Skills for Psychological Recovery Bulldozer SHANTUI DH17 Stuck In Deep Sand Safety Work
2022 ж. 14 Сәу.
9 928 532 Рет қаралды
Hello Guy!! Best technique skills and experience rescuer heavy bulldozer SHANTUI DH17 stuck in deep sand skills working it to terrible recovery.
Recovery by excavator CAT 320B and Bulldozer SHANTUI DH17 safety work.
Please enjoying videos!!
Thank you so much for watching videos, Please SUBSCRIBE, LIKE, COMMENT SHARE Videos for more heavy equipment movement videos from our channel
You tube , siempre nos ofrece tremendos programas instructivos. Gracias You tuve.
To rescue the machine in the best way, you need to dig a deep hole next to the machine so that the water can flow down there and then take all the sand out of the machine, you can pull the machine up more easily.
O que feys és maqe yes buriaco.
The cable should be attached to the excavator bucket. But really the hoe can pull it out on its own without a cable.
Unless you have a high water table!
Might be a stupid Question but did anyone think to take it out of gear and chain the blade up?
Nope, that requires brains, which these guys are clearly lacking😀😀
Why didn't they take the stuck one out of gear? Or at least put someone in the cab holding down the declutch pedals.
Why not releasing the final drive breaks manually to put the gears ⚙️ on neutral so that towing can be done with ease
exactly
that would make for a simple rescue and no video
It seems to be a lack of grease for the cat excavator
Shortly they will be complaining it broke some pins!!
Obviously not owner operators
I'm amazed they did not drain the water out and then check all the fluids make sure there's no water in the oil or the engine air cleaner and start the darn thing up and then pull it out and then pack in the dirt behind it with a nice slope would have made the job a lot easier I'm amazing the chain or cable did not break and kill somebody.
Once it sucks water in, it's off for a rebuild. It bends or breaks rods. Any water is too much for the starter to overcome.
Damn I know you can hear that horrific squeaking. Grease is a hell of a lot cheaper than changing parts.
That's what I was thinking.
Grease, word of the day. lol
NotMyJob/10
Yeah and I think idiots like that working there a swamp or a river? I need their head examined I need to learn where to work where they're not going to drive over a cavern of water and drop into it
Seen the price of grease lately, and that’s if you can find it
It would be interesting to know exactly what kind of road bed or building foundation they intend to build on top of this muck. I'm sure it's well engineered.
Has to be a govt. funded job ..😀
Looks like boeung kak lake in phnom penh Cambodia to me, going by the khmer in the video. They filled it with dredged sand in 2010 ish to make way for large Chinese developers.
At least they're all wearing their safety sandals.
ESTOS SEÑORES SON UNOS EXPERTOS MAQUINISTAS , TENER MUCHA PACIENCIA Y TRABAJAR EN BUENA COMBINACIÓN , ES LA CLAVE DE EL ÉXITO. FELICITACIONES , POR UN PROGRAMA TAN INSTRUCTIVO. GRACIAS .
TO SO DEBILE! KITAICE DO ,CAPY, NIE DO MASZYN!!!! IA 40 L KOPARKO IEZDZE !!!!!!TO SO GŁOMBY!!!!!!!!
😢ZAWALYC DEGO DEBILA !!!!
Try some grease on those trackhoe pins. All you have to do to raise the blade is put it in float and not disconnect the lines.
Yes needs grease
It definitely doesn't sound like it has regular scheduled maintenance done.
They should dig that dozer in a little deeper, bury it and say it was stolen. Ive heard that model isn't worth a shit
It must have been his first day on the job, because to mess things up that badly you need some really special skills.
Oh, there are a few US rescues with supposed “experienced” operators that certainly parallel this debacle.
And his last
probably a government job. they all qualify
7p
Ohh really. I\I am a Photographer And a few months ago I was on a new construction site looking for unique shots I stepped onto what looked like somewhat solid ground NOPE Almost like quicksand Sunk up to my Knees and if it where not for the solid ground that I just stepped off of Who knows what issues I would have had
The CAT escavator Is one great piece of equipment
Especially when screaming at you. 😳 Evidently not only do they not know how to run equipment they don't know what a Grease gun is
I dont know maybe im not smart but i would have done the same and fill sand all around the machine but then dug a deep hole away from the dozer so that all the water would have a place to go then clean all the mud away from the tracks and blade to free it up and possibly drive it out with a tow Just seems like alot of wasted man power and resources And for the love of god grease the bratings and joints
I love to watch the guy in the pink shirt! Both units are pushing and pulling for all their worth and he stands there waving them on like they need his instructions.
With that helmet on I doubt he even worked for them lol
They always have many guys signaling at once, it makes them feel like big shots
What a couple of idiots!
The transition from water buffalo's to bulldozers does not happen over night. HA HA HA.
Lesson of the day: If you're stuck, remove all stickers.
How did the dozer went there @ the first place!!?
Pretty gutsy backfilling that hole and putting the other dozer out on it. Could have been a twofor day
that had me nervous, too, Lol
Wow, I love their safety shoes
🤣
Steel toe sandals
Sono sempre a bagnomaria
This isn't just a video; it's an experience. You've successfully woven technology and nature into a captivating narrative.
Somos. Colombia gente con. Ideas. Felicitaciones
It's not about knowing one's limits. It's about knowing your vehicles limits and this is one way of learning that lesson.
yes i agree you hit it on the button bro is knowing your limits 👍👍👍
If they even knew "what is a grease gun", is questionable
Repent to Jesus Christ “I thank my God every time I remember you.” Philippians 1:3 NIV
@@repentandbelieveinJesusChrist3 Nothing to repent from but sick evil men of religion cults. Sin only exists in the evil hearts of men that want you to believe sin exists. Love is the way and nothing else! I rebuke YOU in the name of love. lol!
@@repentandbelieveinJesusChrist3 Evangelicals are a big part of what's wrong with the world today.
when we get stuck in USA we dig around it like you did but get to the side of the dozer and take track hole bucket and grab the side of dozer blade and pull it around where the blade is facing out of the hole and get in front of dozer and pull it out with track hole bucket
Can you imagine the fuel bill for all those pieces of heavy equipment to be involved with this cluster f*ck. Nothing like some rubber neckers sitting there waiting for steel cables to snap and send their heads rolling. Not a hardhat in sight and everyone barefoot. OHSA, we don't need no stinking Osha. There is even a woman standing on the edge with a toddler in her arms.
The tracks wouldn't turn. I am wondering if it had a mechanical breakdown as the reason for it being stuck, or they just didn't put the transmission in neutral before pulling it.
Proudly presented to you by work safe……hi vis, steel caps and common sense
As an ex-Caterpillar and Komatsu sales guy I cringed the whole way through this. Incredible how many bad practices and safety standards they broke. And clear to see the value of well-made gear - this stuff looks like made of TIN. but at 33:20 - gushing hydraulic oil from raising the blade by force - wow. and sitting watching - where you could be cut in half - - not-so-smart-fella's but I could not believe they all stood beside the 320 SHAKING the cable - with the CARBODY of the excavator. Like - Oh My God - and all the while - the dozer's tracks still locked. (I guess getting the engine restarted once dry - - was still impossible? Better to risk cutting a few guys in half? Entertaining...) And they never did get the tracks unlocked - they just moved the site - around the dozer and drug it out.
Gosh - this looked so unsafe ... so unsafe .... and the machines did look like they were made of tinfoil ...
is there a release mechanism for the tracks???
Shake Hands with Danger.
They don't care about trash too.
Well grammatically speaking, if they quote "broke bad practises" then following the rule of negation, that means they did well?? 😉
Yes! Mr Caterpillar would have been saying "Give it heaps, boys, and when you finally manage to bust it, I'll happily sell you another!" I was waiting to see the washdown and the tracks freed but neither happened. We should appreciate that not all others operate machinery as we do ... they must make do with what they've got.
Repent to Jesus Christ “I thank my God every time I remember you.” Philippians 1:3 NIV F
@@repentandbelieveinJesusChrist3 - - - what a joke ?
Experts at work.
mud sand and water , solid combination guys .
Sucesso total✨,isso é o que importa…….. o resto é papo furado de quem não entende nada e fica dando palpites sem importância alguma🤔. PARABÉNS para a equipe do resgate✨💪🏽
Someone should tell these people about grease gun's and how they should be used all the time
And thanks for pulling the decal
very very smart and supportive of each other !
I would think putting the tracks in neutral so they rolled instead of dragged would have made things MUCH easier.....I'm just sayin
Neutral.....🙄
Last time I checked there’s no such thing as free rolling tracks
Neutral? 🤦♂️
UK UK i you
Yes, releasing the final drives by pulling the stub axles. I think I got Dumber watching these monkeys..
You know? with all the filming done, why not show3 how the dozer got in there in the first place? would love to see that!!!
Ok à
Possibly inexperienced operator
Прозевал вспышку и засадил по самые помидоры. Теперь год отрабатывать будет😏
heavy equipment and flipflops... nice.
Il faut s'avoir si prendre dans ces qua la bravo ! Il sent sortent !
Psychological Recovery? Do we have a therapist for this machine?
Mystère !!!!!
From everything I could see, the breather intake was never underwater, so I don't believe the engine was hurt. That said, why wasn't the operator of the stuck machine inside, full throttle, helping get the dozer out?
they get pad by the hr. LOL
I thought about that too, the only thing I can think of is that they broke it bad when they were trying to get it out the first time. Maybe snapped and axle or blew the transmission? Could have wrecked the motor too it happens.
Because he was busy looking for his shoes. Who in the hell works on a heavy construction site barefooted?
@@jeffb321 People in third world dumps
If the shoe was on the other foot this might not have happened ba ha ha ha crazy ,this video is not OSHA APPROVED lol
NUMBER ONE IS NOW NUMBER TWO ! ! !
صاحب هده الجرافة لن يعود مرة ثانية إلى دلك المكان ستبقى داكرة في حياته
And turn the excavator around and use the bucket the hydros is where it's power is
😊😅 2:07 😊
Are they dragging it out while it is in gear ????
Big enough digger it doesn't matter. We pulled a d9 aside with a 400 series
That's what I was thinking. Doesn't really make much sense to me.
It seems....
Amateurs....
@@NickOvchinnikov !aqqa1
Thank you 🙏 for great 👍 video 🎥 finally it is free 😀👏👏👏 can you do it again please 🙏it is only waste of money 💰 great 👍 show 😅
频道非常好！谢谢！！
I enjoyed this video on what not to do ever, wow , I'm speechless. Glad nobody died because if that cable had broken those 2 guys would be 4!
In the third world, it is not a big deal, they are easily replaced and no one is getting sued or fined. They do not care about safety, that is why no one has a hard hat and everyone is wearing flip flops at the construction site.
You and both were worried about cable lash. We had similar problem and ended up pumping compressed air under it to break the vacum.
@@ccmer1956doc That, here would have made things worse.
I was wondering if dropping some rock or ballast into the area would actually provide more and easier traction for the dozer. I have seen that done in another situation that involved a D8 which became stuck and bogged down in a Florida swamp....just curious, thanx.
The boom on the excavator sounds AWESOME! Ever heard of grease???
Es el animo que te d tu compañero cuando estás agüitado un taco te ofreció 🇲🇽🇲🇽✌️
Nothing runs like a rental!
It's too bad they couldn't start the stuck dozer up to help. I think that would have made all the difference.
what if they are trying to steal it?
@@frankovito , LOL!!!!!
It was really a very tough job bringing the machine out. Could you please tell me how your machine was stuck in the sand ? Thanks ❤️🇦🇪❤️🇦🇪
Amazing Recovery!
I just can’t believe that nobody has thought about putting the transmission in neutral on the dozer that’s stuck. Heavy equipment and vehicles move a lot easier, if the transmission is in neutral.
Absolutely - or better yet do what is needed to start the engine and drive it out 🤷♂️
بك لن جقدامبيل برب تخرج
they never did put the tracks to freewheel...
I guess it must be an etiquette not to check another driver's mistakes but I sure as hell would have jumped in that cab and make sure the transmission was in neutral and no braking was on. I never saw the tracks move on the stuck dozer.
If its a hydrostatic trans it will not move unless the engine is running. The only other way would be pull the finals out of the track drives
Seems to me they could have pulled long ago with the other dozer pushed with the bucket and finished a long long long time ago. Just saying PS bare feet, and might help to pick the blade up and hook multiple pieces of equipment together to pull.
Third world. No shoes required.
Real team work
I think this was a very grand attempt to entertain viewers to have a laugh!
There are many ways leading to Rome... This is probably one of the longest ones. More experience will get you smarter in these circumstances🙂.
The engine breather intake wasn't under water why wasn't it running instead of having the tracks locked and the blade in the ground I guess they work harder instead of smarter
I'm not a heavy equipment operator but why not clean out the tracks? rolling beats dragging??
Was it stuck in gear or something? Wouldn't things been easier if the dozer's tracks were able to roll freely?
This was not as fun to watch as I expected. I agree with the things other commenters said. GREASE the excavator pivot pins! Put the tracks in neutral. Tie the blade up, it was acting as an anchor. The dozer guy finally got that right ideal. The dozer operator dug into the sand often, but did not get stuck. It makes you wonder what colossal negligence it took to get it stuck so bad in the first place. They never tried to start it after it was out of the muck, was the engine destroyed?; seems likely. ALOT of work and I wonder who paid? Any disaster is caused by a chain of bad decisions, break any link in the chain and the accident does not happen! I got fired because I lost a new shovel on a job laying underground cable. What will happen to this guy? OH, and I am still have memory issues.
You rightly on the point sir! That's also my thoughts. It must be in neutral to rolling. And of course it must be blade up. What a disastrous command they have!
We are dealing with shithole countries here though.
Ok
Hay quecinchat!!!
You had all that time, you could have spent it getting it running again which would have been a big help.
Nice work boots!
The pilot of the second bulldozer is very clever.
This 1/2 inch cable is more than sufficient to pull a 30 tonne dozer, belly deep in sand.
I'm sure the boss was happy See this. Lol.
. Este tipo de máquinas deberían tener ya de fábrica, unos ganchos reforzados desde el chasis... Así podrían ser enganchados en cualquier momento, para estirar o ser estirados (como ja necesitado en este caso específico) . En donde tenían la cabeza, aquellos ingenieros que han proyectado esta máquina..? .
Deberian de tener alguna liberacion de freno o alguna coneccion hidraulica para auxiliarlo y destrabarlo desde otra maquina o circuito hidraulico exterior
The excavator operator was pretty good.
Why isn’t an operator reversing it as they pull it out?
@54:01, it looks like his left front track is thrown from burying the tracks and the sand packing itself inside of the upper tracks and jamming them up and causing them to go off the wheels, rendering the use of the dozer's engine useless.
Because he is NOT an operator he is a tractor driver for pennies on the dollar
Yep on the thrown track.
@@larrysorenson4789 I'm legally blind and did not see the thrown track ... excuse me for not being born perfect.
@@macinfloydvolk i have worked my life with handicapped and blind. My mentor was Alvin Pennington who was the safety officer for the Apollo program. He lost his sight while sitting at his desk. He never wallowed in self pity and spent his remaining years teaching the blind at a major university, how to cope. He was a great guy and with the help of his life long friend to guide him, he golfed to a 10 handicap. My dad and I played in his golf tournament every year. Reviewing my post, i said nothing derogatory about you not “seeing” the track. And before i read the post from the guy who did “see” it , I merely agreed with him. You read something into my note that simply was not there. Your snakky and sarcastic comment was not necessary and speaks volumes about your attitude and outlook on life. I offer this: You have life. If you lived in Indonesia you would undoubtedly have been killed but by the grace of God you are here. Make the most of every moment you have and seek out beauty through grace.
That brings back memories, I built tailings ponds for 37 years, seen so many dozer’s stuck I can’t remember how many, we worked in sand and hot water slurry with a big spill hole as the tailings was pumped into what we called cells, things got bad when there was clay mixed in it. This rescue was nothing compared to having a dozer completely buried, and that rice patty dozer is the best for what you are doing, on the stuck dozer you should cut round holes in to the pads as that lets the tracks stay loose to turn and they also break the suction. All in god rescue besides the damage, no matter how stuck alway keep the front of the dozer up by putting the blade down.
Thanks 😊 🙏
This guys have wonderful skills 😳🤔😒😉
I ENJOYED WATCHING THE VIDEO 😊
Really, your working in a rice field without a rear tow hitch ???
A União faz a força.
Repent to Jesus Christ “I thank my God every time I remember you.” Philippians 1:3 NIV R
@@repentandbelieveinJesusChrist3 what a joke ?
А помельче бульдозер не могли подогнать ?
Well points are your friend in this situation.
Excelente esfuerzo ha estos operadores para sacar esta maquina saludos los felicito en equipo se puede todo 🇲🇽🇲🇽👍👍
Й1й1й
If your psychological recovery has reached this level you’re too far gone.
Thanks....this just showed up in my feed...🤣🤣🤣🤣🤣🙃
Hadir, nyimak mas Dah dalam sekali masuk excavator nya
Very good job from Fiji lsland
This was fascinating as none of them had a clue what to do. They made no attempt to put the tracks in freewheel, so it was just a dead weight. They disconnected the blade hydraulics so it could not be used to lift the machine. They tried to drag it out using tracked machines instead of anchoring a machine and using the hydraulic arm to pull it out.
@dennisharvey4499• I was waiting for them to pump that water out for the longest time.
This is what you call hydrostatic stuck ,the suction must be broken.
I have a 150 int been stuck many times hook a chain to the top of the track and pull most of time's it will rool out
Is this dozer hystat? Is there a switch to slip to neutralize the tracks? Battery should still power tracks even if you are scared to crank machine from water infiltration…..
Wet sand when it settles ,holds you like your welded down , agitated water on the sand breaks the hold ,or go brute force ,stand back for cable snapping .
Did you see how close they was walking near the machine
@@dylancolebrooke693 yeah it's scary
yet another 50 chiefs and two workers
I'm just a casual observer but might a crane be able to lift it up, the only problem would be that a crane is extremely heavy and the outriggers wouldn't work because they'd sink in the mud.
Campeonesssssss💪🏿💪🏿💪🏿💪🏿👏🏾👏🏾👏🏾👏🏾
Something happened to the transmission or final drive because the track wasn't free-wheeling. "Oh! Neutral? You didn't tell me to put it in neutral?"
Dig a hole, fill a hole and waste a lot of time....must be a government project!
Right beside the stuck machine on similar ground with more machines without Matts. Seems like a good idea if you want to have a machine party
Mantap bos ku
That was productive day.🤣
Bulldozer telumpur
looks like everyone forgot their work boots, safety vests and hard hats at home today.
John Norris. "Badges." "Badges ?" " Vee don't need no Stinkin' Badges !"
That excavator operator is some pro there.
If he was a pro he would shut that machine down and grease it for Pete's sake!