Minwax Antique oil finish for Fast Easy Gunstock Refinish . Beautiful Satin or Gloss Finish step by step.
Пікірлер
Guys click the link below to help me keep my channel sponsor free !! Thanks in Advance . www.paypal.me/JoeWayneRhea
@CyclopsJoeVideos6 жыл бұрын
Beautiful finish ! I’ve watched this video several times and wondered if this would work on a lighter colored laminated stock(green, tan, black& brown? I think). I’m concerned that the sanding might create a slurry which would dull/stain the definition of the laminated wood. Have you ever done this before on a laminated wood or if not what would you suggest. Thank you for all your informative videos. I don’t have a pay pal account what other options do you have.?
@charlesrhea6810 Жыл бұрын
This really works. the video doesn't allow viewers to appreciate the true texture and feel of the finished wood, I used this process on a custom black cherry thumb hole stock I made and was amazed how well it turned out. The only thing that was different for my job was using #1200 paper on the last sanding versus 1000 (since I couldn't find any). I showed the stock to several fellow gun enthusiasts and they were equally impressed. The stippled areas got the wipe on, wipe off treatments as described in the video, and they turned out very well too. Thanks so much for posting this method!
@davidcampbell9856 Жыл бұрын
Thanks man
@CyclopsJoeVideos Жыл бұрын
Good Morning Joe; I am on a muzzleloader Hawken build. I first finished the Hawken stock with a boiled linseed oil which turned out badly. It never would harden. The stock felt tacky and would not dry and cure. After looking at you videos of the Minwax Antuque Oil Finish I ordered a pint and after spending 3 days on removing the old finish, I started the AOF on my Hawken stock. I put 3 sanded coats on. It is amazing how easy it is too use and it works as advertised. Now on day 2 of the project, I am starting to apply the finish and buffing the excess off. It amazing how fast it dries. I will be able to finish the Hawken stock today. Thank you very much for your videos. Mike
@davidfuller66102 жыл бұрын
I can use this same technique on the wood coffee and end tables I make. I never considered wet sanding with the oil. Great idea. Beautiful finish. Thanks
@YooToobz3 жыл бұрын
Great technique! It is now my go to finish . Results have been perfect every time. Thank you very much. Rob from Danville Kansas
@RA-ze4tq2 жыл бұрын
This is the best finishing video on the web! Much, much better than the plastic polys! You are a genius, sir.
@jrdeckard33175 жыл бұрын
Lol Thanks Man
@CyclopsJoeVideos5 жыл бұрын
I like the look of that satin finish . Excellent work Sir .
@6422706 жыл бұрын
Thanks for the video. You just took my project exactly where I wanted it.
@alschillaci24355 жыл бұрын
Another well produced informative video. Keep it up, Joe.
@tompedersen65644 жыл бұрын
Sir, I enjoyed hearing you talk and I got a lot of help from your very informative video. Please keep making them.
@roberthelms9433 жыл бұрын
That is absolutely gorgeous. Great work 👍
@heatherway254 жыл бұрын
Thank You
@CyclopsJoeVideos4 жыл бұрын
Great video and excellent instruction and like the results.
@ratagris216 жыл бұрын
Thanks for this great video! I first used MinWax Antique Oil Finish to refinish an old library table. It’s been in use for over 20 years an it still looks great. I have finished and refinished several acoustic guitars with both TruOil and MinWax Antique Oil and prefer the MinWax. It is a GREAT finish for guitar necks especially. I will refine my finishing process using using your technique. I highly recommend this product if you want beautiful and durable wood finish.
@hymnplayer10 ай бұрын
I'm refinishing a Chi-Com SKS stock with your method. It came caked BLACK in cosmoline. It's beautiful to see the natural color of the wood come through with some good ol' elbow grease!
@hotexwife4 жыл бұрын
How did you get the cosmoline off? im in the exact same situation, cleaned the cosmoline out of the gun but its still heavily soaked into the wood
@punkmonki004 жыл бұрын
Awesome, just the look I've been searching for.
@rasmushjs53184 жыл бұрын
thanks Cy...i just might use this techneek on my next stock. love that wood!
@bobolsen79214 жыл бұрын
Hello i am of Paris. Thanks for tour vidéos. Good job
@jean-michelanquet4073 жыл бұрын
Great detailed video, thanks Joe !
@ronburnett94212 жыл бұрын
Very nice job just done my 1894 marlin rifle came out great.
@TheYjmfan4 жыл бұрын
Love working with the Antique Oil!
@michaelleeman83726 жыл бұрын
Fantastic video!
@aceofspadeslandscapelesson82192 жыл бұрын
Thanks for the information I just looked at the gauntlet. I had narrowed it down to the Dana or the urban.
@chrisclemons99436 жыл бұрын
Thanks again, started sanding. I will show the finished product, will take a while though. You know work, time, and health. God bless and good Sunday to you, show more pup. LOL
@johnelliott73753 жыл бұрын
This looks really nice!!
@CoolCoolCool893 жыл бұрын
Thank you
@CyclopsJoeVideos3 жыл бұрын
Great job there Joe.
@ncb27346 жыл бұрын
Nick Brown ..Thanks Nick ....Its a really good product !!! Cool part is one can will probably do 25-30 stocks !!
@CyclopsJoeVideos6 жыл бұрын
Looks great
@rockyreynolds40276 жыл бұрын
Just did this to my overunder shotgun and it looks beautiful
@matthewtimmer5154 жыл бұрын
Wanna share a before and after pic?
@The_Northerner4 жыл бұрын
Joe,you are the man! That looks awesome! Thank you my Friend!
@ronaldyetzer63136 жыл бұрын
Ronald Yetzer .Wait till u see it in person
@CyclopsJoeVideos6 жыл бұрын
I certainly can't wait but it's been this long....can you do a video for me and the fans before you send her out...comparing the different finishes, you have still in your safe, so as we can look at the differences and maybe go back and show just a brief clip of what's involved....so we can see what we are getting into and what to expect in our end results...a kind of highlight clip of finishes?...Thank you my brother! You Bad Ass 100yd golf ball shooting with 10 Meter Springer Airgun...Unbelievable! Very impressed Bigman here!
@ronaldyetzer63136 жыл бұрын
Also, I have a Question...Say we finish the stock with the Mnwax oil finish and we decide it's not shiny enough, or the oil didn'jt bring out the grain as we expected. Can we still go and put some Poly coats over the top?
@ronaldyetzer63136 жыл бұрын
Last Question....what is a good sandpaper and were can we get it?
@ronaldyetzer63136 жыл бұрын
Ronald Yetzer ...Yeah Man , if you get it in and decide down the line you want it shinier just apply a coat let it set and buff off. If you let the finish set for 10 mins or so it will get tacky and when its buffed off then more stays on the wood , and it gets more gloss to it . Hard part with this finish is toning back down ...With truoil you just steel wool it and its easy ..With this stuff its hard ( I haven't been able to do I well ) to get it even without building it back up some .
@CyclopsJoeVideos6 жыл бұрын
My next project, trying to keep busy your looks great 👍 👌 😀
@franklagos70662 жыл бұрын
it looks great, thanks mate
@monkeyking92914 жыл бұрын
Nice job! Reminded me of spitshining!
@phillipholmes4466 Жыл бұрын
Very nice Joe.Can't get any easier then that.
@fsa19466 жыл бұрын
fsa1946 ...Thanks Frank , I was real proud of how it turned out
@CyclopsJoeVideos6 жыл бұрын
Awesome Job
@tonypeede730 Жыл бұрын
great vid it looks new
@user-gr3rk6ur2p4 жыл бұрын
you are absolutely the BEST thank you for making your videos 10/30/2018
@user-gr3rk6ur2p5 жыл бұрын
Wow thanks for that !!!
@CyclopsJoeVideos5 жыл бұрын
Very nice video! Thank you sir!
@aceseights88152 жыл бұрын
Beautiful stock man, gotta get sum and do my new rifle
@jakkbatt47114 жыл бұрын
That's some cool wood.
@davids111311133 жыл бұрын
Great job!! Thanks
@mr.morgan56433 жыл бұрын
That Minwax made a month long job turn into a two day job, that looks damn nice, I like the semi filed pores and satin sheen!
@scottharvey30544 жыл бұрын
it's a gorgeous finish in person
@CyclopsJoeVideos4 жыл бұрын
Lovely job Joe! It looks beautiful. Now, can I ask your advice please? I have a Weihrauch HW99s (HW50 in US I think) and I would like an oil finish. It appears to have a polyurethane finish to it right now. What would you use to remove this? Is paint stripper too strong? Thanks in advance Joe! Cheers Paul UK
@paulirving19596 жыл бұрын
Great video 👍👍👍
@pc39834 жыл бұрын
Thanks Man
@CyclopsJoeVideos4 жыл бұрын
Ol and pepper. Haha that’s a nice dang job sir
@AZTigerMMA4 жыл бұрын
Nice work. Im working on my winchester 30-30 might go this look.
@sunshinebullysnc91066 ай бұрын
Go for it!
@CyclopsJoeVideos6 ай бұрын
great video
@yourpelletguns64116 жыл бұрын
Your PelletGuns ... Thanks man
@CyclopsJoeVideos6 жыл бұрын
Nice work
@madaboutmilitaria36302 жыл бұрын
Wow very nice 👍. That is the perfect finish that I am looking for. Is there any yearly maintenance or anything to do over time to keep this finish and protection?
@brianlee68494 жыл бұрын
“You can’t rub it too much”. isn’t that what she said!😂😂
@beanieweenie95433 жыл бұрын
She said it, I was there.
@HEYangelYOUduhSEXAYH2 жыл бұрын
Can you post a link to the sanding video? I've never done this before and it'd be nice to see an example first, I'd appreciate it! Which grit of paper did you use the to sand it before putting the oil finish on? Someone told me I should use 1000 grit for the pre-oil sanding, is that right?
@-Samus-Aran-5 жыл бұрын
Great video Cyclops, im on day 2 with my Browning 300 win mag 😁👍
@Ren-ll8tl4 жыл бұрын
You gonna love the final look !
@CyclopsJoeVideos4 жыл бұрын
hes definitely got an eye for gun stocks 😃
@darrensaltiel4402 жыл бұрын
right on awesome skills
@lovesaves32382 жыл бұрын
thanks
@CyclopsJoeVideos2 жыл бұрын
better than new 4/17/2020 thank you eddy1e
@user-gr3rk6ur2p4 жыл бұрын
The stock in the thumbnail pic is real nice!
@BYGRACE804 жыл бұрын
Man I would love to own that stock
@CyclopsJoeVideos4 жыл бұрын
Well I bought the stain just now so I’m a try it out
@jakedilbeck71073 жыл бұрын
Bar 270 is getting its wood refinished and dents steamed out. Cant wait to start the real stuff as i got fhe finish removed already with some kind of natural stripper. Took like 5 applications and i used a soft toothbrush for the checkering. I let it dry and its looking white or grey now. Its going to look really good. I have Ebony stain i want to apply in 5 layers or more. Then tung oil instead of linseed oil. I like to use it and make 8 layers and it looks shiny by then. Going to look good.
@dalanwanbdiska65423 жыл бұрын
If you want a satin on any finish rub it with rotten-stone with an light oil soaked pad. If you want a high gloss rub it out with Turtle Wax scratch & swirl remover. No need for all that final sanding. Sand it once with very fine sandpaper (600 or finer). Then rub it out. Don't forget to tape off the checkering before you do anything.
@tomcarvelli64642 жыл бұрын
Great Video! That stock turned out great!
@scottstubbs99134 жыл бұрын
Than Scott
@CyclopsJoeVideos4 жыл бұрын
Woodprix is nice for that.
@romaineathey36632 жыл бұрын
Thanks, Joe.
@paulroberts77677 ай бұрын
You're welcome
@CyclopsJoeVideos7 ай бұрын
Great results ! So you now prefer this method over the prior Tru-Oil method ? Did you use the black magic marker "Marks-a-lot" on the stipling or a black wood stain ?
@airmojo5 жыл бұрын
airmojo marks a lot and yes I like it better
@CyclopsJoeVideos5 жыл бұрын
One thing that I always liked about Tru-Oil was that it was an easy job to touch up a scratch or scrape with it... I assume with the Minwax, you can do the same easy touch-ups ?
@airmojo5 жыл бұрын
well i clicked on your post ready to pull your video to bits, but supisingly i`m a little suprised and got to say they way you went about it wasnt to bad at all. For an amatuer to follow your post and to do the same isnt bad at all, they can do a l;ot worse, well done sir
@andyp96784 жыл бұрын
Thanks Andy 👍
@CyclopsJoeVideos4 жыл бұрын
Looks nice! Maybe off topic, but when making a stock from scratch, how do you make that sandy like texture grip as opposed to classic checkering?
@rasmuskjr84873 жыл бұрын
Look up stippling gunstocks
@CyclopsJoeVideos3 жыл бұрын
Volvox hard wax oil. Best quality oil finish you can get. If you want to see in to the grain like its liquid glass, this is the oil for you.
@brianminghella33125 жыл бұрын
Hey Joe can I oil my gas Springer/ gas ram break barrel or are you not supposed to oil gas Springer's / gas ram and how do I oil it
@oscartorres19516 жыл бұрын
What ever video editor you used. keep using it I'm pretty sure TGC News used that thing in the beginning of the vid
@Viziry6 жыл бұрын
Joe, I love your videos dude. Very easy to watch, instructional and direct. I refinished an old JC Higgins Model 20 last year with Tru-Oil and I was really happy with the results. I just had a few stock finishing questions if you don't mind. 1: Does Minwax Antique Oil wear as well, is it hard enough etc, compared to Tru-Oil? 2: Have you had any experience with Richards Microfit stocks? Either laminate or Claro Walnut? 3: I couldn't quite hear the word you said in this video "Badina 66" I think? Where do I find a stock like that, with a longer forend? Much thanks.
@bongerbob2 жыл бұрын
I’ve used several Richard’s stocks . And yes it wears just as well as try oil
@CyclopsJoeVideos2 жыл бұрын
Hi Joe, love the vids man! Can you tell me about dyeing the grip area, ideally what prep required?
@jim69james842 жыл бұрын
Believe it or not I use a black marks a lot
@CyclopsJoeVideos2 жыл бұрын
Other than that nice upload I'll be back in the next one
@Viziry6 жыл бұрын
I'm watching this video again because of my project
@sandeepjangra34614 жыл бұрын
How do you keep the grain from "opening up" as you sand? I've tried the wet-sand trick after sanding, but still have much of the grain "open". I've used up to 600 paper. Also tried with Watco Danish Oil, then tried Wipe-on Poly. Haven't had much success with either.
@abn82dmp2 жыл бұрын
I use a small amount of finish as I sand and it fills in the grain with the sanding dust
@CyclopsJoeVideos2 жыл бұрын
Howdy Joe! First off, thank you for the great videos and the smartass artistry! Love it! So I want to wood burn some art and stipple then grips. Will it be ok to woodburn after the oil refinishing? I’m thinking if it did it prior to, I’d hand the pyro down and fill it with the slurry. Thanks brother!
@dennisyoung24774 жыл бұрын
Yeah man that should work Great !
@CyclopsJoeVideos4 жыл бұрын
This is my first stock refinish. I got a Sam Yang 44 909 Light Hunter. Haven’t had a chance to shoot it because of the coronacation. So I said e’f it why not refinish the stock, it’s ugly! Lmao! So here I am! You on Facebook? I’d like to share the before and after. 🤘🏼
@dennisyoung24774 жыл бұрын
Would it be proper to stain and do a light sand before applying this method? I’ve never done wood working or anything like that before so steps and process in that nature is completely new to me.
@casperxmapop58532 жыл бұрын
You can stay at it and then apply this technique yeah it would work fine
@CyclopsJoeVideos2 жыл бұрын
After this video is there anything to put on the stock to finish it or are you finished. Love this method trying it for the first time thank you
@marklecardo9815 Жыл бұрын
Joe, Can I use Renaissance Wax or linseed oil for a top coat? Thx u
@marklecardo9815 Жыл бұрын
Joe was this stock beech or walnut? I'm thinking of doing my AA prosport walnut stock, as it's dry and unfinished from the factory.
@tmurray19725 ай бұрын
Walnut
@CyclopsJoeVideos4 ай бұрын
I build muzzle loading rifles using extremely high quality curly maple. I have been looking for this my whole life! It makes the finish look like its liquid. Hard to explain. Joe, can you use magic marker to darken stripes on curly maple or what would you suggest?
@johnnycheek16064 жыл бұрын
I would just let the natural beauty shine thru
@CyclopsJoeVideos4 жыл бұрын
You can take a cuetip and lightly stain the stripes first then lightly sand that stain off the areas where it bleed past the stripes
@kevincarson60874 жыл бұрын
Wow
@user-zy9sp1lv5w4 жыл бұрын
Hi, great video and I’m about to follow this for my Perazzi HT3. How do you then maintain the finish?
@kljw66 Жыл бұрын
No special care at all . Finish cures rock hard
@CyclopsJoeVideos Жыл бұрын
Hello Joe. I'm wondering if the same procedure you used in your (great) video could be used also with boiled linseed oil.. What do you think? Thanks a lot and best regards from Italy! :)
@mamiz694 жыл бұрын
I don't use Boiled linseed oil where I live because the humidity is SO HIGH it never cures completely. So I honestly don't know . Sorry couldn't be of more help
@CyclopsJoeVideos4 жыл бұрын
@@CyclopsJoeVideos thanks for the fast reply, Joe, and for the great videos. All the best. :)
@mamiz694 жыл бұрын
New subscriber! I love your videos
@jacobatkins71576 жыл бұрын
Jacob Atkins ..Thanks Jacob ! I enjoy making them.
@CyclopsJoeVideos6 жыл бұрын
Joe, what effect does the type of wood have on this process given that different worlds have different grains?
@paulfarrell59356 жыл бұрын
Paul Farrell ...Porous woods just take longer to stop soaking up finish .Waiting g overnight keeps a solid base for finish to build on 2nd day
@CyclopsJoeVideos6 жыл бұрын
Airgun Classics : Joe W Rhea Thanks Joe! Great information👍👍👍
@paulfarrell59356 жыл бұрын
how do you maintain it , when I clean my rifles I usually use balastol on the wood , does this notify the need , effect it , Thanks great video
@mhzrango4 жыл бұрын
Benny I use a tack cloth , and a piece of my wife's wedding dress
@CyclopsJoeVideos4 жыл бұрын
A piece of your Wife's wedding dress. Your stone cold Joe. ;
@mikel91624 жыл бұрын
I’ve got a miniature schnauzer as welk
@madaboutmilitaria36302 жыл бұрын
Mine is my sweetheart
@CyclopsJoeVideos2 жыл бұрын
Ok I have to ask. I’m looking for a entry level pcp repeat rifle. What would you suggest to start out with. Thanks Chris.
@chrisclemons99436 жыл бұрын
Chris Clemons Chris to me the Gamo Urban is the best entry level PCP hands down .Great quality , and excellent accuracy Don't be swayed by the reviews pushing " new product " ..The Urban is a real bargain
@CyclopsJoeVideos6 жыл бұрын
i stained my russian sks stock with minwax polyshades and it's still sticky after 24 hours. should i wait longer for it to dry or did i mess this up and need to remove it? i sanded the wood, used tack cloth and i only put one thin layer of polyshades. i've never stained wood before and i know nothing about it except what i read online.
@kronomikon53556 жыл бұрын
Krono Mikon ..I wish I could help but I've never used their poly shades so don't know how long it normally takes to dry ...Sorry
@CyclopsJoeVideos6 жыл бұрын
Cyclops Videos Joe W Rhea no problem, thank you sir
@kronomikon53556 жыл бұрын
Do you like the oil finish or the wipe on polyurethane you used on the other stock the best?
@brokenarrow64914 жыл бұрын
This one looks best to me
@CyclopsJoeVideos4 жыл бұрын
Please do the fire pit finish again. Just a tad less fire this time though.
@baldrickscunningplan61546 жыл бұрын
Beetlejuice 01 ...If I find the right stock I'm gonna try it with a SNA blowtorch so I can control the burn better. But I'm NOT thru setting stuff on fire :)
@CyclopsJoeVideos6 жыл бұрын
What you are doing with the True Oil is raising the grain of the wood, and sanding it off each time. You can do same thing with water. YOU should do this before you put any type of finish that will be the final finish. It makes a very pretty and tough finish on your stock.
@davidminshew61174 жыл бұрын
I'm in the process of stripping my rifle stock it's my first time gonna strip today and apply stain tomorrow ,should I wet the stock after striping and sand it while wet to raise the grain or should I stain and and apply tru oil and wet sand first couple coats ?
@madbluntz420694 жыл бұрын
I re-finish a lot of gun stocks myself and I'm about to start another one. My techniques are a little different than yours but the results are about the same. Its all about filling in the grain. Makes the gun feel so much better. Is that a miniature Schnauzer? If so I have one too-Rocky- he's my partner
@daviddejong1875 жыл бұрын
It is Bella is my heart...My traveling buddy ...And brains of my operation
@CyclopsJoeVideos5 жыл бұрын
Three questions. Does this finish seal it well enough for a hunting rifle? For wet days in the field? Could you do a vid showing how to do a grip like that?? The stippling and staining. Thanx in advance
@barryweaver6834 Жыл бұрын
It’ll hold up great ! Great idea on the stillling video
@CyclopsJoeVideos Жыл бұрын
@@CyclopsJoeVideos Thanx for your quick reply. Yea I’d enjoy a stippling and border vid. Not too many on YT and I think I’d like to do that on a laminate muzzleloader stock I’m doing. Enjoy your vids
@barryweaver6834 Жыл бұрын
Question: if it doesn't turn out as dark as I'd hoped, can I apply a wood stain to it after it's had a day or so to sit?
@-Samus-Aran-5 жыл бұрын
Yes you can . It's no problem
@CyclopsJoeVideos5 жыл бұрын
@@CyclopsJoeVideos thanks for the fast reply! I'll do just that. I'm on the Day 2 steps today so we'll see how it turns out. Thanks again!
@-Samus-Aran-5 жыл бұрын
Samus Aran How did the staining turn out?
@michaelclover36514 жыл бұрын
Do you use a wax over top of this finish to protect it or is this the final product?
@joshford78284 жыл бұрын
This is final finish . I don't use wax
@CyclopsJoeVideos4 жыл бұрын
Why no varnish? Does the oil only protect enough for a field gun in a wet environment?
@hermit62085 жыл бұрын
It does
@CyclopsJoeVideos5 жыл бұрын
just sharing, through walfart online today i was able to get the #250 size tin of crosman .177 wad-cutter pellets for $2.70 something with free store pickup in 2 days. with the #500 tins still being just under $12, getting #250 for under $3 puts the price down below the beeman pointed pellets which by the way aren't bad pellets @ $7 for 500 through big 5....
@quadflopper10126 жыл бұрын
Walmart is anti, 2ND amendment , so why are you supporting them ?
@scottclark7984 жыл бұрын
Did you stain the stock before I have a real light birch stock and I want to get it darker could you stain it first and then your method? Thanks
@philthy81502 жыл бұрын
Yes
@CyclopsJoeVideos2 жыл бұрын
❤
@michal.abramowicz Жыл бұрын
I refinished the stock on my Sako L 597 with Boiled linseed oil . Its dull as it doesn’t bring out the grain of the European walnut
@ASSHOLE123456ish2 жыл бұрын
Hows that compare to tru-oil honestly, i mean i love tru-oil but id like to try something different.
@07roadking435 жыл бұрын
It's a lot easier to work with , it honestly is like waxing a car with old school wax . Wipe on , let her dry just a lil , buff off .
@CyclopsJoeVideos5 жыл бұрын
Those transitions are far out Joe! LOL. The stock looks good. I prefer a satin on a darker wood though.
@g4outdoors3 жыл бұрын
Which gun does the stock belong to? And is it custom made or factory?
Guys click the link below to help me keep my channel sponsor free !! Thanks in Advance . www.paypal.me/JoeWayneRhea
Beautiful finish ! I’ve watched this video several times and wondered if this would work on a lighter colored laminated stock(green, tan, black& brown? I think). I’m concerned that the sanding might create a slurry which would dull/stain the definition of the laminated wood. Have you ever done this before on a laminated wood or if not what would you suggest. Thank you for all your informative videos. I don’t have a pay pal account what other options do you have.?
This really works. the video doesn't allow viewers to appreciate the true texture and feel of the finished wood, I used this process on a custom black cherry thumb hole stock I made and was amazed how well it turned out. The only thing that was different for my job was using #1200 paper on the last sanding versus 1000 (since I couldn't find any). I showed the stock to several fellow gun enthusiasts and they were equally impressed. The stippled areas got the wipe on, wipe off treatments as described in the video, and they turned out very well too. Thanks so much for posting this method!
Thanks man
Good Morning Joe; I am on a muzzleloader Hawken build. I first finished the Hawken stock with a boiled linseed oil which turned out badly. It never would harden. The stock felt tacky and would not dry and cure. After looking at you videos of the Minwax Antuque Oil Finish I ordered a pint and after spending 3 days on removing the old finish, I started the AOF on my Hawken stock. I put 3 sanded coats on. It is amazing how easy it is too use and it works as advertised. Now on day 2 of the project, I am starting to apply the finish and buffing the excess off. It amazing how fast it dries. I will be able to finish the Hawken stock today. Thank you very much for your videos. Mike
I can use this same technique on the wood coffee and end tables I make. I never considered wet sanding with the oil. Great idea. Beautiful finish. Thanks
Great technique! It is now my go to finish . Results have been perfect every time. Thank you very much. Rob from Danville Kansas
This is the best finishing video on the web! Much, much better than the plastic polys! You are a genius, sir.
Lol Thanks Man
I like the look of that satin finish . Excellent work Sir .
Thanks for the video. You just took my project exactly where I wanted it.
Another well produced informative video. Keep it up, Joe.
Sir, I enjoyed hearing you talk and I got a lot of help from your very informative video. Please keep making them.
That is absolutely gorgeous. Great work 👍
Thank You
Great video and excellent instruction and like the results.
Thanks for this great video! I first used MinWax Antique Oil Finish to refinish an old library table. It’s been in use for over 20 years an it still looks great. I have finished and refinished several acoustic guitars with both TruOil and MinWax Antique Oil and prefer the MinWax. It is a GREAT finish for guitar necks especially. I will refine my finishing process using using your technique. I highly recommend this product if you want beautiful and durable wood finish.
I'm refinishing a Chi-Com SKS stock with your method. It came caked BLACK in cosmoline. It's beautiful to see the natural color of the wood come through with some good ol' elbow grease!
How did you get the cosmoline off? im in the exact same situation, cleaned the cosmoline out of the gun but its still heavily soaked into the wood
Awesome, just the look I've been searching for.
thanks Cy...i just might use this techneek on my next stock. love that wood!
Hello i am of Paris. Thanks for tour vidéos. Good job
Great detailed video, thanks Joe !
Very nice job just done my 1894 marlin rifle came out great.
Love working with the Antique Oil!
Fantastic video!
Thanks for the information I just looked at the gauntlet. I had narrowed it down to the Dana or the urban.
Thanks again, started sanding. I will show the finished product, will take a while though. You know work, time, and health. God bless and good Sunday to you, show more pup. LOL
This looks really nice!!
Thank you
Great job there Joe.
Nick Brown ..Thanks Nick ....Its a really good product !!! Cool part is one can will probably do 25-30 stocks !!
Looks great
Just did this to my overunder shotgun and it looks beautiful
Wanna share a before and after pic?
Joe,you are the man! That looks awesome! Thank you my Friend!
Ronald Yetzer .Wait till u see it in person
I certainly can't wait but it's been this long....can you do a video for me and the fans before you send her out...comparing the different finishes, you have still in your safe, so as we can look at the differences and maybe go back and show just a brief clip of what's involved....so we can see what we are getting into and what to expect in our end results...a kind of highlight clip of finishes?...Thank you my brother! You Bad Ass 100yd golf ball shooting with 10 Meter Springer Airgun...Unbelievable! Very impressed Bigman here!
Also, I have a Question...Say we finish the stock with the Mnwax oil finish and we decide it's not shiny enough, or the oil didn'jt bring out the grain as we expected. Can we still go and put some Poly coats over the top?
Last Question....what is a good sandpaper and were can we get it?
Ronald Yetzer ...Yeah Man , if you get it in and decide down the line you want it shinier just apply a coat let it set and buff off. If you let the finish set for 10 mins or so it will get tacky and when its buffed off then more stays on the wood , and it gets more gloss to it . Hard part with this finish is toning back down ...With truoil you just steel wool it and its easy ..With this stuff its hard ( I haven't been able to do I well ) to get it even without building it back up some .
My next project, trying to keep busy your looks great 👍 👌 😀
it looks great, thanks mate
Nice job! Reminded me of spitshining!
Very nice Joe.Can't get any easier then that.
fsa1946 ...Thanks Frank , I was real proud of how it turned out
Awesome Job
great vid it looks new
you are absolutely the BEST thank you for making your videos 10/30/2018
Wow thanks for that !!!
Very nice video! Thank you sir!
Beautiful stock man, gotta get sum and do my new rifle
That's some cool wood.
Great job!! Thanks
That Minwax made a month long job turn into a two day job, that looks damn nice, I like the semi filed pores and satin sheen!
it's a gorgeous finish in person
Lovely job Joe! It looks beautiful. Now, can I ask your advice please? I have a Weihrauch HW99s (HW50 in US I think) and I would like an oil finish. It appears to have a polyurethane finish to it right now. What would you use to remove this? Is paint stripper too strong? Thanks in advance Joe! Cheers Paul UK
Great video 👍👍👍
Thanks Man
Ol and pepper. Haha that’s a nice dang job sir
Nice work. Im working on my winchester 30-30 might go this look.
Go for it!
great video
Your PelletGuns ... Thanks man
Nice work
Wow very nice 👍. That is the perfect finish that I am looking for. Is there any yearly maintenance or anything to do over time to keep this finish and protection?
“You can’t rub it too much”. isn’t that what she said!😂😂
She said it, I was there.
Can you post a link to the sanding video? I've never done this before and it'd be nice to see an example first, I'd appreciate it! Which grit of paper did you use the to sand it before putting the oil finish on? Someone told me I should use 1000 grit for the pre-oil sanding, is that right?
Great video Cyclops, im on day 2 with my Browning 300 win mag 😁👍
You gonna love the final look !
hes definitely got an eye for gun stocks 😃
right on awesome skills
thanks
better than new 4/17/2020 thank you eddy1e
The stock in the thumbnail pic is real nice!
Man I would love to own that stock
Well I bought the stain just now so I’m a try it out
Bar 270 is getting its wood refinished and dents steamed out. Cant wait to start the real stuff as i got fhe finish removed already with some kind of natural stripper. Took like 5 applications and i used a soft toothbrush for the checkering. I let it dry and its looking white or grey now. Its going to look really good. I have Ebony stain i want to apply in 5 layers or more. Then tung oil instead of linseed oil. I like to use it and make 8 layers and it looks shiny by then. Going to look good.
If you want a satin on any finish rub it with rotten-stone with an light oil soaked pad. If you want a high gloss rub it out with Turtle Wax scratch & swirl remover. No need for all that final sanding. Sand it once with very fine sandpaper (600 or finer). Then rub it out. Don't forget to tape off the checkering before you do anything.
Great Video! That stock turned out great!
Than Scott
Woodprix is nice for that.
Thanks, Joe.
You're welcome
Great results ! So you now prefer this method over the prior Tru-Oil method ? Did you use the black magic marker "Marks-a-lot" on the stipling or a black wood stain ?
airmojo marks a lot and yes I like it better
One thing that I always liked about Tru-Oil was that it was an easy job to touch up a scratch or scrape with it... I assume with the Minwax, you can do the same easy touch-ups ?
well i clicked on your post ready to pull your video to bits, but supisingly i`m a little suprised and got to say they way you went about it wasnt to bad at all. For an amatuer to follow your post and to do the same isnt bad at all, they can do a l;ot worse, well done sir
Thanks Andy 👍
Looks nice! Maybe off topic, but when making a stock from scratch, how do you make that sandy like texture grip as opposed to classic checkering?
Look up stippling gunstocks
Volvox hard wax oil. Best quality oil finish you can get. If you want to see in to the grain like its liquid glass, this is the oil for you.
Hey Joe can I oil my gas Springer/ gas ram break barrel or are you not supposed to oil gas Springer's / gas ram and how do I oil it
What ever video editor you used. keep using it I'm pretty sure TGC News used that thing in the beginning of the vid
Joe, I love your videos dude. Very easy to watch, instructional and direct. I refinished an old JC Higgins Model 20 last year with Tru-Oil and I was really happy with the results. I just had a few stock finishing questions if you don't mind. 1: Does Minwax Antique Oil wear as well, is it hard enough etc, compared to Tru-Oil? 2: Have you had any experience with Richards Microfit stocks? Either laminate or Claro Walnut? 3: I couldn't quite hear the word you said in this video "Badina 66" I think? Where do I find a stock like that, with a longer forend? Much thanks.
I’ve used several Richard’s stocks . And yes it wears just as well as try oil
Hi Joe, love the vids man! Can you tell me about dyeing the grip area, ideally what prep required?
Believe it or not I use a black marks a lot
Other than that nice upload I'll be back in the next one
I'm watching this video again because of my project
How do you keep the grain from "opening up" as you sand? I've tried the wet-sand trick after sanding, but still have much of the grain "open". I've used up to 600 paper. Also tried with Watco Danish Oil, then tried Wipe-on Poly. Haven't had much success with either.
I use a small amount of finish as I sand and it fills in the grain with the sanding dust
Howdy Joe! First off, thank you for the great videos and the smartass artistry! Love it! So I want to wood burn some art and stipple then grips. Will it be ok to woodburn after the oil refinishing? I’m thinking if it did it prior to, I’d hand the pyro down and fill it with the slurry. Thanks brother!
Yeah man that should work Great !
This is my first stock refinish. I got a Sam Yang 44 909 Light Hunter. Haven’t had a chance to shoot it because of the coronacation. So I said e’f it why not refinish the stock, it’s ugly! Lmao! So here I am! You on Facebook? I’d like to share the before and after. 🤘🏼
Would it be proper to stain and do a light sand before applying this method? I’ve never done wood working or anything like that before so steps and process in that nature is completely new to me.
You can stay at it and then apply this technique yeah it would work fine
After this video is there anything to put on the stock to finish it or are you finished. Love this method trying it for the first time thank you
Joe, Can I use Renaissance Wax or linseed oil for a top coat? Thx u
Joe was this stock beech or walnut? I'm thinking of doing my AA prosport walnut stock, as it's dry and unfinished from the factory.
Walnut
I build muzzle loading rifles using extremely high quality curly maple. I have been looking for this my whole life! It makes the finish look like its liquid. Hard to explain. Joe, can you use magic marker to darken stripes on curly maple or what would you suggest?
I would just let the natural beauty shine thru
You can take a cuetip and lightly stain the stripes first then lightly sand that stain off the areas where it bleed past the stripes
Wow
Hi, great video and I’m about to follow this for my Perazzi HT3. How do you then maintain the finish?
No special care at all . Finish cures rock hard
Hello Joe. I'm wondering if the same procedure you used in your (great) video could be used also with boiled linseed oil.. What do you think? Thanks a lot and best regards from Italy! :)
I don't use Boiled linseed oil where I live because the humidity is SO HIGH it never cures completely. So I honestly don't know . Sorry couldn't be of more help
@@CyclopsJoeVideos thanks for the fast reply, Joe, and for the great videos. All the best. :)
New subscriber! I love your videos
Jacob Atkins ..Thanks Jacob ! I enjoy making them.
Joe, what effect does the type of wood have on this process given that different worlds have different grains?
Paul Farrell ...Porous woods just take longer to stop soaking up finish .Waiting g overnight keeps a solid base for finish to build on 2nd day
Airgun Classics : Joe W Rhea Thanks Joe! Great information👍👍👍
how do you maintain it , when I clean my rifles I usually use balastol on the wood , does this notify the need , effect it , Thanks great video
Benny I use a tack cloth , and a piece of my wife's wedding dress
A piece of your Wife's wedding dress. Your stone cold Joe. ;
I’ve got a miniature schnauzer as welk
Mine is my sweetheart
Ok I have to ask. I’m looking for a entry level pcp repeat rifle. What would you suggest to start out with. Thanks Chris.
Chris Clemons Chris to me the Gamo Urban is the best entry level PCP hands down .Great quality , and excellent accuracy Don't be swayed by the reviews pushing " new product " ..The Urban is a real bargain
i stained my russian sks stock with minwax polyshades and it's still sticky after 24 hours. should i wait longer for it to dry or did i mess this up and need to remove it? i sanded the wood, used tack cloth and i only put one thin layer of polyshades. i've never stained wood before and i know nothing about it except what i read online.
Krono Mikon ..I wish I could help but I've never used their poly shades so don't know how long it normally takes to dry ...Sorry
Cyclops Videos Joe W Rhea no problem, thank you sir
Do you like the oil finish or the wipe on polyurethane you used on the other stock the best?
This one looks best to me
Please do the fire pit finish again. Just a tad less fire this time though.
Beetlejuice 01 ...If I find the right stock I'm gonna try it with a SNA blowtorch so I can control the burn better. But I'm NOT thru setting stuff on fire :)
What you are doing with the True Oil is raising the grain of the wood, and sanding it off each time. You can do same thing with water. YOU should do this before you put any type of finish that will be the final finish. It makes a very pretty and tough finish on your stock.
I'm in the process of stripping my rifle stock it's my first time gonna strip today and apply stain tomorrow ,should I wet the stock after striping and sand it while wet to raise the grain or should I stain and and apply tru oil and wet sand first couple coats ?
I re-finish a lot of gun stocks myself and I'm about to start another one. My techniques are a little different than yours but the results are about the same. Its all about filling in the grain. Makes the gun feel so much better. Is that a miniature Schnauzer? If so I have one too-Rocky- he's my partner
It is Bella is my heart...My traveling buddy ...And brains of my operation
Three questions. Does this finish seal it well enough for a hunting rifle? For wet days in the field? Could you do a vid showing how to do a grip like that?? The stippling and staining. Thanx in advance
It’ll hold up great ! Great idea on the stillling video
@@CyclopsJoeVideos Thanx for your quick reply. Yea I’d enjoy a stippling and border vid. Not too many on YT and I think I’d like to do that on a laminate muzzleloader stock I’m doing. Enjoy your vids
Question: if it doesn't turn out as dark as I'd hoped, can I apply a wood stain to it after it's had a day or so to sit?
Yes you can . It's no problem
@@CyclopsJoeVideos thanks for the fast reply! I'll do just that. I'm on the Day 2 steps today so we'll see how it turns out. Thanks again!
Samus Aran How did the staining turn out?
Do you use a wax over top of this finish to protect it or is this the final product?
This is final finish . I don't use wax
Why no varnish? Does the oil only protect enough for a field gun in a wet environment?
It does
just sharing, through walfart online today i was able to get the #250 size tin of crosman .177 wad-cutter pellets for $2.70 something with free store pickup in 2 days. with the #500 tins still being just under $12, getting #250 for under $3 puts the price down below the beeman pointed pellets which by the way aren't bad pellets @ $7 for 500 through big 5....
Walmart is anti, 2ND amendment , so why are you supporting them ?
Did you stain the stock before I have a real light birch stock and I want to get it darker could you stain it first and then your method? Thanks
Yes
❤
I refinished the stock on my Sako L 597 with Boiled linseed oil . Its dull as it doesn’t bring out the grain of the European walnut
Hows that compare to tru-oil honestly, i mean i love tru-oil but id like to try something different.
It's a lot easier to work with , it honestly is like waxing a car with old school wax . Wipe on , let her dry just a lil , buff off .
Those transitions are far out Joe! LOL. The stock looks good. I prefer a satin on a darker wood though.
Which gun does the stock belong to? And is it custom made or factory?
Factory