How to Prep, Prime & Paint an Engine Bay - Complete Guide

2024 ж. 11 Сәу.

13 614 Рет қаралды

Today I'm showing how to prep, primer, paint and clear coat the engine bay of this 1980 Toyota Long Bed right here in my residential garage, using aerosol paints.
The 2k Engine Paint and 2k Clear Coat are from erapaints.com/
Self Etching Primer: amzn.to/3PWJ0KQ
Grease & Wax Remover: amzn.to/4aygO9h
Tack Cloths: amzn.to/3TUADR5
Dynatron 550 Seam Sealer: amzn.to/4aN9AxY
Grey scuff pads: amzn.to/49zdhGr
Masking paper 18": amzn.to/3TXGvZX
(I earn a small amount on each product purchased through an affiliate link - Thank you for helping support this channel!)
Laser Cleaning Machine: • Everything to know abo...
More Complete Guide How-to Paint Videos:
How to: Prep and Paint an Engine: • How to: Prep and Paint...
How to: Prep and Paint a Rusty Frame: • How to: Prepare and Pa...
How to paint an Exhaust: • Best High Heat Spray P...
How to Paint Wheels: • How to: Complete Wheel...
How to paint automotive panels in a garage: • How to: Spray Automoti...
How to paint Calipers & Rotors: • How to: Paint Calipers...
How to Fix & Paint scratched plastic bumper: • How to Repair & Paint ...
How to paint color-matched fender: • How to Paint a Vehicle...
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.com/merchandise/
Instagram: 6th_gear
facebook.com/6thGearGarage

Пікірлер

Can't wait until laser cleaners are affordable 🎉
@yuppiecruncherАй бұрын
I'm currently working on a ln65 myself, mainly panel and paint. Your videos really help with planning my next step and what the standard is for my work. So thank you, from one hilux enthusiast to another. :)
@treeman5590Ай бұрын
- I wish I could get my hands on a ln65... but we never had them in North America.
  @6thGearGarage29 күн бұрын
Came here after watching your latest, when you pulled the cab. Never got the notification about this one, so thought I'd let you know. KZhead has been doing this lately.
@talltom112911 күн бұрын
- Hmmm good to know. I've heard of that happening to other channels as well. Maybe the algorithm is upset with me...
  @6thGearGarage10 күн бұрын
Your work is so pro, bro, always love watching it. Great job here, thanks for sharing with us!!!
@tedbastwock3810Ай бұрын
- Thank you!
  @6thGearGarageАй бұрын
I really look forward to your videos, your attention to detail is amazing. I can't wait to see the finished version of this truck! -- And then, an excuse for you to start a new project! I hope all is well!
@LittleMikeStarCraftАй бұрын
- Thanks, I already have my next project lined up 😁
  @6thGearGarageАй бұрын
Lazer for rust removal as a household item is a pretty good idea!
@nhansgoofyvideos7581Ай бұрын
- They're not cheap yet, but they do pay for themselves pretty quickly in time saved.
  @6thGearGarage29 күн бұрын
Props to you on the hard work. Wish I could do more things like this.
@wg8304Ай бұрын
Nice job. 1000% improvement. Thanks for another source of 2k paint. OEM colors too.
@craigwiest772Ай бұрын
- Thanks 👍
  @6thGearGarageАй бұрын
Always enjoy your channel and your ambition.
@Dr.ReasonАй бұрын
Fantastic results.
@vmoney9106Ай бұрын
- Thank you!
  @6thGearGarageАй бұрын
I have the same valve cover and it had imperfections like that too. I used VHT black wrinkle paint and it looked okay but started to flake off. I pulled the valve cover off my 87 which is less rounded and more square and sanded it down going from coarse to fine and then I polished it to a mirror shine. I should have put a 2k clear on it when I was done but didn’t and now it’s no longer pretty like it was. Get a later 22r valve cover and polish it! It would look really nice. I also ordered another factory 22r sticker.
@brianeighties4481Ай бұрын
- I would try ceramic coating after polishing. Not sure how well clear coat will stick to a smooth polished surface.
  @6thGearGarageАй бұрын
This looking great the couple questions I have tho. I see that on those side panels there's an old seal still attached. Why you didn't removed that and repaint. I don't know but I'm curious. Should this surface actually needed to be paint? Will there be any rust problems in the future?
@JustRedDudeАй бұрын
- Those seals on the top edges are a sticky rubbery/tarry strip that add a layer of cushioning for the fender that bolts on top. No need to remove/replace them as they don't dry out and are completely hidden.
  @6thGearGarageАй бұрын
Will the laser also remove remnants of a gasket?
@tedbastwock3810Ай бұрын
- Yes. It won’t remove the entire gasket, but if there is a little bit left stuck to the surface, it does remove it.
  @6thGearGarageАй бұрын
Are you going to part out the rusty frame at all? Still looking for a Pittman arm for my 2wd 87 and was wondering if the one from the 80 is the same. mine has power steering if that makes a difference.
@blainerohlfsАй бұрын
- I read that the 79-83 is different than 84+(I actually need the Pitman arm from the Ohio truck because the Oklahoma truck didn’t have one.) I will part out any good bits from the Ohio frame eventually, but first I’m going to use that frame as a place to set the 4runner body when I restore that truck.
  @6thGearGarageАй бұрын
Still waiting for you to do a valve cover in flat red wrinkle...like a Ferrari...Think the defects are oil in the cracks....Thank for the heads up on the paint...store bought never lasts...You know they say dont eat spaghetti wearing white?? I have a white truck/engine bay and would do a different color to hide the dirt ect but does look nice..for now
@drewfleming7065Ай бұрын
- I have some wrinkle paint… this valve cover might be a good candidate if I can’t clean up the crack. Yeah, I’m crazy for the white engine bay, but I think it will look good with the cleaned up 20r.
  @6thGearGarageАй бұрын
- @@6thGearGarage Has to be red...rip off LCE..lol
  @drewfleming7065Ай бұрын
Everything on that car looks better in white than blue. How do I convince you to spray the outside white? Excellent work BTW!
@deebee3901Ай бұрын
- Thanks 👍 I’m still so far away from finishing the body that I haven’t thought about getting around to painting it… but I’m leaning toward white or blue, since one of those would match the blue interior.
  @6thGearGarageАй бұрын
Could it be you have found micro cracks or casting imperfections in the aluminium of that rocker cover?
@BenMitroАй бұрын
- Yes I think that is the problem. It never showed with the thick paint over it.
  @6thGearGarageАй бұрын
- @@6thGearGarage Maybe a coat of spray putty after brushing it down with acetone or something aggressive?
  @BenMitroАй бұрын
Question, after all that prep work, why not use a 2k primer?
@nimas.1415Ай бұрын
- I used the self etching because i already had it
  @6thGearGarageАй бұрын
Leave valve cover be. Don't like white especially. In engine bay.. As long your happy with it. Good job.
@robertbevilacqua9693Ай бұрын
What was the cost difference of the 2k cans vs regular auto paint?
@glen4130Ай бұрын
- I’d say almost twice as expensive as the cheap lacquer paint.
  @6thGearGarageАй бұрын
that laser cleaner looks awesome..Id love to get one, but I bet it costs a fortune
@99fxr68Ай бұрын
- Yeah they’re a lot cheaper than a few years ago, but still start at $4k-$5k
  @6thGearGarageАй бұрын
Surprised he invested into a laser cleaner before a paint gun and air pump.
@LittleMikeStarCraftАй бұрын
- I do have a paint gun and old compressor, they still work great.
  @6thGearGarageАй бұрын
الترجمه سيئه لم أشاهد المقطع بسبب الترجمه
@user-ey5ow9xe2bАй бұрын
- KZhead translates the languages automatically. I do not know all the languages.
  @6thGearGarage29 күн бұрын
I hope Trump comes back...we need him more than ever..
@99fxr68Ай бұрын