Alex Gyver lamp 85 effects assembly without soldering from scratch - detailed video.

Complete and detailed video of assembly and firmware flashing of Alex Gyver's lamp using the set from Aliexpress (LoLin NodeMCU CH431) without a soldering iron!
My kit is no longer on sale, search for GyverLamp, Gyver Lamp kit. It is already available with delivery from Russia, and in Russian stores.
In this video I will describe and show you how to download and flash the gunner47 firmware with 85 effects into a empty controller (or already flashed), install the application from koteyka on an Android phone, assemble an electrical circuit **without a soldering iron**, make a case from pipes and shades from Leroy Merlin and even without cable ties.
Kit Unboxing Video - • Gyver Lamp kit - распа...
Video by Alex Gyver - • 🔥Такой светильник не к...
Project page - alexgyver.ru/gyverlamp/
You will need materials:
1. Electronics kit for assembly (Ali / local store / separately)
2. Sewer plastic pipe with a socket 40 mm - 2 pcs.
3. Sewer plastic pipe 50 mm - 1 pc. (household store)
4. Plug for sewer pipe 40 mm - 2 pcs. (household store)
5. Plafond "Satin cylinder" - 1 pc. (Leroy Merlin)
6. Lamp "Ball" - 1 pc. (Leroy Merlin)
7. Double-sided foam tape (or electrical tape, scotch tape ...)
Tools:
1. Hacksaw for metal (or blade, knife ...)
2. Drill bit 10mm for wood or metal
3. Nippers - the sharper the better
** desirable **
4. Elecrtic drill
5. Soldering iron and accessories (solder, flux ...)
6. Hot glue gun
Good luck!
00:00 Welcome, introduction
00:31 Downloading the firmware
02:37 Download and install Arduino IDE
04:15 Download and install the CH341 driver
05:17 Installing libraries
06:44 Opening the project and setting up the environment
11:03 Assembling the electrical circuit
18:42 Connecting and flashing the controller
20:32 Install the application on the phone
23:48 Setting up Wi-Fi
25:43 Connecting to the lamp
27:51 Connecting the button
30:58 Assembling the body
42:13 Starting the finished lamp