Finding an ABANDONED 59 F100 in a Local JUNKYARD! Why was this JUNKED?
2024 ж. 27 Сәу.
35 634 Рет қаралды
SHOP NOW: www.nineoninespeedcompany.com/
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...
Should we bring back the junkyard content?
Top tier content🫡
Yes.
Yeah
Oh hell yeah
Absolutely!!
Looks like you found a new body for your Crown Vic!
Broke my heart to see that 58/59 sitting there waiting to be picked apart.
Crazy huh
Paint the steel wheels the lighter of the two greys on the truck with the factory ford center caps looks awesome on that truck.
I painted my stock steel wheels a machinery grey color on my truck when I still had the stock wheels, and it looked a lot better than that ugly argent silver color they were originally that's for sure.
The 59 Ford is a long-bed fyi. The ranchero was available with the 351c or the 351w in 1972... along with the 400.
sir, that GS300 is a 2jz-ge, the NA variant of the 2jz-gte that came in the same car but called aristo, the only car (i believe) that only came with the 1jz-ge (NA) was the Gzx100 it's the Chaser variant that never came to the states
You’re right. I don’t even know why I said 1j. I knew that too😂 my b
Back in 1977 I bought a 1957 Ford F-100 short bed with the big Ford 6 and three on the tree. I paid 500 bucks for it. I rattle can painted it, replaced the clutch master and slave cylinder and drove it for a couple of years. I sold it to a lady who drove it from where I lived in Washington to Utah. It was a neat old truck.
Yes! Thanks for the junk yard tour. Always good. Although, I am depressed over the 59 F100. What a waste..breaks my heart.
Falken Wildpeak AT. Aggressive enough for offroad but very quiet.
I had a 1990 F150 that ran great until it got warm then had fuel problems. It was the fuel pump gasket in the tank that would leak in hot conditions
More junkyard content would be so sick
My OBS would buck when it got hot. If you laid into the throttle it would bog down and you had to ease into the throttle to get her to rev up. It ended up being the Throttle Position Sensor so maybe it's worth checking that on your Bullnose.
Hey! I had an Allante. Lol the bodies were made in Italy by Pinnafirina. They shipped them to Detroit to put drivelines in. They were a small V8. Heavy car and the V8 wasn't all that, but it sounded cool with custom exhaust. Also featured in the movie Cadillac Man, with Robin Williams.
Save it!
Love junkyard videos.
love the different styles of content, any of your content is so much fun to watch
Thank you!
Please bring back junkyard vids!
Back in the day, when i worked on fords, the 1. Map sensor was failing. That would make them buck and even lose power. They will not throw codes for them when they failed. 2. Put a fuel gauge on the fuel rail there is a Schrader valve on there. At idle should around 30 psi, and when you disconnect the vacuum hose of the fuel regular you just put on, you should read 40 psi. 3. 6 months ago, i had to install new fuel pump on a different Ford. It lasted 5 minutes and barely ran. So fuel pressure test while driving is really good way to check fuel system good luck.
Those black steelies with hubcaps is the way to go 100%🔥
Bro is so underrated
Forward leaning A pillars are gangster!!
Love junkyard vids man
Yes bring back the Junk Yard videos Craig
Sounds good!
Great video. Liked the trip to the junk yard. Bull nose looks good with the steelies on it. Needs a bigger tires that’s all
That Econoline van looks like it also shares side marker lights with 73-79 dent side F series. I could be wrong, but they look really close. Then again those marker light lenses are super affordable new.
You can use that xj6 jag suspension under a f100! Some of them came from the factory with air ride too so that’s a cheap way to make a f100 air ride. We are fixing to jag swap a 55 f100
Cadillac Allante, even I knew that! Nice know I knew more than Craig, at a brief moment. :P
Yes on the junkyard videos
You should change the coolant on the shop truck anyways as it ages coolant turns into a battery and the electrolysis starts to happen and can cause pin holes in rads and even make the head gaskets for intake fail
While I do appreciate that you wanna make street-rods and fun stuff, I love redemption videos. I love getting junkyard content and watching it get restored and redeemed and back in the streets after abuse misuse or neglect. its great content.
Falken Wild Peaks is what I ran on my 86 250, up until 2018 then I have Mickey Thompson Baja stz now and they're a good looking tire. I even contemplated BFG Baja's! Seeing your bullnose makes me want to tear into mine asap
I need that grill!! And rad support!!
Your crew cab tires and wheels would be equivalent to a 32x11,50 16.5 and i say that because I had the same thing but a set of bfg mud terrain ta's on my 78 Chevy c20 custom deluxe green and white long bed work truck, and several of my friends have tried to put the same size tire on stock round eye square body c20 trucks to find out it rubbed in the front and the rear.... But what they didn't realize is that my truck had a 2 inch suspension lift truck was originally from reading Pa and the rear end was a 14 bolt but a heavily modified 81 Chevy c30 cab and chassis 14 bolt full floating 4.10 gear rear.
I so need that door glass from that F100!! Never find a truck like that in the yards near me.
Love the content. Inspiring for what I like to do.
On that 59 it looks like the radio still had the trim ring which is also a hard thing to find.
That gmc van with the decals and the turbine wheels❤❤
great stuff thanks
If you can find em, 32x11.50s would look really good on the bull nose. The 33s look good but like you mentioned, they rub.
For those still running stock 16.5's I found Milestar Steelpro MS597 All Season LT9.50R16.5 a few years back, been really happy with them and the price is right.
❤❤ love your videos awesome content
Hey, how are the front and rear bumpers on the Fridge? I’m needing a set if they’re good and straight to restore my late-grandfather’s ‘59 he bought new. Will you be at Grand Nats?
Fairly certain that County of San Diego Refuse Disposal ticket came in a little booklet like stamps, that how you used to get into the county dump(s). That was VERY long ago! The fees now are $77, unless they went up again.
That glove box latch is the same on some jeeps
Now you are very knowledgeable and I'm not really sure but will the rims and tires off of a 80s supper duty truck work some of those fancy crome factory looking wheels were quite nice . Any ways love the channel and all that you do keep up those American classics.
Ive had the same issue with the 16.5 wheels. Mine are juat steel wagon wheels but they look good. But 400 a tire is about the cheapest i found online for a tsl super swamper. I might end up just buying some 16 inch wheels that are almost identical to mine at 200 a peice.
I have a fleet of 94-96 f-series with the 300cid and 5-speed drive trains and All two wheel drive... I would not have an automatic or any Ford V8...! The 300's are bulletproof and get great gas mileage with the 5-speeds...! Even with a full lawn service trailer being towed we get 13-16 mpg around town...!!! I'm a Chevy guy with two street Camaros and one quarter mile Camaro, but you can't beat those mid-nineties f-series with those 300's...!!!
the splash rangers only came with the fiberglass stepside beds. with a 4.0 v6, a 5 spd. and 8.8 rear they were actually pretty quick. that Lexus v8 will bolt into your buddy's Cherokee XJ wagoneer if it has the AW4 auto trans, the Lexus v8s have the same trans as 4.0 auto XJ cherokees.
craig you kind of missed the boat on the allante. coachwork by pininfarina and a 32v V8. really surprising to see one junked
I got one I had the F253 turban wills factory option and I had 16 and a 1/2 the tires and I was looking at we're BF g's and there's another tire it says like rural mudders looked like all terrain
Try Priority tire. I saw some good options on there. the black steelies does it for me
Cool to see the ranchero. im a fan of them. I got a 66 myself
Wonder if you can machine the 16.5 down to a 16, if there is enough material to work with
I like the black steelies and the tyre size fits too. I’m not a fan of really big tyres. Fit some chrome spider caps to the steelies and call it done.
I need to head out there one day and find some 67 to 72 chevy parts picked up a 72 k10
Should totally do a blown 6.9 or 7.3 idi build for the bull nose i think itd be pretty neat
Black Steelies looked sweet. Yes on junkyard content.
Loving the bullnose content
Got my small block killer shirt today..stoked!
Glad you like it! Thanks again.
Nothing like crawling through a salvage yard. Had a 57 ford. Now a 59 Apache.
The Cadillac allantes were my favorite Cadillacs❤
Someone should Crocodile Dundee check Meg, her voice is deeper than Qwegs.
I like the black wheels on it And I’m usually a fan of shiny
The shop truck, if the fuel pressure regulator doesn’t fix it, look at getting a new tfi module.
It didn’t. So that’s my next route
I run 33x12.5 17 Milestar Patagonias love them. But it is an aggressive tire
Man I'm currently driving my grandfather's 59 Ford Fairlane and he has one of them 59 Ford f100 with a cougar motor and some other goodies
You can get a lot of power out of especially that one I used to work for a Jag engineering shop
When you say “a lot of power” what do you think it can somewhat safely make..??
@@GRANITEMONUMENT any power is good for anyone
My crown Vic balanced a qtr on the throttle body while running with 2 12’ subs in the trunk😂
Interco tire corp have a 16.5 option for all their tires check them out
That 59 is a long bed. And me owning a 60 myself, I would’ve picked that thing clean if it was around me.
I got my donor car 86 LTD crown Vic running today going to put my 66 f100 on it!
You need that 59!!
Should get a moon visor for the truck
That a good truck
58 had the straight grill,59-60 had the dip in it.
Are you planning on putting the wipers back on the bullnose truck?
Yes haha I was waiting to swap to a new windshield here shortly
I want that exhaust set up on my 94 f150
I wanted a Splash as well. If I can find one reasonable, I will swap it.
Hello Craig, you should take a look on TC2000 cars from Argentina
the only thing your missing for the whole "work truck" look is the toolbox in the bed
Yes you should show the junk yard I have a few parts left from my bull nose that has the same color interior in it let me know if you need some parts
I also have the under hood storage box that came on the bull nose I don't need anymore
Sheesh that 1J is cheaper than my PI 4.6 by an entire $350 bucks!!!
From a member of the rust belt it is quite sickening to see the condition of vehicles in your junk yards.. Stuff is nicer than the stuff still on the road here
Get 33in bfg mud terrains on 16in rim
$1,000 or trades for universal wheels or 90 Chevy trucks and or parts truck is a 292v8 4spd manual shift transmission
Steels!!! Steels all day Craig!!!!! Truck looks better and will drive better.
Love the junk yard
I actually think it looks better with the black steelies look at some 33,10.5 bfg open c, or Cooper discover sst,
that's a 2jzge vvti. it has the tiny rods only good for around 400. vs the non vvti being good for 700 and gte 1000hp
When i see an automatic idi diesel truck i take the vrv valve from tge injection pump. Those things are expensive and fragile plastic.
Craig: Just another day in the California junkyard. Rust Belt car lovers: 😢
16.5's are a pain in the neck these days. As a Weld wheel fanatic, I see so many sets I'd love to have but that tire size turns me off. Interco still makes some selections of 16.5's but hang on to your wallet - like everything else these days they're not cheap.
I’m gunna look into getting them cut into 3 piece wheels. But id expect it would rack up $3-4000
that refuse disposal fee ticket is for taking stuff to the landfill
It has been said " variety is the spice of life" ( paraphrasing). Mix it up- I'm like a kid in a candy store in a " junk"/ recycle yard, but to each his/ her own.
16.5's are getting impossible to find. 4 wheel parts has a super swamper all terrain 33 12.50 R16.5 but they are over $500 a piece
My LKQ stops at 1995..maybe I'm looking in the wrong spot
Just drove my ‘69 F250 from Sacramento to Northwest Arkansas. Not a hiccup. Just letting everyone know.
Get some headers for the bullnose
Mine has stainless shorties
Whatever camera you used for your pov… needs to be changed lol. They fish eye dizzying effect when you turn your head is killing me 🙈
You lucky