the videos, well done!!😀😀
@edwardkay10 ай бұрын
Great video, great photography and editing, clear narration. And a great finished result. One of the best I've seen on KZhead. Thank you.
@nevillemorgan82679 ай бұрын
That mower came back to life nicely! There is a hole in the deck that you should patch up also as grass was blowing out of there pretty good at times.
@hardies110 ай бұрын
I look forward to your videos, decent little machine you got for free. I really liked how you made the deflector work good job all around. Thanks my friend 😊
@WisconsinWanderer10 ай бұрын
Beautiful restoration mister good job well done
@vinceianni402610 ай бұрын
I always quite enjoy these videos you upload, they're quite satisfying to watch, and allow me to see the process of getting something running when I've run out of things to get running again
@diarrhea_fart10 ай бұрын
Thanks for another great video. I always look forward to your next video.
@jamesdavis412410 ай бұрын
Hey man. I just found your channel and I am hooked. Absolutely love your content, you've got a subscriber for life. I want to start my own small engine and mower repair shop so I look at you as a mentor.
@johnnicastro59319 ай бұрын
Back in 1980 my brother brought home a 5hp Briggs 24" "Ride on" Lawnscout lawnmower brand new. Store was going out of business. I'm 6'2 tall, I mowed my parent's house for at least 15yrs. Mower stop running one day, took spark plug out ground electrode was worn almost completely off. PS had just forward , neutral and reverse and 4 non-puenmatic tires, no flats. that was one tough mower! Good luck and thanks for sharing 👍
@tcmits369910 ай бұрын
Nice work. Well done. 👍
@trevorpearson183210 ай бұрын
Excellent, as usual Sir👍👍👍
@AZVIDS9 ай бұрын
I love a machinery restorer and can't wait to see the how it turns out.👍 good video.
@christopherbignell334210 ай бұрын
Interesting mower so light. Ideal for small yards. As always I enjoy your videos.
@terryl787410 ай бұрын
My grandad has one of these. I’ve got some good memories of helping mow the law on it.
@2_Spanners10 ай бұрын
Great video and nice job on the deflector.
@johnmcenaney181410 ай бұрын
Bonus video. Thank you.
@mikesbarn185810 ай бұрын
Nice job as always. Love your videos!
@daleyurk436910 ай бұрын
Great resuscitation!
@arthurbiringer56769 ай бұрын
Wooh! Looking forward to watching them. Question, What do you end up doing with all of the mowers/tractors you've restored?
@kiger36310 ай бұрын
Excellent job!
@Castleknight10 ай бұрын
What a cool little machine. Cheers from Canada.
@alveus820510 ай бұрын
A very well done job!
@user-rt2ph2ly7g10 ай бұрын
Great video. The rear grass discharge is a nice feature.
@sgnt933710 ай бұрын
Another great job, cheers
@francispalmer973710 ай бұрын
From across the pond. My friend from St. Ouen, Jersey and I do the same thing. She locates them, I retrieve and repair, while she does "the hair and make-up", appearance sells. Seems that we had a similar unit here, referred to as the "doodle bug", no relation the one from the 40s Thanks. Narragansett Bay
@jebsails28377 ай бұрын
It's really good U got it running again and cool deflector that mower like a little gokart
@GorgeyWoofy-jb3ip9 ай бұрын
Great video bringing it to life 🙌 keep uploading videos please
@g57675810 ай бұрын
Great find and another great Job. That would be my ideal mower for someone unable to use a push mower any more.
@jerrybootneck173610 ай бұрын
Trust me... You can throw the bloody thing further than you think.
@ricande10 ай бұрын
@@ricande with scars on my lungs, I doubt I could even lift it today.🤣
@jerrybootneck173610 ай бұрын
A day late but still enjoyed this vide a lotr. It always a good thing bringing something once disgarded, back to life. Well done.
@DancerOfClouds10 ай бұрын
Neat little mower and I like the deflector but I would cut the left leg off and make the right one a few inches longer. The shroud near the blade on the right side just below the shifter has a hole through it. And I really dig your little welding machine 👍
@damnoldguy10 ай бұрын
Nice job! The carburetors on those Briggs Intek engines are notorious for passing fuel and contaminating the crankcase oil due to the poor design (no outward pitch or fuel weep hole). It’s usually best to put a fuel shutoff valve in the supply line and close it after use. Neat little rider, I like the discharge chute deflector too!
@mjg26310 ай бұрын
Great and entertaining video. When i put a new tube in the wheel i always inflate it a little before i fix the tyre. This way the tube sets correctly inside the tyre.
@oldcornerSE10 ай бұрын
Nice video, I enjoyed it. It certainly does cut well.❤❤
@garycoppard359610 ай бұрын
Top Job well done
@Johnny1678110 ай бұрын
Great video rear deflector worked great 👍
@AJPsWorkshop10 ай бұрын
Indeed. The deflector is the only thing that will work on this god damned machine in 6 months. (I have the same model)
@ricande10 ай бұрын
Nice. As silly as those little mowers are I love the simplicity of the design. All you really need for a small yard without much slope.
@porticojunction10 ай бұрын
Great video as always. As an observation only, I'd try a smaller deflector at less of an angle-one that would allow the grass to disperse/fall more "naturally" i.e., no clumpy lines.
@DanKoning77710 ай бұрын
For the year of the mower it looks great. I always show from start to finish.
@Shagnasty10 ай бұрын
Fantastic work! I really enjoy these videos. Now I just wonder am I the only one who noticed those big holes on side of the deck/shoot...
@Mike8111110 ай бұрын
🤣😂 **gigglesnortgiggle** 😂🤣 It looks like a geriatric mobility scooter 😋😏 Thumbs Up on the revival of this goofy looking mower ..Very Well Done ! 👍👍 😇❤❤❤❤❤❤❤❤❤❤❤❤
@angeldawnmorningstar10 ай бұрын
That honestly mows a lot better than I was expecting for something that tiny!
@komitadjie10 ай бұрын
Fantastic video! That has to be the smallest riding mower I have ever seen. If your having issues with it starting right away, check the valve lash. Those intek engines are notorious for the valve lash to go out of spec which makes them hard starting.
@buddylee699610 ай бұрын
Currently have Stiga version in the workshop. A mobility scooter with a cutter blade. Easier to take the whole engine and deck out and work on it on the bench.
@tonyharding196110 ай бұрын
A loose tea holder for your cupper in the mornin' works great for all the wee parts you put into the sonic washer.
@oldenslo414110 ай бұрын
THANKS YOU VERY MUCH
@agungbudiarto61839 ай бұрын
Well done!
@woodhonky389010 ай бұрын
Nice job, really like the deflector. Changing the belts on those is a pig of a job, got lucky on that one
@MrFigFisher10 ай бұрын
Nice job 👍
@mully89Ай бұрын
Excellent video Machinery Restore :) and yes that cool Lawn Tractor Mower never seen one blade but lots 2 or 3 blade ones and not that make! On home in my childhood years in 1980's my uncle Bill bought one used model to use home farm for 2 flat ditches also farm house and house trailer to cut grass was 5 acres worth each week! The one had was 1970's of lime green called Aries Built by Firestone with 42 bed 2 blades with 8 hp Briggs & Stratton 8 hp no electrical start or headlights also Synchmatic transmission daul pedal plus handle with under seat Foward left , middle Netural, right was Reverse ! 1 litre of Engine Oil 10w30 type no Engine Oil filter was strange and fuel tank 2 gallon only in plastic tank! Sat over engine too ! To shut off engine was choke and throttle lever ! Start in Netural gear lever plus handle in Park section with Throttle to Choke when start put slow and but want deck put fast postion in middle only needed! Was fun to drive and used too! So cool like this one !
@AndrewHCann10 ай бұрын
Thank you for the video
@liljoeii609110 ай бұрын
really well shot video well done
@mcbrothers280010 ай бұрын
Much luck with your find great job most this side wouldn't bother with it only those in need be safe Peace
@grahammctygue72410 ай бұрын
That is the English cousin of the m.t.d yard bug love the way the engine is in front instead of the back but it is in the right place to get it fixed and running again
@robertmailhos815910 ай бұрын
Bit of a hole in the deck. Will you tackle that, too? Great job and thank you for explaining your trouble shooting
@fjrkev10 ай бұрын
If I didn’t live in the US I’d totally buy that from you. Sized quite nicely for our yard.
@thomas752910 ай бұрын
It's just like I dreamt it could be 😊😊😊. Mr. Machinery Restorer uploading with less than a week in between. Life is complete 😁. Next step - one every day 😂😂😂. Great stuff dude. As ever. Lovely bit of fab work on the grass plate 👏👏👏. 😎
@johnbradford923510 ай бұрын
This is the cutest mower ever ❤❤ love it
@SDS-110 ай бұрын
what a good little mower and gets the job done very well
@johnnewson503910 ай бұрын
Excellent work as always 👍🏻. Just a heads up you installed the seat upside down. I only know because I’ve done it myself before 👍🏻
@hester78110 ай бұрын
Awesome video! I noticed the deck has a rust hole on the right side.
@Silverpup7810 ай бұрын
Nice wee mower 👍
@uabhar721510 ай бұрын
You sir have solved a mystery, I was given a B&S engine, there were no makings on it anywhere. I hunted on the internets, asked on the forums as to what engine it was. What you show here is what appears to be the same engine that I have. I now know what model to say when I am looking for parts (namely head gasket) Mystery solved.
@MegaDirtyberty10 ай бұрын
That would fit my yard wonderfully. Reminds me of the long gone Yard Bug.
@mg1342mg10 ай бұрын
A nice little mower!
@davidfist780110 ай бұрын
I got one of those oil extractors recently....best investment I have made in tools.
@f62darkstar9 ай бұрын
Great video as usual, please do a video on a small zero turn , thank you
@dexflexcrites779710 ай бұрын
great video. love watching your videos. :)
@warrenvalentino576310 ай бұрын
The little mower operated very well.
@eddiepatterson502510 ай бұрын
On ours it has a tube for the bagging system and we just cut a hole in a pan that fit over the tube snugly and it works but it does leave a mess
@aron885810 ай бұрын
Brilliant video
@thundercat964210 ай бұрын
I enjoy your videos! Just wondering, do you time the vids when that area needs mowing? LOL
@thomaslyon211210 ай бұрын
I really enjoyed this video as I have same mover but your seems to be in good condition compared to mine.
@martinm838010 ай бұрын
Mke sure and patent that deflector. Seems to work well if you don'thappen to have the catch clippings container.
@doylefrost431410 ай бұрын
This was great! I have to admit, I would have loved to see how it would have mowed without that custom grass deflector 🙂
@nathangillmore506410 ай бұрын
good job well done
@harryburford662910 ай бұрын
Not to shabby , nice
@maintenanceman101510 ай бұрын
Great work daggerwin love all your videos and I watch all your fs22 and fs19 videos
@IestynWilliams-sd7ek9 ай бұрын
I was wondering if you were going to fix that hole that's in the mower deck?
@picklesgherkin10 ай бұрын
Oh boy, I have 2 of those both rebrands of yours (Stiga and Texas) and I hope for you that the clutch for the moverblads never breaks for you. It is expensive, and should I have to change mine I'm thinking about modifying a electro engaging clutch to fit instead.
@Mylifeintechnicolor9 ай бұрын
Cute little mower.
@forthwithtx585210 ай бұрын
grouse work mate she looks lovely and i,m not sure if we had a Victa Ride on Mower very similar to that one back in at least the 1970s or 1980s but yeah very good machines from what i was told back then too and cheers from Australia 🐨🐑🦘🌴🇦🇺🌏 or the land down under to your area and keep cool during your Summer while we are keeping toasty here as best as possible etc.
@Patrick495910 ай бұрын
For small mower that's a very nice cut
@richardpresley85110 ай бұрын
Where do you get all these old mowers and ride ons? Ive allways wanted to get one.
@OllyAv899 ай бұрын
I wish someone would give me a free rider! When someone offers something for free it's usually FUBAR! You definitely got a good one there.
@Herbybandit10 ай бұрын
Simply Green is a good choice to use in the Ultrasonic.
@tubeDude4810 ай бұрын
i was a lawnmower mechanic in the 70s for a major catalog store. one customers brought in his top-of-the line riding mower. when i checked the oil, a gas/oil mix poured out. i disassembled the carb and found a pinhole in the brass float. when i pulled the head, the cylinder was scored badly and the engine was ruined. i told the store manager to get him a new mower, but she didn't want to. she bought his mower and took it home only to find it was ruined just as i had said. you should leave all the plastic crap off as it is not necessary.
@nathanmoak151510 ай бұрын
my guess would be the float got stuck on the carb and they parked it when they smelled fuel in the oil because it also makes it smoke like crazy (had a mower with the same issue and it smoked like crazy and we got it for free too)
@myacidninjatheamazing10259 ай бұрын
Barrrrr! I enjoyed this so much I want one like that. Love your welding skills m8. 🇬🇧bri
@briand728510 ай бұрын
Now you could have posted this two weeks ago haha! Just fixed the same one for my dad. It had a dicky fuse carrier on the pcb board in the grey box. 👍🏻👍🏻 Now just not starting on the key when it’s got. But that shouldn’t be a big issue
You know it’s a good day when machinery restorer uploads
And twice in one week! Might have to go and buy a lottery ticket lol!
And this one looks like he got it for free because of it’s shape, many use free as click bait sadly.
Yep
@@gforcekarasExactly!
Only if the upload is a restoration video, not a shitty "Can I fix it" or "Will it start".
Love the custom work on that deflector, plus it is great to see another ride on mower up and running, keep up the great work 😃👍
It was fun watching this little mower brought back to life. Watching you work and your explaining in detail has helped me not bot be afraid to tackle my own mower mechanical problems.
Having done small engine repair, I recognize that eng as being basically a push mower engine, albeit a higher end engine as it has electric start. That one turned out a treat
I was thinking the same thing lol 6.5 hp is nothing for a rider guess things are different across the pond
@@tylerfrankel5374 I remember VW detuning a Porsche engine they put in the Transporter van. Barely 60 HP on the wasserbox engine. I could never figure that out.
@@tylerfrankel5374 many of the little riders here in the US use similar engines, but the larger rear engine riders are more common.
Another winning video, nifty piece of kit. When I first saw it I thought it might not be much good at actually cutting. I imagine that the previous owner was less than impressed with blade fitted upside down. An impressive restoration
i just want to take a moment to thank you. thanks to your videos i learned the necessairy techniques to repair our old riding-lawnmower with a honda engine, we had enjoyed riding around but had been left outside for a few years. through your videos ive been motivated to try and fix it, so i went outside and tried to start it, but it wouldnt. after a carb clean it would start but only for about a minute though sounding very rough. later i found out that he lost spark when getting warm, was given another ignition coil by a friend of my father, who like you repairs lawnmowers. now it runs very well and we can enjoy riding it again. thank you.
Nice job with the deflector, and with that short wheelbase it comes close to a zero-turn mower also! Thx for showing! 👍👍👍
Daggerwin another great video!! Thank you for sharing with us. I love watching all your videos you explain your steps so well!
That's a nifty little mower. Glad you were able to get it working again. Reminds me of a modern day Snapper rear engine lawnmower.
Very cool, turned out great. Very simple fix, i agree the “ride on push mower”. Very good name for those, they’re becoming quite popular here in the states as well.
They’re really not and there’s only 2 on the market priced higher than a 42” deck mower.
Hey Daggerwin, where do you find the machinery you restore. I am building a workshop where I hope to do a similar thing to you as in restoring machinery etc but I can't seem to find any good deals. Love the videos, well done!!😀😀
Great video, great photography and editing, clear narration. And a great finished result. One of the best I've seen on KZhead. Thank you.
That mower came back to life nicely! There is a hole in the deck that you should patch up also as grass was blowing out of there pretty good at times.
I look forward to your videos, decent little machine you got for free. I really liked how you made the deflector work good job all around. Thanks my friend 😊
Beautiful restoration mister good job well done
I always quite enjoy these videos you upload, they're quite satisfying to watch, and allow me to see the process of getting something running when I've run out of things to get running again
Thanks for another great video. I always look forward to your next video.
Hey man. I just found your channel and I am hooked. Absolutely love your content, you've got a subscriber for life. I want to start my own small engine and mower repair shop so I look at you as a mentor.
Back in 1980 my brother brought home a 5hp Briggs 24" "Ride on" Lawnscout lawnmower brand new. Store was going out of business. I'm 6'2 tall, I mowed my parent's house for at least 15yrs. Mower stop running one day, took spark plug out ground electrode was worn almost completely off. PS had just forward , neutral and reverse and 4 non-puenmatic tires, no flats. that was one tough mower! Good luck and thanks for sharing 👍
Nice work. Well done. 👍
Excellent, as usual Sir👍👍👍
I love a machinery restorer and can't wait to see the how it turns out.👍 good video.
Interesting mower so light. Ideal for small yards. As always I enjoy your videos.
My grandad has one of these. I’ve got some good memories of helping mow the law on it.
Great video and nice job on the deflector.
Bonus video. Thank you.
Nice job as always. Love your videos!
Great resuscitation!
Wooh! Looking forward to watching them. Question, What do you end up doing with all of the mowers/tractors you've restored?
Excellent job!
What a cool little machine. Cheers from Canada.
A very well done job!
Great video. The rear grass discharge is a nice feature.
Another great job, cheers
From across the pond. My friend from St. Ouen, Jersey and I do the same thing. She locates them, I retrieve and repair, while she does "the hair and make-up", appearance sells. Seems that we had a similar unit here, referred to as the "doodle bug", no relation the one from the 40s Thanks. Narragansett Bay
It's really good U got it running again and cool deflector that mower like a little gokart
Great video bringing it to life 🙌 keep uploading videos please
Great find and another great Job. That would be my ideal mower for someone unable to use a push mower any more.
Trust me... You can throw the bloody thing further than you think.
@@ricande with scars on my lungs, I doubt I could even lift it today.🤣
A day late but still enjoyed this vide a lotr. It always a good thing bringing something once disgarded, back to life. Well done.
Neat little mower and I like the deflector but I would cut the left leg off and make the right one a few inches longer. The shroud near the blade on the right side just below the shifter has a hole through it. And I really dig your little welding machine 👍
Nice job! The carburetors on those Briggs Intek engines are notorious for passing fuel and contaminating the crankcase oil due to the poor design (no outward pitch or fuel weep hole). It’s usually best to put a fuel shutoff valve in the supply line and close it after use. Neat little rider, I like the discharge chute deflector too!
Great and entertaining video. When i put a new tube in the wheel i always inflate it a little before i fix the tyre. This way the tube sets correctly inside the tyre.
Nice video, I enjoyed it. It certainly does cut well.❤❤
Top Job well done
Great video rear deflector worked great 👍
Indeed. The deflector is the only thing that will work on this god damned machine in 6 months. (I have the same model)
Nice. As silly as those little mowers are I love the simplicity of the design. All you really need for a small yard without much slope.
Great video as always. As an observation only, I'd try a smaller deflector at less of an angle-one that would allow the grass to disperse/fall more "naturally" i.e., no clumpy lines.
For the year of the mower it looks great. I always show from start to finish.
Fantastic work! I really enjoy these videos. Now I just wonder am I the only one who noticed those big holes on side of the deck/shoot...
🤣😂 **gigglesnortgiggle** 😂🤣 It looks like a geriatric mobility scooter 😋😏 Thumbs Up on the revival of this goofy looking mower ..Very Well Done ! 👍👍 😇❤❤❤❤❤❤❤❤❤❤❤❤
That honestly mows a lot better than I was expecting for something that tiny!
Fantastic video! That has to be the smallest riding mower I have ever seen. If your having issues with it starting right away, check the valve lash. Those intek engines are notorious for the valve lash to go out of spec which makes them hard starting.
Currently have Stiga version in the workshop. A mobility scooter with a cutter blade. Easier to take the whole engine and deck out and work on it on the bench.
A loose tea holder for your cupper in the mornin' works great for all the wee parts you put into the sonic washer.
THANKS YOU VERY MUCH
Well done!
Nice job, really like the deflector. Changing the belts on those is a pig of a job, got lucky on that one
Nice job 👍
Excellent video Machinery Restore :) and yes that cool Lawn Tractor Mower never seen one blade but lots 2 or 3 blade ones and not that make! On home in my childhood years in 1980's my uncle Bill bought one used model to use home farm for 2 flat ditches also farm house and house trailer to cut grass was 5 acres worth each week! The one had was 1970's of lime green called Aries Built by Firestone with 42 bed 2 blades with 8 hp Briggs & Stratton 8 hp no electrical start or headlights also Synchmatic transmission daul pedal plus handle with under seat Foward left , middle Netural, right was Reverse ! 1 litre of Engine Oil 10w30 type no Engine Oil filter was strange and fuel tank 2 gallon only in plastic tank! Sat over engine too ! To shut off engine was choke and throttle lever ! Start in Netural gear lever plus handle in Park section with Throttle to Choke when start put slow and but want deck put fast postion in middle only needed! Was fun to drive and used too! So cool like this one !
Thank you for the video
really well shot video well done
Much luck with your find great job most this side wouldn't bother with it only those in need be safe Peace
That is the English cousin of the m.t.d yard bug love the way the engine is in front instead of the back but it is in the right place to get it fixed and running again
Bit of a hole in the deck. Will you tackle that, too? Great job and thank you for explaining your trouble shooting
If I didn’t live in the US I’d totally buy that from you. Sized quite nicely for our yard.
It's just like I dreamt it could be 😊😊😊. Mr. Machinery Restorer uploading with less than a week in between. Life is complete 😁. Next step - one every day 😂😂😂. Great stuff dude. As ever. Lovely bit of fab work on the grass plate 👏👏👏. 😎
This is the cutest mower ever ❤❤ love it
what a good little mower and gets the job done very well
Excellent work as always 👍🏻. Just a heads up you installed the seat upside down. I only know because I’ve done it myself before 👍🏻
Awesome video! I noticed the deck has a rust hole on the right side.
Nice wee mower 👍
You sir have solved a mystery, I was given a B&S engine, there were no makings on it anywhere. I hunted on the internets, asked on the forums as to what engine it was. What you show here is what appears to be the same engine that I have. I now know what model to say when I am looking for parts (namely head gasket) Mystery solved.
That would fit my yard wonderfully. Reminds me of the long gone Yard Bug.
A nice little mower!
I got one of those oil extractors recently....best investment I have made in tools.
Great video as usual, please do a video on a small zero turn , thank you
great video. love watching your videos. :)
The little mower operated very well.
On ours it has a tube for the bagging system and we just cut a hole in a pan that fit over the tube snugly and it works but it does leave a mess
Brilliant video
I enjoy your videos! Just wondering, do you time the vids when that area needs mowing? LOL
I really enjoyed this video as I have same mover but your seems to be in good condition compared to mine.
Mke sure and patent that deflector. Seems to work well if you don'thappen to have the catch clippings container.
This was great! I have to admit, I would have loved to see how it would have mowed without that custom grass deflector 🙂
good job well done
Not to shabby , nice
Great work daggerwin love all your videos and I watch all your fs22 and fs19 videos
I was wondering if you were going to fix that hole that's in the mower deck?
Oh boy, I have 2 of those both rebrands of yours (Stiga and Texas) and I hope for you that the clutch for the moverblads never breaks for you. It is expensive, and should I have to change mine I'm thinking about modifying a electro engaging clutch to fit instead.
Cute little mower.
grouse work mate she looks lovely and i,m not sure if we had a Victa Ride on Mower very similar to that one back in at least the 1970s or 1980s but yeah very good machines from what i was told back then too and cheers from Australia 🐨🐑🦘🌴🇦🇺🌏 or the land down under to your area and keep cool during your Summer while we are keeping toasty here as best as possible etc.
For small mower that's a very nice cut
Where do you get all these old mowers and ride ons? Ive allways wanted to get one.
I wish someone would give me a free rider! When someone offers something for free it's usually FUBAR! You definitely got a good one there.
Simply Green is a good choice to use in the Ultrasonic.
i was a lawnmower mechanic in the 70s for a major catalog store. one customers brought in his top-of-the line riding mower. when i checked the oil, a gas/oil mix poured out. i disassembled the carb and found a pinhole in the brass float. when i pulled the head, the cylinder was scored badly and the engine was ruined. i told the store manager to get him a new mower, but she didn't want to. she bought his mower and took it home only to find it was ruined just as i had said. you should leave all the plastic crap off as it is not necessary.
my guess would be the float got stuck on the carb and they parked it when they smelled fuel in the oil because it also makes it smoke like crazy (had a mower with the same issue and it smoked like crazy and we got it for free too)
Barrrrr! I enjoyed this so much I want one like that. Love your welding skills m8. 🇬🇧bri
Now you could have posted this two weeks ago haha! Just fixed the same one for my dad. It had a dicky fuse carrier on the pcb board in the grey box. 👍🏻👍🏻 Now just not starting on the key when it’s got. But that shouldn’t be a big issue
Love your vids!